HELP!!! Cant Update dash OS to WM6 - HTC Excalibur

I have an HTC S620.
Its ROM Version is 1.11.405.4
I would like to know how to update the rom version so i can install the T-Mobile WM6 Upgrade on it.
Thx.
-Jas

already discussed at length. just read up on it here after you cid unlock your phone.

What if your phone is already CID unlocked & it still won't load? That is what is happening to me.........
Phone (HTC s620) is SIM & CID unlocked by GSM liberty & it still gives me the "invalid vendor ID" error. VERY frustrating!

Warthogdriver said:
What if your phone is already CID unlocked & it still won't load? That is what is happening to me.........
Phone (HTC s620) is SIM & CID unlocked by GSM liberty & it still gives me the "invalid vendor ID" error. VERY frustrating!
Click to expand...
Click to collapse
ditto whats happening to me!!!

Did you manage to flash yet i am in the same boat totally unlocked and paid £ 20.00 and vendor id still causing the problem

No...it won't even allow me to flash with the bootloader...."invaild vendor ID" Aaaagggghhh..............paid $38 for this!!

I can upgrade/downgrade "AT WILL" by following the info at this post !!
http://forum.xda-developers.com/showpost.php?p=1089887&postcount=1
NOTE: ... Step # 3 is a must whether you are upgrade or downgrade !!! ... always run it before executing the OS ROM !!!
... substitute step #4 with the ROM of your choice !!

UnicornKaz said:
I can upgrade/downgrade "AT WILL" by following the info at this post !!
http://forum.xda-developers.com/showpost.php?p=1089887&postcount=1
NOTE: ... Step # 3 is a must whether you are upgrade or downgrade !!! ... always run it before executing the OS ROM !!!
... substitute step #4 with the ROM of your choice !!
Click to expand...
Click to collapse
It won't even run the bootloader!!! This is what I am trying to say! I can't get past this step!!!

Related

CID locked or not ?

OK, perhaps a noob question, but looking for two days to find a solution to my question now:
How do I determaine if my device is CID locked or not.
Searching throug this forum / Internet has not brought me any closer to determining if my HTC p3300 device is CID locked or not.
Please help
hi
i also want to know how to determine if your device is CID locked/unlocked.
sorry,what is cid lock????
Hi Guys,
Visit following link http://wiki.xda-developers.com/index.php?pagename=Trinity_BootLoader
Use "info 2" command. This will give you the CID of your device.
Some months later .....
My Artemis is suposed to be cid locked (My mobile provider is on the box, on the terminal, on the startup screen, ...), however I hve phoned to HTC support and they say that my serial number is of a "free" terminal.
So, I don't know if my terminal is CID locked or not. From your suggestion, if a CID number is given, does it mean that the terminal is locked? Which is the answer for CID unlocked?
As I would like to upgrade to WM6 without losing the warranty, I'm not sure if I should get the HTC oficial upgrade or my provider oficial upgrade. Who is giving the warranty to me: my provider or HTC?
Thank you very much indeed
aqeelhaider said:
Hi Guys,
Visit following link http://wiki.xda-developers.com/index.php?pagename=Trinity_BootLoader
Use "info 2" command. This will give you the CID of your device.
Click to expand...
Click to collapse
I don't know the answer to your question, but why not just unlock it anyway ?
If it is locked it will be unlocked, if its unlocked it will be unlocked. End result = CID unlocked.
Seems simple to me.
have a read of my old thread, may help you.
http://forum.xda-developers.com/showthread.php?t=345134

How Unlocking your Phone when you only have access to the bootloader ??

