Hi guys,
I need to get a bigger microsd card, but i would very much like to buy (and use) the new sandisk 4gb micro SDHC. I read in another thread that it might work after WM6 upgrade...
i've also read this press release stating that new drivers are available also for the omap850...
Can someone confirm wether or not a 4gb micro SDHC works after the WM6 upgrade?
thanks!
no, wont work. there is different sd-reader HW. You are asking questions like if i can play DVDs on my CDplayer after firmware upgrade. NO IT WONT.
phsnake said:
no, wont work. there is different sd-reader HW. You are asking questions like if i can play DVDs on my CDplayer after firmware upgrade. NO IT WONT.
Click to expand...
Click to collapse
I don't think you've read the pages i linked to. The first is a thread here on xda-dev. where someone tells us that the upgrade to WM6 brought sdhc to the trinity... so that would tell us it is not a hardware thing.
the second link tells us about a softwarestack to bring sdhc to (among others) Omap850 ... so that's why i would like to know if someone that has actual hands on experience with the combination WM6 & sdhc cards could tell us if it works, instead of someone just bloating without looking.
geezer78 said:
so that would tell us it is not a hardware thing.
Click to expand...
Click to collapse
Regarding Trinity: The Software upgrade also brought GPS to Trinity. So GPS is only a software thing??
I guess Trinity has already SDHC compatible HW chip inside, just the SDHC drivers were missing.
2esackbauer
Well, and why do you think Artemis has no SDHC compatible chip inside? Are you an insider? Recall please,
HTC has not ever declared the fact that Trinity has got SDHC compatible chip inside, either. Moreover, Trinity can not work yet with SDHC cards running officially issued ROMs installed.
as far as i understand, they are speaking about drivers for CPU beccause as i know OMAP, Marvele.... are CPU's. So it means that those drivers will be able to communicate with CPUs mentioned in that article and SDHC hw. Still we are on the same point, if U have cd player it wont read DVDs. Other thing is if Trinity has SDHC hw. but i dont believe so. It will be unreasonable expensive for htc to built it. You can argue that Ericcsson T10 and T18 were the same except for active flip and vibrations, but the reasson then, was in amount t10 and t18 sold(or expected) and price of changing or making another line. I could believe it in case that htc already presented Arte lookalike with SDHC supp. but in this case i simply dont. BTW as i remember, Trinity was presented in betas with GPS, and when it was launched it was widely known that it has GPS chip+antena, but they launch it without drivers because there were some troubles with comm between drivers and chip and OS, and it will be too expensive to delay launch of trinity even if it was w/o GPS
esackbauer: in this case was GPS only SW prob. (btw i like beer too)
nemo8: do you think that if you can enable SDHC only by new drivers, here will be numbers of those drivers in beta versions for downld?With 10-50%functionality? For ex. at least using those drvrs u would be able to read directory tree? i believe that yes.
HTC has not ever declared the fact that Trinity has got SDHC compatible chip inside, either. - i dont have trinity but can U give me link where u found out that it has SDHC hw? DOes it have SDHC supp on cooked ROMS?
From wikipedia:
A new SD format, SDHC (Secure Digital High Capacity), allows capacities in excess of 2GB (4GB to 32GB)[10]. SDHC uses the FAT32 file system which supports the higher capacity instead of FAT16[11]. It uses the same form factor as SD, but the SD 2.0 standard in SDHC uses a different memory addressing method (sector addressing vs byte addressing[12]). SDHC cards only work in SDHC compatible devices, but standard SD cards work in both SD and SDHC devices. The SDHC trademark is licensed to ensure compatibility.[13]
Click to expand...
Click to collapse
All changes are in logical access. According to this, driver change could allow to use SDHC card in devices.
DOes it have SDHC supp on cooked ROMS?[/QUOTE]
Yes, it does have SDHC support on WM6 ROMs cooked by two talented ROM-creators, whoose nick-names are mun and lvsw. I have seen it with my own eyes(it worked successfully with 4G miniSDHC). And therefore I hope p3300 also would be able to support this card format running WM6 OS. The new driver might have been included into officially issued WM6 ROM. We just need someone to check that.
nemo8 said:
DOes it have SDHC supp on cooked ROMS?
