Related
Now i am transrating all of exe and dll files to Jpanese for my Blue Angel.
But most of them can't read and copy to PC from ROM due to locked.
Anybody can do that?
Of course i tried to use many tools from Xda developers com, but still not succeed it.
Pls let me know how to do, or up load all of the exe/dll files(the best is the Chinese WM2003 Phone, because easy to edit chinese one to jpananese, the chalactors of japanese and chinese have very near width of each dialoge. English alsp welocme!)
You can find my work here(japanese only) http://asukal.seesaa.net/article/1486286.html
Transrated [Backlight controle panel] to jpanaese
Asukal said:
Now i am transrating all of exe and dll files to Jpanese for my Blue Angel.
But most of them can't read and copy to PC from ROM due to locked.
Anybody can do that?
Of course i tried to use many tools from Xda developers com, but still not succeed it.
Pls let me know how to do, or up load all of the exe/dll files(the best is the Chinese WM2003 Phone, because easy to edit chinese one to jpananese, the chalactors of japanese and chinese have very near width of each dialoge. English alsp welocme!)
Click to expand...
Click to collapse
I suppose you need to build the ROM, using modified DLLs and EXEs. If the files are XIP and in ROM, you can't just copy it out from your /Windows.
Even if you managed to copy the files from a DUMPROM of a Blue Angel installation ROM, it is not permanent. When you perform a hard reset, your copied files will be gone.
Hi Asukal,
all you need to translate are the .mui files. Don't mess with .exe or .dll files directly.
Search the Micro$oft site how MUI works on WM2003.
Check out this thread here: http://forum.xda-developers.com/viewtopic.php?t=13714
Good luck
buzz
thanks guys!
to henrylim>>
yes i knew it will be gone after hard reset.
so i am planning to make Original Japanese ROM afer all of exe/dll were modified. but it will be long way to compliete!!! how many exe/dll must be edited!!!
but now i need all of exe/dll s from ROM at the first step!!
to Buzz_lightyear>>
i tried to modefied MUI and also did it exe/dll direcly and rename MUI, both can be works<seems to be worked>>
Any way, check the thread you mention and study more! thanks!
---------------2006/May31 Updated---------------------------------------
------------------------------------------------------------------------------
＠繁体字OS
Traditional Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHS130.rar
＠簡体字OS
Simplized Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHT_130.rar
PLS use Extrom files which are in above archives to run correctly
See the detaile on next page and use as your own risk!
----------------------------------------------------------------------------
----------------Previouse POST-----No More following ROM----------
it took 2 hours to upload!!!!
http://www.asukal.jp/123/imate13_CHT.rar__65MB
Traditional Chinese130764 Universal
@Upgrade_Utililty.zip
*nk.nbf was my edited ROM of i-mate "JASJAR_WWE_13076_164_10900_wwe_ship" with
the wince.nls and Tarisk Font, enable to encode Japanese/S&T Chinese/Korean/Thailand.
(80% of its interface is Traditional Chinese)
*Radio.nbf and ms_.nbf are not included. pls dl offical one to flash.
*use MaUpgradeUt_noID.exe to make Falsh the ROM.
suggest to connect PC with "Sireal mode" = Light button + Power button +Stylus.
------------------------------------------------------------------
***The Templates.zip and Extrom_Unhider.cab---and Asukal.cab
@while first boot from Flasing ROM, some letters are not discribed correctly,
Such like a ????????. do not care.
@The Doctor Johnson screen to aline the stylus will be come every time after soft reset.
Please delete the short cut of "Welcome.exe" in the \windows\StartUp folder.
No more Dr,Johnson.
@using a Pocket Word, to make New Documents, you will find the error.
You make the "Templates" folder in My Documents with Chines Folder name.
The place the all templates in this archive.
No more error.
@Asukal.cab.==pls install this after finish 1st reboot from installation of Extended ROM files.
Then make soft reset again.
@Extrom_Unhider.cab is to unhide the Extended ROM.