Hi, my question is : how can i unlock my phone when i have only access to the bootloader.
My phone freezes on second splash screen and i can't put a new firmware cause it's locked (294 invalid vender id). Thanks a lot. ++
not that i know of
also vendor id have nothing to do with sim lock
kinda trikcy for people to help you when you give no info about
what device or rom you use or try to use
the flash exe often comes in versions with _noID.exe in the end thats a good step on the path to flashing with a rom by another operator
Hi, I've got an HTC Mteor mobile phone
I had Firmware 1.32 and i tried to upgrade with 1.34. But firstly i must upgrade the SPL by v1.09. After that i tried to upgrade with 1.34 and i have always the same error : 294 Invalid vender ID.
I tried several roms (1.13, 1.32, 1.34) and i have always the same problem.
I tried also to upgrade the phone by putting the rom on my SD card (BREEIMG.nbh) but it doesn't work (error : not allow).
I don't know what to do. Thanks a lot for your help. ++
Hi, does anyone have an idea about my problem ? Thanks a lot. ++
Hi, nobody can help me ? My mteor isn't working anymore. Please help !

Do Not flash your Artemis with a different carrier/cooked Rom without cid unlocking

Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rs314.rapidshare.com/files/102261908/RUU_Artemis_O2_UK_3.4.206.2_4.1.13.50_03.06.90_Ship.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Hi Folks,
Firstly many thanks for everyone's freely given time! Great Forum!
There seems to be a lot of confusion about who and what can be flashed with the German official ROM and then with Bepe's creation.
Can we try to clear some of the ambiguity for us simple folk? Might stop some of the repeated questions littering threads in both related artemis sections.
So, many thanks to anyone who can clarify the situation by providing definitive answers to the following questions!
(1) Can an 02 Orbit from, say, the UK or Holland be flashed with either the German and/or Bepe's ROM, even if it is CID Locked (i.e. same devcie and carrier, different country).
(2) Can a non-Orbit O2 device be flashed with either the German or bepe's ROM, even if it is CID Locked (i.e. different devcie but same carrier).
(3) Is there a fall back Rom available for non-German O2 Orbits should the upgrade fail?
Again, many thanks for your time.
Cheers - Adam.
Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...
Pocha said:
Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...
Click to expand...
Click to collapse
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?
Take a look to this post http://forum.xda-developers.com/showthread.php?t=299154 I tried it, and now I have wm6 on my HTC P3300, it's true that you can't have upgrades to radio or extrom, but meanwhile I can use wm6
kaemon said:
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?
Click to expand...
Click to collapse
cid = country id i.e. locked to that country/language/vendor thats why cid needs unlocking before flashing diff any of aboves roms.
imei checker
is it just me or is any one on this forum a bit sceptical of a merchant who so brazenly operates their business under the assumption that all potential customers are all fraudsters/criminal scum? is there no - more customer friendly- merchant who can perform this much valued service?
my first serious post!
xan
My HTC has no vendor since I can use all SIMs from different vendors, now I upgraded from HTC Spanish version to HTC WWE version, so Vendor and Language (plus location?) locks are disabled?
meschle said:
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here http://www.imei-check.com/c3unlock.php
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.[/Q
HI I TRY TO FLASH MY HTC P3300 (BRICKED) WITH FACTORY ROMS AND NEGATIVE RESULT THE PROCESS STOP AT 2%.
CAN ANYBODY HELP ?
Click to expand...
Click to collapse
Hello,