Click to expand...
Click to collapse
Yes, it does have SDHC support on WM6 ROMs cooked by two talented ROM-creators, whoose nick-names are mun and lvsw. I have seen it with my own eyes(it worked successfully with 4G miniSDHC). And therefore I hope p3300 also would be able to support this card format running WM6 OS. The new driver might have been included into officially issued WM6 ROM. We just need someone to check that.[/QUOTE]
Marvellous! In that case I would have to try it out on my XDA Orbit then. Just waiting for the 4GB SDHC to arrive. FIngers crossed.
OK then i appologise, it will be perfect to have sdhc supp on artemis (if u check size of W-Euro map for tomtom - some 850mb) it will be marvelous. I never heard of making sd devices working with sdhc, but if you've seen trinity working with SDHC i simply believu You. btw i think trinit was released before arte(month or two) so there is a chance to have same sd hw. Sorry again, that i didnt believe it.
mavericke said:
Marvellous! In that case I would have to try it out on my XDA Orbit then. Just waiting for the 4GB SDHC to arrive. FIngers crossed.
Click to expand...
Click to collapse
Excellent! I am Really looking forward to your experiences!
mavericke said:
Just waiting for the 4GB SDHC to arrive. FIngers crossed.
Click to expand...
Click to collapse
Any Luck Yet?
alright gutys got wm6 running. went into my local o2 store and tried one of the sandisk 4gb. DOES NOT WORK!! the only dam phone they work with without any modding is the n95!!!
coz83_2000 said:
alright gutys got wm6 running. went into my local o2 store and tried one of the sandisk 4gb. DOES NOT WORK!! the only dam phone they work with without any modding is the n95!!!
Click to expand...
Click to collapse
Maybe we need some (cooked) drivers? i believe that was necessery for the p3600 as well??
thanks for giving it a try though!
Has anyone tried the official HTC ROM and tried using the 4GB MicroSDHC card?
i ve got the XDA orbit with the HTC WM6 ROM installed and the 4 gig SDHC CARD DOESNT WORK
;(
That friggin sucks!
Just find this driver : SDIO Hx version 1.1
Compatible omap850 on wm5 and wm6
That driver does what exactly? Has it been tested?
jontymisra said:
That driver does what exactly? Has it been tested?
Click to expand...
Click to collapse
"BSQUARE announced the availability of SDIO Hx version 1.1, the newest release of its ultra high-performance software stack for Windows Mobile and Windows® CE devices. Version 1.1 features support for next-generation high-capacity memory cards. SDIO Hx version 1.1 is the only software stack with both Windows Mobile and Windows CE support for the new Secure Digital High Capacity (SDHC) standard defining high-performance memory cards from above 2 GB to 32 GB."
more information here
Thx for info geezer78
Related
From PRETEC, here:-
http://www.geekzone.co.nz/content.asp?contentid=6609
:lol: :lol: :lol:
I found one on eBay for £96.00 + £4.00 p&p.
150X 8GB OEM SAMSUNG SECURE DIGITAL SD CARD 8 GB G NEW
Looks good.
Gonna test that on Universalinux too?
wonder if it will work in a prophet (JAMin)
RE
If your PDA do not have a SDHC slot then PRETEC card is not backward compatible
Quote
"SDHC cards are recognized by new SDHC host devices differently than standard SD cards and are not backward compatible with legacy SD format host devices. "
Bad luck!!
What IS SDHC compatible?
I was gonna ask that one, so i will ask it anyway!
What is SDHC?
Never mind, i found this information:
http://www.sandisk.com/Assets/File/pdf/retail/SDHC1.pdf#search="sdhc compatible"
But now we need to know whether our Universal is SDHC compatible or not. Has anyone managed to find out if these new cards work with our PDA's?
Maximum capacity for this device: May support up to 2GB
But we know that's already true. So...
This quote is right from the article linked to by the first post here...
