Vista drivers request. - P3300, MDA Compact III General

Hi - I'm having serious problems getting the orbit and vista on speaking terms.
Could someone please upload the drivers that they use?
Particulary those listed under mobile device (blue icon) - might be Pocket PC or Artemis - dont know cant get that far! There should be two I think.
Many Thanks.
debully.

My Vista simply discovered the device automatically and instantly allowed me to sync without any need for drivers or active sync...

Mine didn't hence request.

I also have some problems with Vista. It won't recognize my phone. It says unknown USB device in the device manager. Vista also won't install Windows Mobile Remote Adapter . Think some drivers could really help me out, can you guys upload them? oh i installed vista 32 bit on a 64 bit processor, is that a problem?

please take out sd card and try to sync - please post result.
Thanks
debully

Related

RUU Works in Vista RTM!

Hi. I`ve finally found the way to connect mtty and run rom update utility in Vista. tested on rtm 6000.
First of all, connect your device when it`s in bootloader.
next, open Windows Mobile Device Center and in connection settings uncheck Allou USB Connections.
next, goto contol panel-administrative tools-services and start windows mobile device connectivity and windows mobile device 2003 connectivity
next, goto device manager and find your device and update the driver to the one from AS 4, i attached it, wceusbsh.inf.
then, kill wmdc.exe with any taskmanager
You are Ready. run ruu or connect MTTY. I guess that vista default driver uses another port, not WCEUSBSH001, that`s why we have to use the old driver.
Didnt work for WM6 update
is this supposed to work for the WM6 upgrade?
Didnt work for me.
Attached the files for x64 version of vista (taken them from x64 XP).
Drivers are unsigned, so you have to turn off driver signature enforcement in vista. Google how to do this.
And yes, this can be used to upgrade uni to WM6.
No this method did not work for me for O2 Atom.
Using Vista Business with released final windows mobile device driver. No use. Able to sync perfectly. But RUU ROM update is failing. Trying to disable the firewall also no good.
omg thank you so much for this! i was trying to downgrade my hermes from 1.06 to 1.04 CID but vista's windows mobile device centre or whatever its called is dodgy as hell and i couldn't run RUU. you are a god send, thanks again!
yes, this is working out very well with vista.
Thank you.
Vista cannot find drivers for Hermes after flash
I used these drivers to allow me to flash my Hermes with the latest Cingular image. After the device reboots, Vista no longer recognizes it. Vista prompts me to search for a driver but cannot find one. Is this related to installing the back-level drivers above? Anyone know how to recover from this?
Thanks!
No joy....
This did not work for me. I'm running Vista Ultimate and a TMO MDA.. I hope there is a solution soon.. I really want WM6 on my phone, but I don't want to have to have an XP machine around....
sp3dev said:
Hi. I`ve finally found the way to connect mtty and run rom update utility in Vista. tested on rtm 6000.
First of all, connect your device when it`s in bootloader.
next, open Windows Mobile Device Center and in connection settings uncheck Allou USB Connections.
next, goto contol panel-administrative tools-services and start windows mobile device connectivity and windows mobile device 2003 connectivity
next, goto device manager and find your device and update the driver to the one from AS 4, i attached it, wceusbsh.inf.
then, kill wmdc.exe with any taskmanager
You are Ready. run ruu or connect MTTY. I guess that vista default driver uses another port, not WCEUSBSH001, that`s why we have to use the old driver.
Click to expand...
Click to collapse
Thank You! Worked for me, using Vista Ultimate.
Thank you! It works...
I was also unable to get this working. I am running Vista Enterprise RTM. I followed the steps in the list exactly, and also tried restarting the services (they were already started) and killed mobsync.exe (Sync Center). No such luck . RUU crashes while trying to read information from my phone. Has anyone who had problems earlier got it working yet?
Thanks!
sp3dev said:
next, goto device manager and find your device and update the driver to the one from AS 4, i attached it, wceusbsh.inf.
driver.
Click to expand...
Click to collapse
Hi,
I'm having difficulty updating the Build in driver with the one you supplied. As soon as I try to update the driver I get a meesage saying the one installed is already the most recent. As soon as I uninstall the original driver it is redetected and reinstalled.
Anyone have any help on this.
Thanks,
Tom
Right click on the device and click "Update Driver Software"
Click "Browse my computer for driver software"
Below the textbox, click "Let me pick from a list of devices on my computer"
Now you can click "Have Disk" and choose the drivers you downloaded
Pick the device it pulls from the .inf file
Step through the rest of the wizard and you should be set.
The wording of the buttons may vary but should be similar to what you have (I'm running Vista).
RUU Version
What version of the RUU software is working, I tried the 2.00.1 that came with the 2.61 radio upgrade and it did not work.
I, too, am using 2.00.1. I'm going to try these steps on one other machine I have that's running Vista. We'll see what happens!
Thanks for providing a solution that works on Vista.
Upgraded my Hermes using mtty and RUU, no problems with the driver posted.
vista sucks big time...
best way -> uninstall -> xp
Opinions
ericlin0122 said:
vista sucks big time...
best way -> uninstall -> xp
Click to expand...
Click to collapse
Like they say, everyone has one.
mamaich said:
Attached the files for x64 version of vista (taken them from x64 XP).
Drivers are unsigned, so you have to turn off driver signature enforcement in vista. Google how to do this.
And yes, this can be used to upgrade uni to WM6.
Click to expand...
Click to collapse
That zip file is corrupt. Anyone else know where I can get it?
Also, why do the steps in the first post say to uncheck "Allow USB connections"? When I do that, I can't find it in the device manager.
it workes finally but i realised that the 2.00.1 RUU is problematic, older versions work fine