I would like to Upgrade my O2 XDA Mini S with Windows Mobile 6 (localized / German version). I hardly searched for such a WM6 Upgrade but there seems to be no final version for my device and german language.
I figured out that there is an WM6 OS Upgrade for the XDA Orbit and XDA Trion (coming soon). Might it be possible to flash only an OS-ROM for WM6 extracted from one of these O2 ROM updates? I was able to extract the OS-Image and I already backed up my current ROM using aWizard. aWizard also supports flashing a single OS-ROM only.
Some people in this forum already said I might brick my device. Is it possible or not to flash the OS ROM? Is it risky to give it a try?
Do you know a final working German Upgrade for the XDA Mini S (Qtek 9100)?
Best Regards
Gabriel
Hello
I am in Bootloader mode right now and I started the updater but it says it can't connect. I see the device in Windows and my Artemis says it sees a USB connection (it says "USB" on the bottom of the screen in the white stripe).
What do I have to do for it to start working for a change?
I think I found the problem: First, it would be wise to close mtty . Then it is important to reboot and after entering Bootloader mode to connect USB not while booting. After trying it a dozen times it suddenly worked.
Please, could someone explain how I can unlock the CID with USPL? It starts the batch, when it's done I have a black screen with the Linux penguin and it says loaded. When the RUU tries to connect, though, the device doesn't respond. So I take it the process doesn't actually get finished...
I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days
Hi I Try To Flash My Htc P3300 (bricked) With Factory Roms And Negative Result The Process Stop At 2%.
Can Anybody Help ?
Just to inform you guys that i tried the USPL Method 3 times and always got an error message UPDATE ERROR (i think it was error number 270 ??).
Well, that was because after the DOS mode went until 100, and the dialog box for the ROM Update Utility appeared, this dialog box ask to wait for the PDA to be activesynced before presing the "UPDATE", so i was waiting for the PDA to reconnect to activesync (while in a black screen mode) before pressing update . THAT was the mistake. Don't wait for it to RE connect to activesync (strange right ?) and just press the NEXT and UPDATE without waiting anything.
THEN it worked i just upgrade to WM6 without VENDOR ID error anymore thanks to the USPL method
just got a dopod m700 for my wife i know it is a g4 ppc hence will this zip file work on it to get the cid unlocked or do i have to follow a similiar procedure as i had to for my wizard
sorry i got my answer
please ignore my earlier question
fout said:
I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days
Click to expand...
Click to collapse
Hi there,
any pointer to this fool-proof way?
A foolish GioVAX
****ed up my artemis with this rom by upgrading stucks in loading mode WM6 screen. Can access bootloader but it always tell me upgrading again that i have the wrong rru....
CAN ANYBODY PLEASE UPLODE THE ORIGINAL WM5 ROM in GERMAN by htc for Artemis
(NOT Orbit oder MDAIII)
OR where can i get the original rom to downgrade????
Please help
thanks
Last night I flash my Dopod M700 to WM6 but after reboot it only enter to the boot flash screen showing IPL SPL 1.11 OS 3.7 etc......
I did unlock the CID but the flashing of WM6 seems not ok.
Then I enter to the bootloader mood and flash the WWE WM5.0 of HTC M700 rom. It did turn the M700 back to WM5.0 and then I flash it with WM 6.0 again.
However, I forgot to unlock CID again before flashing. Then now the device stuck in the boot screen with SPL 1.28 OS 3.7 etc......
I still can enter to bootloader mood, but I have tried to heal the device by flashing it with the WWE WM 5.0 rom of HTC M700 again. But it cannot be flashed again!!!! Error message came out that the rom is not for my device!!
Help!!!!!!!!!
Is the wm5 wwe rom the factory rom for your device or are you from another country?