Old Unlocker is not work, just install this cab and make soft reset,
ExtROM will visuable and workable.
http://forum.xda-developers.com/viewtopic.php?p=240986&sid=9e9c8acfa34bb46c11688318be09adb4#240986
Thanks for Mr.sef
Still not perfect and sometimes hang up if you toggle the Today Plug-in.
Pls try as your won risk.
If you feel so bad coz of the OS is not stable, pls use without Asukal.cab.
Less Chinese Interface, but more stable.
or make disable the Device Lock on the Today Screen.
Good Luck
Thanks again for the great word....
Actually I prefer to use English OS interface with the ability to read chinese only.....(I think it should be easiler to build??)
But this one is ok as I didn't install your cab file.
Thanks a lot.
Cheers,
Thanks again , will try today
CJK+Thai wince.nls and font in New I-mate ROM1.3
this is the new one only wince.nls and font, also font registry.
http://www.asukal.jp/123/v13enROM_CJK.rar 65MB
radio.nbf and ms_.nbf for Extended ROM, are not included)
PLS try, so nice! i hope...
1st one i uploaded, if you use Asukal.cab, the more mui can work.
those mui were made from old WM5, so they are not match well with
new os.
for example, thres.dll, old version dll doesnt have "Device Lock",
But new thres.dll have it, so if you use Device Lock on Today, OS will hang up.
Many of dll are different from OLD WM5, i suggest this rom only use for
test.(but without using asukal.cab, not so bad)
Good luck!
The first one after flush look great but install Asukal.cab the today plugin
will be stop try to reset can't be done.
try to install Sino_SIP_No5.zip to hand write , don't work please advise ,
also Monster SIP can't use either , I will text tomorrow and give you freeback
the default chinese input method from dopod 900?
hi asukal,
can you include the chinese input method from dopod 900 to the wwe rom devices?
need it very much!
hanks
Parker
[email protected]
ya, i have found many difference in dll between previouse and new ROM.
so some of mui is not compartible.
i found after made this 1st rom
so i suggest do not use asukal.cab pls, or use 2nd rom.
now i making new mui with dll from new rom.
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
i am willing to get it for you!
but how?
can you tell me how to do it?
thanks!
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Dopod_files.rar
mwang said:
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Click to expand...
Click to collapse
Excuse me,Would you tell me how to use the Dopod files.rar?
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Asukal said:
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
Please pm to me how to get it ,I will doing tonight
Dumping chinese ROM
Asukal said:
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
That's a great message, I'm waiting your dumper,and tell me how to return to Universal.
Thanks
How to solve inputing Chinese?
How to solve inputing Chinese?
Ce-star or system itself
No SIP for chines in it now.
you must install your favorite SIP.
to get the registry, use TRE (Tascal registry editor and export registry on device,
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
T-Mobile English ROM Bluetooth StereoHead set Profile
Today, the new rom of T-Mobile WWEnglish ROM with A2DP was uploaded.
i injected wince.nls and fonts which can be supported CJK+Thai in that.
uploaded here<no Chinese SIP and Interface,Just encode & font support>
http://www.asukal.jp/123/T-Mobile_A2DP.rar 52MB with MaUpgradeutlity.exe
see the captured screen shots.
http://asukal.seesaa.net/article/14749754.html
<no radio.nbf and ms_nbf were included. you have to dl from
http://forum.xda-developers.com/viewtopic.php?p=246434#246434
or
UNI_TMUK_12032_120_10600_Ship.exe
ROM version 1.20 lower than i-mate 1.30_AKU2
Thanks a lot again. I want the A2DP!!!! Yeah.
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
ya, i got it.
but it is not sure it can work or not
must check all regostry one by one.
i tried in my passed, still not good result.
any way, pls wait with long sight!
now i must make many kinds of rom for Japanese guys,
also trying to Get A2DP to i-mate ROM(very low possiblety to get)
also make new mui interface for AUK2,
also have to have a dinner!
also have to ,,,,,,
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
i am checking all registry from you.
question, i have found following value.
