Guys, I got my m8 about 5 days back. I think it's international Taiwan version. I have attached the images of current software version I am on.
Currently the phone is asking me about 3 very small updates available. I have attached that image also. I don't know what these updates are for.
Shall I update?
Will my phone remain unlocked after these updates?
If after these updates I get prompted for real marshmallow update, shall I update to marshmallow.
Does marshmallow offer much better and some desirable features which we currently don't have?
Btw, I am currently highly satisfied with my current lollipop version.
This thing has really surpassed my expectations. I previously had LG g pro and Xperia z ultra.
Yes, I would definitely update. The phone seems smoother and less laggy on android M. A few new features. Lollipop felt like a beta version of M.
There is really no point to not update.
lekhwani said:
I think it's international Taiwan version.
Click to expand...
Click to collapse
That's not Taiwan version but Asia WWE
ckpv5 said:
That's not Taiwan version but Asia WWE
Click to expand...
Click to collapse
I installed the 3 small updates. Phone prompted me to restart.
So I restarted.
Then I again check software updates and get this prompt:
After hitting the download button, I let it download as it starts downloading some 1.14 gb update. I also put it to charge.
But when after an hour so when I picked up the phone got the message given in second attached picture.
Can someone guide what is the issue?
That means your device is not the original Asia WWE ... I guess you don't bought a new device from authorized HTC dealer.
To know which device that originally is, you need to get the fastboot getvar all result.
Also what's written on the bootloader
ckpv5 said:
That means your device is not the original Asia WWE ... I guess you don't bought a new device from authorized HTC dealer.
To know which device that originally is, you need to get the fastboot getvar all result.
Also what's written on the bootloader
Click to expand...
Click to collapse
It was a new sealed pack I got from eBay. But why it throws up the second message about variant. (I mean when it says mm software update available) ?
It says an update available because the software version no. installed on device is 4.19.707.4 and there is an update to 6.14.707.1
But the second message says it can't install the update because the model-ID in incorrect. It expect model-ID for 4.19.707.4 which is 0P6B11000 but your device may have a different model-ID
That's why we need the fastboot getvar all to determine your original device variant
ckpv5 said:
It says an update available because the software version no. installed on device is 4.19.707.4 and there is an update to 6.14.707.1
But the second message says it can't install the update because the model-ID in incorrect. It expect model-ID for 4.19.707.4 which is 0P6B11000 but your device may have a different model-ID
That's why we need the fastboot getvar all to determine your original device variant
Click to expand...
Click to collapse
But why doesn't it check for the compatible version automatically.
I mean it should say software update is not available for mobile.
It shouldn't prompt in the first place.
The update should automatically check which version or software or hardware I am on.
Btw I have hit the download button again and it's downloading. It's been about 10 minutes and 13% progress.
If this doesn't work this time again, I suppose will have to do getvar thing.
Btw, can the information given on following link solve my problem?
It says don't restart after installing 3 small updates.
But think that guys problem was a bit different
https://www.reddit.com/r/htcone/comments/41809r/marshmallow_update_question/
Those questions only HTC can answer. If I am HTC .. I don't expect the device is modified and I won't check whether the device is modified or not. Most important what is the software version no. because things like model-ID is something in the hardware not the software and users are not supposed to modify hardware.
Sorry ... I don't read outside link ... only XDA for problem reported on XDA.
If you don't feel like to fix it ... just hit don't install, don't check auto checking and block the notification ...
Good luck .. I have to go now .. bed time.
Maybe someone else will help you.
ckpv5 said:
Those questions only HTC can answer. If I am HTC .. I don't expect the device is modified and I won't check whether the device is modified or not. Most important what is the software version no. because things like model-ID is something in the hardware not the software and users are not supposed to modify hardware.
Sorry ... I don't read outside link ... only XDA for problem reported on XDA.
If you don't feel like to fix it ... just hit don't install, don't check auto checking and block the notification ...
Good luck .. I have to go now .. bed time.
Maybe someone else will help you.
Click to expand...
Click to collapse
Thanks for your help so far. Actually its bed here for me as well.
Am already in bed actually.
I have only very occasionly done those fastboot thing.
Suppose will have to do it through laptop tomorrow (when I find time)
Will report here again.
ckpv5 said:
Those questions only HTC can answer. If I am HTC .. I don't expect the device is modified and I won't check whether the device is modified or not. Most important what is the software version no. because things like model-ID is something in the hardware not the software and users are not supposed to modify hardware.
Sorry ... I don't read outside link ... only XDA for problem reported on XDA.
If you don't feel like to fix it ... just hit don't install, don't check auto checking and block the notification ...
Good luck .. I have to go now .. bed time.
Maybe someone else will help you.
Click to expand...
Click to collapse
Buddy, today I found some time and installed adb and fastboot.
After going to fasboot I got to see that my device is s off.
Also ran the getvar all command.
Attached both pics.
Kindly let me know guys , what does my current configuration / status means?
And , what options I have to upgrade to marshmallow?
Here are the pics
lekhwani said:
Here are the pics
Click to expand...
Click to collapse
Your device is m8_ul_ca means it is originally an AT&T or a Developer Edition device.
Now it's running Asia WWE ROM, the CID is SuperCID (which is good) but the MID is EU MID
So .. you have to decide ..what you want your device to be ?
Most important where your location is then make it suitable for your current location.
The easiest is change it to EU WWE ... you don't need to change anything ... only run the EU WWE RUU
ckpv5 said:
Your device is m8_ul_ca means it is originally an AT&T or a Developer Edition device.
Now it's running Asia WWE ROM, the CID is SuperCID (which is good) but the MID is EU MID
So .. you have to decide ..what you want your device to be ?
Most important where your location is then make it suitable for your current location.
The easiest is change it to EU WWE ... you don't need to change anything ... only run the EU WWE RUU
Click to expand...
Click to collapse
Thanks for the quick reply.
I am from India. Is there any method by way of which I can install ota which currently throws the system variant issue after downloading the full 1.14 gb download.
Can this be due to s off?
can I just s on from s off and this will resolve my current issue.
Or its not possible now ?( Because it's modified too far?)
read just a few minutes back in one m8 thread on xda only that with a fastboot command (fastboot own writesecurflag 3) we can convert to s on but everything should be stock for this.
As I mentioned earlier, the system variant error is due to wrong MID on the device, nothing to do with S-Off/S-On status.
You would not have the system variant error if the MID is 0P6B11000 ( read back my post #7 )
To ensure a successful OTA installation ... both software version no. and MID must correct .. same goes for CID but since yours is SuperCID then it is universal for any variant.
