Develop Bugs

Help with getting an update to work on Qtec 9090

Hi guys. Got a problem:-
1. My xda3 is stuck in bootmode
2. I have tried various updates, but all say country code error
3. I have tried the various .bat files using xda3nbftool, but no joy - still says country code error
4. How do i find out what code i am running off, so i can trick the updates, using xda3nbftool?
5. It is an unlocked one, from abroad (don't know which country - but it was a wwe edition.
6. PLEASE HELP ;-(

All done guys, thanks to all the help from this forum - YOU ARE ALL GODS
God damn - it's twice as quick now, and bluetooth even works - wonders will never cease
Cheers, Ronnie ;-)

RonnyBarlow said:
All done guys, thanks to all the help from this forum - YOU ARE ALL GODS
God damn - it's twice as quick now, and bluetooth even works - wonders will never cease
Cheers, Ronnie ;-)
Click to expand...
Click to collapse
Great News I was in the same position as yours, and Buzz help me to recover my XDA.

and what was the solution ?
What was the solution, because my qtek is also stuck in serial mode.
And i don't find a french rom to do an update. (Country error with english rom)
thanks

help needed
me too is suffering the same problems
my blueangel mdaIII type PH20B keeps showing
serial
v 2.05
i tried a lot of things , but nothing worked.
i am hoping on your help guys
i get only the bootload modus........
:~(

Help?!
I'm also stuck with a broken XDA3/QTEK9090!
Anyone??

I'm trying to do my PDA2K for the U.S. carriers,and can not get past the country code error.....HELP........
RonnyBarlow said:
All done guys, thanks to all the help from this forum - YOU ARE ALL GODS
God damn - it's twice as quick now, and bluetooth even works - wonders will never cease
Cheers, Ronnie ;-)
Click to expand...
Click to collapse

XDA II from Austria

I bought an XDA II over Ebay.
Super deal, Everything cool.
Then, **** SIMLOCK!!!
I worked my way around that (would love to get rid of it).
Here is my problem,
The XDA II has the software on it from Austria. It's ok (German) but i would very much like to use the original O2 Germany Software.
I downloaded the O2 Update from the website. Installed it an got:
Error 120 Country ID Error!
Can someone please assist me in resolving this issue.
Do I Need a ROM? Were might i get it? How can i get the right software on it for my land.
Is there another version (tuning) out there better than the service partner version?
Please help me!!!!
Tim

Shadoe said:
I bought an XDA II over Ebay.
Super deal, Everything cool.
Then, **** SIMLOCK!!!
I worked my way around that (would love to get rid of it).
Here is my problem,
The XDA II has the software on it from Austria. It's ok (German) but i would very much like to use the original O2 Germany Software.
I downloaded the O2 Update from the website. Installed it an got:
Error 120 Country ID Error!
Can someone please assist me in resolving this issue.
Do I Need a ROM? Were might i get it? How can i get the right software on it for my land.
Is there another version (tuning) out there better than the service partner version?
Please help me!!!!
Tim
Click to expand...
Click to collapse
Download "WM 2003 ROM Image Editor", install it, run it, open your downloaded ROM, change operator and enjoy! :lol:

Sergio_Bandeira said:
Shadoe said:
I bought an XDA II over Ebay.
Super deal, Everything cool.
Then, **** SIMLOCK!!!
I worked my way around that (would love to get rid of it).
Here is my problem,
The XDA II has the software on it from Austria. It's ok (German) but i would very much like to use the original O2 Germany Software.
I downloaded the O2 Update from the website. Installed it an got:
Error 120 Country ID Error!
Can someone please assist me in resolving this issue.
Do I Need a ROM? Were might i get it? How can i get the right software on it for my land.
Is there another version (tuning) out there better than the service partner version?
Please help me!!!!
Tim
Click to expand...
Click to collapse
Download "WM 2003 ROM Image Editor", install it, run it, open your downloaded ROM, change operator and enjoy! :lol:
Click to expand...
Click to collapse
thanks. i found a way last night to change the op code. it was not easy, but i coul install the other version. IS the simlock now gone?
tim

XDA OIIi ROM Upgrade

Hello,
Can you tell me how to upgrade my XDA O2i Rom.
I tried English one (Xda_IIi_Upgrade_v111171.exe) it says Country ID Error.
I tried Himalaya (HimaUpgradeUt.exe) it says there is an error occured if default.
This is a handheld of General Director Of our Corporation Bought by me in Russia. It shows Black screen now I have make it working before it is possible
i tried Taiwan they dont pass me to download page because of my IMEI.
What to do?
Help me please!