Is the "HanWang" one of OS SIP, or 3rd parties one installed by you?
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang]
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang\HangWang Pen for WinCE]
"Study"="0"
"Sound on"="1"
"Screen segment"="1"
"Default input panel"="0"
"Ink speed"="10"
"Ink width"="1"
"Ink color"="0"
"Ink type"="2"
"Recognizer delay"="400"
"Recognizer range"="600E"
Wait for your rplay.
DEPRECATED VERSION: USE 0.2 BETA INSTEAD
PLEASE NOTICE THAT THIS KITCHEN IS A VERY EARLY BETA AS IT HAS NOT BEEN DEEPLY TESTED
*** USE IT AT YOUR OWN RISK! I ASSUME NO RESPONSIBILITY! ***
Hi guys,
after many days of testing I'm releasing my kitchen for i780.
It is very basic: no gui, only batch Windows scripts.
What you can do with this kitchen:
A) Convert your Part02.raw dumped rom to bin flashable PDA rom
B) Create a dump folder to cook your own rom and recreate a bin flashable PDA file.
Please notice that there's no tool included to edit, add or delete modules and files from rom dump.
You must use one of the tools available here in forum to do this or do this by hand.
Donwload the zip file and extract everything.
READ CAREFULLY THE README FILE IN THE ZIP ARCHIVE
This file explains how the procedures work and what you need.
PLEASE TEST THIS KITCHEN AND REPORT YOUR RESULTS
I thank chaimd for his bintonb0 tool, tadzio for his tools and Juggler for conv3 sourcecode.
I also thank Topogigi for his original procedure.
I modified conv3 tool to make it work with i780 rom files and made split and merge tools.
If you want to try this kitchen, I thank you!
[FONT="]If any guru in the forum wants to make a gui for this kitchen or insert tools for module, file and registry editing (like the ones you can find in other kitchens), it would be appreciated.[/FONT]
Issue 1: it seems there's a problem with Part02.raw conversion. It screws up connection settings. Problem is being investigated.
[Partial solution]: it seems that this problem is due to both size and language: I used an English rom to convert an Italian Part02.raw.
Using an Italian rom seems to solve the problem. But you must check the new rom size: if it's too big it gets cut down and it doesn't work.
Amazing Thank you very much!
inertiax3 said:
Amazing Thank you very much!
Click to expand...
Click to collapse
wheres the download link ?
Everything's online now!
Have a good time and let me know!
Thank you very much
And is it possible to use it for create a .bin flashable phone rom ?
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Thanks famucs i have tried your procedure.
It's all ok but i nedd to split i780_XIHA7_Rev12.img in tree part loader, pda and phone.
Can You help me?
sorry for my terrible english.
tatoone said:
Thanks famucs i have tried your procedure.
It's all ok but i nedd to split i780_XIHA7_Rev12.img in tree part loader, pda and phone.
Can You help me?
sorry for my terrible english.
Click to expand...
Click to collapse
thats easy .. heres how to do it
fire up mirage on ur pc and chose the eboot+phone+pda option and select ur file ..
then dont connect the samsung to pc.. instead use file explorer on pc nd go to c and copy the three files to some other folder.. cancel the mirage on pc then
ruffruff said:
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Click to expand...
Click to collapse
i was thinking the same thing.. ? if you try let me know too !
zohaer21 said:
i was thinking the same thing.. ? if you try let me know too !
Click to expand...
Click to collapse
I love your footer about the 8502 being a mistake. I also own one. what a dissappointing and relatively useless machine it is, and I can't find a buyer...
I have tried with dump of HC1 italian but I have more problems.
The more little is the desappear of office folder but most important is the deseppear of remote connection e wifi connection.
tatoone said:
I have tried with dump of HC1 italian but I have more problems.
The more little is the desappear of office folder but most important is the deseppear of remote connection e wifi connection.
Click to expand...
Click to collapse
That's interesting:
can you tell me exactly what rom did you use as a base?
ruffruff said:
sorry for a noobie question.
with this kitchen, can i cook a wm6.1 by replace all the wm6 files with wm6.1 files?