Give you a few examples of correct version no. & MID
Asia WWE - x.xx.707.x - MID - 0P6B11000
EU WWE - x.xx.401.x - MID - 0P6B10000
India WWE - x.xx.720.x - MID - 0P6B65000
Your current configuration is wrong, that's why the system variant error.
I suggest to install EU WWE RUU so you save the headache to change this and that.
Read this for the driver part that you need on your PC - http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
Read this for the EU RUU and How-to : http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Or if the above is not possible, I am ready to flash ruu. Then kindly guide me how and what ruu to flash? Will I have to unlock also?
lekhwani said:
read just a few minutes back in one m8 thread on xda only that with a fastboot command (fastboot own writesecurflag 3) we can convert to s on but everything should be stock for this.
Click to expand...
Click to collapse
Don't do this when you have this kind of wrong configuration on your device.
You'll regret your action as you won't be able to do anything not even OTA until you spend another USD25 to S-Off it again and correct the configuration.
---------- Post added at 09:28 PM ---------- Previous post was at 09:26 PM ----------
lekhwani said:
Or if the above is not possible, I am ready to flash ruu. Then kindly guide me how and what ruu to flash? Will I have to unlock also?
Click to expand...
Click to collapse
Read what I posted earlier ... that's all you need to do .. no need to unlock but you can unlock if you want to.
My mied reads 000000.. does this mean eu mied?
Or its just because it's not a cdma device?
Related
Hi Friends ! I have problem with my New M8. the phone is used for 3 weeks and I bougth it. there is update to lolitop but whenI press to install button the phone enters recovery mode (twrp) and thats all. doesnt update even manually I could not it. its unlock and s-on. thanks a lot. sorry my english
dj_muncher said:
Hi Friends ! I have problem with my New M8. the phone is used for 3 weeks and I bougth it. there is update to lolitop but whenI press to install button the phone enters recovery mode (twrp) and thats all. doesnt update even manually I could not it. its unlock and s-on. thanks a lot. sorry my english
Click to expand...
Click to collapse
TWRP is custom recovery. You need stock recovery to install an OTA. Find the right stock recovery for your CID and stock software number here: http://forum.xda-developers.com/showthread.php?t=2701376
redpoint73 said:
TWRP is custom recovery. You need stock recovery to install an OTA. Find the right stock recovery for your CID and stock software number here: http://forum.xda-developers.com/showthread.php?t=2701376
Click to expand...
Click to collapse
thank you got it but how can I learn my cid number ?
dj_muncher said:
thank you got it but how can I learn my cid number ?
Click to expand...
Click to collapse
Seriously....READ that thread mate ! It's all described there.
In this shot taken from the OP of that specific thread ..... I read something and there i also read something as CIDNUM.....you think that command will lead you to your CID ?
Mr Hofs said:
In this shot taken from the OP of that specific thread ..... I read something and there i also read something as CIDNUM.....you think that command will lead you to your CID ?
Click to expand...
Click to collapse
still the same problem. even install stock recovery but it suddenly stopped when updating. and red triangle exclamation point than the phone restarted. so how can I update do you have any idea ?
dj_muncher said:
still the same problem. even install stock recovery but it suddenly stopped when updating. and red triangle exclamation point than the phone restarted. so how can I update do you have any idea ?
Click to expand...
Click to collapse
Yeah your system is not stock. Make backups of what you need in the future and do exactly as the thread tells you in order to return to stock via a new stock backup which is probably available there (or a ruu in some cases)
Mr Hofs said:
Yeah your system is not stock. Make backups of what you need in the future and do exactly as the thread tells you in order to return to stock via a new stock backup which is probably available there (or a ruu in some cases)
Click to expand...
Click to collapse
I dont need any thing so just install a stock rom ?
dj_muncher said:
I dont need any thing so just install a stock rom ?
Click to expand...
Click to collapse
All explained in there, i don't want to sound rude or such but if you study that thread to get to stock you will find all answers
Mr Hofs said:
All explained in there, i don't want to sound rude or such but if you study that thread to get to stock you will find all answers
Click to expand...
Click to collapse
Ok thank you
Mr Hofs said:
All explained in there, i don't want to sound rude or such but if you study that thread to get to stock you will find all answers
Click to expand...
Click to collapse
I am sorry to trouble you but is there any way to get s-off ?
dj_muncher said:
I am sorry to trouble you but is there any way to get s-off ?
Click to expand...
Click to collapse
SunShine for modern Motorola & HTC devices
That's the only way.
BerndM14 said:
SunShine for modern Motorola & HTC devices
That's the only way.
Click to expand...
Click to collapse
thank you !
BerndM14 said:
SunShine for modern Motorola & HTC devices
That's the only way.
Click to expand...
Click to collapse
I have solved the problem and I got the updates thank you very much but I have 4.4.4 and when i check for new updates it says you have the last updates. do you have any idea ?
dj_muncher said:
I have solved the problem and I got the updates thank you very much but I have 4.4.4 and when i check for new updates it says you have the last updates. do you have any idea ?
Click to expand...
Click to collapse
I won't know.... What CID do you have? Mr Hofs asked this previously and I'm yet to see anything from your side. If you're on International WWE then the update is not yet out for your device. If you have Asian WWE then the update *might* be out for your device, either way we won't know. Share some info on what device you have.
In the first post you mentioned you received the OTA for your device... If you don't get it now then try to do a factory reset and see if you can get it afterwards. Though it would still help a lot to know what device you have. So get adb on your PC and in bootloader mode use the command: fastboot getvar all and share the info, just delete the IMEI and Serial number.
BerndM14 said:
I won't know.... What CID do you have? Mr Hofs asked this previously and I'm yet to see anything from your side. If you're on International WWE then the update is not yet out for your device. If you have Asian WWE then the update *might* be out for your device, either way we won't know. Share some info on what device you have.
In the first post you mentioned you received the OTA for your device... If you don't get it now then try to do a factory reset and see if you can get it afterwards. Though it would still help a lot to know what device you have. So get adb on your PC and in bootloader mode use the command: fastboot getvar all and share the info, just delete the IMEI and Serial number.
Click to expand...
Click to collapse
Thank you very much !
My CID is spcs_001 and model is 831C.
software status : Official
relock
M8_WHL PVT SHIP S-ON
HBOOT-3.19.0.0000
There was new updates and i installed it. after this I got 4.4.4 and now there are no updates avaible for your phone.
dj_muncher said:
Thank you very much !
