Hello everyone,
I need help, my asus P525 is having problem everytime it comes out of sleep, it wont recognise the minisd card until i eject the card and re-insert it again. any ideas will pretty much appreciated.
I am using the latest firmware WWE 3.43, any idea where i can download and re-install a previous firmware?? may be it will solve my problem...
THanks a lot guys,
Teu
ftp://dlsvr05.asus.com/pub/ASUS/IA/P525/P525_V3320_WWE2nd.zip
Good luck mate.
Hi User22
Thank you very much for your help, and i will download and install this with fingers crossed
thank you once again!
Wel yea i downloaded and installed but with no success still have to eject and insert the card everytime it comes out of sleep any other suggestion s apart from throwing it outside???
Thank you!
yo m8.
back up and then formate the memory card with sktools.
be sure not to use memorycard speedup hack.
give me feedback.
PPC-DOC
ASUS p525
4gb mini sd
iblue 737 gps
OFF TOPIC
Hey doc,
do you have any problem with your 4 GB minisd? ,because i allready replaced mine with a new one (because it was corrupting and deleting data/folders) but didn't try it yet.
Any suggestion on formating?
User22
i notice that the memory get correpted too.i format my minisd every couple of weeks.
i am getting new one now.
i saw HKEY_LOCAL_MACHINE\Drivers\BuitIn\SDHC
an i notice that my sd is not SDHC(nothing is writen on it ,HC or something else).
if some one got SDHC on asus p525 , please let me know to buy 4 gb SDHC.
Hi there, Let me tell you the full story:
-First 4gb mem was a noemal one that been corrupting/deleting data from time to time, so i exchanged it on warranty.
-Second one was doing the same so i sent it back for reimboursement
-Also i have a 4gb minisdhc BUT IT CAN'T WORK on our Asus.
So mate, forget about any 4gb mem by now.
Related
Hi everyone,
I really need help.... I have an spv m5000 and a 1 gb kingston sd card wich works perfectly on my mp3 player ( I can read, upload and erase files). the thing is that in the spv I can read but I can't upload nor erase files.
I have already format the card and still the same problem
Any suggestion, any idea ??
thanks a lot
Rodrigo
Is the little lock switch on the card itself (usually on the left side as you look at the front) set in the lock position? That would allow you to read without being able to modify files.
On my Transcend card the switch is locked when it is in the down position, and unlocked when it is up.
I hope that helps, that's the only thing I can think of right off.
Thanks you for that ...but I've have try the upper possition, the lower postion and the middle (almost SD card Kama sutra ) possition and still not working.
anyway thanks for the tip
rodrigo said:
Hi everyone,
I really need help.... I have an spv m5000 and a 1 gb kingston sd card wich works perfectly on my mp3 player ( I can read, upload and erase files). the thing is that in the spv I can read but I can't upload nor erase files.
I have already format the card and still the same problem
Any suggestion, any idea ??
thanks a lot
Rodrigo
Click to expand...
Click to collapse
What did you use to format the SD Card? Your computer or the Universal itself?
You can try and install WM5torage, an application that would allow you to view the SD Card while still in the Universal as a drive. Activate WM5torage and connect it via USB, then try "quick format" the SD Card this way.
Solved
Thank you so much for the wm5torage...... that solve the problem with out format
thanks again
Rodrigo
hello everyone
i'm using a 4gb sandisk mini sdhc with my trinity, and the rom is "v3.00.07.09 PDAVIET". there are lots of problem on this combination, the biggest one is that i cannot find anything after i open a folder!!!(for example, clike storage card->progame files-> you find nothing there!!! but after one soft reset, the system runs well in about 10-20 minutes, then same problem again.)
is this a bug of the rom? or does the problem comes from this sdhc card? anybody know how to fix it? thanks
Hi there... I've got the same problem with all the wm6 "flavours" I've tested so far.