Click to expand...
Click to collapse
Don't think you can.
In another thread, people were talking about a xip part needed to switch from wm6 to wm6.1
famusc said:
That's interesting:
can you tell me exactly what rom did you use as a base?
Click to expand...
Click to collapse
I have the the loader and the phone of i780DXHC4 english.
I have processed a dump of italian rom version i780XIHC1 with yor software.
Peraphs the dump of italian rom is broken??
tatoone said:
I have the the loader and the phone of i780DXHC4 english.
I have processed a dump of italian rom version i780XIHC1 with yor software.
Peraphs the dump of italian rom is broken??
Click to expand...
Click to collapse
No, I think there's a problem with payload update.
Thanks i will try it
where to get the part02.raw from ? i wanna work with dh4 rom ?
thanks
Convert Part02.raw to .bin
Hello famusc,
Thanks for your effort to create a kitchen for the i780! I wanted to create a backup of my Dutch i780-rom (PDA: i780XKHA3) and I managed to dump part00.raw, part01.raw and part02.raw.
Now I wanted to convert part02.raw to a flashable .bin file so I could reflash this Dutch rom if I want to go back to factory defaults, but the warnings make me a bit scary to test the .bin I created, so I wanted to ask some questions first:
-The .bin has to be as large as possible, I have the i780pda_WWE_test2.bin which is 78.512 kB and my Part02.raw is 79.104 kB. The .bin I get when the conversion is finished has a size of 78.512 kB. Does this mean some data of my original dump is lost? (I kinda understand your conversion tool replaces the part02.raw file of a flashable .bin rom with another part02.raw which in my case is the Dutch part., but is all the information still in it?)
-My second question is if it is a problem if I used an English .bin with a Dutch .raw?
If you could please anwer my questions I would be very happy, because I have seen some requests for Dutch i780 roms and it might come in handy for other languages, because in this rom Windows Live Messenger is included (and obviously working). So maybe someone can extract it.
If you are interested I could upload the .raw files i have dumped and maybe you or someone else can create a flashable Dutch rom from it (or extract WLM if it is needed).
Grtz,
Manchurian
Manchurian said:
Hello famusc,
Thanks for your effort to create a kitchen for the i780! I wanted to create a backup of my Dutch i780-rom (PDA: i780XKHA3) and I managed to dump part00.raw, part01.raw and part02.raw.
Now I wanted to convert part02.raw to a flashable .bin file so I could reflash this Dutch rom if I want to go back to factory defaults, but the warnings make me a bit scary to test the .bin I created, so I wanted to ask some questions first:
-The .bin has to be as large as possible, I have the i780pda_WWE_test2.bin which is 78.512 kB and my Part02.raw is 79.104 kB. The .bin I get when the conversion is finished has a size of 78.512 kB. Does this mean some data of my original dump is lost? (I kinda understand your conversion tool replaces the part02.raw file of a flashable .bin rom with another part02.raw which in my case is the Dutch part., but is all the information still in it?)
-My second question is if it is a problem if I used an English .bin with a Dutch .raw?
If you could please anwer my questions I would be very happy, because I have seen some requests for Dutch i780 roms and it might come in handy for other languages, because in this rom Windows Live Messenger is included (and obviously working). So maybe someone can extract it.
If you are interested I could upload the .raw files i have dumped and maybe you or someone else can create a flashable Dutch rom from it (or extract WLM if it is needed).
Grtz,
Manchurian
Click to expand...
Click to collapse
Thank you for using my kitchen.
First of all I ask you to use version 0.2 BETA: it contains some important corrections in conv3 tool.
Now:
1) Part02.raw is usually bigger than required. So we are interested into its shrinked size. I think that your 78512K bin file should be good.
In 0.2 kitchen it is explained how to check bin size is enough for new data.