The maximum capacity of SD card is 2GB under SD 1.1 of Secure Digital Alliance (SDA) specification; however, by using file format of FAT32, many SD 1.1 host devices can use a 4GB SD card. SD 1.0/1.1 uses traditional "Byte Addressing" scheme which limits the maximum capacity to 4GB while SD 2.0 adopts "Sector Addressing" scheme which can reach the maximum capacity of 2TB (2048GB).
Click to expand...
Click to collapse
In other words, they 'cheat' to get the Universal and other SD 1.1 devices to see 4G, but that won't work with the 8G cards.
Brett
Would the Universal still not work with an 8GB SD card if that card was partitioned into 2x 4GB's? It certainly would be helpful if someone could try this? You just never know!
re
I guess no one will know for sure until someone tries it. BTW how do you partition a SD card anyways? Do you really think that could work?
hello
if SD 2.0 is the later version then would not all new 4 GB SD cards support "sector addressing" which would limit the ma. capacity to 2 GB
I have a 4gb that works in uni
I keep reading that people aren't able to use anything above a 2gb SD but I have been using a 4gb that I purchased on eBay for pver 6 months now. I used in with the original Jasjar ROM and also with JWrite's, Indra, and currently Helmi's. (not with the WM6's yet though)
It is interesting to note however that it won't work in any of my desktop or laptop systems without the included dongle. Not even the built in SD slot in my TC1100 tablet.
It says it's made by a company called "TopRam" if that helps anyone.
I also purchased an 8gb that SUPPOSEDLY supports SD 1.1 and 2.0 according to the documentation. It took a great deal of hunting to find one that didn't say it was HC and I'm still skeptical as to whether or not it will actually work, but as soon as it comes in and I have a chance to try it I will post the results here if anyone is interested.
I know there are one or two people here who make claims of such things, but if there are any doubters I will take some screenshots of the storage card memory screen if I need to.
SDHC uses a different software for the controller. The hardware is exactly the same. The point I'm trying to make, is that the SD people went to very radical lengths to ensure that there is no compatibility betweens SD and SDHC. They also have two different kinds of memory addressing. Bottom line, you can't use SDHC. Your device must say SDHC, and AFAIK, no PDA is SDHC compatible. With all of that said, I'm a Scoter owner, and we have valid reports of being able to access SDHC cards from a PC, through my device. It may be possible to create drivers for the SD controller, or create some kind of emulator, but that is a long way off. I've seen similar threads about those asking about 4 GB and 8 GB. Unfortunetly most don't understand the difference between SD and SDHC. SD is capable of 4 GB. SDHC starts at 2 GB and has potential in the terrabyte range. In addition, many of the real cheap 4 GB SD cards don't strictly adhere to SD standards, and may work on some reader designs, and not on others. A perfect example is that I bought a 4 GB SD card, that only works on one card reader, but not my PC reader or PDA.
Regards,
Jason
SDHC Patch
I just read on a forum for Palm Treo that they have a working patch for the Treo which forms compatibility of SDHC on the Treo.
Now perhaps we can take a lesson from them and see what changes where needed to make it work. Besides, you can't tell me that there are more people working of patches for the PalmOS than WM.
well , the sdhc 8gb does not work on my xda exec-universal. so I just bought a 4gbcard "MyMemory 4GB 133X SD" from ebay that is stated as being compatible 21.94 pounds.
I'll just use my sdhc 8gb as an expensive mem stick in my sweex sdhc reader .
got it
So I received my 8gb (supposedly NON SDHC) and as expected, it won't read in my Jasjar. I am going to try and reformat it into 2 or 4gb partitions to see if that will work but I am going guess and say no. It is already in fat32 but it doesn't recognize the card at all in the PDA. Just to make sure it was in fact a full 8gb (7.6gb actually) I copied a handfull of movies (7gb) to it and then ran them on another laptop and it is in fact a good card.
I can't repartition it in XP since it sees it as a removable disk, so as soon as I get my Linux laptop back up and running, I will repartition it there and see what happens. I don't expect much though.
TBOMB said:
So I received my 8gb (supposedly NON SDHC) and as expected, it won't read in my Jasjar.
