Develop Bugs

Wm6 + Vista + Wmdc = Sync????

I've been able to successfully flash the ROM to one of the WM6 editions. All appears to be working well on the TYtn. The problem is that now I cannot sync with my desktop? Is there a way to achieve this? Is Vista looking for an official copy of WM6? TIA...

no dont worry dude, how did you flash the WM6 build??
follow the final steps of one of my guides on this page as you may not have sorted the various settings on the device??
(if you used one of my guides to install can you tell me which one?)

mrvanx said:
no dont worry dude, how did you flash the WM6 build??
follow the final steps of one of my guides on this page as you may not have sorted the various settings on the device??
(if you used one of my guides to install can you tell me which one?)
Click to expand...
Click to collapse
I used your guide to install the following LVSW(2007/04/08) RUU_Hermes_WWE_3.24.0.4...From your guide, am I to assume that WMDC should not be used in Vista? I should DL and use ActiveSync 4.5?

greatg said:
I used your guide to install the following LVSW(2007/04/08) RUU_Hermes_WWE_3.24.0.4...From your guide, am I to assume that WMDC should not be used in Vista? I should DL and use ActiveSync 4.5?
Click to expand...
Click to collapse
With vista you have one choice to Upgrade thats hook the USB up in bootloader mode and kill wmdc.exe make sure you unchecked connect via usb. To resync your phone again just check connect connect via usb in wmdc and it should sync right up i have no problems with mine using vista ultimate
with vista M$ does not alet you download or install activesync anymore your forced to use wmdc they screwed us that way lol

austinsnyc said:
With vista you have one choice to Upgrade thats hook the USB up in bootloader mode and kill wmdc.exe make sure you unchecked connect via usb. To resync your phone again just check connect connect via usb in wmdc and it should sync right up i have no problems with mine using vista ultimate
with vista M$ does not alet you download or install activesync anymore your forced to use wmdc they screwed us that way lol
Click to expand...
Click to collapse
Yes, I used the bootloader to install WM6. However, making the changes as outlined in the tutorial (unchecking advanced usb...) does not correct the problem. Still cannot sync up...

greatg said:
Yes, I used the bootloader to install WM6. However, making the changes as outlined in the tutorial (unchecking advanced usb...) does not correct the problem. Still cannot sync up...
Click to expand...
Click to collapse
Not sure if this is part of my problem. When I try to place into bootloader mode. I get the HTC splash screen. Over top to the splash screen it says "Select KITL Transport: USB KITL or Ethernet KITL (this is highlighted)"
I cannot switch selections, sylus nor any of the controls respond...

greatg said:
Not sure if this is part of my problem. When I try to place into bootloader mode. I get the HTC splash screen. Over top to the splash screen it says "Select KITL Transport: USB KITL or Ethernet KITL (this is highlighted)"
I cannot switch selections, sylus nor any of the controls respond...
Click to expand...
Click to collapse
your not in bootloader mode!
the top left soft key and the top right soft key then stick the styles in the reset hole!
your IPL ans SPL will show..
what are you trying to do? sync or upgrade?
if your trying to sync recheck all setting in WMDC and connect your hermes with the OS running

try to reinstall the activesync, I had problem with connection before and was corrected after a reinstall

darkgemini said:
try to reinstall the activesync, I had problem with connection before and was corrected after a reinstall
Click to expand...
Click to collapse
OK, I've reinstalled WM6 as well as WMDC and still no luck. WMDC shows the connecting message and then stops with an error?

uPDATE
greatg said:
OK, I've reinstalled WM6 as well as WMDC and still no luck. WMDC shows the connecting message and then stops with an error?
Click to expand...
Click to collapse
Still no luck in getting sync. I've disabled firewall and re-installed WMDC. Followed the guide to change the drivers, reinstalled WM6 and unchecked the advanced USB. When I connect the tytn to pc, a found new hardware window opens, check install HW automatically. Get a no drivers found message on PC. On the tytn screen get a pop up window stating connected to usb. Through this process WMDC says connecting and then error?