I've narrowed the problem down (in my case) to the way the device was being powered down... If I just let it by itself so that it powers down own its own when I power it back on everything is OK with the memory stick. All the folders and their contents are there.
In the other hand, if I press the power button so that the device powers down (what I usually do to save battery switching off the screen etc and keeping the phone functions on) whenever I power it back on all the memory card contents are either gone (can't see them on the file manager) or otherwise corrupt, showing as garbled characters sometimes or just showing empty folders.
As for now I'm waiting for Mun's next ROM to give wm6 another try... but if the problem persist I'll have to stick to WM5 (sadly missing the HTC Home Plugging which is wm6 only).
Best,
M Addario
what language do u use in your wm6?
i just find that, a english rom without any other language plug-in, the rom will be stable with this 4gb sdhc. hope this can help u 2. cheers.
addario said:
Hi there... I've got the same problem with all the wm6 "flavours" I've tested so far.
I've narrowed the problem down (in my case) to the way the device was being powered down... If I just let it by itself so that it powers down own its own when I power it back on everything is OK with the memory stick. All the folders and their contents are there.
In the other hand, if I press the power button so that the device powers down (what I usually do to save battery switching off the screen etc and keeping the phone functions on) whenever I power it back on all the memory card contents are either gone (can't see them on the file manager) or otherwise corrupt, showing as garbled characters sometimes or just showing empty folders.
As for now I'm waiting for Mun's next ROM to give wm6 another try... but if the problem persist I'll have to stick to WM5 (sadly missing the HTC Home Plugging which is wm6 only).
Best,
M Addario
Click to expand...
Click to collapse
sailer1983 said:
i just find that, a english rom without any other language plug-in, the rom will be stable with this 4gb sdhc. hope this can help u 2. cheers.
Click to expand...
Click to collapse
hi
what is the manufacture of ur card : sandisk, transcend,...?
thnx
sandisk
it is sandisk mini sdhc.
donzee said:
hi
what is the manufacture of ur card : sandisk, transcend,...?
thnx
Click to expand...
Click to collapse
Hello, i use a Transcend 4GB SDHC (class 2) card and have no problems at all with ax3l wm6 rom 2.0.8
under wm5 the card didnot work correctly
My Transcend 4GB SDHC works fine too.
i'm just testing 4gb Transcend classe4 SDHC an no problem
I'm using Sandisk MiniSDHC 4 Gb and tested many WM5-6 roms.
Every rom worked properly with the card.
some software make system unstable.
hi everyone, i just find where the problem comes. some software, like ce-star(this software enable your system display asian language) can make rom unstable. the problem will go as long as you uninstall that software!
Guess the answer is somewhere, perhaps someone can point me in the right direction, how do you upgrade an Orbit to take an 8gb memory card? Thanks.
Get the SDHC patch, install it, soft reset and then insert the card. If you use the search function or look through the first two or three pages of the Artemis sub-forums you'll notice that you are not the first that asked this question
Flashed mine with Meschle Touch flash and bought an 8 GB Sandisk microSD, working perfectly.
I bought a Sandisk 8gb MICROSDHC card for my phone but the phone refuses to work with it. I've tried flasing my Orbit today which is on WM5 btw with the SDHC_WM6WM5.zip from this web-site but I'm having no luck. I can run the two cab files which look like there doing something, I then reboot the phone but still the phone does not see the memory card. The Windows folder within the SDHC_WM6WM5.zip has two files in there one called sdbus.dll and sdmemory.dll. According the the txt file within the zip file I am supposed to extract both the files to my windows directory on the main memory of the phone but unfortunately I cannot because on one of the files the SDBUS.DLL it complains of it being used by the system. I've tried reboots on the phone, factory defaulted it back, safe mode (kicking it), but still no joy.
PLEASE CAN ANYONE HELP!!
Use this file: http://members.cable24.at/immogroup/HTC-P3300/SDHC-Artemis.cab and then soft reset.
If you ever upgrade your firmware be sure to take out the SDHC card - otherwise it won't even go to bootloader correctly.
