Related
I have to admit that it was by mistake (actually I was looking to get rid of the t-mobile phone skin) that I stumbled over a nice way to get 10MB more program memory out of the MDA Pro:
HKEY_LOCAL_MACHINE\Security\Phone\Skin
"Enabled"
Change from "1" to "0"
as a result of that, you cannot make videocalls anymore, but you can change this setting back within 2 minutes...(resco reg editor brings up the latest entry at startup so its right there, and then warm reset) and the ugly t-mobile skin is gone and replaced by the original nice blue windows skin.
I also squeezed 3 MB more by installing the ext.ROM of the qtek instead the one of t-mobile, since qtek is just 0.5MB vs 3.5MB from t-mobile. I did not really find a difference in performance.
Does anyone know of any similar "simple" tricks that would release more memory? at what ever price, but everyone has different needs, so it may be an option for some people?
check the WIKI!!! weve added alot of WM5 reg tweaks to it now, mainly making teh phone to what was expected when getting it out of the packaging!!
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Actually I have (and that is where the the phone skin thing comes from)
but it did not mention that not only you loose the skin but also the video phone feature and gain 10MB..so actually I am wondering if this happened to me only because I am using the combination of t-mobile ROM and qtek ext.ROM??
and then: none of the reg hacks in wiki seem to free up some RAM (at least as far as I can tell..but I really am just a little better reg. user, I cannot write one line of code...)
When you say your program memory increased by 10 Mb, does it mean that you now have 55 Mb of memory avalable?
I have a Jasjar and i recently hard-reset my device. When the Ext.Rom was about to install, i soft-reset the device. My device i now 40% faster, and i am NOT exaggerating. All the bloatware from i-mate didn't get installed which is perhaps the reason the Jasjar is working as fast as any other device, SIMPLY SUPERB.
@Andy,
When i go to "HKEY_LOCAL_MACHINE\Security\Phone\Skin ", i get 2 folders with further sub folders and one entry.
The 2 folders are:
1) Dialer (with further subfolders such as Landscape and Portait etc)
2) Progress
The last entry available is "default which has no value set".
I don't see any entry that plainly says "Enabled". Solution?
I've been harping on about the curse of the phone dialer skin since writing VJBigPhone. I was forced to install the skin etc for compatibility, and it makes such an enormous difference, slows things down so much. If you don't care for the bubbly buttons, remove it ASAP. You'll have much faster screen rotations and generally feels snappier.
Also clears up unsightly rashes
V
Trust me, after resetting the device prior to Ext.Rom installation, my Jasjar is now BLAZING fast and in now way is this an exaggeration.
@universaldoc:
you see, I have two more entries on that page. below this default string comes the dword "enabled" entry that has to be switched from 1 to 0. and below that one comes the string phcanhtc.dll
What I am observing, is: I did an installation prior to this one, with no ext ROM. that gave me the same amount of program memory as I am having now. the difference is only, that now I have some functions that were missing when I did not install ext rom, for instance I did not have the voice commands. and also not the video calling, same as now.
So what I think is: since you did not install the ext ROM, maybe that is the reason why you do not have these registry entries....because there is nothing to disable, since it was not installed at all? what do i know...lol..
and to answer your other question: my MDA Pro has 50MB of program memory, this value remains unchanged. But, with the skin enabled, I had 17MB (!) after warm reset...(1900 contacts, a few today plug.ins)...and it was hardly viable. And now i have 27....so much better.
Also: i have the latest (german) t-mobile rom (1.20), i find it much more stable than the first one which was terrible. and the qtek wasn't bad either.
(german version too)
Well after taking a rough guess into what all the bmp's are for the dialler and that awquard quickdial pad thing i get around 1.4mb of images the the portrait and landscape backdrops 500k between them, shame they aint removed totally!! that would give 2mb more rom to use.
Someones got to sort a nbf editor out! *wink plz!!! i'd really like to be able to make a rom with all MY apps and layout in it
phcanhtc.dll is surlly whats causing it, what else does that call on, can anyone dicect it?
I also tried a rotate whilst on the phone screen and its dam near instantanious
and tbh i actually quite like this skin, simple, does what it says on the tin.
I use pocket informant 2005 for dialling out normally non frequent numbers, and use the phone app to just do most common numbers from the call history.
non the less its an odd way to get more performance, i like it
Hi Andy,
Thanks for the response.