Sounds like you havent downloaded the latest version of WMDC from MS.

dude, uninstall WMDC and Activesync and start from the beginning of the vista config guide

unwired4 said:
Sounds like you havent downloaded the latest version of WMDC from MS.
Click to expand...
Click to collapse
Do you have a link for the latest version? I thought that it only installs when Vista detects a pda attached?

greatg said:
Do you have a link for the latest version? I thought that it only installs when Vista detects a pda attached?
Click to expand...
Click to collapse
In the guide dude

mrvanx said:
In the guide dude
Click to expand...
Click to collapse
OK, I followed your guide step by step. I did a soft reset to get out of bootloader mode and placed the tytn on the cradel. A found new hardware window opened and I select automatic install. It searched for a bit and came back with a message that "Windows could not find driver software for my device." WMDC shows error...
I'm using Outlook 2007 if that may be the cause?

greatg said:
OK, I followed your guide step by step. I did a soft reset to get out of bootloader mode and placed the tytn on the cradel. A found new hardware window opened and I select automatic install. It searched for a bit and came back with a message that "Windows could not find driver software for my device." WMDC shows error...
I'm using Outlook 2007 if that may be the cause?
Click to expand...
Click to collapse
Does anyone have any more ideas? I'm tempted to go back to WM5...

greatg said:
Does anyone have any more ideas? I'm tempted to go back to WM5...
Click to expand...
Click to collapse
I've also noted that only when the PDA is in bootloader mode does the PC recognize the HTC driver...Anyone have any advise...

If you are just trying to sync (not do an upgrade) the usb to pc connections setting should be checked for advanced
see these links for trouble shooting etc
http://www.microsoft.com/windowsmobile/devicecenter.mspx
http://www.microsoft.com/windowsmobile/devicecenter/troubleshooting.mspx

eagle 1 said:
If you are just trying to sync (not do an upgrade) the usb to pc connections setting should be checked for advanced
see these links for trouble shooting etc
http://www.microsoft.com/windowsmobile/devicecenter.mspx
http://www.microsoft.com/windowsmobile/devicecenter/troubleshooting.mspx
Click to expand...
Click to collapse
Thanks eagle. I just tried to reinstall WMDC and did not do any of the changes as per the guide. Reconnected the PDA (w/advanced usb checked). Vista message says new device found...tries to install drivers...can not locate. Unplugged PDA and unchecked advanced USB. Same thing happens...

greatg said:
Thanks eagle. I just tried to reinstall WMDC and did not do any of the changes as per the guide. Reconnected the PDA (w/advanced usb checked). Vista message says new device found...tries to install drivers...can not locate. Unplugged PDA and unchecked advanced USB. Same thing happens...
Click to expand...
Click to collapse
OK, still no luck. Keeps asking to install drivers and none can be found? Please can anyone help out...

WMDC on Windows 7 RC1

WMDC was working fine for me until I upgraded to RC1 of Windows 7. It did tell me as I upgraded that WMDC wasn't compatible. The only thing I have installed which isn't in fact. Windows own mobile device centre is the only thing not compatible that I had!?!?!?
Anyway, I guess I'll try a reinstall, but does anyone know how I can get it WMDC working again?
(I'm using Dutty's 3.3 and W7 RC1 64bit)

Hi. Now I'm using Windows 7 Ultimate RC Evaulation copy. Build 7100 and everything is working fine. Even rom upgrades working with no poroblem.

hey guys - I'm using RC1 too but the 64-bit - never tried to use it to flash my device though (dual boot with XP)
its the last piece of the puzzle I need in order to migrate completely to W7 and wave goodbye to WinXP.
can you both confirm which versions you are using please? and if 64-bit did you have to install the vista 64-bit driver found on these forums or did it work 'straight out of the box'?
thanks

I have 32-bit version of Windows 7 RC. I just connect mine HTC TOUCH HD to PC and Windows install the drivers and Windows Mobile Device Center install automaticly. Now everything is working. cheers

As I said, I have 64 bit and WMDC wont even start for me

I have Win 7 RC1 64bits, and Duttys HD V2,4
You need to uncheck Enable faster data sync in Settings/Connections/USB to PC..
That dit the trick for me...

Hi! I have 2 notebooks, one with win7 rc1-32bits, the other with win7 rc1-64 bits. I connect my Touch HD on both, succesfully.

