Develop Bugs

RUU run problem

everytime i try to run an RUU on my computer to upgrade my ROM i get an RUUWrapper.exe - Application Error stating
'The application failed to initialize properly (0xc0000135). Click on OK to terminate the application'
any idea why im getting this or how to fix it so i can upgrade my ROM?

ahhhhwhoa said:
everytime i try to run an RUU on my computer to upgrade my ROM i get an RUUWrapper.exe - Application Error stating
'The application failed to initialize properly (0xc0000135). Click on OK to terminate the application'
any idea why im getting this or how to fix it so i can upgrade my ROM?
Click to expand...
Click to collapse
idk about how to fix it but u may wanna try the sd card flashing method which is found in the wiki

well it seems its only with ROMs that are custom cooked. I took it back to the windows 6 ROM released by at&t and it ran fine and everything worked, but everytime i try to run a Binkys RUU or Hermes MRH it gives me the error again...

Install the latest .net framework on your PC....this error is a classic.

all you need is .NET framework from Microsoft installed. Version 2 and above works.
Edit: What he said

please i need help with DiamondCustomRUU.exe. init error

ok i decided to take the plunge in the dodgy world of flashing
and as luck would have it.......
im following the bible link
http://modmydiamond.info/index.php?option=com_content&task=view&id=15&Itemid=26
i have add the hardspl and confirmed it in the boot loader page tri color.
i have downloaded the *DiamondCustomRUU.exe* file quite a few times and it give this error every time i double click on it.
*The application failed to initialize properly (0xc0000135). click on ok to terminate the application*
the currrent state of the phone
------------------------------
everything on the phone apears to be workng just fine
however there is no touch flow 3D thats gone LOL
what can i do ?
is DiamondCustomRUU.exe the only file that can sort the radio ?
am i doomed ?
yes im slightly panicing too
please help
thanks in advance
HD
the microsoft activesync has synced and on green. connected

Ok thanks for reading. my heart attack is quickly gowing away.
the problem is solved.
the solution is to install .Net 2 from microsoft and install it.
im now moving forward again
HD

WWWWOOOOWWWWw
i done it
wicked you guys are DOGz NADz mate
wwwwooooowwwww
thanks
HD

Nice to see someone can solve his/her problem without any help.
As you can see, it's not that difficult

It still does not work in Win XP x64
I have tried installing .Net framework 2.0 or 3.0 but still fail......

jackycct
if are you trying to flash your phone and failing at the radio section
like above and you are seeing
i have downloaded the *DiamondCustomRUU.exe* file quite a few times and it give this error every time i double click on it.
*The application failed to initialize properly (0xc0000135). click on ok to terminate the application*
Click to expand...
Click to collapse
then download .net from microsoft and install it to your PC not the phone.
the developers are using functions from within .net hence why it is needed
if you have any other problem then please let us know
HD

.Net framework is installed in Win XP x64
I did install the .Net framework in Win XP x64 (64bits, not 32 bits) on my PC.
Before installing the .Net framework, the error message *The application failed to initialize properly (0xc0000135). click on ok to terminate the application* was shown.
After installing .Net framework 2.0 or 3.0, then it crashed and showed "DiamonCustomRUU has encountered a problem and needs to close. We are sorry for the inconvenience."

Win XP x64
Click to expand...
Click to collapse
im not all that clued up on Win XP x64 .net stuff.
maybe that version uses different methods call handlers or mem locations.
sorry i cant help
HD

Artemis noob needs help for WM 6.1 upgrade

Hello,
i just got my artemis and tried to upgarde it...
But any Rom I downloaded causes errors while flashing...
Something like USB connection error [260] and something like file corrupt error [270]...
I found also how to unlock cid but that doesn´t work to...
I use Vista and the new mobile device center 6.1 and my artemis is an german o2 version.
I get the same errors if i use XP and activesync 4.5....
Any suggestions????????????
I don´t know how to go on. And I didn´t find any Thread that helps me...
Hope anyone could help me...Thx!

Hi ,
First , i sugger you to use XP . I never can upgrad with Vista ( i have vista ultimate )
I do this with xp :
1.First be sure activ sync is active when you put your p3300 on your usb
2.Download this version of uspl (it always work for me with this version ) :
http://www.megaupload.com/?d=PTFMGKAD
3.Choose your rom . I suggest you this :
http://forum.xda-developers.com/showthread.php?t=401062
4.Unzip the first file you download in 2. You will find a file called RUU_USPL_signed.nbh. Delete it and remplace by the .nbh you dowload in 3.
5.Run start_uspl.exe

You CAN Flash in Vista
Read this thread and you wont have any problems flashing in Vista:
http://forum.xda-developers.com/showthread.php?t=313001
Just remember to remove your memory card before you flash.

dmro said:
Read this thread and you wont have any problems flashing in Vista:
http://forum.xda-developers.com/showthread.php?t=313001
Just remember to remove your memory card before you flash.
Click to expand...
Click to collapse
ofcourse u can flash with vista... even with VISTA ultimate...
jst make sure u have windows mobile device centre running... and that the pocket pc can connect to the vista pc...
i have been using VISTA ULTIMATE for the past 8 months and no problem... its cool..