Click to expand...
Click to collapse
Could you, please, try AKU 3.5 ROM (Helmi 1.3.1 or Ivan B2)?
Because this ROM comes from device which support SDHC.
There were reports also, that Triniti with last Dopod ROM (AKU 3.5)
support Mini SDHC 4GB (maximum for mini SD now).
BTW tell us which ROM you are tryinng.
why not
If someone will send me the link to the rom files, I'll be glad to. I just don't have a lot of time right now to search the ftp site.
Two questions about Helmi's 1.3.1, first, will it support my bluetooth stereo headset like the pdaviet 207 I'm using now does? and second, I don't suppose any of these new roms has the new timechange fix already applied do they? I just don't want to keep reflashing my Jasjar and still having to apply all the reg fixes etc to correct for the new timezone/dst changes.
Guess nobody was in a hurry for me to test using the other ROMs as I have had no PM's with info as to where I can find the ROMS now that they are no longer on the ftp server here.
I find my copy of Helmi's aku3.5 1.3 and tried it with the 8gb (non-sdhc) card with no luck. I assumed as much. Not quite sure where you heard that it had SDHC support but I guess it doesn't.
I had the PDAVIET 2.0.0.0.7 or whatever the latest incarnation was and that didn't work either. I now have Helmi's WM6 1.1 that I put on last night and that one also doesn't work.
I'm sure we have some developers out there who know palm and ppc hardware who can take a look at the "fix" that was created for the Treo which allows SDHC use. I can "open" the prc file but I don't know enough about what I'm looking at to be helpful.
Not sure why this fix is so slow coming. Perhaps not enough people see the need for 8gb cards. I have a 4gb but I have to continue taking off stuff in order to put anything else on because it's always full.
Kingmax Digital Creates Global Sensation with World's First 4GB & SD 2.0 Compliant microSDHC Memory Card
I want one
That's great....
...now we just have to get the Artemis to work properly with memory cards in general!!!
Longhair said:
Kingmax Digital Creates Global Sensation with World's First 4GB & SD 2.0 Compliant microSDHC Memory Card
Click to expand...
Click to collapse
As far as i can see the artemis is not compatible with SDHC cards, this may be possible with a patch or rom upgrade - so guys dont rush out and buy one it most probably will not work.
meschle said:
As far as i can see the artemis is not compatible with SDHC cards, this may be possible with a patch or rom upgrade - so guys dont rush out and buy one it most probably will not work.
Click to expand...
Click to collapse
damn it. I'm super interested in one of these. fingers crossed
think its more hardware support that you need for SDHC, not entirly sure of this though
I read on another site that SDHC is basically FAT32 rather than FAT16.
If this is the case does that mean it could or couldn't be handled in software?
I've done a lot of searches, but I haven't found any thread that solves my doubts...
I have a 2 GB Sandisk MicroSD in my HTC P3300 and it works perfectly (in fact I never suffered the corruption bug), but this is very few storage for me so I need a 4 GB memory card. My questions are:
1st - Does it exist any 4 GB MicroSD (not MicroSDHC)? I've readen some posts talking about them and I've seen some links in eBay shops, but nobody has confirmed if they are fakes. Anybody could tell me if 4 GB MicroSD exist and where to buy them?
2nd - If you have a 4 GB MicroSD, have you tested it in your HTC Artemis? Does it work? Have you got WM5 or WM6? Official or "non-official" ROM?
3rd - If you have a 4 GB MicroSDHC, have you tested it in your HTC Artemis? Does it work? Have you got WM5 or WM6? Official or "non-official" ROM?
I've opened a poll to know more clearly if I have the possibility to upgrade my storage card or I'll have to bear with that poor 2 GB Sandisk... Please, vote and write a post telling which brand/model of Artemis and MicroSD/MicroSDHC do you have and what operating system and ROM version do you use
Sorry for my bad english, I hope you haven't suffered to understand this message
Thanks
Nobody has tested a 4 GB MicroSD/MicroSDHC in his Artemis? I cannot believe it!