Htc Touch HD Aka Blackstone
Windows 7 RC (Build7100)
Everything works GREAT!!!
Flashing, synchronizing!
Must be your config

Windows 7 RC x64 here, can flash without problems, after downgrading HTC-USB drivers to active sync drivers

Windows 7 here X6. Everything works perfect

I'm using Windows 7 RC1 64BIT without any problem.
Have you upgraded from Windows 7 Beta to the RC?
Than you must uninstal WMDC before. After the upgradeprocess reinstall WMCD again.

krillesbox said:
I have Win 7 RC1 64bits, and Duttys HD V2,4
You need to uncheck Enable faster data sync in Settings/Connections/USB to PC..
That dit the trick for me...
Click to expand...
Click to collapse
This fixed it for me. Thanks

You shouldn't need to disable faster data connections. The reason that this method works is that it detects a new device and installs new drivers.
There are a few things to do, I am not sure which in particular does it, but I'vbe upgraded Windows 7 many times and some combination has always worked.
Reinstall WMDC 7.1
Manage partnerships and delete them all.
When you plug in your phone go to device manager, find your phone (if faster data connections is shown, it will be listed as a portable device and a Lan connection)
click "uninstall" on these items, and delete drivers if this option is available.
unplug phone. Wait
Plug it back in.
Let it install drivers
If this still doesn't work. Click on the devices (network connection and portable device) selelct "upgrade drivers" on each, searching the internet.

You shouldn't need to disable faster data connections. The reason that this method works is that it detects a new device and installs new drivers.
There are a few things to do, I am not sure which in particular does it, but I'vbe upgraded Windows 7 many times and some combination has always worked.
Reinstall WMDC 7.1
Manage partnerships and delete them all.
When you plug in your phone go to device manager, find your phone (if faster data connections is shown, it will be listed as a portable device and a Lan connection)
click "uninstall" on these items, and delete drivers if this option is available.
unplug phone. Wait
Plug it back in.
Let it install drivers
If this still doesn't work. Click on the devices (network connection and portable device) selelct "upgrade drivers" on each, searching the internet.

To be honest, now it works I'm not going to mess with it unless I have to. Will it be a slower transfer to the HD?

Hi all,
I had similar trouble with Windows 7 RC, however I followed the instructions posted at: http://capitalhead.com/articles/ena...synchronization-on-windows-7-x64-and-x86.aspx and that did the trick.
If I'm not mistaken, Windows 7 is supposed to download WMDC automatically, however it never did that for me. Hope it helps someone else.
Mike

w7-64bit RC1 here....
WMDC works fine (stock install) - use it both at home and at work, and i flash by renaming and copying rom image to SDcard\blacimg.nhb

Unistall
Try to uninstall WMDC and download and install another one from the internet! It work for me and i had the same problem...

W7 and Blackstone here. Flashing Syncing ... works great.

I know this thread is old but I am having this problem and none of the suggestions I have found out on the internet have solved it. I am basically having the same issue as most people in this thread have had but the REAL problem is that Windows Mobile Device Center will NOT install no matter what I try. I run the setup for it and it looks fine until it gets to 1 second left on the progress bar. Then it sits...and sits...and sits...until finally the bar rolls backward and the installation quits. No error messages, no nothing and no WMDC. I am running Win7RC x64. I will never get syncing working if I can't get WMDC actually installed in the first place. I did look in the event log and it seems there is an error related to VSS every time I attempt an install on this app. Anyone have any ideas?

Flashing from Internal Storage through mtty... Diamond won't boot anymore

Hi all!
Yesterday, I want to flash another ROM to my diamond, and downloaded the nbh file into the Internal Storage... (but I've forgot to rename the file from "ruu_signed.nbh" to "diamimg.nbh")
After, I've formatted the device with mtty application (same procedure as in the relative thread), but when I start the phone for flashing, it can't find any image (obviously)... But it can't boot so!
Now I have to sent it to the repair center?
Or there is a solution for flashing an image in my phone? (for example, there isn't a way to connect the phone to the PC in "storage mode"; or a command through mtty for renaming files)
P.S.: my diamond, when in bootloader mode, won't connect with ActiveSync, I can communicate with it only with mtty software

Connect the phone, start the Bootloader (volume down). If you can read "USB" you will be able to flash a new ROM, try the orginal stock ROM from HTC first.

Söderström said:
Connect the phone, start the Bootloader (volume down). If you can read "USB" you will be able to flash a new ROM, try the orginal stock ROM from HTC first.
Click to expand...
Click to collapse
Thanks for the reply!
I can read "USB" (it's "Serial, when i connect the USB cable to diamond & PC, it changes to USB), but I can't start the RUU utility...

why you can't start the RUU utility??