You might be absolutely right. Since i didn't install the Ext. Rom in the first place, i don't have these entries. Also, at present, i have 27Mb of program memory free which is exactly what you have I was thinking that you actually got 37Mb of memory free which IMO would be Fan-bloody-tastic!!!
Thanks anyways.
AndyME said:
I have to admit that it was by mistake (actually I was looking to get rid of the t-mobile phone skin) that I stumbled over a nice way to get 10MB more program memory out of the MDA Pro:
HKEY_LOCAL_MACHINE\Security\Phone\Skin
"Enabled"
Change from "1" to "0"
as a result of that, you cannot make videocalls anymore, but you can change this setting back within 2 minutes...(resco reg editor brings up the latest entry at startup so its right there, and then warm reset) and the ugly t-mobile skin is gone and replaced by the original nice blue windows skin.
I also squeezed 3 MB more by installing the ext.ROM of the qtek instead the one of t-mobile, since qtek is just 0.5MB vs 3.5MB from t-mobile. I did not really find a difference in performance.
Does anyone know of any similar "simple" tricks that would release more memory? at what ever price, but everyone has different needs, so it may be an option for some people?
Click to expand...
Click to collapse
Hi AndyME
Thanks for this tip. I applied this to my Dopod 900 (Universal sold in Singapore) and my RAM increased from 20M to 27M.
I might just do a hard reset and then follow universaldoc's suggestion of soft-resetting before any Dopod bloatware installs.
On the whole I am happy with the performance of this device as it is now, especially since I upgraded the Radio to 1.60.00.
i a mglad it was useful for you. you can always check the difference between this way and the reset as per universaldoc and see what suits you better.
Hard-resetted my jasjar
Soft-resetted before extRom installation
Result is: everything is working better, from signal level, to phone calling, to internet browsing. Thanks for the tip!
I'm interested to know you guys. I've always done the ext rom skip, but do you find it has any effect on your use of Voice Command. I'm suspicious why someone who didn't do the skip, but is using the same headset, doesn't have the problem I have, whereby the audio gateway is left open and I can't close it by pressing the headset button.
V
when I once skîpped ext rom, i noticed that voice command seemed not to have been installed (at least I did not see it in the programs)
now, that i just disable the phone skin, i feel i get all the benefits the others are reporting, but i have full voice control support.
but i have installed a qtek ext rom on a t-mobile rom, as mentioned above, and the qtek is just 500 kB while t-mobile is 3.5MB
so it is probably anyway difficult to say what is the content of the various ext roms, they can be quite different i would guess...
I have actually 30mb on reset, if I disable my auto starts, it drops down to 26mb on boot up when I am running:
1. M$ Voice Command (cant get rid of the old, but dont use it)
2. SPB PP (beta 3.1), SPB Diary (latest), and SPB Weather
These are my today plugins and startup folder.
I also skipped the extended rom entirely, and then selectively installed the bits I wanted using total commander to copy the specific extended rom items i wanted, and the phone wasnt one of them, I dont know anybody with the video bit anyway.
Dont use the antivirus...
I think your bluetooth problem might be rectified by te .cab noted as SSD BTUR_Patch_for_BT.
Without the extended rom, and few of the other registry tweaks, I get awesome memory, awesome startup, awesome screen rotations, never hangs except for 3rd party apps, never misses an sms, rings at the beginning of the first ring.
Yes, I agree, the phone video things sucks heaps of resources, skip it if you dont use it.
Mind you, after a day of hardwork, wifi, internet, lots of mail and playing, it does drop down towards the 20 - 15mb mark, but overall, I am happy with it...
So in summary, just skip the rom entirely, and consider just your bluetooth patch file.
simon, what other registry tweaks are you recommending?
Hi all,
allow me to jump in on this subject. Just did another hard-reset this morning to build a new system fromscrap as I had a huge problem (memory was used by whatever and I did not get further then the today screen).
I am using the Jasjar 1.13.53 WWE and have an empty ExtROM. I noticed that if I only install the .cab for BT (SSD_BTUR_Path_For_BT_Cannot_Initial.sa) I get stuck without the smart-dialing. For me it only starts working if I install to more .cab files :
Signed_eCall_vMail.sa and
Default_Enable_VT_RTPlugin_0727_2_signed
I am having a system which has 30 M free on startup, but only until I start using ASync to get my contacts and calender in, the system immediately drops down to 24MB after that.