My CID is spcs_001 and model is 831C.
software status : Official
relock
M8_WHL PVT SHIP S-ON
HBOOT-3.19.0.0000
There was new updates and i installed it. after this I got 4.4.4 and now there are no updates avaible for your phone.
Click to expand...
Click to collapse
Sprint device? Didn't think you'd have a Sprint one, thought you were from the Ukraine going by your flag choice etc.
Either way, 4.4.4 is the latest for Sprint devices, the Lollipop update is still in 2(Integration) stage so it has some ways to go still before lollipop.
BerndM14 said:
Sprint device? Didn't think you'd have a Sprint one, thought you were from the Ukraine going by your flag choice etc.
Either way, 4.4.4 is the latest for Sprint devices, the Lollipop update is still in 2(Integration) stage so it has some ways to go still before lollipop.
Click to expand...
Click to collapse
Actually i am from Turkey but I live in Ukraine so my situation - its a little complicated Yes sprint device but what is the difference between the other devices M8 and sprint M8 ? And the seller told me the device from USA.
So my device never will get the lollipop ? Or I have to be patience
dj_muncher said:
Actually i am from Turkey but I live in Ukraine so my situation - its a little complicated Yes sprint device but what is the difference between the other devices M8 and sprint M8 ? And the seller told me the device from USA.
So my device never will get the lollipop ? Or I have to be patience
Click to expand...
Click to collapse
Well it looks like you've been getting OTA updates so far, so you should be able to get it when Lollipop is released, whenever that is.
Sprint - CDMA device (Verizon as well).
Other M8s - GSM Devices.
You can look up the main differences between the two with a quick google search.
It's American device yes. It would perhaps have been better if they had the Developer Edition or Unlocked Edition from the US instead of a carrier specific(Sprint) device which runs on different technologies(Radios) for their networks. Generally you won't be able to us a CDMA device "just anywhere" where as GSM is Global. Like I said though, you can get the whole explanation with a simple Google search though.
yes i have been getting OTA update. Patience or custom rom .
I can wait for it I think .
And i dont know my device is unlocked edition or developer edition but i use my phone normally i put a nano sim and the network works very well.
I have searched it and get the main idea thank your very much
Guys i am desperated and depressed i got this phone htc one m8 yesterday and since yesterday i am on it trying to fix it .
i unlock and root the phone and install skydragon custom rom on it wihout first backing up my custom rom ( so stupid of me ) with youtube video guide .. now the reason i wanna change this and go back to normal is because i cannot get 4g networks running for my mobile data on my device which it is for me annoying and at the same time very important .
So please i will give what information i can so you can guide me and give me the correct rom for my device please i will highly appreciated it
i went to my carrier shop today and took a screenshot of one of there m8 there custom rom info so i guess i need this
kernel version
3 4 0-g6af28ec
[email protected] #1
SMP PREEMPT
Baseband version
1.25.214500021.06G_20.684196t.01_F
build number
4.16.401.10 CL448934 release-keys
Please help me find this rom
thank you
First .. we need to know your device current hboot, CID, MID & etc.
Put your device in bootloader mode and connect to PC and open a command prompt from where you have your fastboot/adb files. then run this command in the command prompt
fastboot getvar all
copy the result and post here but delete the IMEI no & Serial no.
If you don't have fastboot/adb installed, read this : http://forum.xda-developers.com/showthread.php?t=2317790
ckpv5 said:
First .. we need to know your device current hboot, CID, MID & etc.
Put your device in bootloader mode and connect to PC and open a command prompt from where you have your fastboot/adb files. then run this command in the command prompt
fastboot getvar all
copy the result and post here but delete the IMEI no & Serial no.
If you don't have fastboot/adb installed, read this : http://forum.xda-developers.com/showthread.php?t=2317790
Click to expand...
Click to collapse
here is what you asked thank you for you assistance
what is the next step please
Hmmm... m8_ul_ca ... means it's not a HKG device and not a EU device
If I'm not wrong m8_ul_ca is either AT&T or Developer Edition device. (m8_ul_ca I believe is a US device)
but previously S-Offed to change the MID to EU and SuperCID.
And that's explain your 4G problem in your country, most probably is the radio band version which I'm not familiar with.
@redpoint73 - can you help on this radio matter as you are more expert on this
You can try either using EU 4.16.401.10 RUU.exe - http://forum.xda-developers.com/showpost.php?p=56140330&postcount=1
you need to relock bootloader and make backup of your internal storage important data as this will wipe everything
Or you install latest TWRP and restore 4.16.401.10 backup (no need to relock bootloader)
then check whether your 4G is working or not.
ckpv5 said:
Hmmm... m8_ul_ca ... means it's not a HKG device and not a EU device
If I'm not wrong m8_ul_ca is either AT&T or Developer Edition device. (m8_ul_ca I believe is a US device)
but previously S-Offed to change the MID to EU and SuperCID.
And that's explain your 4G problem in your country, most probably is the radio band version which I'm not familiar with.
@redpoint73 - can you help on this radio matter as you are more expert on this
You can try either using EU 4.16.401.10 RUU.exe - http://forum.xda-developers.com/showpost.php?p=56140330&postcount=1
you need to relock bootloader and make backup of your internal storage important data as this will wipe everything
Or you install latest TWRP and restore 4.16.401.10 backup (no need to relock bootloader)
then check whether your 4G is working or not.
Click to expand...
Click to collapse
hey mate here what i found after a quick search on google and of caurse with your help and inspiration
http://droider.eu/2014/09/20/htc-one-m8-models/http://http://droider.eu/2014/09/20/htc-one-m8-models/
ckpv5 said:
Hmmm... m8_ul_ca ... means it's not a HKG device and not a EU device
If I'm not wrong m8_ul_ca is either AT&T or Developer Edition device. (m8_ul_ca I believe is a US device)
but previously S-Offed to change the MID to EU and SuperCID.
And that's explain your 4G problem in your country, most probably is the radio band version which I'm not familiar with.
@redpoint73 - can you help on this radio matter as you are more expert on this
You can try either using EU 4.16.401.10 RUU.exe - http://forum.xda-developers.com/showpost.php?p=56140330&postcount=1
you need to relock bootloader and make backup of your internal storage important data as this will wipe everything
Or you install latest TWRP and restore 4.16.401.10 backup (no need to relock bootloader)
then check whether your 4G is working or not.
Click to expand...
