Maybe I am missing something here. I used to use the DUN with my 8525 and never had a problem with my laptop. I flashed today with XDA .20 and can not figure out how to work the new PAN. I tried everything and just can not get it to work. Am I missing something?
Use the internet sharing app. If you are tethering via USB make sure to disable bluetooth or your device won't get a DHCP lease from the PAN driver.
I have a problem connect Via bluetooth using Internet Sharing with all version of WM6. When pair with the PC, the PC can only transfer file with my 8525 only. But when using Cingular 3.3 aku my PC can find Serial port profile and connect to Internet Sharing.
Does anyone know a registry fix for this?, I am using a Sony laptop with build in toshiba bluetooth stack. When went back to 3.3 aku internet sharing Via bluetooth work again.
Thanks
tandao said:
I have a problem connect Via bluetooth using Internet Sharing with all version of WM6. When pair with the PC, the PC can only transfer file with my 8525 only. But when using Cingular 3.3 aku my PC can find Serial port profile and connect to Internet Sharing.
Does anyone know a registry fix for this?, I am using a Sony laptop with build in toshiba bluetooth stack. When went back to 3.3 aku internet sharing Via bluetooth work again.
Thanks
Click to expand...
Click to collapse
Now I dont feel so bad - this is exactly what is happening to me.
bluetooth PAN does NOT works with toshiba stack! upgrade your laptop to Vista and don't install toshiba stack! Vista (microsoft) stack works!
netnerd said:
bluetooth PAN does NOT works with toshiba stack! upgrade your laptop to Vista and don't install toshiba stack! Vista (microsoft) stack works!
Click to expand...
Click to collapse
I have vista and winxp with toshiba stack on the same laptop (dual boot), both doesn't work with all version of WM6 available here, but it work with 3.3 aku cingular rom.
Where can I find MS stack? when I unintalled toshiba stack, all the driver for the bluetooth is gone.
Edit: Thanks for the tips, I finally get it to work VIA bluetooth, the problem is the toshiba bluetooth stack. I uninstalled the toshiba stack, and do and manually driver installed and choose Toshiba as the manufacture, and intergrate bluetooth, Vista find a driver for it and activate the MS stack.
The issue with the Toshiba stack is this:
The auto discovery is the only way to set up services. However, the PAN service doesn't display unless the devices are paired. Toshiba can only Pair with devices seen during discovery....
Its a damn catch-22....
Sleuth255 said:
The issue with the Toshiba stack is this:
The auto discovery is the only way to set up services. However, the PAN service doesn't display unless the devices are paired. Toshiba can only Pair with devices seen during discovery....
Its a damn catch-22....
Click to expand...
Click to collapse
screw the toshiba stack! just dont install that junk, Vista will automally install Microsoft bluetooth stack!
Can someone please detail the steps on how to get Internet Sharing via bluetooth for either XP or vista?
TIA!
Interestingly, there's a help topic in WM6 that explains this! Tap Start->help and then choose "search"
Now search for "Internet sharing". How to set up the m$ bt stack on your desktop is explained there.
M$ stack
I just have the same prob. on my laptop with XP SP2 and toshiba BT stack...
how can i fix the drivers for M$ BT stack without install VISTA ???
THX in advance
vdavide
Since upgrading to WM6 Black, I can't seem to get the Wireless Modem (internet sharing) to work. I am using a USB cable but when I start the DUN on the PC, it says there is no modem installed.
found the answer elsewhere - if you are using USB turn off BT on the device!
obvious really (?)
replacing Toshiba BT stack with Microsoft
Hey, I cant vouch for this since i dont have a toshiba but thought i might pass this on. hope it helps.
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=841048
Is there any way to use old wmodem from WM5 on WM6. I have public ip and im afraid that using Internet Sharing make that i will be behind nat? If i think correctly? /dont have wm6 on hermes/
warmkiwi99 said:
Since upgrading to WM6 Black, I can't seem to get the Wireless Modem (internet sharing) to work. I am using a USB cable but when I start the DUN on the PC, it says there is no modem installed.
Click to expand...
Click to collapse
Hey bud, Microsoft ditched DUN in WM6. If you have the drivers installed properly (included with Activesync 4.5) you should see a new LAN connection in your Network Connections. In Windows XP it should be described as "Windows Mobile-based Internet Sharing Device" If you don't have the driver installed you will see Generic RNDIS in your Device Manager. From what i understand if you have Vista installed on your computer these drivers come stock (on the Final full version of Vista, not included by default on RC1, not sure about RC2)
hope this helps...
PAN with toshiba stack
I downloaded an updated bluetooth stack from
http://aps.toshiba-tro.de/bluetooth/pages/download.php
and it worked fine.
Pair hermes with computer. First turn on internetsharing then connect using pan profile.
TheLuggs said:
I downloaded an updated bluetooth stack from
http://aps.toshiba-tro.de/bluetooth/pages/download.php
and it worked fine.
Pair hermes with computer. First turn on internetsharing then connect using pan profile.
Click to expand...
Click to collapse
... mmm interesting ... wich version of toshiba stack you used ? and wich version of WM6 on your device ?
I tried the very latest version of toshiba stack with LVSW first WM6 version but doesn't work .... only the M$ stack work ( fine too ).
Bye
vdavide
vdavide said:
... mmm interesting ... wich version of toshiba stack you used ? and wich version of WM6 on your device ?
I tried the very latest version of toshiba stack with LVSW first WM6 version but doesn't work .... only the M$ stack work ( fine too ).
Bye
vdavide
Click to expand...