Do You guys know another way of getting the smart-dialling working except for the above mentioned .cab-files ? I do not need the video-call at all, wouldn't miss is at all, so would very much like to get more speed excluding it at all. On the other hand I do not like the original dial-skin and would like to overwrite it with the ones from Vodafone.
Is such combination possible ?
Ruud
Ruud, I am afraid, I cannot help you..but it is always so frustrating to get no replies...
i have a VPA iV too (MDA Pro was lent for 3 months only and i will have to return it), i understand what you are talking about, the voda skin is sooooo cool...i asked VJ and he told me that:
"You can grab themes by find the *.tsk files in the \windows\ folder. While you're there, grab all the *.gifs and *.bmps that you can. You should be able to reassemble all the themes from there."
since this was only yesterday, i have not had the time yet to do it. i will try though.
also: on buzzdev.net there is a downloadable skin that is basically the voda skin..unfortunately when i installed it over the default windows skin (the naked blue one) it did not really work. try for yourself...
I have so far kept the vodafone installation as is, it has a very small ext rom of just 2-300 kB, and just removed the skin enable command in the registry which brought 10MB same as on the MDA Pro. (and I do not see the beautiful phone skin anymore...
Why actually did you not keep the voda installation? I think the new (german) t-mobile 1.20 is more stable, but it is definitely better than the old t-mobile was. is it your feeling that jasjar is better than voda?
Hi AndyME,
First of all, I have a vodafone because of my contract with them in Germany, but I am actually a Dutch guy living in Russia. There is no need for the German language, actually I do not like any other language then English for everything in electronics, specially software.
My hope that the device would be multiple language was gone at the moment I unpacked my package. So I used the website here to change to english.
I have all the .gif, .jpg and .bmp from the vodafone installation kept for backup purposes, but had to change them to fit to the iMate size. Also not all the transperency is working like I wanted.
Do You know the .cab file necesssary for just changing the skin ?
It is quite some work to install each of them seperately, softreset and if they do not do the trick, do a hard-reset before You try the next. I found out that the combination of the two I mentioned before helps, but maybe I need this DiscoButton as well ?
I have asked this question before, but did not get an answer, does somebody know what thedifferent .cab-files are for ?
MASD_Enable_VT_RTPlugin_0727_2_signed
MASD_Ringtone_GER_reg_0727_signed
MASD_UXC_DE
MSD_CAB-Customization-VodaDE-Universal-01-05-20Sep05
MSD_CAB-Shortcut-Voda-9Aug05
Signed_AddFavorite_DE
Signed_Connection_GER
Signed_DisableSL
Signed_DiscoButton8.sa
Signed_eCall_vMail.sa
Signed_pIE_About
Signed_PortalDefault
Signed_RemoveFav
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa
Signed_SSD_Shortcut_GER
Signed_UAProf
Signed_Version
Signed_VodaDE_MNN.sa
regards,
Ruud
i just got my self an O2 XDA Orbit and i'm wondering what are the best apps and roms to have. i know it's a lil up to preference - i'm interested in the opinions out there. I already picked myself up copies of opera and cardexport 2 (i used the palm version and was very impressed). My main concerns is that i have previously been told that a firewall and a virus scanner were needed. Is this true?
Also i have read a lil bug the sd card issue. how do i know it has struck me? is the fix i have seen good?
i'd also love to be able to play fps games on the device when i am away. goes anyone know of any good review sites and/or shops? i also love playing GPL (general public license) games on my linux machine (no windows machines in this house. may have to, begrudingly, get a cheap laptop if i get problems with the device) so if there are any good free ones i will take a look.
I think that will cover it for now. if i get any more questions i will post and thanks for your thought guys and gals
if you feel progressive you'll start by joining the touchflo club using B&B4 rom (-->here<--). that might be a bit ...well, progressive.. if you just got the device, but hey, you got it for playing around like the rest of us, right?
before you flash a non-original rom to your device, make sure you read this thread. i recommend to ALWAYS use USPL before flashing something.
soardiac said:
if you feel progressive you'll start by joining the touchflo club using B&B4 rom (-->here<--). that might be a bit ...well, progressive.. if you just got the device, but hey, you got it for playing around like the rest of us, right?
before you flash a non-original rom to your device, make sure you read this thread. i recommend to ALWAYS use USPL before flashing something.
Click to expand...
Click to collapse
whats the difference between B&B4 and the official wm5 and wm6 roms? i do have the o2 wm6 update rom but i haven't installed it (coz i hadn't looked up how yet). so the phone is pretty much stock.