Click to collapse
so what we do with it now . how do install the latest twrp on my device i would like to try your second suggestion for my problem . when you mention to restore the 4.16.401.10 backup how do i do that ? sorry if i fur stated you .
at the end of this "toleration" if there is a way to say thank you and show my respect please let me know
italianveins said:
so what we do with it now . how do install the latest twrp on my device i would like to try your second suggestion for my problem . when you mention to restore the 4.16.401.10 backup how do i do that ? sorry if i fur stated you .
at the end of this "toleration" if there is a way to say thank you and show my respect please let me know
Click to expand...
Click to collapse
The how-to is in my thread that you posted before .. linked in my signature
my model on the back phone it is written like 0P6B110 so according to the website is australia if i am correct
italianveins said:
my model on the back phone it is written like 0P6B110 so according to the website is australia if i am correct
Click to expand...
Click to collapse
Not all Australia device has 0P6B110, Optus is 0P6B650
and mine an Asian one has 0P6B110 too. Eventhough that website say Taiwan has 0P6B150 but that is for m8_ul_tw because the regular Taiwan m8_ul is 0P6B110
So don't worry so much on this what written on the back because it's getting weird for a m8_ul_ca to have 0P6B110 instead of 0P6B120
ckpv5 said:
Not all Australia device has 0P6B110, Optus is 0P6B650
and mine an Asian one has 0P6B110 too. Eventhough that website say Taiwan has 0P6B150 but that is for m8_ul_tw because the regular Taiwan m8_ul is 0P6B110
So don't worry so much on this what written on the back because it's getting weird for a m8_ul_ca to have 0P6B110 instead of 0P6B120
Click to expand...
Click to collapse
i forgot to mention that the phone i bought it from ebay and it came from hong kong ... is that make any sense ?
is this any good ?
http://forum.xda-developers.com/showthread.php?t=2705292
With your current hboot, you should be able to run any lollipop ROM. You can give that ROM a try .. maybe some configuration in that ROM will help your radio (4G) problem.
ckpv5 said:
With your current hboot, you should be able to run any lollipop ROM. You can give that ROM a try .. maybe some configuration in that ROM will help your radio (4G) problem.
Click to expand...
Click to collapse
which one please can you link it here so i can download it and flash it and see if it's going to work ? thank you
ckpv5 said:
@redpoint73 - can you help on this radio matter as you are more expert on this
Click to expand...
Click to collapse
Coming from someone of your knowledge, I consider that quite a complement!
Ironically, the radio number is neither for AT&T or Dev Edition. But actually matches what is listed for the Euro RUU you linked:
ckpv5 said:
You can try either using EU 4.16.401.10 RUU.exe - http://forum.xda-developers.com/showpost.php?p=56140330&postcount=1
you need to relock bootloader and make backup of your internal storage important data as this will wipe everything
Click to expand...
Click to collapse
To the OP, what country are you in?
Who is your carrier, and do you know what LTE bands they use?
You asked about a ROM then you ask me to link a ROM ...
that's something that I cannot do because I don't use any of those custom ROMs as I'm on my own made ROM (including SkyDragon is part of my ROM).
I believe all ROMs are good. You just need to try all of them and see which is best suit you. SkyDragon you have 4G problem.. then try MaximusHD, LeeDroid, Viper, InsertCoin & etc.
Maybe try MaximusHD first as this is close to stock custom ROM so less modding/tweaking for you to handle.
You need to see whether 4G is working on this ROM then later try other ROM too ... that's all
ckpv5 said:
it's getting weird for a m8_ul_ca to have 0P6B110 instead of 0P6B120
Click to expand...
Click to collapse
I agree, its really strange the product ID (m8_ul_ca is for AT&T) does not match the MID (0P6B110) on back of the phone.
The phone was also likely s-off previously, as the CID was clearly changed (to SuperCID) and the MID listed in the getvar output is 0P6B100 (also probably changed by the previous owner).
redpoint73 said:
I agree, its really strange the product ID (m8_ul_ca is for AT&T) does not match the MID (0P6B110) on back of the phone.
The phone was also likely s-off previously, as the CID was clearly changed (to SuperCID) and the MID listed in the getvar output is 0P6B100 (also probably changed by the previous owner).
Click to expand...
Click to collapse
Yeah .. believe that's the case .. and I guess on the back of the phone it is written as M8x as 0P6B110 usually for M8x.
But product ID is m8_ul_ca suggests the back cover is most probably just a replacement cover.
ckpv5 said:
But product ID is m8_ul_ca suggests the back cover is most probably just a replacement cover.
Click to expand...
Click to collapse
Ah yes, a replacement cover, what makes much more sense now!
So its most likely an AT&T variant, with replacement back cover, that was previously s-off, changed to Euro MID, SuperCID, and Euro firmware flashed (maybe all Euro software before the OP started modding it).
I recommend again that the OP verify that his carrier is using bands that are supported by the Euro version (at least tell us what country, carrier, and what LTE bands that carrier uses, if known). My guess is "no" and in which case, OP will probably need to s-off and flash the proper radio that supports the required LTE bands.
redpoint73 said:
..... OP will probably need to s-off and flash the proper radio that supports the required LTE bands.
Click to expand...
Click to collapse
I always wonder if a device was S-Offed with SunShine by the previous owner, then the new owner use SunShine to S-Off again, I think the SunShine apk will run and will not request for payment.
What I know SunShine should work on the same device multiple times provided the motherboard is not changed.
Something for OP to try.
redpoint73 said:
Coming from someone of your knowledge, I consider that quite a complement!
Ironically, the radio number is neither for AT&T or Dev Edition. But actually matches what is listed for the Euro RUU you linked:
To the OP, what country are you in?
Who is your carrier, and do you know what LTE bands they use?
Click to expand...
Click to collapse
hello mate thank you for you time taken to help and reply on this . they do support here LTE ( 4G) and my carrier is MTN and i i live in cyprus . i think the band they use is 1900?? not too sure as i am not much into that
but i am under depression really i am willing to pay someone to get me the original custom rom for my phone and be out of this awful stress ;(
ok its not my phone its my friend's one
he is at&t one
s-off
unlocked bootloader
super cid
mid → European one from that thread
and the firmware is from vomar guides - 4.16.401.10 no red text
then install skydragon v1.6.5
no services and cant place calls
any help plz what i can do ?
What was your version number before flashing the Euro firmware?
If you want Euro firmware, its probably best to run the 401 RUU (and "fully convert" to Euro), instead of trying to run AT&T software with Euro firmware.
redpoint73 said:
What was your version number before flashing the Euro firmware?
