I'm sure I've seen a setting that says something like "allow calls when data connected". I'm sure I used to be able to make calls when I had a 3g/hsdpa connection but since upgrading from Black 2.5 to 3.0, it doesn't seem to allow this any more.
Does anyone recognise the setting that I've inaccurately defined?
Unless I'm mistaken, when on a 3G network voice and data co-exist automatically.
What you may be referring to is a ck box when setting up AS to allow an internet connection to for MMS and VOIP.
Yep, That happens to me. I am just waiting for JJ's new rom and see what happens. 2.5 was working great for me but 3.0 amd 3.0.1 both have Bletooth issues and loose Data connections
Thanks to Mr DSL..check this out for all your cingy Needs
New Cingular Data Install cabs for your WM6 ROM
--------------------------------------------------------------------------------
Due to the obvious confusion with data settings and Cingular users I want to get this taken care of. I know theres a .cab floating around for this already but its already know that it doesn't store the username/password sometimes and it also seems to have a problem with some users keeping a exchange connection for whatever reason.
This has went much better then I thought and I would like to give a big thanks shogunmark and wpbear for making the .cabs for all of us to use. Much appreciated
I have at least loaded each of these up on a fresh WM6 ROM and they all seem to work fine so hopefully some more users will test them out.
The first download will load up the default Cingular MediaNet/ My ISP WAP MMS Settings and of course MediaNet will be the default.
The second download will load up The same settings except My ISP WAP will be the default connection instead of MediaNet
The third download is basicly the same as the second one but is for those who have the PDA data plan and want to use isp.cingular/[email protected] instead of wap.cingular/[email protected]
Related
As of a few days ago my EDGE/3G connection stopped connecting. All the settings are correct, even re-entered them manually a few times, still get the 'cannot connect' error, even though signal strength is more than adequate.
Even stranger, however, is when I use a .cab to automatically inject the settings everything works fine for a matter of minutes, then the connection problems resume.
Running CUSTEL's 2.5, problem started a couple weeks after the flash, and the only thing I have installed since is the Palm Threader, which makes no sense that it would be the culprit.
So this is not a WM6 issue correct? Its an issue with you messing up your connection settings... WRONG THREAD
Pardon me, it is not an issue with my settings, as I said in the first post even if I use a Settings Cab to inject them the data connection still quits after a few minutes even if i have not changed any settings. This never happend with WM5 and it is the first time it's happened with WM6, I would take it into a Cingular store, but I'm concerned the reps would see WM6 and just nullify any support.
Need more info to diagnose. What apps are you experiencing the problem in? Which cingular plan are you on? Which cab did you use to inject the settings.
There is some problem with the lastest wm6 roms for using cingular and pie if you are on the isp plan. Make sure your DNS is hard coded and it will fix it if its the same problem. Seach the forums and like most probs you will find your answer.
connection problems
just to let you know I have been having trouble connecting I connect and then get kicked off I had to use the isp connection settings my friend works for them and he told me it had to do with towers and the cingular and att thing
Edge and 3G
cingy had issues today had the same issue earlier all better now
yeah pure data access seems to be going alright, but for some bizarre reason i can't send/receive email without a synch error (will have to see if this relates to the Palm SMS Threader app though).
thanks guys.
Hi
I flashed the
WM6 Cingular USA version (same as the official but cingular customized and radio version 1.48) thanx madcap180
http://rapidshare.com/files/42972317...T-MR3_Ship.exe last night without any problems. But after that I am having trouble of connecting to internet.
Detais: I was connecting internet at home via my own WIFI router well before I flashed the ROM. But afterwards, I can logon skype, and use check windows updates. However, I cannot use IE to go to any webpage. Also, I cannot logon windows live messager. They just simply resposnes that "The page cannot be dispalyed or downloaded because the connection was lost. check the connection and try again later." But the connection is fine all the time.
Can somebody help?
