SD Card uploading problem - JASJAR, XDA Exec, MDA Pro Software Upgrading

Hi everyone,
I really need help.... I have an spv m5000 and a 1 gb kingston sd card wich works perfectly on my mp3 player ( I can read, upload and erase files). the thing is that in the spv I can read but I can't upload nor erase files.
I have already format the card and still the same problem
Any suggestion, any idea ??
thanks a lot
Rodrigo

Is the little lock switch on the card itself (usually on the left side as you look at the front) set in the lock position? That would allow you to read without being able to modify files.
On my Transcend card the switch is locked when it is in the down position, and unlocked when it is up.
I hope that helps, that's the only thing I can think of right off.

Thanks you for that ...but I've have try the upper possition, the lower postion and the middle (almost SD card Kama sutra ) possition and still not working.
anyway thanks for the tip

rodrigo said:
Hi everyone,
I really need help.... I have an spv m5000 and a 1 gb kingston sd card wich works perfectly on my mp3 player ( I can read, upload and erase files). the thing is that in the spv I can read but I can't upload nor erase files.
I have already format the card and still the same problem
Any suggestion, any idea ??
thanks a lot
Rodrigo
Click to expand...
Click to collapse
What did you use to format the SD Card? Your computer or the Universal itself?
You can try and install WM5torage, an application that would allow you to view the SD Card while still in the Universal as a drive. Activate WM5torage and connect it via USB, then try "quick format" the SD Card this way.

Solved
Thank you so much for the wm5torage...... that solve the problem with out format
thanks again
Rodrigo

Related

SD Card not detected

I am using O2 XDA IIs PPC 2003 SE.
Now when I insert my SD Card 2 GB, the OS does not recognize it.
(It was good before.)
I've tried with another 256 SD Card, same result.
Those SD Cards are working well with my Card Reader plugged into my PC.
Anyone could help me please?
Thanks in advance.
I'm sorry I don't know.
However.. you've come to the wrong place if you want help.. people here seem to have an aversion to actually helping people out.. don't get me wrong, there are some very talented people that call this forum 'base', but they are understandably busy.. and the other's who hang just don't answer **** unless it suits them..
You are more likely to get the answer "read the wiki" which isn't the most helpful thing in the world. Even those of us who try others to help despite our knowledge being somewhat wanting.. just in the hopes of being seen to be at least trying, aren't deemed to be worth giving an answer to.
I suggest these two forums.
http://www.ipmart-forum.com/index.php
http://www.totalpda.co.uk/forum/
You will get help there.
Try soft resetting the device, poke the stylus in the reset hole and once the device re-boots it should see the card, you will not loose information performing a soft reset - Mike
thanks guys.
Hi, I've also have a sort of problem like yours. I tried soft reset n it actually works. But sometimes my BA still can't read my SD. I've tried format my SD n even upgrade my ROM. It seems that the problem is in hardware. I don't know what to do anymore
U have probably what I also have.. a faulty SD card reader or a bad soldering (welding)...
Last night I dissambled my BA n I found out that the screws around SD card reader were loose. I've tightened them up n so far I don't have any problem with SD card. But I've still exprerienced problem with my screen keep active when my BA was pressed even though I've locked the device n power off. I don't know what to do anymore. Any suggestion?
Problem already solved.
It was because tiny plastic dirts on the SD slot.
Once I cleaned it up, it's working as before.
Thanks to you all. What a nice forum we have here.
I had similar problems with a 1GB card. Formatting it in a PC-based card reader fixed it. Remember not to select quick format.
Can I put a 4GB SD Card in the Blue Angel? Will it work?
noone85 said:
Can I put a 4GB SD Card in the Blue Angel? Will it work?
Click to expand...
Click to collapse
It will work if the card is *NOT* a SDHC card.
I found my 4 gig card on ebay, topram is the brand, and it works fine as it is a non-SDHC card.
Sdcard not reconized
HI TO ALL..
I had installed miopocket 4.0 on my VDO Dayton PNA6000-WINCE 5 but
because of problems with Garmin XT I had to uninstall but the uninstall
did not do the best for me, now my SD slot dont read any sdcard i think
its corrupted registry and i dont have access to usb active sync only
have MTP (Media Transfer Protocol) when i connect to usb(no data
transfer). How can i access my resident flash(INTERNAL MEMORY) to edit
registry,change usb mode to activesync or something else???, i think sdmemory.dll is making
load problems.
Tnx in advance!
To have access to registry use TotalCommander or SKTools
but i dont have access to system, sdslot is not functional and i cant install active sync driver just mtu in device manager..