I bought the phone as a work tool but as i'm a techie and techie's get bored and wanna tweak stuff there is room for tweaking
The B&B4 ROM is WM6 but has extra features such as touchflo: like the HTC touch, certain finger movements make access to contacts, messages, music easier and finger scrolling like the iphone. It also has a much cooler look.
For WM6 and thus probably B&B4 there is a reg hack to reduce CPU usage: http://forum.xda-developers.com/showthread.php?t=308792
To put a new ROM on your device, It is recommended to flash with USPL unless it is from your manufacturer and for your country. USPL allows other ROMs to be downloaded without disabling your device. I could describe it as a sim-unlock for ROMs, if you use a sim from your carrier, all is good, if not, you cant use the phone. A little more serious than a simlock though, if you flash the wrong ROM without USPL, it could damage the phone/bootloader so as to make it a 'brick'.
To flash a ROM, make sure device has more than 50% battery. Soft-reset it and wait for it to load. Plug into usb port and wait for activesync to recognise. Run USPL and a command prompt will load, wait for it to finish (~5 mins). A new window will open with a picture of the device, tick boxes, click next then update... A progress bar will let you know how far the download has got to. Once complete, the device will reboot to wondows mobile. It is now temporarily CID unlocked with a SuperCID. Now run the exe for the ROM you wish to flash. The same kind of interface will appear as before, tick boxes, next, update... Watch progressbar eagerly (wipe drool off mouth) and let it complete. Your device will reset with new ROM.
If at any point a problem occurs, aslong as you see windows or a multicoloured screen (the bootloader) you can do this (whole) process again to complete installation.
Hope this rather messy post helps you out a bit. As to applications, somewhere on the FTP site I think is pocket doom. BEWARE: Some files on the FTP site are viruses, not detectable by antivirus software.
Pete
wicked and that leads me on to my Anti virus question. is that any anti virus tools for WM5/6? iirc i have seen some pc side ones that scan the phone if it's connected and the app is setup for it. also is a firewall advised? are there any?
There are a few antiviruses for PDAs, but TBH the only viruses I have heard of for them are proof-of-concept so I doubt anyone really bothers.
If you really want an antivirus, I've tried this before and it seems to be ok http://www.freewareppc.com/utilities/airscannermobileantivirus.shtml
When I mentioned viruses on the FTP site, I meant for your home PC!
oh right. i run linux so it's pretty much impossible to catch a virus infection. although i spose caution would be needed if i needed to install windows for something. i'm trying to install stuff straight to the device from the net atm using cabs and i have a tool that strips the cabs out of the exe files so all looks good there.
one question that has just crossed my mind (coz i just tried to do it and couldn't). Is there a way to install cabs once they have been save to the eeprom or memory card? i checked out "File explorer" for an option and didn't find one. "remove application's" seems to be remove only so, i'm a lil lost as to what to use. If i hit open in the d/l dialog in opera or PIE it installs them. Any tips?
You should be able to just tap them in flie explorer and they will run... You'll get a notification asking whether you want to run and then the usual installer screen will come up asking where etc...
i have to admit i didn't try that. i was thinking too far outside the box
thanks for all the help so far btw
No probs, I'm not an expert, computers and techy things just seem to come naturally to me!
same here but i'm known to have moments of thinking too abstractly and after using linux for so long i have kinda gotten used to having to think to get most of the things i do done.
i just saw some screen shots of B&B 4 and i do have to say "how good does that look?" i can't seem to find a feature list. i found it the other day. seems to have vanished in to the depths of the board tho. any clues?
Well I've got B&B4 and I must say It's probably the best ROM you can use on your Orbit... The black and blue go really well with the black and blue (duh) of the Orbit...
Heres the post for B&B4 with some screenies and the programs list: http://forum.xda-developers.com/showthread.php?t=321503
It's basically WM6 based, with TouchFlo making it a bit like an iphone where you can use your finger to scroll through stuff. Other finger friendly interfaces like the new today screen interface (with quick contacts access, programs, weather, time, phone profiles etc), htc audio manager, new skin for wmp, some very useful utilities, etc etc
Like WM6, and in the (edited) post I made earlier, you should carry out the reg hack to reduce cpu usage, other than that, and needing a separate cab for live messenger, it is _thebest_
If you decide to flash it, remember to use USPL...
i may do. i think i'm gonna check out my options first. i don;t wanna mess about with it too much because it is spose to be a tool for work. but seeingas realvnc works pretty well i think i'm pretty much covered for my objectives in the software department except for GPS software. money is no object there. i want the best. i heard tomtom was a bit unstable (from a treo 750w user) so if that's true i'm gonna stay away from it
Tomtom seems to work fine on mine so far ...
