Hi
I flashed the
WM6 Cingular USA version (same as the official but cingular customized and radio version 1.48) thanx madcap180
http://rapidshare.com/files/42972317...T-MR3_Ship.exe last night without any problems. But after that I am having trouble of connecting to internet.
Detais: I was connecting internet at home via my own WIFI router well before I flashed the ROM. But afterwards, I can logon skype, and use check windows updates. However, I cannot use IE to go to any webpage. Also, I cannot logon windows live messager. They just simply resposnes that "The page cannot be dispalyed or downloaded because the connection was lost. check the connection and try again later." But the connection is fine all the time.
Can somebody help?
Thanks
Never mind. fixed. just disable the proxy
I too am on at&t usa and every time I experience problems with internet access I simply hard reset and load the "cingular" settings cab. This way your setting are pre configured and it works everytime. The only other thing I could recommend is checking your connection settings under connections and of course email as well . Beyond this, I dunno maybe try and load another rom.
Related
Hi guys,
I have a weird problem since a couple of days.
In fact, when I try to use the GPRS, the connection is established however if I try to active sync I get an error message saying that the server can't be reach and if I try in PocketIE to access a website it says also that the server can't be reach.
I check and my connection is up and running. Especially, it was working before, and I didn't change my configuration.
I am using T-Mobile UK Network with T-Mobile Web'n'Walk plan for unlimited data.
Does anybody has any idea?
For your information, I am running the PDAViet Crossbow ROM.
Thank you very much for your help.
Julien
A hard reset had solve the problems. I just hope it doesn't happen again
I am using vp3gs 3.61 rom with windows live messenger version 10.6.0031.2600. no matter what I do it won't connect on my WPA-PSK enabled router. I can connect fine to the internet.
Any special setup I need to do to get it to work?
Thanks for any help.
EDIT
Could someone on ATT disable the phone and use WIFI only and see if you can connect to LIVE?
I am using 10.6.0031.1600(older than yours) but I am able to connect to live services using the wifi with WPA-PSK.
I am using my own cooked rom.
Search in all the forums I remember some people had the simillar issues and had some 'workarounds'
Sorry I do not really remember.
I too also had a problem with .2600, reverted to .1600 and all is good over wifi. By the way, I'm using WPA TKIP on my wifi.
Tried that one too and still get the "there was a problem signing you in to messenger" error after checking internet connectivity.
try these ideas.
1 ensure your wifi settings are to internet and not work
2 ensure you dnt have the ip address set up in exceptions (these ips are only for intranet)
3 turn off your phone entirely. soft reset your phone. check that wifi is still internet and not work.
4 turn on wifi only. check that u have normal internet access. emails and hotmail etc work ok. then open messenger and sign in.
5 if you have to, use wlm switch user command and relogin.
this should work. once u have run and got it working, you can turn your phone back on and it should continue to use wifi and not 3g
s.
simon_darley said:
try these ideas.
1 ensure your wifi settings are to internet and not work
2 ensure you dnt have the ip address set up in exceptions (these ips are only for intranet)
3 turn off your phone entirely. soft reset your phone. check that wifi is still internet and not work.
4 turn on wifi only. check that u have normal internet access. emails and hotmail etc work ok. then open messenger and sign in.
5 if you have to, use wlm switch user command and relogin.
this should work. once u have run and got it working, you can turn your phone back on and it should continue to use wifi and not 3g
s.
Click to expand...
Click to collapse
Still times out on checking internet connection.
I get email and internet fine. but no WLM.
I am using ATT. What should there be under Connections?
I have tried 2 My ISP and Media.net on My ISP it times out automatically, on Media.net it takes a while to time out.
Also did a hard reset to make sure that it wasnt anything I had installed. With the stock rom I still get the time out.
the proxy server u r using will b blocking that port.