Thanks
Never mind. fixed. just disable the proxy
I too am on at&t usa and every time I experience problems with internet access I simply hard reset and load the "cingular" settings cab. This way your setting are pre configured and it works everytime. The only other thing I could recommend is checking your connection settings under connections and of course email as well . Beyond this, I dunno maybe try and load another rom.
I am currently using an unlocked Dash flashed with Kavana's latest WM 6.1 rom. As stated in the title I am on the AT&T network. I tried using the connection setup wizard that came with the ROM but got mixed results. I manually entered my previous settings but I am still having issues with my Activesync Exchange Server and MMS messages. Normal web browsing seems to work fine and apps like Google maps work as well.
Can anyone verify the proper settings for the current AT&T Network? I would like to see GPRS, Proxy and MMSC settings. I have seen a lot of older ones that seem to be from Cingular but I can't be sure those will still work.
Thank you in advance for your help.
You seem to be having same trouble i was having
This is what you need to do.
Do the set up network wizard.
Once you have that up. Goto GPRS connection. there a field to where to connect.
For At&T ... choose connect to internet.
for both connection configuration.
I don't have the dash in front of me but i'll post again but in the mean time play with this much knowledge. and i'll try to post up a reply for your question.
Based on previous version i am so happy that there is a connection wizard here i don't have to put in all that crap setting again. all i do is run the wizard and just change the connection settings.
it works all the time.
Thanks for the help. I've messed with it but I still seem to having issues. If you could post what your settings look like I would appreciate it.
I got the Exchange Server to work but I am still having issues with MMS. I get the Error Syncronizing. I've never been able to get them to work since I went to the unlocked Dash.
Weird
My Internet connection was working fine... then I installed Meschle's WM6.1 Touch, which I like very much...
... but I lost the ability to reach the Internet. All my settings are correct for a WAP connection to T-Mobile, I tried it with and without a proxy, I tried changing ports on the proxy... but I keep getting the HTTP ERROR message regardless of what changes I make. It happens on any and all sites.
I know the GPRS connection is made, because after that the browser shows the "locating..connecting..opening" sequence... and then the error.
Help !
same here
this has been happening on my brothers phone for some time. I have tried 3 different roms and 2 tmobile settings as well as the network wizzard. Any fix out there? One rom actually after the setup wizzard let him connect for a few hours now this is back.
first call the T-mobile and ask them if the service is activated for you.
and try to delete all settings and then see this post it may help you
http://forum.xda-developers.com/showthread.php?p=2237367#post2237367
Looking for some help to fix a priority issue when using Widows Live. When i sync with my hotmail account, it automatically creates a GPRS connection even though there is an active Wifi connection, is it possible to change this, as Wifi does not generate any data costs, but using my carriers GPRS connection does. A point of note, this did not occur when using WM5, but has occured using WM6 and WM6.1. Not sure if it relates to the newer operating system, or a newer build of Windows Live. Any help on this issue would be appreciated.
Thanks.
This doesn't occur on the original Hermes WM6 rom. Ive also experienced this issue...
Does your ROM have the HTC Connection Wizard installed? If so, did it setup your GPRS settings for your Cellular service?
What I found is that the HTC Connection Wizard messes with the priority.
What I suggest is backing up your device using SPB Backup or Sprite..
Next, do a Hard Reset
After the Hard Reset, make sure HTC Connection Wizard doesn't run...
Afterwards, setup your GPRS Settings manually.
Now see if your Wifi and GPRS priorities work as you expect it...
If so, you'll have to setup your device again (install software and stuff). If it doesn't work, just restore your backup and you're back where you started.
Good luck
Hey Joel, thanks for the suggestion....I tried it out but still have the same issue. I welcome other suggestions, or work arounds. thanks!
A workaround is to use modaco nodata (do a quick google search for it) which allows you to disable any gprs connections so it will be forced to use wifi, it just uses a toggle box so you can easily re-enable gprs afterwards. I use it with gprs disabled apart from when I really need to use it.
awesome app
not quite what I was looking for, but it does what I need perfectly. Thanks