As a 'working' tool
I've tried all the flavours of roms out there - but didn't like the touchflo stuff on B&B4... I need my today screen to have my calendar and messages on it, so the big clock is no relevance, and the touch stuff is gimicky.
I'm running O2 WM6 on mine, with a few tweaks. It's definitely most stable, and quite fast, although I run batterymeter to overclock to 240-ish mhz for a bit more slickness.
I also use todayagenda to replace the calendar plugin as its far more useful.
I have a synchronisation with my corporate Exchange server for office mail, and route my personal mail throuh an excelllent free imap service at www.axigenmail.com - simple imap servers, no frills, works excellently.
TomTom 6.02 or 6.03 work absolutely fine, no issues whatsoever.
I've just started using SPB PhoneTools on my todayscreen to give me a decent quickdial in the car... I've just replaced my car stereo with a Sony MEX-BT2500 unit (£90 on ebay) that gives full bluetooth handsfree integrationand streaming with minimal fuss.
Hello all!
For quite some time, I've been playing around with different interfases, looking for the one that would best fit my needs.
A few may have skipped my net, but I've been through WAD, Pointui, Ifonz, Winterface, etc etc, and believe me, etc etc etc
None of them seem to be the "all inclusive" I needed until after many weeks, decided to stick to Winterface, primarily, thanks to the work of davehutch and oscarbum with their Stickerface and Tenius themes which made Winterface a bit more palatable.
Yesterday I came across an article at mobility site which spoke about a Winterface version for the i-mate (http://mobilitysite.com/2008/12/vito-powers-i-mate-go/).
In a nutshell, it's a new Winterface version made for the i-mate, but here's the thing:
1) It's a 100% free version (aka, activated)
2) From what I've seen, it works on any wm5 and wm6 device
Why bother? Ok... Here's why: I understand that the "black" themes are having their moment, but the truth is they are unreadable in daylight conditions. And as crazy as it may sound, I use my phone outdoors.
So this version has BIG chunky icons on a white background which makes it very easy to read and see with all the Winterface benefits.
I'm sure the likes of oscarbum and davehutch can come up with some new icons, but this is the refreshing change I've been after some time.
Enjoy and let me know how you went with it.
** Added the cab for your reference **
fantastic, I never liked the small buttons of winterface when using my mda compact iv, it was too difficult to get them to work since the screen is quite small for a vga device.
works great, I can't thank you enough
Hey, no problems. I'm glad to start contributing for a change!
hey man thanks for putting up the .cab file (been looking all over for this) but do you know if it'll do fine on a QVGA or VGA
Works fine on QVGA, even works on WM2003.
Only caveat with this version is it's not full screen and it is so easy to close Winterface by accident. I raised this with Vito and was advised to upgrade to the newer version.
That said I have tried to live with it but have ended up going back to a modded SPB MobileShell as it shows more on my home page.
How can you make this 'today-app' be the one always shown if you start instead of TouchFlo?
I have the Touch HD/Blackstone
/edit
nvm.
Someone told me that it's not a today-app xD
So it won't be a home screen for me.
Default Today Screen??
Is there a way to make this interface the default today screen, I keep accidentally closing the program
Hi guys. Got a strange problem when trying to run iGO8 with my Tilt 2. I was always having problems with getting the Text to speach to work on with the HQ US voices (Susan v1.84 for example). After much testing, I figured it was the amount of free ram so I loaded up mort scripts and created a routine that would unload TF3D, clean the ram, and load up iGO. This work some of the times but other times it would not. A reboot would help but not always.
I finally got around to doing the hardspl and loaded up some of the posted ROMs on the forum. What is interesting is that any rom based on the TP2 worked fine, TTS worked without having to unload TF/Sense. But when i use a ROM meant for a Tilt2, same problem as my OEM RAM no matter how stripped down.
What could be the key difference? I tried rebuilding iGO from scratch based on other peoples post but no dice. What is interesting is that iGO seems to know which phone it is loaded in. WHen i am running a Tilt2 rom, the volume hard buttons are supported by iGO so pressing them actually changes the volume of iGO itself. But when I press them in a TP2 ROM, iGO ignores it and it changes the volume of the phone itself.