usb to pc missing in htc snap rom

hi friends
i am not abe to find out where is the usb to pc icon on my newly installed htc snap rom
my active sync is not working
as i wanted to uprade to rc2 of the same rom
please help
can we flash without active sync?
Same here
I had the same problem with vista's mobile device center. It would not recognize my phone. Luckily I had an old windows XP desktop that would recognize my phone.
I don't think there is currently a solution to get the current build of the energyrom to work with mobile device center in vista. Which is too bad cause I would rather not use XP everytime
thanks for the reply
but i have windows xp pro
and still the active sync is not working and i want to flash the rom
how can i flash it as i have to unlock through sda unlock application which runs only through activesync
Maybe you guys should continue this discussion where it belongs... I might see it there... LOL

Generic RNDIS Driver not found?

When I connect my tp2 to my windows 7 pc it says, Generic RNDIS Driver not found.
i would like to sync my device with outlook. bluetooth works, but USB is faster.
Can somebody help me??
The first time I connected it used windows update to find the drivers it needed. Make sure you are connected to the net. Download (if update has not done it for you) and run windows mobile device center.
All this happened automatically the first time I connected.
Is there a place to download these drivers?
It prevents me from tethering.
Obviously if I need to tether, I have no internet connection to download the driver. (Catch 22)
I had this issue on my Titan, and I used to keep the drivers on the SD card. I could install from there and be online.
djkasmic said:
When I connect my tp2 to my windows 7 pc it says, Generic RNDIS Driver not found.
i would like to sync my device with outlook. bluetooth works, but USB is faster.
Can somebody help me??
Click to expand...
Click to collapse
I was having the same problem on my XP until I installed Active Sync.

TP2 w/ winmob 6.1 cant sync with win7x64

Hi!
I dont have any trouble syncing my TP2 with my winXPsp3 PC.
But when it comes to my new notebook with windows 7x64 i get the following scenario:
When connected for th 1st time, windows dl'ed synccenter and drivers. I then could connect my TP2 and also dig through the data on it (both device and sd card that is...). But i can not sync whatsoever. Every time I start the syncing, I get an error message somewhat like:
"sync couldnt be done, if prob persist, delete device and set up new partnership...".
Any suggestions???
thx
AO
Did your system find and install 64-bit drivers on your Windows7 system the first time you connected your phone to your PC? Actually, I thought this happened automatically when you connected it for the first time. Are you using USB or Wireless for the first time? I think you might need to use USB for the first time connect and setup on Windows 7.
-Frank
rockscientist01 said:
Hi!
I dont have any trouble syncing my TP2 with my winXPsp3 PC.
But when it comes to my new notebook with windows 7x64 i get the following scenario:
When connected for th 1st time, windows dl'ed synccenter and drivers. I then could connect my TP2 and also dig through the data on it (both device and sd card that is...). But i can not sync whatsoever. Every time I start the syncing, I get an error message somewhat like:
"sync couldnt be done, if prob persist, delete device and set up new partnership...".
Any suggestions???
thx
AO
Click to expand...
Click to collapse
I had an issue like this and had to delete a device from the WMDC. It only has room for two devices. Once I deleted a device (and made sure my phone was set for SLOW activesync), I haven't had any problems. I'm running W7 64 Professional.
However, My device is on WM 6.5.x now.

Android USB Driver for HTC Diamond 100

Hy guys...
If anyone has problem installing USB drivers for Android, on XP, and is getting something like this
XDA
CDC ACM Data
CDC Abstract Control Model
Maybe this will help you...
This Drivers are for Windows XP, tested and working - you can mount SDCard
thanks
i will test this driver but it work on froyo or gingerberd !?
thank you.
thank you.
This Drivers are for Windows XP, tested and working - you can mount SDCard
is it working on win 7?
Haven't tried it, but it should work... the only thing that may not work is that the drivers are not signed....
Worst case... driver will fail to install due to signing issues...
Please try and update us if they work...
the same after using it
i got htc dream in device manager but i want to share data and internet between diamond and pc is it possible?
its working on xp..
This is for USB Mass storage, you need the modem part of the driver which i don't know anything about.
The drivers are modified from an HTC Dream android driver...
I don't think i can help you with this part yet... i will try and search the net and if we are lucky maybe we can get it working.
Thanks you!!!
KekeJr said:
This is for USB Mass storage, you need the modem part of the driver which i don't know anything about.
The drivers are modified from an HTC Dream android driver...
I don't think i can help you with this part yet... i will try and search the net and if we are lucky maybe we can get it working.
Click to expand...
Click to collapse
I actually found this trying to get a driver for the USB tethering/modem/RNDIS part.
hyc has fixed USB tethering, but of course WinXP doesn't have the right driver - or the phone isn't presenting itself correctly...
This Google page seems to think with a simple INF file it's fixed (NOTE - if you're on SP3!) but this seems to work for native devices only...

Categories

Resources