Shall I update to marshmallow?

Guys, I got my m8 about 5 days back. I think it's international Taiwan version. I have attached the images of current software version I am on.
Currently the phone is asking me about 3 very small updates available. I have attached that image also. I don't know what these updates are for.
Shall I update?
Will my phone remain unlocked after these updates?
If after these updates I get prompted for real marshmallow update, shall I update to marshmallow.
Does marshmallow offer much better and some desirable features which we currently don't have?
Btw, I am currently highly satisfied with my current lollipop version.
This thing has really surpassed my expectations. I previously had LG g pro and Xperia z ultra.
Yes, I would definitely update. The phone seems smoother and less laggy on android M. A few new features. Lollipop felt like a beta version of M.
There is really no point to not update.
lekhwani said:
I think it's international Taiwan version.
Click to expand...
Click to collapse
That's not Taiwan version but Asia WWE
ckpv5 said:
That's not Taiwan version but Asia WWE
Click to expand...
Click to collapse
I installed the 3 small updates. Phone prompted me to restart.
So I restarted.
Then I again check software updates and get this prompt:
After hitting the download button, I let it download as it starts downloading some 1.14 gb update. I also put it to charge.
But when after an hour so when I picked up the phone got the message given in second attached picture.
Can someone guide what is the issue?
That means your device is not the original Asia WWE ... I guess you don't bought a new device from authorized HTC dealer.
To know which device that originally is, you need to get the fastboot getvar all result.
Also what's written on the bootloader
ckpv5 said:
That means your device is not the original Asia WWE ... I guess you don't bought a new device from authorized HTC dealer.
To know which device that originally is, you need to get the fastboot getvar all result.
Also what's written on the bootloader
Click to expand...
Click to collapse
It was a new sealed pack I got from eBay. But why it throws up the second message about variant. (I mean when it says mm software update available) ?
It says an update available because the software version no. installed on device is 4.19.707.4 and there is an update to 6.14.707.1
But the second message says it can't install the update because the model-ID in incorrect. It expect model-ID for 4.19.707.4 which is 0P6B11000 but your device may have a different model-ID
That's why we need the fastboot getvar all to determine your original device variant
ckpv5 said:
It says an update available because the software version no. installed on device is 4.19.707.4 and there is an update to 6.14.707.1
But the second message says it can't install the update because the model-ID in incorrect. It expect model-ID for 4.19.707.4 which is 0P6B11000 but your device may have a different model-ID
That's why we need the fastboot getvar all to determine your original device variant
Click to expand...
Click to collapse
But why doesn't it check for the compatible version automatically.
I mean it should say software update is not available for mobile.
It shouldn't prompt in the first place.
The update should automatically check which version or software or hardware I am on.
Btw I have hit the download button again and it's downloading. It's been about 10 minutes and 13% progress.
If this doesn't work this time again, I suppose will have to do getvar thing.
Btw, can the information given on following link solve my problem?
It says don't restart after installing 3 small updates.
But think that guys problem was a bit different
https://www.reddit.com/r/htcone/comments/41809r/marshmallow_update_question/
Those questions only HTC can answer. If I am HTC .. I don't expect the device is modified and I won't check whether the device is modified or not. Most important what is the software version no. because things like model-ID is something in the hardware not the software and users are not supposed to modify hardware.
Sorry ... I don't read outside link ... only XDA for problem reported on XDA.
If you don't feel like to fix it ... just hit don't install, don't check auto checking and block the notification ...
Good luck .. I have to go now .. bed time.
Maybe someone else will help you.
ckpv5 said:
Those questions only HTC can answer. If I am HTC .. I don't expect the device is modified and I won't check whether the device is modified or not. Most important what is the software version no. because things like model-ID is something in the hardware not the software and users are not supposed to modify hardware.
Sorry ... I don't read outside link ... only XDA for problem reported on XDA.
If you don't feel like to fix it ... just hit don't install, don't check auto checking and block the notification ...