HELICOPTER88 said:
why you can't start the RUU utility??
Click to expand...
Click to collapse
It's because the phone don't connect with ActiveSync (I mean)... The RUU don't recognize the phone!
I've tried with three different usb cables, with a different usb port, with reinstalling ActiveSync, with another two PCs (the first with Win Xp & ActiveSync, the other one with Win 7 & the Mobile Devices Center) none of this can't see the phone connected... I repeat the only thing can I use on the phone is the BootLoader, and there isn't no way to connect it to a PC for execute the RUU...
At now, I'm looking at the mtty commands' list, maybe there's one that can operate on the files in the Internal Storage...

krusty19 said:
Thanks for the reply!
I can read "USB" (it's "Serial, when i connect the USB cable to diamond & PC, it changes to USB), but I can't start the RUU utility...
Click to expand...
Click to collapse
The phone is ready for usb connection, but ActivSync (AS) must recognize it by this way
- Open AS > File > Connection Settings
- Leave all default then press Conect (button)
- Let AS detect all connections. When it does finish (you can see the message ... USB is available...), DON'T close the window
- Run RUU, now it should see your device !!!

You don't and shouldn't need ActiveSync or WMDC to run mtty. You need the updated drivers for your phone.

gsmdb said:
The phone is ready for usb connection, but ActivSync (AS) must recognize it by this way
- Open AS > File > Connection Settings
- Leave all default then press Conect (button)
- Let AS detect all connections. When it does finish (you can see the message ... USB is available...), DON'T close the window
- Run RUU, now it should see your device !!!
Click to expand...
Click to collapse
Many thanks for this answer!
I see "USB is available",I leave open that window, and I run the RUU...
In first moment, it find the phone, and show me the window for updating (showing the old rom, and the new one) but when i click update it stops at 0%, telling me that can't communicate with the phone...

openwicked said:
You don't and shouldn't need ActiveSync or WMDC to run mtty. You need the updated drivers for your phone.
Click to expand...
Click to collapse
Ok, it's true... But I can run mtty, is ActiveSync/Mobile Device Manager that can't see the phone!

krusty19 said:
Ok, it's true... But I can run mtty, is ActiveSync/Mobile Device Manager that can't see the phone!
Click to expand...
Click to collapse
Again, you don't need ActiveSync/WMDC to run a custom RUU. Make sure you have the updated drivers for the device (try uninstall/reinstall in the host PC>>Device Manager). Are you sure you're running a "Developer" version of HSPL?
About ActiveSync: ActiveSync (server) needs the activesync client (on your phone) to run for the purpses of 'sync'ing contacts, mail acocunts etc. It will not affect RUU in anyway. If you further clarity on this, I'll make a larger post on the technical blah blah someplace...but someone from xda might have done that already.

openwicked said:
Again, you don't need ActiveSync/WMDC to run a custom RUU. Make sure you have the updated drivers for the device (try uninstall/reinstall in the host PC>>Device Manager). Are you sure you're running a "Developer" version of HSPL?
About ActiveSync: ActiveSync (server) needs the activesync client (on your phone) to run for the purpses of 'sync'ing contacts, mail acocunts etc. It will not affect RUU in anyway. If you further clarity on this, I'll make a larger post on the technical blah blah someplace...but someone from xda might have done that already.
Click to expand...
Click to collapse
Ok, now I understand... Thanks!
The driver my PC is using is "HTC USB Sync", it's correct? I've tried many times to uninstall, and re-install from Device Manager, but no changes...
The SPL is 1.93 from OliNex!

I think there is an incompatible driver in your Windows PC.
1) open bootloader your phone then plug in usb cable
2) If you are using Windows 7, open control panel
Go to Device Manager.
Find device called HTC Sync or QUACOMM something delete it (including driver)
3) Unplug the USB Cable and plug in again.
4) Windows 7 will start to find an appropriate driver for your device (check device manager)
5) Unplug the USB Cable and plug in again to use the new driver
6) Run RUU to upgrade the ROM
If you are not using Windows 7, you can do the same but you have to install driver manually because only Win 7 can search and update driver automatically. Drivers can be found on HTC CDs, XDA-developers site, or well somewhere else.
If you can still access Boot loader, there is no need to panic. Somehow, if you still cannot do this, just borrow somebody else computer then plug in and try to upgrade.

krusty19 said:
Ok, now I understand... Thanks!
The driver my PC is using is "HTC USB Sync", it's correct? I've tried many times to uninstall, and re-install from Device Manager, but no changes...
The SPL is 1.93 from OliNex!
Click to expand...
Click to collapse
Cool, Satus has given the exact things you can do...also make sure your HSPL is unsigned to allow unsigned roms to be flashed. I use the Win7 default drivers for my device (that it downloads) and it works perfectly IMO.