Same problem
Hi,
I have the a P3300 as well, and tried to follow the same instructions, but I still get the same error 270 image corrupt, it goes to 3% and sometimes to 6% and stops giving that message.
Did you manage to get it work by any chance ????

theorthodontist said:
Hi,
I have the a P3300 as well, and tried to follow the same instructions, but I still get the same error 270 image corrupt, it goes to 3% and sometimes to 6% and stops giving that message.
Did you manage to get it work by any chance ????
Click to expand...
Click to collapse
I can't be sure but it may be something to do with XP SP3. I had the exact same problem but when I tried it on another laptop (same hardware) with XP SP2 it worked fine

Errors Numbers : 266 & 264 & 302 while Upgrading PPC

I decided to tell something about my experience today about these Error numbers while Upgrading my Hermes (T-Mobile MDA VARIO II) .
Dear friends….i read Upgrading instuguidances again and again but there is a gold issue I did not notice untill today.
whenever I put my PPC into Boot Loader Mode and connect it to PC to upgrading these Errors appear immediately and I was in trouble what those errors are.
It checked the cable or some different Official ROMs but in fact I noticed all growth from Windows.
Yeah…
I am in winder why Microsoft does not make it possible upgrading PPC over Windows XPSP3 !!!
Whenever I run RUUWarpper on Windows XP Service Pack 3 these errors shown while I was sure about correct cable and correct ROM and ….
Sooo I want to share it to all peoples this gold notice :
Upgrading PPC is just possible on Windows XP Service Pack 2.
not Windows XPSP3 nor Windows Vista.
I think it is good for someone else that search and find these Topic in database of this nice/great Forum if same problem has appeared to him.
Here is some pictures of those errors & some proof if is required.

Mate, there has been a heap of threads on how to upgrade with Vista. It Works.
I have, on occasion, upgraded my Hermes on Win XP SP3 successfully. If it doesn't work for you, try the sd card method, you have to install Hard SPL V7 first, I tend to use this method more as it seems safer to me... Especially for the radio rom.
All you need to do is search and you should find the answers you seek...
Cheers...

So really can you Upgrade your Hermes on Win XP SP3 successfully?
you mentioned some keywords but could you please show me those links exactly how to upgrade our Hermes on XP SP3 too?
I think this forum is so noisy i can not find it myself.
I really need Upgrade HERM300 (T-Mobile MDA Vario II) on XP SP3 on my Laptop.
its boot loader shows IPL-1.04 & SPL-2.10.olipro
is it enough or not?
about 1 hours after reading your post I tried again upgrading on XP SP3 and put it on Boot Loader but nothing. (above Errors had shown again and again)
i would be appreciate if you show us that useful links (upgrading over XP SP3 normaly like XP SP2 successfuly)

Mate, as you have Hard SPL installed (SPL 2.10) try this instead...
1. Format a 2Gb or less sd card FAT32. Copy the .nbh file of the rom you want onto it and rename to "hermimg.nbh".
2. Put sd card into Hermes and reset to bootloader - power, OK and reset with stylus.
3. When prompted hit the power button to flash new rom.
Just make sure you have 50% or more battery though.
I find this method the easiest way of flashing roms as there is no real involvement of the PC except to format sd card and copy the .nbh file across. You'll get no sync errors, have no worries about resets/blackouts ar the usb cable being pulled. About the only ways to stuff this up is to reset in the middle of a flash or to have a flat battery.
Cheers...

reza_sadeghi said:
So really can you Upgrade your Hermes on Win XP SP3 successfully?
you mentioned some keywords but could you please show me those links exactly how to upgrade our Hermes on XP SP3 too?
I think this forum is so noisy i can not find it myself.
I really need Upgrade HERM300 (T-Mobile MDA Vario II) on XP SP3 on my Laptop.
its boot loader shows IPL-1.04 & SPL-2.10.olipro
is it enough or not?
about 1 hours after reading your post I tried again upgrading on XP SP3 and put it on Boot Loader but nothing. (above Errors had shown again and again)
i would be appreciate if you show us that useful links (upgrading over XP SP3 normaly like XP SP2 successfuly)
Click to expand...
Click to collapse
Yes you can upgrade it in XP SP3. Do you have .net installed in the pc? If you dont, then you will be getting errors too.