If you want Euro firmware, its probably best to run the 401 RUU (and "fully convert" to Euro), instead of trying to run AT&T software with Euro firmware.
Click to expand...
Click to collapse
i dont remember the version
but can i flash the euro ruu and restore the phone to default and get ota updates in at&t one ?
cuz my phoen is super cid and euro mid ?
sorry for my english
mohamed7egazy said:
i dont remember the version
Click to expand...
Click to collapse
You should know this. Its important to know the current firmware version, before flashing a new one. Note these important facts in the future.
mohamed7egazy said:
but can i flash the euro ruu and restore the phone to default and get ota updates in at&t one ?
cuz my phoen is super cid and euro mid ?
Click to expand...
Click to collapse
After RUU, the phone will be fully converted to a Euro M8, including the ability to receive and install Euro OTA updates.
redpoint73 said:
You should know this. Its important to know the current firmware version, before flashing a new one. Note these important facts in the future.
After RUU, the phone will be fully converted to a Euro M8, including the ability to receive and install Euro OTA updates.
Click to expand...
Click to collapse
when i flash the ruu from sdcard its say failed and the phone died any help plz
mohamed7egazy said:
when i flash the ruu from sdcard its say failed and the phone died any help plz
Click to expand...
Click to collapse
You need to provide more info.
What RUU and where did you get it from?
What was the failure message in detail? Did any of the partitions install (if so, which ones? and on what partition did it fail?)? Or did it abort before any installation?
What does "phone died" mean? Did it go dark right after you tried to RUU? Did it simply run out of battery? Did you try charging it? Does the screen come on at all if you hold the power button for 30 seconds or more?
ruu from that site
https://xq55.ws/?p=34210
* its arabic blog
i cant remember the msg of fail - that was yesterday
phone died is no system but suddenly i find the system works *skydragon v1.6.5
i flashed the recovery again cuz the recovery is gone * twrp 2.8.7.0
and the firmware i flash * Firmware M8-SD 4.16.401.10 Modified WWE
no services !
and flash the Firmware M8-SD 4.16.401.10 Modified AT&T
no services too :/
cid is still super cid 11111111
mid is europe one 0P6B10000
mohamed7egazy said:
ruu from that site
https://xq55.ws/?p=34210
* its arabic blog
i cant remember the msg of fail - that was yesterday
Click to expand...
Click to collapse
I have no way of helping you with this, if you can't remember the reason it failed.
The link refers back to XDA, so it may be okay, but I really have no way of knowing if it really is or not.
The same RUU from reputable source is posted here: http://forum.xda-developers.com/showthread.php?t=2701376
Try running the RUU again, and note or do a screenshot of the error message(s).
mohamed7egazy said:
phone died is no system but suddenly i find the system works *skydragon v1.6.5
Click to expand...
Click to collapse
Again, that doesn't really tell me what happened. No system means you were stuck on the HTC logo screen? Able to go into bootloader? No recovery at all, or back to stock recovery (red triangle with exclamation).
mohamed7egazy said:
and flash the Firmware M8-SD 4.16.401.10 Modified AT&T
Click to expand...
Click to collapse
That is not the right version number for the AT&T version. Please clarify or correct it.
What you have now is a weird mix of hacked firmwares, custom ROM, etc.
So again, I think its best to do the official RUU to WWE (Euro) 401 "clean" fully stock baseline including all stock firmware, ROM, etc. Then see if that improves your signal problem, or troubleshoot from there.
ok i will install the ruu again
is that one is good ?
https://www.androidfilehost.com/?fid=24052804347796513
and thanx alot
mohamed7egazy said:
ok i will install the ruu again
is that one is good ?
https://www.androidfilehost.com/?fid=24052804347796513
Click to expand...
Click to collapse
That isn't an RUU.
You need to get the link for the section labelled RUU.
oh ok
that ?
https://www.androidfilehost.com/?fid=24052804347796512
mohamed7egazy said:
oh ok
that ?
https://www.androidfilehost.com/?fid=24052804347796512
Click to expand...
Click to collapse
Yes. Assuming you are using the SD card method to RUU.
ok thanks man
i sorry to take ur time i will install it and if i faced any proplem i will talk to u
mohamed7egazy said:
i sorry to take ur time
Click to expand...
Click to collapse
No worries, we're here to help; and I enjoy doing so.
Just be sure to give as much detail as possible when asking for help. It makes it much easier for us to help you.
man that i got after i install the ruu !
can u help me plz ?
Hello,
I brought the phone this February and its working fine. It is running on Kitkat-4.4.2. Then when I searched for software update it shows an update available: 1.54.709.12 (233 MB). But when I download it and try to install, it says "We have determined that your phone may be running a modified version of its system software. For your protection, we cannot update your phone. Please revert your phone to the official HTC system software to update your phone. If you did not modify your system software or would like help reverting your system, please contact us via the support section at www . htc . com"
I saw the bootloader and its locked and cheked if its rooted using rootchecker and its not.
I would prefer not to root my mobile.
I want to update to marshmallow and I am unable to do it
Following are some details:
Current SW:
Android Ver# 4.4.2 (Sense 6)
SW no. 1.54.709.4
HTC SDK API level: 6.17
Baseband version: 1.15.2133156.UA14G_20.18n.4096.05L
Build no. 1.54.709.4 CL325784 release-keys
Bootloader:
***Locked***
M8_UL PVT SHIP S-OFF
CID-11111111
HBOOT-3.16.0.0000
RADIO-1.15.2133156.UA14G
OpenDSP-v38.2.2-00542-M8974.0311
OS-1.54.709.4
eMMC-boot 2048MB
Mar 21 2014,23:56:47.3
Please help.......and thank you in advance.
That's usually means the MID is wrong for the software region that you have.
As yours is a S-Off device, I would say it is easy to fix it.
First thing .. we need to know what the MID is. Run this command - fastboot getvar mid
If you need the driver & tools for this - http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
ckpv5 said:
That's usually means the MID is wrong for the software region that you have.
As yours is a S-Off device, I would say it is easy to fix it.
First thing .. we need to know what the MID is. Run this command - fastboot getvar mid
If you need the driver & tools for this - http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
Click to expand...
Click to collapse
Thank you very much for such quick reply.
I ran the command and it gave me
mid: 0P6B10000
I am from India and I want to get OTA updates in future.
Your MID is a EU MID
You can change it to India MID if you want to but it's a bit complicated for you I guess as it will involve change of MID, you may need to unlock bootloader & etc but it's not difficult.