Good luck .. I have to go now .. bed time.
Maybe someone else will help you.
Click to expand...
Click to collapse
Thanks for your help so far. Actually its bed here for me as well.
Am already in bed actually.
I have only very occasionly done those fastboot thing.
Suppose will have to do it through laptop tomorrow (when I find time)
Will report here again.
ckpv5 said:
Those questions only HTC can answer. If I am HTC .. I don't expect the device is modified and I won't check whether the device is modified or not. Most important what is the software version no. because things like model-ID is something in the hardware not the software and users are not supposed to modify hardware.
Sorry ... I don't read outside link ... only XDA for problem reported on XDA.
If you don't feel like to fix it ... just hit don't install, don't check auto checking and block the notification ...
Good luck .. I have to go now .. bed time.
Maybe someone else will help you.
Click to expand...
Click to collapse
Buddy, today I found some time and installed adb and fastboot.
After going to fasboot I got to see that my device is s off.
Also ran the getvar all command.
Attached both pics.
Kindly let me know guys , what does my current configuration / status means?
And , what options I have to upgrade to marshmallow?
Here are the pics
lekhwani said:
Here are the pics
Click to expand...
Click to collapse
Your device is m8_ul_ca means it is originally an AT&T or a Developer Edition device.
Now it's running Asia WWE ROM, the CID is SuperCID (which is good) but the MID is EU MID
So .. you have to decide ..what you want your device to be ?
Most important where your location is then make it suitable for your current location.
The easiest is change it to EU WWE ... you don't need to change anything ... only run the EU WWE RUU
ckpv5 said:
Your device is m8_ul_ca means it is originally an AT&T or a Developer Edition device.
Now it's running Asia WWE ROM, the CID is SuperCID (which is good) but the MID is EU MID
So .. you have to decide ..what you want your device to be ?
Most important where your location is then make it suitable for your current location.
The easiest is change it to EU WWE ... you don't need to change anything ... only run the EU WWE RUU
Click to expand...
Click to collapse
Thanks for the quick reply.
I am from India. Is there any method by way of which I can install ota which currently throws the system variant issue after downloading the full 1.14 gb download.
Can this be due to s off?
can I just s on from s off and this will resolve my current issue.
Or its not possible now ?( Because it's modified too far?)
read just a few minutes back in one m8 thread on xda only that with a fastboot command (fastboot own writesecurflag 3) we can convert to s on but everything should be stock for this.
As I mentioned earlier, the system variant error is due to wrong MID on the device, nothing to do with S-Off/S-On status.
You would not have the system variant error if the MID is 0P6B11000 ( read back my post #7 )
To ensure a successful OTA installation ... both software version no. and MID must correct .. same goes for CID but since yours is SuperCID then it is universal for any variant.
Give you a few examples of correct version no. & MID
Asia WWE - x.xx.707.x - MID - 0P6B11000
EU WWE - x.xx.401.x - MID - 0P6B10000
India WWE - x.xx.720.x - MID - 0P6B65000
Your current configuration is wrong, that's why the system variant error.
I suggest to install EU WWE RUU so you save the headache to change this and that.
Read this for the driver part that you need on your PC - http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
Read this for the EU RUU and How-to : http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Or if the above is not possible, I am ready to flash ruu. Then kindly guide me how and what ruu to flash? Will I have to unlock also?
lekhwani said:
read just a few minutes back in one m8 thread on xda only that with a fastboot command (fastboot own writesecurflag 3) we can convert to s on but everything should be stock for this.
Click to expand...
Click to collapse
Don't do this when you have this kind of wrong configuration on your device.
You'll regret your action as you won't be able to do anything not even OTA until you spend another USD25 to S-Off it again and correct the configuration.
---------- Post added at 09:28 PM ---------- Previous post was at 09:26 PM ----------
lekhwani said:
Or if the above is not possible, I am ready to flash ruu. Then kindly guide me how and what ruu to flash? Will I have to unlock also?
Click to expand...
Click to collapse
Read what I posted earlier ... that's all you need to do .. no need to unlock but you can unlock if you want to.
My mied reads 000000.. does this mean eu mied?
Or its just because it's not a cdma device?