ultramag69 said:
Mate, as you have Hard SPL installed (SPL 2.10) try this instead.....
Click to expand...
Click to collapse
Wonderful.
and I like this method to upgrade PPC and prefer it.
I will try it as soon as i came back home and format 1GB Memory SD Card.
an Special thanks about your nice clear guidance.
i will back and declared any results.
ai6908 said:
Do you have .net installed in the pc
Click to expand...
Click to collapse
Yes.
.NET Framework 2.0 SP2 and 3.0 SP2 is installed on my XP SP3 shows on Add/Remove Programs on Control Panel.
I am sure.
and by your accepting we can upgrade PPC on XP SP3 , I resolute and will search and search again to find any solution why i get those errors on XP SP3 while you both told me upgrading is possible.
dear friends ,Thanks for your communion.

What you experienced was what I just did went thru
Had the same thoughts with the problem, I get Error [264], I also thought the CID-unlock issue. Tried many ways to get thru but fail in the end. Well yea, your piece of notes enlighten me. I will try on XP SP 2 and below, gotta find the machine some where first
Thanks for this post.
Reza_Sadeghi said:
I decided to tell something about my experience today about these Error numbers while Upgrading my Hermes (T-Mobile MDA VARIO II) .
Dear friends….i read Upgrading instuguidances again and again but there is a gold issue I did not notice untill today.
whenever I put my PPC into Boot Loader Mode and connect it to PC to upgrading these Errors appear immediately and I was in trouble what those errors are.
It checked the cable or some different Official ROMs but in fact I noticed all growth from Windows.
Yeah…
I am in winder why Microsoft does not make it possible upgrading PPC over Windows XPSP3 !!!
Whenever I run RUUWarpper on Windows XP Service Pack 3 these errors shown while I was sure about correct cable and correct ROM and ….
Sooo I want to share it to all peoples this gold notice :
Upgrading PPC is just possible on Windows XP Service Pack 2.
not Windows XPSP3 nor Windows Vista.
I think it is good for someone else that search and find these Topic in database of this nice/great Forum if same problem has appeared to him.
Here is some pictures of those errors & some proof if is required.
Click to expand...
Click to collapse

dear ferioz...
after those days passed what about your siuation?
has your problem solved using Windows XP Service Pack 2 ?
did you find any System running XP SP2 and try upgrading your PPC ?

If you have trouble with the pc, try the SD card method. Easier and I believe safer too as no-one accidently resets the pc in the middle of a flash. This method is a MUST when upgrading Radio ROMs...
For the PC though, you might need to update your .net framework to 3.5.
Cheers...

dear ultramag69...
You recommened this safely nice upgrading method and wrote a how to on this post and I love it and thank for suggest it.
I did not have enough time to upgrade and change my Hermes ROM recently from December 2008 so I did not try this method still cause PPC will go to Factory Default settings and programms installed will be ununstalled and I hate installing again and again.
anyway...
so Thanks for your nice answer and remind.
I suggest others try this method too instead of using PC running XPSP 2 specially this days mostly use Vista running Windows Mobile Device Center instead of XP running ActivSync.

Hellllllllp,260 error!

hi
i'll install a rom on my jasjam in win 7 but this can't connect to my phone [260 error] help me plz.. i can't change my windows..
and i have windows mobile device center and i'm sure my phone is connect to pc.. but i see 260 error..

Install Hard SPL V7 then use sd card method...

i´ve had the same problem in win 7. It was connected untill the device was set in the 3-colour-mode, and after a while error 260 was shown. I tried the same in win XP with ActiveSync 4.5 and everything was right. So if you have a pc with win XP, just try it there.

Odd this works fine for me in win7 but every once and awhile I'll get the same thing but all I have to doo is relaunch RUUWrapper and it works or just do it in tri screen.

ultramag69 said:
Install Hard SPL V7 then use sd card method...
Click to expand...
Click to collapse
Do exactly what Ultramag says or you run the strong chance of destroying your phone. See http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners for details.

use the [Easy Hard-Spl v7 beta v0.1] by qwasde2
it,s really usefull i tryed it,s by me
it,s for win XP and vista and se7en users
i,am not joking here is the link
http://forum.xda-developers.com/showthread.php?p=5136858#post5136858

qwasde2 said:
use the [Easy Hard-Spl v7 beta v0.1] by qwasde2
it,s really usefull i tryed it,s by me
it,s for win XP and vista and se7en users
i,am not joking here is the link
http://forum.xda-developers.com/showthread.php?p=5136858#post5136858
Click to expand...
Click to collapse
TNXXXXXXXXXXXXXXXXXXXXXX 100% WORKED.. Xx

Justphemy said:
TNXXXXXXXXXXXXXXXXXXXXXX 100% WORKED.. Xx
Click to expand...
Click to collapse
no problem