satus said:
I think there is an incompatible driver in your Windows PC.
...
Click to expand...
Click to collapse
I've tried with a just-formatted Win 7 PC... It's all ok!
It has downloaded the driver from Windows Update, and without open the Mobile Device Manager, the RUU updated my phone successfuly!
Many many thanks to all!...

krusty19 said:
I've tried with a just-formatted Win 7 PC... It's all ok!
It has downloaded the driver from Windows Update, and without open the Mobile Device Manager, the RUU updated my phone successfuly!
Many many thanks to all!...
Click to expand...
Click to collapse
You format your Win 7 PC for this??? So hardcore hahaha

satus said:
You format your Win 7 PC for this??? So hardcore hahaha
Click to expand...
Click to collapse
We are talking about windows... Mobile or fixed, it's better to start from zero!

satus said:
I think there is an incompatible driver in your Windows PC.
1) open bootloader your phone then plug in usb cable
2) If you are using Windows 7, open control panel
Go to Device Manager.
Find device called HTC Sync or QUACOMM something delete it (including driver)
3) Unplug the USB Cable and plug in again.
4) Windows 7 will start to find an appropriate driver for your device (check device manager)
5) Unplug the USB Cable and plug in again to use the new driver
6) Run RUU to upgrade the ROM
If you are not using Windows 7, you can do the same but you have to install driver manually because only Win 7 can search and update driver automatically. Drivers can be found on HTC CDs, XDA-developers site, or well somewhere else.
If you can still access Boot loader, there is no need to panic. Somehow, if you still cannot do this, just borrow somebody else computer then plug in and try to upgrade.
Click to expand...
Click to collapse
I have done this suggestion without any luck... i'm able to get into bootloader, get windows 7 to install the driver as PocketPC USB Sync. but when i run the RUU utility it does not find the phone.

XDA3 upgrade on Windows 7 (64bit)

hi,
i am using win7 (64bit) and just upgraded my xda3 from 2003 to 6.5.. how?
just by using oracle's virtual box
i have installed xp on that.. then connected the xd3 over the cradle..
used the utilities for xp (maupgrade) and finished.. as on a real xp machine.. so easy!
here is a pic:
http://img844.imageshack.us/f/unbenanntxvy.jpg/
excuse my bad english.. i have blacked out some private stuff on the screen.. btw, i am using dualview.., thats why the screen is soo wide
HF with that information

Serce1975 said:
hi,
i am using win7 (64bit) and just upgraded my xda3 from 2003 to 6.5.. how?
Click to expand...
Click to collapse
Heyho,
just read this Fu**ing great Tut from D-Two:
http://www.mediafire.com/?wozgwddo3ay
all you need is in this PDF, also all Software Downloads as Links...
So, there´s no need for Virtual Crap, but anyway...Thanks for that

at first i use Win 7 64bit I'm get confuse too, but that Tut give me a light.
im already try almost all rom in this forum for BA, but i think the best room is WM6.1+Manila by dtwo http://bit.ly/b44Dwe.

the important thing is, it worked. but to get on with galluslongus' idea, for flashing with win 7 (even x64) you don't need to run a virtual machine. i tried them all and encountered that to correctly loop through the usb correctly to any virtual machine (vmware, virtual box, virtual pc xp mode, virtual pc 2007...) you need the correct windows 7 drivers anyways. after installing those drivers you can flash in win7 directly, like the way, most people do.

i open this thread again.. because i am now at the point to flash RC5 on my BA. but first i had to downgrade to 2003 to upsize to 60MB Space.. but i cant downgrade, although the right image is in the folder with MaUpgade and i have done all the things in the PDF Guide like driver change and further steps..
if i start MaUpgrade (BA is in USB mode) the tool didnt detect the version.. if i press next, the tool checks the device and then notice me of successfull upgrade.. but my device is still running 6.5.3??!
Any advice?