2) It's not clear whether you'll have problem with a bin of a different language than raw file. As for my experience, I always got connection problem when I used a different language bin. You can try and then have a look at connection settings and at wifi Internet-Work settings. If you find no connection defined or you can't connect through wifi, than it doesn't work.
You should use a Dutch bin to be sure you'll have no problem.
Hope I helped you,
Bye
Hi, Thank You for your I780 Kitchen ,
this is first time i build a rom,
may i know that where can i found the file
part02.raw?
Thank You for reply =)
Hi all,
Alex2003 has turned the Italian original keyboard to Hebrew for the Diamond.
I tried it on the HD and it works great. Link below:
http://forum.xda-developers.com/showthread.php?t=469061
However, the Hebrew works only in portrait mode. It goes back to Italian in Landscape..
Can anyone help with fixing this?
Thanks
For the landscape keyboard look at this thread message #401 : http://forum.xda-developers.com/showthread.php?p=3200612#post3200612
i tried to copy the TXT file that should fix the landscape KB,
but i cant...
i get an error message:
"cant copy LQwerty0c10: Access is denied.
make sure your mobile device ha sufficient memory, that the file is not read only, and the you have permission to copy this file type"
how can i copy it anyway?
hi,
you have to use total commander or resco explorer or such to overwrite rom files...
anyway i'll add these text files to the current cab and post a modified version later tonight.
question: does it still say "Italian" after installing this cab or does it change to "Hebrew"?
thanks!
it still says "Italian"
THANKS!!! You guys ROCK!!!
Works Perfect!! Better than SPB Keyboard..
Ok guys (& gals), as promised, I modified the Alex cab to include the HD-specific files (arrow-keys and landscape mode).
Unfortunately I can't test it because I already installed the keyboard with the manual-copy approach and don't feel like hard-resetting right now.
I don't see any reason why it wouldn't work because I only replaced one file and added another. But still, I shall repeat the usual mantra:
Use at your own risk! I am not to be held responsible in case it doesn't work, bricks your device, or brings the end of the world as we know it (in a negative way)
That said, I'd be happy if you test it and post your results.
Oh, and if anyone could help out in making the menu say "Hebrew" instead of "Italian" I'd be most grateful as I do appreciate aesthetics (yeke ma la'asot )
Cheers!
hi ,its working for me very good keyboard-hd+landscape.cab do u know if it will work on a palm pro 2
thanks! it works!
does anyone have the links he uploaded for WM 6.1 ??
Hello All.
Here is the package that I used to read traditional and simple chinese in my
Touch Pro 2.
These are the best font and size that I find works the best for my TP2 using
WM6.1.
Instructions are in the attachment.
Enjoy.
http://rapidshare.com/files/274928187/TP2_Chinese.rar
thanks for sharing,do you have one for wm 6.5????
This one will also work for WM6.5
integrate into registry????
I would like to install this font also...can you explain what you meant by integrate into registry or paste an example. Sorry for my elementary question...I am still new at this. Thanks in advance for your help.
Can anyone verify if this works? Tired of seeing little squares in MSN Messenger!
OMG! Thank you so much! I've been searching for an easy way to get Chinese font on my TP2. This works great. My Chinese and Japanese MP3's are now readable. No more square "text".
Would you happen to know a solution for Korean font?
I just noticed that my date/time is now in Chinese. Is there a way to keep that in english?
I assume the cab is making the necessary fontlink and registry changes to switch the system font.
Newbie here so please bear with me if my question seems off but I've been reading here and google for the past few hours and still couldn't figure out on the installation instruction.
Here's the installation instruction from the download folder:
1. Copy wince.nls into /windows Directory.
2. Install Chinese Cab, Do Not Restart
3. Integrate the registry file
4. Restart.
I have installed SPL and copied the #1 wince.nls file into the windows directory but am now completely lost on #2 as there's no .cab file from the download folder?
About #3, how do you integrate the registry file?
Thanks in advance.
Yeap... how to integrate the registry? Btw, i can read and type chinese in notepad or sms. but, when i view something like bible or facebook application, the fonts become "square box with a question mark" inside? Any help?