i was wondering if it was possibloe to switch of and on flight mode using a button. couldnt find this option. the significance of this is that those who have dual sims can switch between networks easily. i know there are today profile manager avilbale like phonealarm and zenphone but i dont see a point using them as they just clogg up my today screen. im just trying to keep as little aplications on there as needed. someday ill get myself to remove pocktplus if i can find a good close program. ive tried magic button and battery pack both are no where close.
I use tel-on-off.exe from www.freecabs.de, a very small util. I bound it to a hardware button using AEBPLus, found on this forum. When I now press the calendar button twice, the phone radio shuts down and I go into flightmode. Pressing twice again reactivates the phone and shuts flight mode down.
You can also find a flight mode switcher on the site of Crino, who made Call SMS Blocker. You can find that thread with his homepage link on this forum.
That link doesn't seem to be working, try this one! http://www.inntalinfo.de/apboard/useraction.php?action=get_upload&id=252
thanks found tel.on-off.aebplus caused a mess with my phone last time so not installing that. another question i have is..
how do i display on today screen which operator is being used at present. (i.e. when i switch from orange to o2 it should show me on screen in big leeters)
Use pocketzen. gives u a lot of functionality
http://zendrui.free.fr/
hi guys,
Recently the phone was in my pocket and loads of things were opened and pressed accidently... now it appears i cannot switch off my XDAIIs by just pushing the power button.
All i can do is push and hold for like 3 seconds and it turns the light off, i've exhausted all the options and menus, but still cant find anything!
Does anyone know a way to fix this please?
:?:
I'm not sure what the experts will say but I'd do a hard reset after backing up my data.
Steve
I take it you've tried a soft-reset? If so, a hard-reset may be the only option. I'd look into enabling button lock, or buy a hard metal case which will protect your PPC and also prevent the buttons from being pressed!
My mate killed his pda by sitting on it in his back pocket!
a hard reset fixed this problem, thanks!
Same Problem!
Hi to the list,
i have the same problem as Killer_Bit had.
I've done all the suggestions posted for this topic as making an hard reset but i still have the problem.Is there any other suggestion that can help me to solve this dam problem?
Any help will be really apreciated.
Ciao
Enzo.
Maybe take the battery and the backup battery out. This would allow the device to become completely inert. Maybe that would work. You can't do it any harm
I may be misreading this, but if you press for 3 seconds it will turn the backlight off. To turn it off press the off button quickly and release it.
I do sometimes get it where when I press the off button it takes a few seconds to turn off, but not all the time.
Hi Guys,
no way for me it does'nt want to work.
Last night i took off the battery for all the night so the backup battery could even be flat.
This morning i replaced the battery and retested it but it stiil won't switch off.
It switch on but not off.
Any other suggestion?
Thanks.
Enzo
ik8ozv said:
Hi Guys,
no way for me it does'nt want to work.
Last night i took off the battery for all the night so the backup battery could even be flat.
This morning i replaced the battery and retested it but it stiil won't switch off.
It switch on but not off.
Any other suggestion?
Thanks.
Enzo
Click to expand...
Click to collapse
I HAVE THE EXACT SAME PROBLEM MATE!
Mine worked after a hard reset for about 1 day but nows it back to normal wont turn off but will turn on and dimm the backlight after a long press.
Also i have pda.02.co.uk trying to load up every second of the day! Could this be a button pressed in perhaps somewhere?
Cheers!
I had same problem with my Qtek9090, and i found solution.
Unfortunately it was hardware problem, and i had to disassemble whole machine.
Explorer and ok key was also not working, so i took them out and peeled film of from circuit board. There was some dirt and oxidisation undeneath button parts.
I cleaned buttons and assembled machine back and power button also started to work like before.
I believe that those buttos leaked current and affected also power button function on pda.
What ever it was, it´s working really fine now.
So if you are not inclined to take your pda apart, take it to the repair shop.
Cheers!
ik8ozv said:
Hi Guys,
no way for me it does'nt want to work.
Last night i took off the battery for all the night so the backup battery could even be flat.
This morning i replaced the battery and retested it but it stiil won't switch off.
It switch on but not off.
Any other suggestion?
Thanks.
Enzo
Click to expand...
Click to collapse
Hi ik8ozv and Killer_Bit,
A friend of mine has the same problem... I was wondering if the installed ROM has something to do with it or not... So write me please what kind of ROM do you have?
Also Killer_Bit, how did you perform a hard reset without using the Power Button? (Soft reset and Record and Camera button?)
Thank you in advance for your feedback.
Regards,
tetriska
OK. Finally, getting somewhere. Seems like it is a hardware problem, needs cleaning... Is there's anyone else out there with a successuful cleaning/repair of similar problem?
Thanks.
Opening the device and cleaning the front buttons helped me too.
It seems to be the only solution.
My XDAiiS screen goes blank and drops the bt conection, (not very useful if your using your handsfree or getting directions from the TomTom navigator.). I have gone into the power setting and unchecked turn off device if not used on external power.
No effect
Cheers
K
I assume it might be something with the registery, either try soft-resetting and see what happens, or just backup your needed things and do a hard one .
Hello,
Can someone help please, I’ve overclocked my Qtek S200 (Prophet) to such a speed that my phone is not capable to run on.
The difficulty is, before I have done this I foolishly “Registered” in start-up menu for the overclocking software to run at 288 MHz.
Now when restarting, the phone is reaching a point of Window Mobile and then it’s either stops dead or restarting it self constantly.
I can guess the solution but don't know how to do it I need somehow to stop Overclocking software to be used during a boot up.
Or maybe even a hard-reset. (I did that already but it’ freezes at the point where I can see 3colors on the screen and nothing further. Any suggestions please?
The easyest way is to perform a Hard Reset. Make sure you have the power button, the camera and the comm manager button pressed while reset ing the S200. The other way is to take a look at the startup folder and see if there's a program that is automaticaly launched on startup that changes the speed of the device. The only thing you have to do is delete that entry...
Hope it helps.
RE: SOS
I did try it to do hard reset the way you said, in the end this really helped.
I removed the battery and left it for about an hour. Then plugged my USB cable, done what you normally do on Hard Reset, by pressing Photo button on the side and Comm. Button and pushed the pen. When phone stopped at the point where I could see 3 colours, at the bottom USB text appeared. I re-install new ROM and magic! My phone is back from the dead
on my tp2 i have the energy rom installed and set keyboardconfig to set the send key when held to go to a task manager the vol keys to scroll and hold to change volume but the send key just stopped working. it feels like im chacing problems round in circles with this phone where its one thing after another. i have advance config to have most things set to "recommended" re performance bu re the send key i disabled the kbdconfig and set "buttons" as none so theres no chance of a conflict but it just wont work. the best i got was sitting it for 5 mins without the battery in one time and it worked on a restart for a while. is there anything i have set wrong that im just not seeing?
im not getting to the bottom of this in fact the problem is worsening. menu and back key no longer do what theyre supposed to and they dont register in kbdconfig either. only the hangup button functions. i have tried memmaid in case it picked up a bad registry entry or something but nothing. Please help someone i am at a loss as to what else to try.