Serce1975 said:
i open this thread again.. because i am now at the point to flash RC5 on my BA. but first i had to downgrade to 2003 to upsize to 60MB Space.. but i cant downgrade, although the right image is in the folder with MaUpgade and i have done all the things in the PDF Guide like driver change and further steps..
if i start MaUpgrade (BA is in USB mode) the tool didnt detect the version.. if i press next, the tool checks the device and then notice me of successfull upgrade.. but my device is still running 6.5.3??!
Any advice?
Click to expand...
Click to collapse
you don't need downgrade!!! flash the rc5 it has an app for rezise at the beginning!!
PS: You must put the Blueangel into the Bootloader!!

its not my first time, and i did the previous steps.. driver update for win7 64bit. look sreen:
My device is running WM 6.5.3 Beta with 1.15.0 Radio
but i still get that Error 150.. i tried both RC5s on ur mainpost. i tried it with your updater.. what i am doing wrong? cant figure it out - the BA is in Bootloader and the cradle is connected via backside USB Port, not Hub or frontside. On Screen i see USB!
EDIT:
Now its working!!
I just reinstalled the driver and then sign it again via dseo13b (putin .sys in win32\drivers) - restarted pc and now it works!! YES!!

?? didnt understand anything.. sry! whats the problem?

omg zonice nomne

Drivers with Windows 10

Hello guys,
I recently upgraded to Windows 10 and I got the surprise that my computer doesn´t recognize my HTC ONE M8.
I installed HTC Sync for get the lastest drivers but it didn´t help. On Windows I go to device manager and it seems it recognize an "Android device" but with a little exclamation that says that there is no drivers for this device.
Anybody had the same problem? How did you fix it?
Thanks in advance and sorry for my poor english.
Regards.

Did you also have this problem on Windows 8.1?
I had the same driver issue when I was running Win 8.1 Pro. I couldn't get the phone to be recognized.
What I ended up doing is downgrade (or should I say upgrade?) to windows 7. All is well now.
If you keep windows 10, you may have to wait until HTC updates their drivers for the new OS. I'm not familiar with any other solution at the moment.

nullfeed said:
Did you also have this problem on Windows 8.1?
I had the same driver issue when I was running Win 8.1 Pro. I couldn't get the phone to be recognized.
What I ended up doing is downgrade (or should I say upgrade?) to windows 7. All is well now.
If you keep windows 10, you may have to wait until HTC updates their drivers for the new OS. I'm not familiar with any other solution at the moment.
Click to expand...
Click to collapse
Actually I installed on my new computer Windows 8.1 Pro edition and I think I´ve never connected my phone to this computer so I cannot tell you if it was working on Windows 8.1.
I think I´ll wait until other pal put a solution.
Thanks

It works with 8.1, but connection can be really sketchy. Connects and disconnects rapidly, but eventually connects.
Sent from my HTC One_M8

Braaank said:
Hello guys,
I recently upgraded to Windows 10 and I got the surprise that my computer doesn´t recognize my HTC ONE M8.
I installed HTC Sync for get the lastest drivers but it didn´t help. On Windows I go to device manager and it seems it recognize an "Android device" but with a little exclamation that says that there is no drivers for this device.
Click to expand...
Click to collapse
Mine works fine in Win10. Are you an admin or regular user?

Same here, no issues at all on a clean win10 install

No issues here with windows 10, 64bit.
Upgraded from windows 7.

Drunkula said:
Mine works fine in Win10. Are you an admin or regular user?
Click to expand...
Click to collapse
Admin user.
Did you do a clean install or just upgraded from a previous version?
Did you install HTC Sync for get the drivers or you installed from other site?

I may have had HTC Sync on before - don't recall. This copy of Win10 was an upgrade install from Windows 7.

https://www.dropbox.com/s/jtbhe8xv1wvmzfh/ADB_Fastboot_Drivers_Win81.zip?dl=0
Follow that link, and download the file
1. Disable Windows driver signature (option 7 from advanced options)
2. Connect phone to PC
3. Go to device manager, you can find it through cmd prompt or cortana
4. Once in device manager, locate anything that says android usb or something like that ( I cant remember)
5. Update the device driver by looking through your computer for the location of ^ above download zip
I have no tried this yet, but I dont see why it wont work...PM me if you have questions
Edit:
I just did all of what I described above, and TBH I'm not sure if it would work or not. I do not currently have ADB SDK installed on my laptop, but I have found what appears to be a sound-proof method. Im going to assume the reason you want that connection is because you plan on using adb ? Anyhow, here's the link:
http://forums.team-nocturnal.com/index.php?/topic/1362-how-to-adb-fastboot-in-windows-xp-7-81-10/
In the second post of the link ^, it has been shown to work with HTC devices, hope this helps: let us know & I can dig deeper...