Regards
Someone did test a 4gb card and it didn't work for hin. On my phone right now so doing a search would be a pain. Search for sdhc in the Artemis mobile 6 forum and you should find it though.
JanetPanic said:
Someone did test a 4gb card and it didn't work for hin. On my phone right now so doing a search would be a pain. Search for sdhc in the Artemis mobile 6 forum and you should find it though.
Click to expand...
Click to collapse
Thank you for your answer
The thread you were talking about is this one. In one of the last posts a person says that he/she has tested a 4 GB Sandisk MicroSD in the Artemis with negative results, but doesn't specify if it's a High Capacity MicroSD (MicroSDHC) and in which OS the test was done
I would like to know more opinions and to see votes from people who has tested also a 4 GB MicroSD (HC or non-HC), I'm sure that there are more users who has experience with this kind of memory cards and we all would have a more clear idea if they tell us the detailed results
Regards
Well if you or someone can point out a couple 4 GB cards that are available in the U.S. online I will buy up to 3 to test just to try and bring some closure to the question.
The only 4GB micro SD card I could find was out of stock (J&R music). Based on a little searching it seems to perpetually be out of stock. I added myself to get an alert should it come in however.
I have done a bit of research and I am pretty sure the P3300 will not work with a 4GB card, but I am willing to try.
It is not the traces or the pinout on the card as many have surmised that is the problem though. The SDHC uses FAT32 whereas SD uses FAT16. So unless the system has the capability of reading FAT32 the question of circuitry is moot. Everything I have read points to 2GB being the limit for non SDHC and that the P3300 does not support it.
Another common misconception seems to be that there are non SDHC 4GB micro sd cards. I see no evidence that this is the case. Furthering the improbability is the fact that the Fat16 has an upper limit of a 2GB partition. (There is an exception to this where the FAT16 uses 64K clusters, but this is unlikely to be done or work in ANYTHING without custom drivers. I never even heard of this till I did this research.)
None the less I would be happy to be proven wrong.
I've read a thread somewhere in this forum where a senior member (or was it a mod?) had drivers to make the artemis sdhc capable which usually is not possible if the hardware is not built for that. Search for it and maybe you'll find it.
I have read most of those threads and none are conclusive.
You also can not do anything with drivers if the hardware is not already compatible. There is not any question that the p3300 does not officially support microsdhc.
The debate rages and a thread like this keeps coming up.
From what I've read so far, the only thing required is a SDHC driver. There should not be problem on the hardware side.
Some say the WM6 ROMs have SDHC driver. My Wizard has WM6 and the driver on it looks different, but I don't have a SDHC miniSD to verify. Ultimately, to prove it works on Artemis, I need a 4Gb SDHC microSD so I can try the stock drivers and may be copy the drivers from my Wizard.
SanDisk 4GB microSD-HC DID NOT WORK on MDA compact III
Hello,
I`ve an MDA compact III which was delivered with WM5 OS. I`ve an 2GB microSD - Card from Sandisk, working perfectly. A little bit small that thing for my big fingers... =
Now I was searching for higher capacitys of microSD - Cards and found an SanDisk microSD-HC with a capacity on 4 GB. Bought for app. 60€ and testet on my device: NOTHING. No work. The WM5 OS did`t recognise the Crad. The card is`t shown inside the System. It seems like NO card inside the device. The card is OK. There was a little USB reader in the package, where I can access to the card.
OK, maybe it is the WM5 OS and I decided to upgrade to WM6. (German O² OS using the UPL method...) The upgrade was done in 10 Minutes, but the card works NOT! The same reaction like on WM5.
Now I`m wayting for an patched OS with (maybe) an SD-HC driver inside. Let`s pray...
Best regards, Sven
The Artemis is not able to read/write microSDHC Cards. The Interface of the Artemis permits only FAT16, microSDHC works only with FAT32. Artemis cannot recognise it. Normal microSD with 4 GB if should be at least recognised.