Anyway .. for a start, make it totally EU version by flashing a Marshmallow EU RUU .. you don't need to unlock bootloader and you don't need to change MID. You will still can receive OTA if there is one but I think there will be no more OTA updates as M8 is already on its EOL (means no more HTC further support)
What you need to do :
option 1 : http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
option 2 : http://forum.xda-developers.com/showpost.php?p=66271711&postcount=4
either one should be fine for your device.
ckpv5 said:
Your MID is a EU MID
You can change it to India MID if you want to but it's a bit complicated for you I guess as it will involve change of MID, you may need to unlock bootloader & etc but it's not difficult.
Anyway .. for a start, make it totally EU version by flashing a Marshmallow EU RUU .. you don't need to unlock bootloader and you don't need to change MID. You will still can receive OTA if there is one but I think there will be no more OTA updates as M8 is already on its EOL (means no more HTC further support)
What you need to do :
option 1 : http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
option 2 : http://forum.xda-developers.com/showpost.php?p=66271711&postcount=4
either one should be fine for your device.
Click to expand...
Click to collapse
Thanks.....I am downloading the RUU zip and let you know what happens next.
By the way, will I have any issues networks or wifi or any other thing as it EU rom and I am in India
i have a question about updating bootloader 3.16 to 3.19 ? i keep trying to inatall cm13.0-20160408 but it keeps telling my it needs a higher bootloader where to find / install/flash
manasdb said:
By the way, will I have any issues networks or wifi or any other thing as it EU rom and I am in India
Click to expand...
Click to collapse
I don't think there will be issue as we notice most custom ROMs are based on EU ROM and many users from India are using them.
ckpv5 said:
I don't think there will be issue as we notice most custom ROMs are based on EU ROM and many users from India are using them.
Click to expand...
Click to collapse
Thanks.....I followed the procedure and installed it and its working fine.:good:
somungho said:
i have a question about updating bootloader 3.16 to 3.19 ? i keep trying to inatall cm13.0-20160408 but it keeps telling my it needs a higher bootloader where to find / install/flash
Click to expand...
Click to collapse
I'd recommend updating all the firmware (which in addition to hboot also includes radio, WiFi, Bluetooth, and a lot of other important modules) not just hboot. Being on hboot 3.16 means all your firmware is outdated, as in 2 years old. Updating to current firmware is best for compatibility with current ROMs.
You can either update by RUU (as discussed above) if available for your version. Or return to stock ROM and recovery, and update OTA (which will update the firmware). But we'd need to know more specifics about your device, to give more detailed direction. Do fastboot getvar all, and post the results (delete IMEI and serial number before posting).
I have the same problem with my htc m9. I cannot do these processes as I am not a professional and don't have a computer .I have a doubt ,If it is the problem with region ,Why can't we simply changes the region by turbo VPN and try to update the Android version
mpAsifMP said:
I have the same problem with my htc m9. I cannot do these processes as I am not a professional and don't have a computer .I have a doubt ,If it is the problem with region ,Why can't we simply changes the region by turbo VPN and try to update the Android version
Click to expand...
Click to collapse
You can't do that, since for HTC devices the region has little or nothing to do with spoofing where your phone is located (with VPN, etc.). The model ID (MID) and carrier ID (CID) are encoded into the phone. You typically can't change this on HTC devices, unless you have s-off. But further advice would be specific to the M9, and you should either search or post the M9 device forum. Following advice for a different device (this is for M8) is dangerous and can damage your phone!
Hi guys,
I hope you can help me solve my issue. I spend the entire evening try to do it, reading through the post on this forum but I couldn't figure out a solution.
So basically I bought an HTC 10 unlocked in Ireland, and I currently have Android 7 , no mods or anything on it.
I know there was an OTA update available, but every time I check for software updates I get the error Can't update software. There was an unexpected error and the file system may be corrupted.
I tried then to do a manual update. I download the file (ruu I think) from HTC website and I rebooted the device in download mode and tryed to install. I got error 130
to perform a manual update via PC but it didn't work, I received a model ID error (Model ID error)
I did a factory reset and tried OTA again with no luck.
I am looking for some pratical advice, Any help would be much appreciated!
Thanks,
Vincent
VincentHTC10 said:
Hi guys,
I hope you can help me solve my issue. I spend the entire evening try to do it, reading through the post on this forum but I couldn't figure out a solution.
So basically I bought an HTC 10 unlocked in Ireland, and I currently have Android 7 , no mods or anything on it.
I know there was an OTA update available, but every time I check for software updates I get the error Can't update software. There was an unexpected error and the file system may be corrupted.
I tried then to do a manual update. I download the file (ruu I think) from HTC website and I rebooted the device in download mode and tryed to install. I got error 130
to perform a manual update via PC but it didn't work, I received a model ID error (Model ID error)
I did a factory reset and tried OTA again with no luck.
I am looking for some pratical advice, Any help would be much appreciated!
Thanks,
Vincent
Click to expand...
Click to collapse
Boot to download mode, read the OS line and look for the matching ruu.zip.
Mr Hofs said:
Boot to download mode, read the OS line and look for the matching ruu.zip.
Click to expand...
Click to collapse
Hi Mr Hofs ,
OS-2.41.771.3
I should find an RUU with the same line and try the procedure again?
Yes one with the same line or a higher one, or a matching stock backup.
When you succeed to upgrade and tinker again with the device it's wise to create a pure stock backup for the future.
VincentHTC10 said:
Hi Mr Hofs ,
OS-2.41.771.3
I should find an RUU with the same line and try the procedure again?
Click to expand...
Click to collapse
Mr Hofs said:
Yes one with the same line or a higher one, or a matching stock backup.
When you succeed to upgrade and tinker again with the device it's wise to create a pure stock backup for the future.
Click to expand...
Click to collapse
Mr Hofs,
thanks for your help.
I have found this 2PS6IMG PERFUME UHL N70 SENSE80GP MR Telstra WWE 2.48.841.3 Radio [email protected] 80.07 F release 505754 partial
and it's only 105MB
Do you think this one could work?
Thanks for your help, I am not very familiar with this kind of things.
Vincent
VincentHTC10 said:
Mr Hofs,
thanks for your help.
I have found this 2PS6IMG PERFUME UHL N70 SENSE80GP MR Telstra WWE 2.48.841.3 Radio [email protected] 80.07 F release 505754 partial
and it's only 105MB
Do you think this one could work?
Thanks for your help, I am not very familiar with this kind of things.
Vincent
Click to expand...
