I am using the mun WM6 Rom (thank you) and can install the widcomm stack that superDave wrote for the hermes. It has no memory error warnings and seems to run but can't pair or discover any devices. Anyone have an idea how to fix this?
Thanks
Widcomm, BT500v + A2DP + WM6 ... not possible?
bjrmd said:
I am using the mun WM6 Rom (thank you) and can install the widcomm stack that superDave wrote for the hermes. It has no memory error warnings and seems to run but can't pair or discover any devices. Anyone have an idea how to fix this?
Thanks
Click to expand...
Click to collapse
Same here ...and can't uninstall it either.
Related
Hi guys,
I got my HT820 stereo headphone.
Everything is okay, except the Audio interruptions (5-8 seconds) I face once in every 25-30 seconds.
I am sure, many of you would have gone through this issue and got it solved.
Find below my ROM configurations and let me know how to overcome this problem.
-Ari
Search Zoki A2DP hack
Is this the ZoKi BT Hack?
http://blog.waynezhang.com/index.php?tag=d900
A2DP registry hack to avoid Audio Interruptions
Hi James72,
Many thanks for your reply. When I could not copy .ddl files into windows.
It says "read only" or "no memory". I tried it by exploring in Activesync.
I also uploaded the tornado's registry hack files in this message.
-Ari
I use this:
Re: Tornado A2DP Registry hack in JasJar - To use Motorola H
i have the QTEK ROM, and i get the same thing with WIFI enabled. just a guess.
James72 said:
I use this:
Click to expand...
Click to collapse
Doesn't work on the AKU 3.2 ROM by Lt.Cmdr.Ivan
richardlai said:
James72 said:
I use this:
Click to expand...
Click to collapse
Doesn't work on the AKU 3.2 ROM by Lt.Cmdr.Ivan
Click to expand...
Click to collapse
Does this mean, even Lt.Cmdr.Ivan's ROM with AKU 3.2 still experiences the BT lag issue?
I wanted to try his ROM, but if this problem is there too then I'll wait a bit till December to do a full install.
Universal Broadcomm Stack (Test)
This is an earlier stage of porting Broadcomm Stack to universal device so something might not work, or not work very good...hopes that I didn't forgot something... and dont expect everything to be perfect... its still on test stage...
Tested Operation (On My AKU3.5/Crossbow):
- Headset/Handsfree (Tested With Nokia BH700)
- A2DP (Tested With My PC)
- File Transfer (Tested With Nokia phones, Desktop PC, PocketPC, HP Ipaq)
- Networking / LAN Access with my pc
- Bluetooth ActiveSync
- Bluetooth Serial Port
- Business Card Exchange (Object Push)
- Connect to internet via other Mobile Phone (BT DUN With Nokia 6165i CDMA Phone)
Untested operation:
- Bluetooth SAP Profile (Broadcom Version)
- Bluetooth PAN Profile
The instalation is quite complicated a bit, I've already talk with vijay about this,
hopes that he'll come out with app that will switch between the two stack only with soft-reset (app that will read *.ini input is enough, or read *.reg is more cool), cos My v1.1 crossbow is hv this stack built in (Dual bluetooth stack capability), u just need to activate it, so user might switch between the two stack easily with softreset only.
Instalation:
1. Install SIGN_UNIBR176.0500.CAB
2. Restart.
Uninstall:
1. Install ActivateMSBT.CAB FIRST.
2. Restart
3. Uninstal/remove Broadcomm Stack.
I need everyone to be involved with this one... any input is more then welcome... lets work together guys and make this stack better...
Get the file here:
ftp://xda:[email protected]/Universal/Cooked_ROMs/helmi_c/UNIBR176.0500.zip
Unsigned
ftp://xda:[email protected]/Universal/Cooked_ROMs/helmi_c/UNSIGN_UNI1.7.6.0500.zip
UnRoute.exe are taken from superdave. Some parts of the stack is taken from Fujitsu Siemens T830, some from ASUS P525.
I still need couple of files, Anyone have T830 rom dump??
I've some work with apache device, from its configuration, it should work also with apache... I dont know, I dont hv the device..
regard,
Helmi
Lol SWEET
Read your pm just a second ago
Looks like i'm the first to dive in.
It's friday here so I'll prolly install it right away and test it over the weekend.
dips on the work dude
I tried to install it several times, but everytime I get the message 'Installation of SIGN_UNIBR176.0500.CAB was unsuccesful.'
I'd love to give it a try...
I am unable to install the SIGN_uNI cab file, I tried installing to device and storage. I'm using Helmi 3.5 rom 1.3.1.
Looks like I'm not the only one
I'm using the WM6 crossbow rom
I've tried:
Close app
disable BT
install (no success)
soft reset
flight modus on (no success)
hmm... I'll post the unsigned one...
EDIT:
check this setup.
ftp://xda:[email protected]/Universal/Cooked_ROMs/helmi_c/UNSIGN_UNI1.7.6.0500.zip
helmi_c said:
hmm... I'll post the unsigned one...
Click to expand...
Click to collapse
Thank you manyfold
OK, able to install the unsigned one...Thnks
Unsigned version installs fine on my Aku 3.3 Apache. BT starts and the blue light blinks. Unfortunately, my stereo headset is in my car so I can't test it. I'm really confident it will work fine.
Bushrod said:
Unsigned version installs fine on my Aku 3.3 Apache. BT starts and the blue light blinks. Unfortunately, my stereo headset is in my car so I can't test it. I'm really confident it will work fine.