JanetPanic: Before opening this thread I had done many searches to get information about SDHC, and I know that SDHC compatibility is a hardware problem rather than a software/drivers problem. However, I hoped that our HTC Artemis had a SDHC compatible slot, looking at HTC Trinity's example... By the way, before the Artemis I had a Dell X51v with a 4 GB SD (non-HC) that worked like a charm; I expect that in a -near- future there'll be 4 GB MicroSD cards
lSSBl: Very interesting your MicroSDHC "review", althought you have ruined most of my hopes. Let's pray that future WM6 official ROMs will give the Artemis the ability to read MicroSDHC cards
AlfredENeumann: I tell you the same as JanetPanic, the HTC doesn't have officially a HC compatible slot and however it supports that kind of memory cards. Let's pray...
Regards
@AlfredENeumann
You're wrong. The Artemis accepts FAT32 as well as FAT16 SD cards, no matter if WM5 or WM6. But that has nothing to do with SDHC, what till now doesn't work with the generic WM6 drivers.
perhaps a solution: http://msmobiles.com/news.php/6308.html
http://www.sandisk.com/Assets/File/pdf/retail/SDHC1.pdf
That means, that the SDHC card is NOT backward compatible - you can't format it with FAT16, but you can format any 'normal' (micro) sd- card with FAT32, and it still works at the artemis. Tested by me, and a lot of other guys.
Has anybody Tried the SDHC driver from the HTC Trinity yet?
http://forum.xda-developers.com/showthread.php?t=293556
4 gb micro dilemma
Hey guys... see if you can help me out.
Installed the 4gb micro sd on my HTC Artemis and the SDHC driver from the previous post... windows mobile 5 doesn't recognize the card.
Not sure what to try, open to any suggestions.
c.
crap
Actually, after I've tried the 4gb Micro and installed the Trinity driver.. NONE of my storage cards are recognizable now. So I removed the driver.. and STILL none of my storage cards are recognized. BUSTED?!? Not sure how to fix this?
c
SanDisk have just announced an 8GB micro SDHC.... time we got these SDHC cards working in our devices! Anyone have any input on how we can find out if this is possible?
Sandisk 4gb SDHC no go
Hi all, just to let you know I tried all the WM6 rom's on these forums (thanks to all), reformated my sandisk 4gb microsd card fat 16/32 but no go..
(my 2gb sandisk card works fine with fat16/32), even tried trinity driver no go.
Hopefully the new WM6 rom from HTC this week will support it.
Hi everyone, has anybody tried the 4GB high capacity micro SD card on the Hermes using official WM6 ROM? I am thinking about getting one but not sure if it will work, so just checking first.
I have seen a thread under the HTC Universal about a new ROM of it supporting the 8GB high capacity SD and I am tempted to get one a try it on my HTC Universal (SPV M5000)!
Thanks!
Already answered HERE
Maybe a better question.....
Where can you buy retail 4gb micro SDHC cards? I can't even see them posted on Sandisk's site? I only see them listed on Ebay.
www.newegg.com?
ALL WM6 ROM's from build 17745 and above support microSDHC Cards...
walshieau said:
ALL WM6 ROM's from build 17745 and above support microSDHC Cards...
Click to expand...
Click to collapse
The hardware isnt support SDHC.
http://www.euroastra.info/node/2085
Oszi said:
The hardware isnt support SDHC.
http://www.euroastra.info/node/2085
Click to expand...
Click to collapse
try again idiot...
The hardware supports it!!!
I got mine from HERE
SD High Capacity memory card drivers for Fujitsu-Siemens C550 and Fujitsu-Siemens N560.
After installing this driver you have working WiFi!
Created by GreateVK and FreePK
This is really exciting stuff!!! unfortunately i won't be able to try this out until 1 month later as my N560 is critical to my daily routine until then (which is also when i'll be finally giving WM6 a go).
Been waiting for this for a long time... any more info? supported capacity? restrictions? compatibility?
GreateVK,
Will this work on an N560 with the original WM5 ROM, please?
Or does it have to be WM6 or WM6.1?
Thanks...
It works great on my N560 with newplow's WM6_016_net3_5 rom so far
Thank you master2048 for answering my second question.
But has anyone got it working on an N560 with the original ROM?