I use telstra in australia, internet and push email works with proxy on, but wlm doesnt.
so i just turn off proxy and everything works except some of the telstra stuff which i dont want anyway.
proxy tends to give a garden firewall of their preferred content.
dunno how to deal with att, but suggest one of your connections should allow you to bypass the proxy styled firewall garden of att.
soz i dont have it to help u further, except to point u towards the proxy manager.
just to reiterate and emphasis the telstra proxy manager controls over rides and screws up 3g/next G connections AND my wifi.
only by turning this proxy manager off can i use wifi and 3g fully.
Thanks, there is a cab that disables the proxy on the att phone, so I disabled it, but that didnt help either.
Wlm 10.6.0031.2600
Hi, does anyone have the cab or installer for the latest WLM 10.6.0031.2600? Can someone post it or make it available for download? Thanks a million
Is anyone who has ATT able to use Windows Live Messenger?
Okay since WLM obviously doesnt work over wifi. How do you guys setup your outlook to get Hotmail?
Packrat said:
Is anyone who has ATT able to use Windows Live Messenger?
Click to expand...
Click to collapse
Absolutely. I use it all the time. Mostly through 3G but sometimes through my home wireless network. Never had a problem.
Memnoch30, what version of WLM you using and do you have it set any special way in connections to use WIFI?
Well it seems I am not the only one having this problem, I got an interesting PM stating another person has the same problem as I do. If someone else could do me a favor, turn off the phone in comm manager, but keep wifi on. Can you still connect to Live???
Anyone? Thanks in advance
Hi
Just try to keep the Red button pressed ~3s (it will cancel the GPRS connection) then Messenger will use the wifi one (i do like that since i use pocket msn).
Kayser said:
Hi
Just try to keep the Red button pressed ~3s (it will cancel the GPRS connection) then Messenger will use the wifi one (i do like that since i use pocket msn).
Click to expand...
Click to collapse
Doesn't work for me, all that does is close out Live messenger.
anything else I need to try?
It doesnt work even if I turn off GPRS and leave wifi only.
I am currently using an unlocked Dash flashed with Kavana's latest WM 6.1 rom. As stated in the title I am on the AT&T network. I tried using the connection setup wizard that came with the ROM but got mixed results. I manually entered my previous settings but I am still having issues with my Activesync Exchange Server and MMS messages. Normal web browsing seems to work fine and apps like Google maps work as well.
Can anyone verify the proper settings for the current AT&T Network? I would like to see GPRS, Proxy and MMSC settings. I have seen a lot of older ones that seem to be from Cingular but I can't be sure those will still work.
Thank you in advance for your help.
You seem to be having same trouble i was having
This is what you need to do.
Do the set up network wizard.
Once you have that up. Goto GPRS connection. there a field to where to connect.
For At&T ... choose connect to internet.
for both connection configuration.
I don't have the dash in front of me but i'll post again but in the mean time play with this much knowledge. and i'll try to post up a reply for your question.
Based on previous version i am so happy that there is a connection wizard here i don't have to put in all that crap setting again. all i do is run the wizard and just change the connection settings.
it works all the time.
Thanks for the help. I've messed with it but I still seem to having issues. If you could post what your settings look like I would appreciate it.
I got the Exchange Server to work but I am still having issues with MMS. I get the Error Syncronizing. I've never been able to get them to work since I went to the unlocked Dash.
Weird
My Internet connection was working fine... then I installed Meschle's WM6.1 Touch, which I like very much...
... but I lost the ability to reach the Internet. All my settings are correct for a WAP connection to T-Mobile, I tried it with and without a proxy, I tried changing ports on the proxy... but I keep getting the HTTP ERROR message regardless of what changes I make. It happens on any and all sites.
I know the GPRS connection is made, because after that the browser shows the "locating..connecting..opening" sequence... and then the error.