Thanks for the link Registerme it's all sorted now.
upgrade to 8gb
hi i have read many comments about using this link;
http://members.cable24.at/immogroup/...HTC-Artemis.cab
i have clicked this link on my computer and it says "error on site"
i am not very clever with technical stuff and i would really like to know how you could upgrade to an 8gb card.... please could someone help me??
regards;
hello12345
here ya go
Thanks very much for this I can now put my tunes on the phone without removing my maps and charts
Have just successfully updated to my very first ROM ! Yay me !
MR Vanx's instructions worked a treat.
I have a small problem since the upgrade and I am hoping someone can help me please ?
I can't see my storage card anymore. It worked 100% error free in WM5. I did the upgrade to the ROM without the card in the phone so as to make sure I didn't loose anything. Now I can't see it !
HELP Someone.
Dave
Same here, it happened to me too. I went back to my official Orange WM5 rom, and then moved up to PAY's WM6.1 rom. So that makes two people who had SD card trouble with Schap's WM6 4.31 !!!
PS. Tried my card in my friends phone (same as mine) who is running 3.30c and it worked fine. Guess it must be something in 4.31 ?
I ran 4.31 with both a 2gb and an 8gb microSD/microSDHC card without problems with tons of apps installed on the cards.
Well its been an issue with some people and not with others. There is a whole long thread here http://forum.xda-developers.com/showthread.php?p=1908699#post1908699
I get problems with Schap's 4.31 and not with any other ROM so atleast for me that ROM is the problem.
Shoaibz said:
Well its been an issue with some people and not with others. There is a whole long thread here http://forum.xda-developers.com/showthread.php?p=1908699#post1908699
I get problems with Schap's 4.31 and not with any other ROM so atleast for me that ROM is the problem.
Click to expand...
Click to collapse
I tried with a lot of different sd cards (1gb till 6gb) without any problem on 4.31. Do you have extended rom visible? If yes, your card could be not visible. Try also to add a "My Document" directory on the card. Do not ask me why but it can help. And... but i suppose you tried already: soft reset after installing the card.
My 2 cents
Bergerac56 said:
I tried with a lot of different sd cards (1gb till 6gb) without any problem on 4.31. Do you have extended rom visible? If yes, your card could be not visible. Try also to add a "My Document" directory on the card. Do not ask me why but it can help. And... but i suppose you tried already: soft reset after installing the card.
My 2 cents
Click to expand...
Click to collapse
Done all what you've said and much more to the point of buying various cards of different make, but nothing works !!!
I have been running 4.31 for awhile and haven't seen any problems.
You mentioned that you took the card out while flashing. Have you tried to flash again with the card in? It shouldn't have any effect to the data on the card. Of course now that i've said that, it will probably wipe it clean, so you better back it up(usb card reader works great)
You could also try wm5torage, it's a long shot, but maybe it would wake something up.
Good luck anyways.
I had this problem once. Check to see if there is a 'Storage Card' directory present when the card is out of your phone. If there is one, when the card is inserted it creates a "Storage Card2" directory that does not work properly with windows.
Eject the card and remove the directory. Soft reset and try again.
Thanks for the input guys. Very impressed with the fast response.
I have tried a couple of things suggested already and the others have made no difference.
Not a problem. I think i will just flash a different version of the Schaps ROM for now and see how I get on.
Well, for those interested I flashed 3.30c and still had the same issue. My friends card worked in my phone and mine in his. I backed my card up using my pc and a card reader. I re-formatted th card and the phone then saw it !!
I did however notice that it was a little flaky but found if I pushed the card up slightly using my finger nail on the back side the contacts made better connection and it stayed.
Then came my moment of pure and utter genius ... I decided to try to bend the card slightly to get the cards contacts to make better connection.
Thats right you read correctly, I bent the card, in fact what actually happened was that I snapped the card !! DOH !!!!
