Freeze when writing - 8525, TyTN, MDA Vario II, JasJam ROM Development

In all roms after i install Portuguese dic and autocorrect :
Sometimes when i wrinting a message it freezes.
No Matter is the frist or last letter of the word
Any one experiencid this ?
Solutions ?

I had the same problem also. Here is the fix.
I posted several times looking for a answer, but never got one. So since figured it out, i'd thought i'd share.
1. Turn on your phone ( wait for it to completely boot up.)
2. *While the phone is on* Take out the battery and leave it out for *30+ seconds, I waited 40 sec.
3. Then turn your phone back on and see if it fixed it.
I had this problem for a 2 months, I could barely type a message,

doing it now , lets see,.....

Related

Dialing with keyboard problem

Hi to all,
We all have the reflex to dial numbers with the keyb if we don't have it stored on memory.
Well, when I do that the Hermes freezes and become very unstable.
I have the last LSVW version and the spanish cab keyb installed.
I remember that I could do that with WM 5 without any problem and the keyb even toggled by itself to numbers when open it.
Any report or fix on that ?
Possible solution
turn phone on, wait till it boots to today screen,
1. Take off batter cover and take out battery, while the phone is still on.
2. Wait 40 secs
3. Put battery back in and turn phone back on.
4 See if that helps
Romeo36099 said:
turn phone on, wait till it boots to today screen,
1. Take off batter cover and take out battery, while the phone is still on.
2. Wait 40 secs
3. Put battery back in and turn phone back on.
4 See if that helps
Click to expand...
Click to collapse
Nop, same problem...
I was going to say thats not going to do crap... if i soft reset doesn't help your next best bet is to hard reset and then before loading any apps on see if your issue is gone. if it is slowely start loading your apps on and see if it still works one by one until you find the app thats causing the lock up.

Artemis crashes - battery problem?