"This build is for development purpose only..."

Hi all,
I just successfuly s-offed my HTC10 but on every reboot I have this very annoying red message:
"This build is for development purposes only do not distribute outside of HTC without HTC's permission ..."
Is there's a way to get rid of this?
Thanks!
It's nothing to be worried about.
tkoreaper said:
It's nothing to be worried about.
Click to expand...
Click to collapse
sure I know, but if I plan to sell it one day, it's quite embarrasing...
dd66 said:
sure I know, but if I plan to sell it one day, it's quite embarrasing...
Click to expand...
Click to collapse
In that case it should go away if you revert to stock and switch it back to S-ON or look here, but there is currently nothing you can do if you're on the latest WWE firmware as there hasn't been a custom aboot made for it.
dd66 said:
Hi all,
I just successfuly s-offed my HTC10 but on every reboot I have this very annoying red message:
"This build is for development purposes only do not distribute outside of HTC without HTC's permission ..."
Is there's a way to get rid of this?
Thanks!
Click to expand...
Click to collapse
This stupid, ugly error message is due to a non-stock kernel. As long as you're running a stock kernel, this shouldnt show up (atleast for me). I am currently running Viper10 2.7.0 and it doesnt show that message on startup. Now, if i go and flash elementalx kernel, that message will be displayed. The way to get rid of this is to either download a modified aboot image or modify it yourself via hex editor. There are simple instructions on how to do this for the htc m9, here on XDA. I dont have a link, but a quick search should be able to find it. Another thing you can do is download a modified aboot image from the link in the previous post and download the corresponding stock aboot image of the same version and use a program like "Beyond Compare" to load up both files and do a side by side comparison. It will show you exactly what was modified. Basically it comes down to just erasing the message in a hex editor and reflashing. Please exercise EXTREME CAUTION if choosing to do this. Aboot is a CRITICAL partiton which contains the bootloader. I would imagine if aboot gets flashed improperly or is hex edited incorrectly, the device is toast. Good luck!
Hi All,
I just S_OFFed with LOCKED bootloader my WWE HTC 10, converted to US Unlocked (cid: BS_US001 / mid: 2PS650000) and restored the latest firmware using ruu I downloaded from HTC US website. I also have that red message when I start my phone up. Is it okay when I'm using stock rom without root?
https://forum.xda-developers.com/htc-10/development/bad-sprouts-hidden-red-text-aboots-t3397548
Just read it carefully: high risk of bricking ur phone...
dd66 said:
https://forum.xda-developers.com/htc-10/development/bad-sprouts-hidden-red-text-aboots-t3397548
Just read it carefully: high risk of bricking ur phone...
Click to expand...
Click to collapse
It does not bother me, I'm just curious whether is there US unlocked htc 10 that is not a dev phone? Like on cid BS_US001 I can't disable "Usage and error reporting" because it says " Notwithstanding the above statement, this is a test device and HTC's property. By using this device, you understand and agree...." blablabla. Is there other cid for US Unlocked (what cid US citizens have?) , but not dev/ HTC property one ??
lacxp said:
It does not bother me, I'm just curious whether is there US unlocked htc 10 that is not a dev phone? Like on cid BS_US001 I can't disable "Usage and error reporting" because it says " Notwithstanding the above statement, this is a test device and HTC's property. By using this device, you understand and agree...." blablabla. Is there other cid for US Unlocked (what cid US citizens have?) , but not dev/ HTC property one ??
Click to expand...
Click to collapse
sorry but the highest level of my competencies is reached...I don't know...
Thanks anyway
dd66 said:
Hi all,
I just successfuly s-offed my HTC10 but on every reboot I have this very annoying red message:
"This build is for development purposes only do not distribute outside of HTC without HTC's permission ..."
Is there's a way to get rid of this?
Thanks!
Click to expand...
Click to collapse
Hi dd66,
for WWE - BUILD 2.28.401.9 this works..
CID: HTC__001 ( + HTC__034, HTC__A0, HTC__J15, HTC__M27, HTC__016, HTC__002)
MID: 2PS620000
https://forum.xda-developers.com/showpost.php?p=70428139&postcount=233
Cya
lacxp said:
It does not bother me, I'm just curious whether is there US unlocked htc 10 that is not a dev phone? Like on cid BS_US001 I can't disable "Usage and error reporting" because it says " Notwithstanding the above statement, this is a test device and HTC's property. By using this device, you understand and agree...." blablabla. Is there other cid for US Unlocked (what cid US citizens have?) , but not dev/ HTC property one ??
Click to expand...
Click to collapse
Theres a app in your system called udove.apk. Delete that and that's the forced error reporting.
This happens when i flash custom kernel. Using both stock marshmallow and Nougat
My video even shows it.
matthewacbroad said:
This happens when i flash custom kernel. Using both stock marshmallow and Nougat
My video even shows it.
Click to expand...
Click to collapse
Completely normal behavior.
My HTC was stuck in this screen.. HTC logo, red text and restart over and over again.. any suggestion?
dumitresc said:
My HTC was stuck in this screen.. HTC logo, red text and restart over and over again.. any suggestion?
Click to expand...
Click to collapse
Hi. Did you install SuperSU?
I had the same problem with this boot loop today when I flashed BETA-SuperSU-v2.74-2-forceencrypt. I just reflashed with SR5-SuperSU-v2.82-SR5-20171001224502 following this guide https://forum.xda-developers.com/ht...-off-radio-t3373025/post66714156#post66714156
I hope this helps.
MY HTC DESIRE 10 PRO show that red lines devolopement purposes only etc and it is rebooting again and again and cant open my phone.HELP ME BROS??

Categories

Resources