SD card Problems 4GB SD

Hi there im fairly new to the phone unlocking and mod scene but have managed to sucsessfully do the chamer and phrophet. upgraded unlocked and customze.
now the problem i have is i cant get my 4 gb sd card to work in my phone ?
its fat 32 formated works on my laptop but the phone won't recognise it?
Is there a program or patch to make larger card work on the phone?
Many thanks for any help.
Regards
Shaun
Done
Silly me run active sync and it detects the card? wish i had the operation manual lol

SanDisk 2GB Memory Card Problem

I was using it pretty good and suddenly my memory card appear and disappear when ever i reset my ppc. Now, i cant detect it anymore on my dopod 838 pro. Any idea or comments i can do to verify that the memory card is the problem (if it is still alive?) really need some advise and thanks in advance!
gerald20000 said:
I was using it pretty good and suddenly my memory card appear and disappear when ever i reset my ppc. Now, i cant detect it anymore on my dopod 838 pro. Any idea or comments i can do to verify that the memory card is the problem (if it is still alive?) really need some advise and thanks in advance!
Click to expand...
Click to collapse
Pull the card out and pop it in a Normal PC Card reader and see if you can see the contents. For some reason PPC's will occasionally corrupt the formatting of the card to majke it unreadable to it but PC's sometimes can. If you can read it with a PC, then copy the contents off, reformat usign the PC and copy the contents back and try it in the PPC again.
ok will do that. but isnt that dangerous to lose data tat way? also, when i could read the memory card, the folders r there but the files r gone. possible virus?
i can find my memory card on the card reader. i tried formatting it but it gave me an error "Window is unable to complete the format". What is wrong?
Were you able to copy your info off of the card? How were you trying to format it?
Make sure that you DON'T have a window to the card open when trying to format.
HELP ME WITH ADVISE!
My problem is back again. My data at certain folder in the memory card is disappeared but still able to browse the memory card. Then i soft-reset a couple of times and the data comes back. It took the dopod 838 pro to read the memory card very long time b4 able to show the data on the card.
What should i do?
Check the registry key HKEY_LOCAL_MACHINE\System\StorageManager. There are two DWORD values - PNPUnloadDelay and PNPWaitIODelay. If they are not set to 8196 - do that.
its 8196 as posted...
Looks to me like 2 possibilities:
Your SD Card is shot; or
Your phone has lost the plot.
If it reads OK on the PC card reader, the card is probably OK.
I'd try a hard reset of the phone first. (Make sure you have backed up everything first.)
Also, clean the SD slot as best you can to make sure there are no biscuit crumbs or old socks fallen into the hole.
gerald20000 said:
i can find my memory card on the card reader. i tried formatting it but it gave me an error "Window is unable to complete the format". What is wrong?
Click to expand...
Click to collapse
Seems like some problems with this card. You didn't try another one?

SD Card died?!

Hi all!
Today afternoon, i wanted to start tcpmp, and it said, that "player.exe bla bla can not be found..." okay, i removed and plugged in the card again - same issue.Soft reset - didn't help.I even can't see the card in total commander on my uni. I attached the card to my pc, and it says (i am using a hungarian OS, i'll try to translate the error message) : Card can not be read because of an I/O error. I can't even format it... However, i saw that the "encryption" box in the settings (on the uni) is checked, and i can't uncheck it! This might be the problem? Please help!
(I am using THING v4.1-WM6.1 and a 2GB Panasonic SD card-!NOT SDHC!)
Thanks!
I've got a similar problem. Today my XDA won't read my SD Card. But my PC can read it no problem, suggesting the problem is not with the card itself.
I've got tha problem!
Hi!
I think i know the problem... In storage settings i had to set it to SD only mode (i don't know yet that my SD is working, i'm not at home) but my 256MB nokia rs mmc did the same, then i set it to sd only mode, and now it works! I hope my SD will work too, i don't want to throw it to the trash

[Q] need help my sd card is not mounted!

i have installed almost 10 different new rom but with all of them, i cannot see my sdcard.and with original stockrom it is working!
my sdcard i a samsung 32 go class10
Iam totaly lost.
thank for your help
you need to test the card in a card reader i think , to find whats faulty
you are ware wrong my sd-card is perfect!
mehdox said:
you are ware wrong my sd-card is perfect!
Click to expand...
Click to collapse
or your phone's sd reader chip thingy is broken somehow? if your pc can detect it, but your phone cant, it is mostly related to be more a phone problem than a sd card one.
backup all of your data on your sd to your pc, and than format it.
put it in your phone again, and if it still doesn't connect, there might be a problem

Categories

Resources