Help !
same here
this has been happening on my brothers phone for some time. I have tried 3 different roms and 2 tmobile settings as well as the network wizzard. Any fix out there? One rom actually after the setup wizzard let him connect for a few hours now this is back.
first call the T-mobile and ask them if the service is activated for you.
and try to delete all settings and then see this post it may help you
http://forum.xda-developers.com/showthread.php?p=2237367#post2237367
Does anyone know why when quick gps expires, it doesnt automatically update? I am on a custom ROM (mightyrom 2/1) on a CDMA Tp2 (SPRINT). the quick GPS data expires and says EXPIRED but is never automatically updated until I manually do an update. I have it set to automatically update. is there a service or something that needs to be running??
Expired means the 7 days are up that the satellite positioning was good for. It should download new positions which will then say 7 days...
Seems to work fine when I use wireless or when I update synced to my PC...
Thanks.. I know what expired means on QUICK GPS. the issue is that it NEVER UPDATES the data. I have it set to DOWNLOAD AUTOMATICALLY and ALSO to DDOWNLOAD when connected to a PC. NADA.. is there a service that needs to be running or something??
anyone with a solution??
You only need an active internet connection for the update to run. There are no services required to be running for the update. Try opening an internet connection, either 3G or wifi and then manually run the update to make sure the quickgps program itself is not corrupted. If it does update manually, likely you need to change the internet settings to allow programs to open a 3G session.
ms0529 said:
You only need an active internet connection for the update to run. There are no services required to be running for the update. Try opening an internet connection, either 3G or wifi and then manually run the update to make sure the quickgps program itself is not corrupted. If it does update manually, likely you need to change the internet settings to allow programs to open a 3G session.
Click to expand...
Click to collapse
Thanks for the info.. It does run manually and everythng else runs on its own wihtout me doing anything such as EMAIL, weather, facebook tab updates, etc etc etc... I think its only the quick GPS not running when the data expires.
I also have the check in the down when connected to USB and it doesnt do that either wen I am connected to my computer...
Mine is always up to date. I look every few weeks, and quite unlike my original Tilt, it's always up to date.
check your connections page under network management and make sure of the selection under "programs that automatically connect to the internet should connect using". I am not sure on sprint, but at&t uses "medianet" for such connections. Try one or more of these settings to see if it makes a difference. Your mail programs are always open, running in the background, and quickgps starts up, runs and shutsdown, so it must enact a web connection, where your mail does not. Likely, since the program works manually, the settings here are not correct
ms0529 said:
check your connections page under network management and make sure of the selection under "programs that automatically connect to the internet should connect using". I am not sure on sprint, but at&t uses "medianet" for such connections. Try one or more of these settings to see if it makes a difference. Your mail programs are always open, running in the background, and quickgps starts up, runs and shutsdown, so it must enact a web connection, where your mail does not. Likely, since the program works manually, the settings here are not correct
Click to expand...
Click to collapse
I just checked and under programs that automatically connect it was set to "MY WORK NETWORK" .. then there is program that connect to a private network .. its also set to MY WORK NETWORK. I changed the top on to the choice called SPRINT .. I bet that solves it... Should I worry about the other setting for private networks?
EDIT: I changed it to SPRINT but it keeps resetting to "MY WORK NETWORK" .. how do I fix this? is there a registry setting for this?
EDIT: I put sprint for BOTH SETTINGS and it appears to save... do I need to worry about the PRIVATE NETWORK SETTING since I dont have any VPN set up on the phone.. the MY WORK NETWORK does not have any settings in it...
No, don't worry about it. It is just another option to set up alternate connections, if you need them. Leave it at Sprint for your internet connections and you should be fine. Write more if you need help,
Im on a new ROM and once again QUICKGPS is not automatically downloading when expired.. I followed the fix on here that works on the other rom I was running.. any ideas? Im on mighty 6/20
anyone??? no ideas??
Guys, I just purchased Sprint Touch Pro 2 and using it in Europe (GSM).
Though when I try to run the GPS application, it forces me to download the latest satellite data but even if my phone is connected to the internet via USB, it doesn't download anything.
Any idea why it isn't working? And also, why does the software needs to download stuff from internet, a GPS device should be finding the satellites himself, without any "aid" from external sources.