I had this working yesterday however just exchanged my phone and reloaded everything. the connection times out on pocket ie and when i simply go to the web address in another browser it says cingular video is only available on certain 3g phones.
I was using it yesterday even though i am not in a 3g area, but i am in an edge area. does someone think i have a connection issue. i am using the default from black 2.5 medianet connection with wap.cingular as acesspoint. Anyone else with this issue. I put to constantly stay connected to medianet in htctweak but that did not resolve the issue.
i asked in the black 2.5 thread but i did not get a response. by the way the enable disable proxy button doesn't seem to do anything to change it.
I can connect to medianet am xm radio mobile. I appreciate anyones help.
EDIT: SORRY THIS IS ACTUALLY AN OUTAGE IN MY AREA VERY SORRY FOR THE THREAD. MODS PLEASE DELETE
Related
I have been trying to login Messenger Live with Wifi...but it always use gprs instead when my connection is active...
and even my gprs is on...its times out..saying that i need to find a place for better connection and so on..
but why it doesnt connect directly using wifi??
Is there a way to fix the issue? it never happen with wm5's msn
Thanks again
Mike
when the gprs bubble pops up... press cancel.
then it uses wifi. problem fixed. why it tries gprs by default i would assume is due to mobile.
once i cancel works perfect over wifi until i move out of range.
I'm using Black 2.0 and changed the connection settings to 'Work network' (settings-connections-connection-advanced-select networks-my work networks) now I dont get the annoying gprs connection trying to start, just uses the wifi I have set up. Let me know how that goes.
dear all...thanks for the great help
falum...i did ur setup and i dont have the gprs pop up again...many thanks
but the other issues comes in...it often say that i cannot connect..(even when i was on gprs)...do you have the same problem beforee??
Im using the live version that is cracked (no time limited) that i download from here..im really confuse to which version i should get (since some said it expired)...
if its possible...can you direct me to the thread to the correct one??
Thanks again!
Mike
I'm sure I've seen a setting that says something like "allow calls when data connected". I'm sure I used to be able to make calls when I had a 3g/hsdpa connection but since upgrading from Black 2.5 to 3.0, it doesn't seem to allow this any more.
Does anyone recognise the setting that I've inaccurately defined?
Unless I'm mistaken, when on a 3G network voice and data co-exist automatically.
What you may be referring to is a ck box when setting up AS to allow an internet connection to for MMS and VOIP.
Yep, That happens to me. I am just waiting for JJ's new rom and see what happens. 2.5 was working great for me but 3.0 amd 3.0.1 both have Bletooth issues and loose Data connections
Thanks to Mr DSL..check this out for all your cingy Needs
New Cingular Data Install cabs for your WM6 ROM
--------------------------------------------------------------------------------
Due to the obvious confusion with data settings and Cingular users I want to get this taken care of. I know theres a .cab floating around for this already but its already know that it doesn't store the username/password sometimes and it also seems to have a problem with some users keeping a exchange connection for whatever reason.
This has went much better then I thought and I would like to give a big thanks shogunmark and wpbear for making the .cabs for all of us to use. Much appreciated
I have at least loaded each of these up on a fresh WM6 ROM and they all seem to work fine so hopefully some more users will test them out.
The first download will load up the default Cingular MediaNet/ My ISP WAP MMS Settings and of course MediaNet will be the default.
The second download will load up The same settings except My ISP WAP will be the default connection instead of MediaNet
The third download is basicly the same as the second one but is for those who have the PDA data plan and want to use isp.cingular/[email protected] instead of wap.cingular/[email protected]
As of a few days ago my EDGE/3G connection stopped connecting. All the settings are correct, even re-entered them manually a few times, still get the 'cannot connect' error, even though signal strength is more than adequate.
Even stranger, however, is when I use a .cab to automatically inject the settings everything works fine for a matter of minutes, then the connection problems resume.
Running CUSTEL's 2.5, problem started a couple weeks after the flash, and the only thing I have installed since is the Palm Threader, which makes no sense that it would be the culprit.
So this is not a WM6 issue correct? Its an issue with you messing up your connection settings... WRONG THREAD
Pardon me, it is not an issue with my settings, as I said in the first post even if I use a Settings Cab to inject them the data connection still quits after a few minutes even if i have not changed any settings. This never happend with WM5 and it is the first time it's happened with WM6, I would take it into a Cingular store, but I'm concerned the reps would see WM6 and just nullify any support.
Need more info to diagnose. What apps are you experiencing the problem in? Which cingular plan are you on? Which cab did you use to inject the settings.
There is some problem with the lastest wm6 roms for using cingular and pie if you are on the isp plan. Make sure your DNS is hard coded and it will fix it if its the same problem. Seach the forums and like most probs you will find your answer.
connection problems
just to let you know I have been having trouble connecting I connect and then get kicked off I had to use the isp connection settings my friend works for them and he told me it had to do with towers and the cingular and att thing
Edge and 3G
cingy had issues today had the same issue earlier all better now
yeah pure data access seems to be going alright, but for some bizarre reason i can't send/receive email without a synch error (will have to see if this relates to the Palm SMS Threader app though).
thanks guys.
Hey all,
My TP2 no longer works on internet or email using wifi. 3G, etc is fine, but when wifi is turned on, it will not open a page. Tried Opera and IE. On email I get a sync error unless the 'Data' connection slider is 'On.'
What settings am I supposed to see in the connections section? I must have changed something without knowing. Tried searching a couple of forums, but I think I'm the only one with this situation. Hopefully it's something silly and I'll pop myself in the forehead for not figuring it out...
Thanks for the assist,
OZ
me too...
just thought i'd let u know you are not the only one with the wifi problem. i will let you know if i find a fix...
I have a Tilt2 and have the same problem. It connects to a wifi network but then won't actually pass any data back and forth (even the Data Connection switch in "Communications" is greyed out). Frustrating. Any ideas?
I searched through these forums and I could not find an answer, so if I missed it, just let me know. I am curious if anybody knows how to solve this problem. I live in a small town that is on the At&t's Edge network, and I commute to a larger city with At&t's 3G/Hspda network.
Whenever the phone transitions from E to H networks, the data connection will not work. I activate Opera or do the weather update on the home screen and a message pops up saying that it cannot connect. Now, if I do a soft reset, it works perfectly. It never disconnects or gives me any problem. Also, when I return to the E signal, it switches over perfectly with absolutely no need for a reset. It started this when I installed the new Tilt2 rom from the HTC website. I have installed Net 3.5, jh2001 data speed fix, the advanced config tool, and have properly set up the required options on the config tool and under settings->connections->advanced network. If necessary, I have never changed the radio.
Has anybody else run into this problem or know of a fix? Thanks in advance.