Click to collapse
As been explained you need one with your OS number. Not some random firmware. 2.48.841 doesn't come near 2.41.771 .......
also a full ruu is at least 1.8 gig
Edit :
Especially the. 771 part has to match. The first 2.41 should match or be higher.
Mr Hofs said:
As been explained you need one with your OS number. Not some random firmware. 2.148.841 doesn't come near 2.41.771 .......
also a full ruu is at least 1.8 gig
Edit :
Especially the. 771 part has to match. The first 2.41 should match or be higher.
Click to expand...
Click to collapse
I thought it was 2.48 hence higher, didn't see the 1
The closer I could find online is 2.41.041.4 which is lower than the one that I have so I guess is not good.
Is there other way to do it ? a work around?
My phone is running at the moment I don't know why some files got corrupted.
VincentHTC10 said:
I thought it was 2.48 hence higher, didn't see the 1
The closer I could find online is 2.41.041.4 which is lower than the one that I have so I guess is not good.
Is there other way to do it ? a work around?
My phone is running at the moment I don't know why some files got corrupted.
SN:
IMEI
Click to expand...
Click to collapse
DELETE your imei and SN ASAP. that's never ment to be on an online platform!
Second option is to pay for S-OFF via sunshine and convert the device to wwe which has all RUU files available.
And as i explained allready and will do that again, your 771 part has to MATCH so it can't be 041 or 401 or 841 it MUST be. 771. So either 2.41.771 or 3.16.771 or 3.18.771 (as examples)
Mr Hofs said:
DELETE your imei and SN ASAP. that's never ment to be on an online platform!
Second option is to pay for S-OFF via sunshine and convert the device to wwe which has all RUU files available.
And as i explained allready and will do that again, your 771 part has to MATCH so it can't be 041 or 401 or 841 it MUST be. 771. So either 2.41.771 or 3.16.771 or 3.18.771 (as examples)
Click to expand...
Click to collapse
Thanks for your clarifications, Mr Hofs.
Yesterday evening I was able to find and buy this firmware 2PS6IMG_PERFUME_UHL_O80_SENSE90GP_MR_H3G_UK_3.18.771.1[email protected]_84.09_F_release_519646_signed.zip
that according to your explanation should be a good fit.
I downloaded the file on my pc and then I followed a guide to try and install it using "adb and fastboot" but when I gave the comand to run it and I received an error that the file was too big and the adb crashed as well, so I wasn't able to try to install it on the phone. I saw there are many different guides online. Do you know if there s a good one that works ?
Thanks for your help!
Vincent
VincentHTC10 said:
Thanks for your clarifications, Mr Hofs.
Yesterday evening I was able to find and buy this firmware 2PS6IMG_PERFUME_UHL_O80_SENSE90GP_MR_H3G_UK_3.18.[email protected]_84.09_F_release_519646_signed.zip
that according to your explanation should be a good fit.
I downloaded the file on my pc and then I followed a guide to try and install it using "adb and fastboot" but when I gave the comand to run it and I received an error that the file was too big and the adb crashed as well, so I wasn't able to try to install it on the phone. I saw there are many different guides online. Do you know if there s a good one that works ?
Thanks for your help!
Vincent
Click to expand...
Click to collapse
Yep should be great. You have to rename the ruu.zip to 2PS6IMG.zip only and copy it to your SDcard. Boot to download mode and follow the flash instructions. The file will be auto detected. Be aware that this will wipe the ENTIRE phone.
Edit :
You said "buy" ? Now i am wondering where you bought it and how much you payed for it ?
Mr Hofs said:
Yep should be great. You have to rename the ruu.zip to 2PS6IMG.zip only and copy it to your SDcard. Boot to download mode and follow the flash instructions. The file will be auto detected. Be aware that this will wipe the ENTIRE phone.
Edit :
You said "buy" ? Now i am wondering where you bought it and how much you payed for it ?
Click to expand...
Click to collapse
yes, I bought it for 3$ on firmware.gem-flash.com They have plenty of firmware there was also the 2.41.771.3 version.
I thought better pay 3$ than 25$ to buy the license for sunshine.
..Let`s see if it works now, finger crossed
VincentHTC10 said:
yes, I bought it for 3$ on firmware.gem-flash.com They have plenty of firmware there was also the 2.41.771.3 version.
I thought better pay 3$ than 25$ to buy the license for sunshine.
..Let`s see if it works now, finger crossed
Click to expand...
Click to collapse
I get few errors as well here
End ui_updating, press power key to continue
it says
12 RU_ZIP_ERROR
12 RU_ZIP_ERROR
FAIL12 RU_ZIP_ERROR
press power to continue (it shuts the phone )
when I restart everything as usual.
Do you think I should try with the original firmware? ( I can have it with another 3$ )
VincentHTC10 said:
I get few errors as well here
End ui_updating, press power key to continue
it says
12 RU_ZIP_ERROR
12 RU_ZIP_ERROR
FAIL12 RU_ZIP_ERROR
press power to continue (it shuts the phone )
when I restart everything as usual.
Do you think I should try with the original firmware? ( I can have it with another 3$ )
Click to expand...
Click to collapse
Dude - stop wasting your money on that website. All the files are available here @ XDA (nearly all!) for free via links already posted or by asking.
The RU_FAILED is because the file you got doesnt match the CID of your phone. The CID is basically the Network Lock on the phone - dont get confused with Sim Lock.
Go on Google Playstore and install; Simple CID Getter. Let us know here what it says. e.g; HTC_001 (Mines H3G_001 which is 3 UK Network)
Then we can get you further along.....
alchemist83 said:
Dude - stop wasting your money on that website. All the files are available here @ XDA (nearly all!) for free via links already posted or by asking.
The RU_FAILED is because the file you got doesnt match the CID of your phone. The CID is basically the Network Lock on the phone - dont get confused with Sim Lock.
Go on Google Playstore and install; Simple CID Getter. Let us know here what it says. e.g; HTC_001 (Mines H3G_001 which is EE Network)
Then we can get you further along.....
Click to expand...
Click to collapse
alchemist83 thanks for your suggestions. Here is my CID: H3G__003 ( 3 network)
Waiting for instruction :angel:
VincentHTC10 said:
alchemist83 thanks for your suggestions. Here is my CID: H3G__003 ( 3 network)
Waiting for instruction :angel:
Click to expand...
Click to collapse
So thats your pain in the arse (3 network! Me too - UK!)
Currently there does NOT seem to be any RUU for our networks.
Only way forward for both of us it would seem is to S-Off via Sunshine.
If you have already - then sweet, you can change your CID to 11111111 which will mean you can flash that zip you got and it will work.