Click to collapse
Bluetooth stack:
v5.10.06
bluetooth spec:
2.0,1.2,1.1
with jasjamming's WM6 Black 2.0
works like a charm, couldn't get it to work wit the older toshiba stack supplied by asus (3.03.04)
TheLuggs said:
Bluetooth stack:
v5.10.06
bluetooth spec:
2.0,1.2,1.1
with jasjamming's WM6 Black 2.0
works like a charm, couldn't get it to work wit the older toshiba stack supplied by asus (3.03.04)
Click to expand...
Click to collapse
i tried the v 5.10.06 too on my asus but still can't connect to my tytn WM6 LVSW first release .... maybe the different WM6 is the key of this problem...
wich options u use in the toshiba stack ( security level and so on ) ?
i tried high security level that force pairing with device ( and obviously pan enabled) but still get the message " only file tranfer service on the device ..."
i'm interested to get it to work too also if it's working now with m$ stack .
There may be some other users interested too...
THX
vdavide
[email protected]
i have a t-mobile mda3 Compact with PDAViet Black&Blue V3...
since i upgraded from WM5 to WM6 i can not sync to my PC over bluetooth..
can anyone with wm6 try this? maybe im only to stupid...
if it works.. pls tell me how...
thanks
Works just like it always did. Switched Bluetooth Radio on, started ActiveSync on my XDA and selected "Connect via Bluetooth" it than searched new Bluetooth Devices, found my Notebook with ActiveSync Service enabled and synced. Exactly the same as it was with WM5
doesnt work =(
that does not work for me... the following happens:
I enable bluetooth... open active sync and select connect via bluetooth...
A window pops up witch says : There is no Bluetooth Relationship with an ActiveSync enabled PC. Would you create a relationship.
If i click on Yes i get to the Bluetooth settings tab were i can enable / disable bluetooth.
If i create the bluetooth partnership myself, the same happens in Active Sync...
any ideas?? pls help me... i really need this.
Its workin now... had to create an incoming comport for bluetooth on my pc and activate it in active sync
Fracoon said:
Its workin now... had to create an incoming comport for bluetooth on my pc and activate it in active sync
Click to expand...
Click to collapse
Could you please explain to me more slowly I am sorry I am noob, I have the same problem
Finaly the problem solved. You are right it is because of incoming port. But another reason why in the begginning I don't know your statement about incoming port is because the application and the driver of my Bluetooh donggle which come with the device has different user interface. No incoming port is stated there . When I delete this driver and use the driver which includes from window XP, and try to pair it again, everything solved.
Thank for the information
hi all..
I downloaded Missing Sync 4 for Mac and installed. Then upgraded my Tytn to WM6.
Now I'd like to sync all my contacts and to do with my mac, but I can't. the system can't see the phone both with USB connection and Bluetooth (while connected with cable the Tytn recharge correctly, with Bluetooth I can send files between the two. so seems there are no problem..)
can someone help me?
tks a lot..
http://forums.markspace.com/viewtopic.php?t=533
read this! then i should work. i have schaps3.60 and it works perfect for me.
regards chief
Yeah, try that. I have MBP (Intel), WM6 Black X, 8525 - working fine with Missing Sync 4.0
i know there are tons of forms on this already but ive read through them all and cant figure it out i was woundering if some one could dumb it down for me. im having the problem where bluetooth pan will conect and say connected on my lap top and my hermes but then ie can not use the conncection.
usb connection works just fine.
the hermes is running windows mobile 6
laptop is vista
widcomm bluetooth stack from the cd that came with my kensington bluetooth dongle
ive heard the solution is a diffrent bluetooth stack but i tired installing blue soleil and it crashed the laptop in to a blue screen. i tried tobisha and it couldnt recqonice the dongle.
any help is much appreciated thank you
fb.knight said:
i know there are tons of forms on this already but ive read through them all and cant figure it out i was woundering if some one could dumb it down for me. im having the problem where bluetooth pan will conect and say connected on my lap top and my hermes but then ie can not use the conncection.
usb connection works just fine.
the hermes is running windows mobile 6
laptop is vista
widcomm bluetooth stack from the cd that came with my kensington bluetooth dongle
ive heard the solution is a diffrent bluetooth stack but i tired installing blue soleil and it crashed the laptop in to a blue screen. i tried tobisha and it couldnt recqonice the dongle.
any help is much appreciated thank you
Click to expand...
Click to collapse
try to use static ip adress
im not sure how to set that up could you walk me through it
I think the problem is that your dongle needs to be able to use the MS Vista stack. I had a similar problem and had to change my dongle in the end, luckily they were cheaper but I had to make sure if worked with the native Windows drivers.
Wam7 said:
I think the problem is that your dongle needs to be able to use the MS Vista stack. I had a similar problem and had to change my dongle in the end, luckily they were cheaper but I had to make sure if worked with the native Windows drivers.
Click to expand...
Click to collapse
ok im open to that what dongle did you use? and did it come with the right bluetooth stack what one do you use?
edit: k so i was just looking and your saying the bluetooth stack is built in to vista right? i was found it and it dose not seem to see my dongle
Hey guys,
I'm sorry if this question has already been posted, but I searched and couldn't find anything.
My question is this, I have a NOkia E65 with a Navigator application, and I wanted to use my HTC P3300 as an External GPS via Bluetooth. Is that possible to do ? I've been fiddling around with the GPSGate app, but so far no such luck.
Thanks for your help
How far do you get through the set-up guide on this page http://franson.com/forum/topic.asp?TOPIC_ID=3968
It works fine on my Artemis - Mike
Hi,
I was able to get it working through Activesync. At first connect your computer through activesync via Bluetooth. Then configure your GPSgate to connect through Activesync, then you can see your Artemis is now able to work as a external GPS receiver.