For your information, XDA IIi also known as HTC Alpine! You can check at Alpine section for any kind of help! About the upgrading ROM, checkout at this link! It was under Alpine Upgrading etc. section
http://forum.xda-developers.com/showthread.php?t=258480
Thanks

HTC S620 WM5 to TMO WM6

Hey everyone,
I've got the HTC-S620. Unlocked from IMEI Check.co.uk so it is CID and SIM unlocked and i still cannot upgrade to the TMO WM6 rom.
The only roms I can use are the original HTC Excalibur WM5 rom or the TMO Wm5 Dash rom and i can go between the two. I cannot use any other rom while in either of the ones i mentioned which work.
Every single time i go to do a rom update it gives me the same error.
Error [244]: Invalid Model ID
This update utility cannot be used for your phone. Please check the update utility.
N-NpOrvjOufp-T.ORF577-EYED55670
Click 'Exit' to quit.
Any suggestions???
-Jas

read post #5 here:
http://forum.xda-developers.com/showthread.php?t=312963

been there tried all that. nothing works lol

did you flash the bootloader to 1.11 like it says?

it will not let me...the only roms it lets me update with are either the HTC 620 rom or the TMO WM5 rom. nothing else works, not the bootloader nor the TMO wm6

Hi
I had the same problem last night but found that following this info got it working for me.http://forum.xda-developers.com/showpost.php?p=1282882&postcount=2
Nothing else would get it working as you always get the vendor id error.
Chris

I recently did this method on a canadian Rodgers S620:
http://forum.xda-developers.com/showthread.php?t=312963
And this method on a European HTC S620:
http://forum.xda-developers.com/showpost.php?p=1282882&postcount=2
However I don't know if each method works on the other device. The first one is easier, but be sure to flash the bootloader like it says and you should see a black backround with red text when you boot. Once you see that you know its ready to take the WM6 rom.

i tried that and IT WORKED!!!! THX EVERYONE!!! =D woohoo WM6 =D

jmonga said:
been there tried all that. nothing works lol
Click to expand...
Click to collapse
funny how in post #2 "indiekiduk" pointed you to the same info ..
yet here you claimed "not work" ... and further down ( post #8 ) ... it ended up working ...
my thought ?? 90% of the time it is USER ERROR ( not reading properly !! )

jmonga said:
i tried that and IT WORKED!!!! THX EVERYONE!!! =D woohoo WM6 =D
Click to expand...
Click to collapse
Which method did you try? I have same prob................

aye read it. be patient and read it all. we don't like moaning when all the instructions are there

[Q] help needed , mobile network not available on galaxy gio

hye i have galaxy gio , i have problem with mobile network i have tried almost every rom to get rid off this but i didn't got any solution, when i flash new rom stock or custom it recognize my sim card after some time it says mobile network is not available or no service , currently i am using S5660XXKTI_S5660SERKS1_SER_ stock 2.3.6 rom , i have flashed ics rom then i got this problem plzzzz help me out of this

i am using the same rom as you and i dont have any problem and i have flasht ics before.
but i may ask whats is your provider and where you life

What does your IMEI currently show?
Did you try to SIM unlock the phone?
P.S. I got your PM, but this is really something that belongs in a single public thread. Not as a PM to me, certainly not without very detailed information on what you did exactly on your phone.

thanks for reply
my galaxy gio shows this imei currently 356735040648298/03 and i didn't tried sim lock , because my cell not asking me for any code , it says no service for some time it recognize my sim card after that it says no mobile network or no service

got it
now it says network locked when i checked imie after that it says network is locked

same problem appened to me yesterday!! i waiting 1 day and now it work...i don't know why...

Flash new baseband?
Sent from my GT-S5660 using XDA

thanx
thanx for reply but i did not understand what you said can u give me the links for files that i need to flash , it will be more helpfull thanks

but my cell is showing baseband i m using stock 2.3.4 and baseband is s5660MUGKG3 , onlye is asks for network unlock control key when i insert a sim card

Mug3 is a gt-s5660 M ! Baseband
You problably live in canada?
Sent from my GT-S5660 using xda premium

*sigh*
Another case of "you should have RTFM" I guess.
Some dudes with a sorely lacking grasp of English (for the record: like many others here, it's a second language for me) decides it'd be cool to flash a custom ROM...
Hey, all the cool kids are doing it!
Inevitably, something goes wrong. And then I get some awkwardly written PM asking for help, combined with this thread.
No idea of what exactly was done to the phone, only a few telltale symptoms. This is akin to asking a doctor for a diagnosis after coughing over the phone.
Until you can come up with some meaningful information for us to help you, you're on your own.

thanks darkshadow
thanks for your co operation,