Oh well. Guess I am in the market for a new card.
Is 2GB my limit or can 4GB work ?
dmj1973 said:
Thats right you read correctly, I bent the card, in fact what actually happened was that I snapped the card !! DOH !!!!
Oh well. Guess I am in the market for a new card.
Is 2GB my limit or can 4GB work ?
Click to expand...
Click to collapse
I hate it when that happens.
Anyway, WM5 = SD card = 2 gig per the spec
WM6 = SDHC card = 32 gig per the spec
I've got a 4 gig in mine, working fine, phone sees the entire card
Thanks for the info and for not laughing at my stupidity !
Appreciate it.
dmj1973 said:
Thanks for the info and for not laughing at my stupidity !
Appreciate it.
Click to expand...
Click to collapse
If I had laughed, it would have been in sympathy, as well as at myself. I've done boneheaded things such as that before!
What formatt is the sd card? FAT32, FAT??
I formatted it FAT.
I just feel so silly for doing something so stupid !
Just popped in my new 6gb SDHC card and it is working sweet as a nut.
Sandisk one btw.
Hi there.
I'm having a very strange problem and could not solve it so far.
I have a T-mobile MDA III. When I wanted to install a new 4GB micro SDHC, I downloaded the patch, ran it on my MDA, rebooted, inserted the memory and it all worked perfectly.
Then I got an HTC P3300 (for spare) and wanted to do the same. Installed the patch, rebooted, inserted the memory... but the phone does not recognise it.
I than ran the "go back", rebooted, inserted the old 2GB memory but now the phone no longer recognises it.
So, the MDA works ok with 4GB memory.
P3300 does not recognise 4GB memory and after "going back" does not recognise 2GB memory.
Without memory the P3300 is pretty much useless.
Can anyone please shed some light on this, please....
Thanks.
http://forum.xda-developers.com/showthread.php?t=345038
braulio_holtz said:
http://forum.xda-developers.com/showthread.php?t=345038
Click to expand...
Click to collapse
This is precisely where I got the .cab's.
And in my MDA everything works fine.
On the P3300 the 4GB memory is not recognised.
And after installing 'back2original', no memory at all is reconised, not even the 2 GB microSD (not SDHC) that I used before.
One more detail:
on MDA I have WM6
on P3300 I have WM5
Is there something specific to WM5 to teawk about?
Thanks.
...
my advice is to try flashing to a differant rom..
with a few roms i too have not been able to access my memory card..
just flash to something else
click on my signature for Uspl 1.11.cmon
youl need that to flash roms
raving_nanza said:
my advice is to try flashing to a differant rom..
with a few roms i too have not been able to access my memory card..
just flash to something else
click on my signature for Uspl 1.11.cmon
youl need that to flash roms
Click to expand...
Click to collapse
Yeah, I fear that's the only solution.
(btw, why old 2Gb sd cannot be accessed? what happened?)
I've been looking for the official WM6 rom from HTC but it no longer is on the site. Where can I find it?
...
wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
raving_nanza said:
wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
Click to expand...
Click to collapse
Thanks.
PS - Links to originals are broken, like a number of others.
Have you tried reading the card on the PC? See how it's partitioned and what kind of partition it is. Usually, you should use FAT.
I had this issue before (on my Polaris) and a format helped.
NeoS2007 said:
Have you tried reading the card on the PC? See how it's partitioned and what kind of partition it is. Usually, you should use FAT.
I had this issue before (on my Polaris) and a format helped.
Click to expand...
Click to collapse
The microSDHC was (is) formated FAT32 with only one partition. On the PC it worked fine.
Anyway, I flashed a ROM (could not find HTC original WM6 though...), applied the patch and now the 4Gb micro SDHC is working.
Still, I could not explain why, in the first try, the old 2Gb microSD stopped working.
I recon it's working now?
NeoS2007 said:
I recon it's working now?
Click to expand...
Click to collapse
Yep... but it was a real pain in the royal a**...