Search or ask here on XDA about changiing CID to 11111111. Plenty have done before, so shouldnt be too hard for you.
I havent done it since HTC M7 so I cant remember, need to look it up myself.
Hope that helps!
alchemist83 said:
So thats your pain in the arse (3 network! Me too - UK!)
Currently there does NOT seem to be any RUU for our networks.
Only way forward for both of us it would seem is to S-Off via Sunshine.
If you have already - then sweet, you can change your CID to 11111111 which will mean you can flash that zip you got and it will work.
Search or ask here on XDA about changiing CID to 11111111. Plenty have done before, so shouldnt be too hard for you.
I havent done it since HTC M7 so I cant remember, need to look it up myself.
Hope that helps!
Click to expand...
Click to collapse
ahahah good to know!
So I understand what you say.. but what if I pay 3$ and download the exact firmware that I have at the moment 2PS6IMG_PERFUME_UHL_N70_SENSE80GP_MR_H3G_UK_2.41.771.31_[email protected]_79.07_F_release_509479_combined_signed.zip
After that (once the file system is no longer corrupted) I could try to do an OTA update
It would be too easy so maybe the problem is that I can`t be sure that firmware is for 3 network right?
VincentHTC10 said:
ahahah good to know!
So I understand what you say.. but what if I pay 3$ and download the exact firmware that I have at the moment 2PS6IMG_PERFUME_UHL_N70_SENSE80GP_MR_H3G_UK_2.41.771.31_[email protected]_79.07_F_release_509479_combined_signed.zip
After that (once the file system is no longer corrupted) I could try to do an OTA update
It would be too easy so maybe the problem is that I can`t be sure that firmware is for 3 network right?
Click to expand...
Click to collapse
Thats actually prob the 1 I need (if you have the file name BTW - search it in Google, for sure you might get lucky on a Download and NOT have to pay, might even find it on here XDA, theres a very good chance of that.)
For you however the need the file thats says H3G_ROI cos your CID is that. H3G__003 = H3G_ROI (Republic Of Ireland).
Mine is H3G__001 = H3G_UK. Soz bud dont think will work. You try, it will only fail or do it. It wont bust it if it does do it. S-OFF is calling you doh.... $25 about 18 pound UK.
---------- Post added at 11:39 PM ---------- Previous post was at 11:18 PM ----------
So if you do S-OFF and wanna go full OREO and have go Super CID 1111111.. whatever it is, then heres a link for WWE (Europe) RUU OREO zip for you HERE.
Rename it as you did before to 2PS6IMG etc - you've done it before lols. Best of luck
If the version number matches it's great to use. There is no RUU with 3.18.771 created for 2 different CID sets specifically. So that's not the problem. Either take the 2.41.771 (full ruu). Not only the firmware because if your OS is screwed you will be in the same boat again I remember they pulled the US ruu and they had to update the standalone firmware prior to using to the full ruu. You could check out to take the firmware from the ruu and flash it prior to the ruu.
That's done via download mode, htc ruu mode and Fastboot commands
VincentHTC10 said:
I get few errors as well here
End ui_updating, press power key to continue
it says
12 RU_ZIP_ERROR
12 RU_ZIP_ERROR
FAIL12 RU_ZIP_ERROR
press power to continue (it shuts the phone )
when I restart everything as usual.
Do you think I should try with the original firmware? ( I can have it with another 3$ )
Click to expand...
Click to collapse
---------- Post added at 04:04 AM ---------- Previous post was at 03:54 AM ----------
alchemist83 said:
Thats actually prob the 1 I need (if you have the file name BTW - search it in Google, for sure you might get lucky on a Download and NOT have to pay, might even find it on here XDA, theres a very good chance of that.)
For you however the need the file thats says H3G_ROI cos your CID is that. H3G__003 = H3G_ROI (Republic Of Ireland).
Mine is H3G__001 = H3G_UK. Soz bud dont think will work. You try, it will only fail or do it. It wont bust it if it does do it. S-OFF is calling you doh.... $25 about 18 pound UK.
---------- Post added at 11:39 PM ---------- Previous post was at 11:18 PM ----------
So if you do S-OFF and wanna go full OREO and have go Super CID 1111111.. whatever it is, then heres a link for WWE (Europe) RUU OREO zip for you HERE.
Rename it as you did before to 2PS6IMG etc - you've done it before lols. Best of luck
Click to expand...
Click to collapse
If you look at your and his original OS/firmware number the RUU should work. It's definitely not CID related at this point. They don't create 2 ruu files with the same firmware number for 2 or even more CID numbers, if you check a ruu and open the host file you will see more than 1 CID in there.
He has a matching ruu but i think it has the same issue as the US version has.
He took his OS line from the download mode, that number can't change without s-off so that's the thing you'd have to look at. It's not suddenly changing because of the CID.
Also if he had to look at h3g ROI his version number would have been different, in that case it should be 2.41.773 and not 771....... there is no H3G ROI for the HTC 10, it's integrated in the UK version range.
And also i googled some on this ruu, not easy to track or dead links or spam. So i can understand his call to buy it for 3.
If he wants to pay another 3 for the 2.41.771 than its his call. It's a big difference to 25. I can't look inside his wallet. However i share your feeling that sunshine would a more valuable investment.
Fair point Mr Hofs, I dont know enough really to be able to help fully. I need the same help to update my phone. I looked at the same place these RUU are available for $3 and they have alot more than has been listed (example; OREO update for 3 UK). I am considering downloading myself (and sharing for all!). I want to make sure I get the correct version - but I'm having trouble finding my version numbers so I get the right one. I've perhaps made it harder but using the Venom custom Rom. I've looked in about but cant find anything that makes sense. Can you advise where I can find the version numbers? Cheers
alchemist83 said:
Fair point Mr Hofs, I dont know enough really to be able to help fully. I need the same help to update my phone. I looked at the same place these RUU are available for $3 and they have alot more than has been listed (example; OREO update for 3 UK). I am considering downloading myself (and sharing for all!). I want to make sure I get the correct version - but I'm having trouble finding my version numbers so I get the right one. I've perhaps made it harder but using the Venom custom Rom. I've looked in about but cant find anything that makes sense. Can you advise where I can find the version numbers? Cheers
Click to expand...
Click to collapse
Man if your OS number is the same as mine I can share with you the file I downloaded and see if it can be useful for you at least.
I think I am gonna try to download the same version that I have at the moment as It seems an easier way than use sunshine to S-OFF and go down that way.
I ll keep you posted. Cheers