Click to expand...
Click to collapse
If it also work on my AKU3.3 for Apache then maybe I'll built in ROM in my next Apache Custom rom, thats will be cool, with ability to switch between stack, but I just can't find time to create the switching app...
Working with Sony-Ericsson HBH-DS970 (stereo) Fine! Thanks!
Thanks helmi_c, I find it super!!!
It works Perfect with i.Tech Clip R35!
Thanks Helmi
Working perfectly with VC 1.6 as well.
I know I speak for everyone with an Apache when I say that we are eagerly awaiting your next custom rom!
working with cario scala 500. Good range too, a lot better than ms stack.
Hmmm... I get an "BT Radio failed to turn on due to Insufficient driver memory available..." error on a Vanilla AKU3.5 rom (helmi's own vanilla rom). I've got nothing else installed, it's clean...
Strange, does anyone know what to do?
TIA!
hi
please can somebody post the link where can i get the ActivateMSBT.CAB
thanks so lot
regards
nusy
2marianna: download files from first post
Do we install your Bluetooth stack AS WELL AS uninstall the current MS Stack? Or is it OK to leave the MS one installed? Thanks
helmi_c
I have a ppc 6700 running your AKU 3.3. Installed the unsigned BT stack, reset. Program icons all loaded. Tried to start BT, Blue LED flashed once then I got the BTTrayCE error message "BT Radio failed to turn on due to Insufficient driver memory available..." I reset again, same thing happens again...
Hi Guys,
Hope someone can help me with this one (apologies if I'll use incorrect terms, but I'm a newbie).
I have a Qtek 9090 with WM2003SE installed (ROM 1.40.04 and Radio 1.12.0) with Bluetooth Broadcom 1.0.0 build 3900.
I'm trying to use a Metasystem Metablue BT car kit, but after succesful pairing Qtek9090 cannot find any available service.
Dangaard is telling me that the problem is with the fact that both handsfree and headset profiles are needed and this is not supported in WM2003SE; only in WM5...
I'm basically stuck, as I do not know 1) if WM5 can be installed on my Qtek9090 (and if so, how?); 2) if the problem would then be fixed; 3) if there is any quicker solution to the problem.
Would appreciate any suggestion you guys might have on the matter!!!
Many many thanks!
Regards
Dude, read the wiki.
It explains how to prepare your PDA to use WM5, and how to load it.
Thanks SandStorm,
I did forget to mention I had a look at the wiki, but it is still unclear to me if WM5 will solve my problem with the bluetooth profiles and will therefore worth the risk of messing up with rom files.
I do have also questions on the WM5 upgrade procedure, but will post them in the appropriate thread.
Many thanks
Cheers!
Problem solved upgrading to WM5.
Thanks
Regards
To all, I`ve just updated my Artemis with WM6, now I`ve the following problem. When the Artemis is connected via bluetooth with my car handsfree unit, there is no sound output form Tom Tom. If I swich of the bluetooth connection ist works. But that can`t be the solution, because with WM5 it was working.
Thank`s for your help
Did you have the BTAudio installed to get this working prior to the upgrade to WM6? - Mike
mikealder said:
Did you have the BTAudio installed to get this working prior to the upgrade to WM6? - Mike
Click to expand...
Click to collapse
No, were do I get BT Audio ?? Isn`t it part of the update ??
Does anyone know how to make the Broadcomm/Widcomm bluetooth stack work under WM6.5 (I am getting this under build 23518, and haven't tried any other versions of WM6.5, device is Asus A626 pocket pc)? I keep getting message in both the settings manager and the initial bluetooth manager about a missing component or resource. What component could it be referencing, and how can I fix it?
Steven855 said:
Does anyone know how to make the Broadcomm/Widcomm bluetooth stack work under WM6.5 (I am getting this under build 23518, and haven't tried any other versions of WM6.5, device is Asus A626 pocket pc)? I keep getting message in both the settings manager and the initial bluetooth manager about a missing component or resource. What component could it be referencing, and how can I fix it?
Click to expand...
Click to collapse
Define the ver of your broadcomm. Normally my old stack (original) from wm6.0 works without issues in 6.5 builds. It's 1.7.1.9701 as far as I remember
AndrewSh said:
Define the ver of your broadcomm. Normally my old stack (original) from wm6.0 works without issues in 6.5 builds. It's 1.7.1.9701 as far as I remember
Click to expand...
Click to collapse
Andrey, any ideas to make it universal for devices with msstack?
Getting no sound and no touch after installing.
heineken78 said:
Andrey, any ideas to make it universal for devices with msstack?
Getting no sound and no touch after installing.
Click to expand...
Click to collapse
You mean - to make my stack applicable for BT MS devices? No, that does not work. It's OEM hardware driver.
spasibo
AndrewSh said:
Define the ver of your broadcomm. Normally my old stack (original) from wm6.0 works without issues in 6.5 builds. It's 1.7.1.9701 as far as I remember
Click to expand...
Click to collapse
The version of the Broadcom stack that I have is version 1.8.0 build 4800.
Steven855 said:
The version of the Broadcom stack that I have is version 1.8.0 build 4800.
Click to expand...
Click to collapse
Upload your BT OEM Package - I will have a look. I will run it on my device and try fix if it does not work (hopefully but not for sure )
can any1 make 1 widcomm bt stack for htc touch pro? im using energy rom 6.5.3.
i need it cos the bt headset that i bought(SE mw600) communicate with this bt stack for caller name and song title.
appreciate all help..
Thanx