Does it install to main (user re-writable) memory or does it change a portion of the ROM image? If the former, then it might be possible to try it on WM5 devices and then revert by uninstalling the patch if it does not work...
Great work.
I use it on my N560 with original WM 5 ROM, and i use 8GB SDHC, so it works very well. Wifi is OK.
honzamo said:
Great work.
I use it on my N560 with original WM 5 ROM, and i use 8GB SDHC, so it works very well. Wifi is OK.
Click to expand...
Click to collapse
Thanks you for your reply.
And I can confirm that it works on my N560 with original WM5 ROM too.
I bought a 16Gb SDHC and WiFi works too. And ordinary SDs still work fine.
Excellent..... this has given my N560 a new lease of life.
Many thanks to GreateVK and XDA Developers. Brilliant work.
N56 SDhc Card Driver
honzamo said:
Great work.
I use it on my N560 with original WM 5 ROM, and i use 8GB SDHC, so it works very well. Wifi is OK.
Click to expand...
Click to collapse
I´d like to report the same good experience, the SDHC CARD Driver is working well on FSJ N560 original WM 5 Rom with a 4GB TECHNAXX Hyperspeed Card, WIFI ist running normal as used to be.
Thanks to the Developers
Axleu
can anyone comment on the speed of using SDHC? is it really able to sustain the Class speeds? cuz currently my Transcend 4GB 150x non-SDHC is really slow, but I know it's partly the card's problem.
-SKYLINE- said:
can anyone comment on the speed of using SDHC? is it really able to sustain the Class speeds? cuz currently my Transcend 4GB 150x non-SDHC is really slow, but I know it's partly the card's problem.
Click to expand...
Click to collapse
I have a Integral Class 4 16Gb SDHC. It is hard to say if it is any quicker than the Transcend (which I was using before applying the SDHC patch). I agree the Transcend was not zippy. But the Class 4 SDHC seems very fast. It is obviously imited by the Loox addressing/reading speed and therefore may not be able to take fulladavantage of the potential higher transfer speeds.
However, the few tests I have been able to run e.g. copying 8Gb of stuff on from a PC to the SDHC card in the free card reader that came with mine, was very quick. And there were thousands of files... large 300Mb plus and lots of small ones circa 1Mb. Also video playback on TCPMP was just the same as with SD cards - this would be a good test of sustained transfer rate....
So the performance in my judgement is the same and possibly better.
WM6 Rom
I bought Fujitsu-Siemens C550 recently and it came with WM5. Could some body let me know where can i get WM6 rom for this device.
I've installed this SDHC driver on my N560 with Team's 777 WM 6 ROM and so far so good . But I'm using a regular SD 2 GB. Now that I can get a large SD I may go for 8 GB .
THANKS TO THE DEVELOPERS
works beautifully
Problem aftet Hard reset
Aftter Hard Reset, the SDHC driver is gone. My N560 did not recognized the 8GB SDHC card any more. I had to reload the SDHC driver from the PC and only then I could activate my SPB Backup file.
Is there a way to add this driver in such a way that it will survive hard resets? Otherwise it will be a mess if someone needs to restore while being away from his PC
Please advice
I belive that there's an N560 ROM that has it built it. But you could carry a small capacity SD with a full backup, once you have it up and running you could put your SDHC again.
It may sound a bit trivial, but I'm using an old low capacity SD card (64MB !) for just having the driver stored there.
After a hard reset I would first use this SD card to install the driver, then using my (standard) HCSD.
SDHC driver
Yes, that's what I'm doing too (low capacity SD with important system files).
But anyhow, is there a method to "burn" a driver into the existitng WM 6 ROM of N560?
Thanks
Bettet solution
I managed to store the SDHC driver file (some 32KB) on my mobile phone memory (internal od memory card). Then by connecting via Bluetooth's file transfer profile, I can transfer the driver to my Hard Reseted N560 and continue from there. No need to carry an additional SD card (which can get lost easily), no need to access a PC and my phone is always with me.
Thanks for this it is fantastic my N560 is finaly working with HC card and Wifi is on THANKS:
Thanks ! it was the ultimate improvement I was waiting for on my loox...