Thanks
Ernie
I'm having the same problem any help would be appreciated.
sorry, not meaning to hijack your thread, but what skin are you using for igo on your device. I'm trying to run it off the storage card which i used for my previous device, tilt, and at first it ran but wasn't utilizing the entire screen, so i downloaded a wvga skin from some site and now it won't even start, just keeps crashing on the boot up screen
check your data.zip file...
_ww.tomsoftware.net/default.aspx?pg=a97e138a-5d21-4468-a879-5d968a048707
Check out Tom's skin, really nice actually. But there is a trick it uses in that it has to uses the 400x240 vga skin version. Not sure exactly why it has to be this way (half the resolution and all) but it works. Also, if you are using above a certain version (his site explains), you have to rename the folder ui_igo8 to ui_igo8_da in the skin.
It seems to be running a little better now that I have done rebuilt my igo setup on the SD card from scratch. Still have to unload Sense but at least the voice is working - for now. Only thing I can think of is that volume control is somehow interferring with the TTS in memory.
Strange...
Ernie
Well, I might have solved the problem but I wont know for sure until I have used it a little more. I updated my iGO exe to version 8.3.4.117940 (Nov 3 2009). The TTS seems to work without have to unload Sense (using eras2r's great ROM which aimed at the Tilt2). I have EVERYTHING running including sense, push email with Exchange Server, POP email, Weather, programs, etc. I am also running the skin I referenced above so everything is as max out as possible in terms of resources.
Ernie
I've owned an AT&T 8525, and Tilt. I've now got the Tilt 2, and and worked around most of the bugs to make this a usable phone with hotfixes. I'm trying to edit the registry for tethering per other posts on this forum, and I get an "Access Denied" for that registry key. I've used two different reg editors. BTW, they are desktop-based mobile phone reg editors. Did AT&T get smart and block editing on certain keys?
Don't use a desktop Registry editor. Use one from your phone, I use this one
wgrayson said:
I've owned an AT&T 8525, and Tilt. I've now got the Tilt 2, and and worked around most of the bugs to make this a usable phone with hotfixes. I'm trying to edit the registry for tethering per other posts on this forum, and I get an "Access Denied" for that registry key. I've used two different reg editors. BTW, they are desktop-based mobile phone reg editors. Did AT&T get smart and block editing on certain keys?
Click to expand...
Click to collapse
check this out: http://ceregeditor.mdsoft.pl/
it can unlock reg keys from windows
wgrayson said:
I've owned an AT&T 8525, and Tilt. I've now got the Tilt 2, and and worked around most of the bugs to make this a usable phone with hotfixes. I'm trying to edit the registry for tethering per other posts on this forum, and I get an "Access Denied" for that registry key. I've used two different reg editors. BTW, they are desktop-based mobile phone reg editors. Did AT&T get smart and block editing on certain keys?
Click to expand...
Click to collapse
I used SK Tools, works on the fone as the first mentioned here... Although its not a free program. I did in fact do what u r trying to do with my Tilt 2. Its also possible that, if ur using windows 7 or Vista, that u need to open the program as "Administrator". (Right click and open program as Administrator)... Ive found this has been a problem for many programs I use between the fone and the computer. Hope this helps.
Figured it out!
Thanks for the reply. I read a couple of similar threads that suggested the free CERegEditor that featured an "unlock"that allowed me to make registry edits. Worked like a charm. Which is great. I can now officially keep my tilt2 because I've worked through nearly all of its problems and deficiencies. Being able to tether was was BIIIIIIG deal for me.
Wouldn't it have been easier to flash a custom ROM?
Moving your thread to general, not development.
Russ
I think you need to enable / unlock rapi access. Do a search for enablerapinew.cab. I believe it is also packaged with HardSPL.
Wasn't at the point yet of flashing custom ROM
I've been tweaking HTC 8525s, 8925s, and now Tilt2s for about 4 years now. I wasn't ready yet to flash a custom ROM. That would have been the last resort.
wgrayson said:
I've been tweaking HTC 8525s, 8925s, and now Tilt2s for about 4 years now. I wasn't ready yet to flash a custom ROM. That would have been the last resort.
Click to expand...
Click to collapse
Ive had the 8525, the Tilt, the Fuze and now the Tilt 2. Flashing custom ROMs r VERY worth it. If u have any tweaks worth sharing, me and Im sure the entire XDA community would appreciate it