Hi,
My Artemis is running Meschle's Touch 4.02 WWE for a long time now.
A couple of months ago it started to crash, apparently randomly. It started after I installed auto-hibernate, but this could be a coincidence.
What happens most of the time is that the screen is turning black (fades away), starting from the bottom. Sometimes it just gets stuck on the home or other window or it soft resets automatically. I also got twice a white screen that said: 'reset due to sudden power loss'. Soft resets sometimes work, sometimes it gets stuck on the boot screen. I did several hard-resets with no luck.
I am trying for a long time to figure out a pattern. Maybe it has to do with the radio consuming too much power? Upgraded to 03.21.90: same problem.
Last two crashes happened while trying to start Opera mini.
After a crash the clock is wrong (the time of the crash the clock stopped).
It seems to happen more often while charging.
I've changed the battery: it seemed to be better for a while (two weeks) but then it started again.
I've disabled everything, leaving only the phone (no data, no HTC home, ....) but still the phone crashes from time to time (sometimes every hour, sometimes every 5 mins, .....).
Battery status indicates some weird things too: after charging up to i.e. 35% then soft reset batt status indicated 58%...or batt status is 30% then 2 mins later status is 2%. The OMAP function is turned off, because sometimes while booting the cpu is stuck on a very low frequency (screen flickering, very slow boot, ...).
I've tried to flash with another rom (original HTC) but I get: 'update utility not for this device' or something similar. I've tried several RUU's en always USPL.
Does any of this make sense to anyone? Any suggestions? Thanks in advance.
I have exactly the same problem. Think solved from 2 days. Changed the SD card i have 2 one 2 gigs and one 1 gigs the problem was with the 2 gigs card. Try to backup your data and format the card.
bobybravo said:
I have exactly the same problem. Think solved from 2 days. Changed the SD card i have 2 one 2 gigs and one 1 gigs the problem was with the 2 gigs card. Try to backup your data and format the card.
Click to expand...
Click to collapse
Thx, I'll try that. However, even when the sd card is removed the crashes occur.
Just had another crash....connected via usb to my pc: after 5 secs screen faded to black. I had to soft reset. After that some 'invisible window' was blocking the start menu. Closed it (via the close button top right) and got the start menu again. Re-connected to usb and is ok until now....
I also see 173mA of drain.
I had the same problem.............and i change back to the original swedish wm6 rom and it was better for a couple of days, then got worse started to freze fade out until one day it "died" now i can only get into bootloader but cant boot any roms not the original swedish rom (wm6) or any other rom, in boot loader it only says IPL 3.13.0001 SPL 3.13.0001 no gsm or other stuff but when conected to USB it says usb, I tried the SD flash to but no good so my sugestion it that u see to that ur device is "open spl" if it take the same route that mine did.
(i change to a brand new battery when the problem where starting but taht didnt help.....)
I guess now as i understand it my only hope is to find the original shiped rom wm 5 swedish rom?! and try if that will flash onto my device.
i hope u dont get the same problem as me.
Only problems, no solutions...
Mine (p3300; Black&Blue v5) got a new Battery, new SD-Card. Did´nt help. I removed the SD, removed SIM, loaded the battery, then turned it on again and from now on it´s sometimes booting, sometimes not. If it´s booted up (after long time lying with removed battery) it doesn´t live long enough to flash it with another (old) rom.
Now it´s lying next to me, with all this expensive accesoires, doesn´t talk to me and say what the problem is. My Provider called me and asked if I want a new one.
Again HTC? I love the functions of WM...
I have the same problem with my Dopod M700 (Love)
But mine doesn't freeze it just auto soft reset itself... i don't know whats going on... somebody please help.
Changing to different ROM doesn't solve the problems... put back the original factory ROM also doesn't help.
Here still the same problem.
I've upgraded the radio to 03.21.90: now WIFI isn't working anymore and the phone still 'crashes'. I'll change it to 03.18.90 and see what happens.
I've emptied the battery several times (until bootloader switches off) and recharged with the original AC adapter. Did a hard reset on battery 100%: problem remains.
There are several threads with the same problem. I didn't find an answer, exept maybe to replace the motherboard.
I really wonder if there's anyone who knows what is causing the problem.
It could be the graphics card (screen fading) or the battery/charge chip...no idea.
I've also noticed that when a crash occurs, it often takes some time until it boots again, as if the Artemis needs to 'cool down'.
System Crash
PeteNewt said:
Hi,
My Artemis is running Meschle's Touch 4.02 WWE for a long time now.
A couple of months ago it started to crash, apparently randomly. It started after I installed auto-hibernate, but this could be a coincidence.
What happens most of the time is that the screen is turning black (fades away), starting from the bottom. Sometimes it just gets stuck on the home or other window or it soft resets automatically. I also got twice a white screen that said: 'reset due to sudden power loss'. Soft resets sometimes work, sometimes it gets stuck on the boot screen. I did several hard-resets with no luck.
I am trying for a long time to figure out a pattern. Maybe it has to do with the radio consuming too much power? Upgraded to 03.21.90: same problem.
Last two crashes happened while trying to start Opera mini.
After a crash the clock is wrong (the time of the crash the clock stopped).
It seems to happen more often while charging.
I've changed the battery: it seemed to be better for a while (two weeks) but then it started again.
I've disabled everything, leaving only the phone (no data, no HTC home, ....) but still the phone crashes from time to time (sometimes every hour, sometimes every 5 mins, .....).
Battery status indicates some weird things too: after charging up to i.e. 35% then soft reset batt status indicated 58%...or batt status is 30% then 2 mins later status is 2%. The OMAP function is turned off, because sometimes while booting the cpu is stuck on a very low frequency (screen flickering, very slow boot, ...).
I've tried to flash with another rom (original HTC) but I get: 'update utility not for this device' or something similar. I've tried several RUU's en always USPL.
Does any of this make sense to anyone? Any suggestions? Thanks in advance.
Click to expand...
Click to collapse
I'm having exactly the same problem which happened after I upgrade from Artemis love 32 to 33.
I have tried everything mentioned here, changed th Rom 5 times, went back to the Ship Rom, but the system keep on crashing.This is the second time this is happening to my Artemis. The solution at the first time was replacing the motherboard and nothing else, as it has worked fine after that.
I posted my problem in another thread here but no solution yet. Four days back and after I got enough with it, I took my Artemis to the HTC work shop and they told me that they couldn't find the reason for the crash, and the only way to solve the problem is to replace the motherboard which will cost me too much.
Strange it happens to several phones, and more or less in the same way.
I've changed my Rom to B&B 5.0 now. Still same problem.
Wifi isn't working at all anymore: tried several radio versions, none brings back the wifi. Is this the end of my Artemis?
Me 2
Jup it happened to mine too, I returned it to the shop and when they returned it they said that they had replaced something but they couldn't tell me what It worked for a couple of months but now the same problem so it's back at the shop again... (luckily i had 2 years of warranty) So i guess it's not really a software problem.
Maart84 said:
Jup it happened to mine too, I returned it to the shop and when they returned it they said that they had replaced something but they couldn't tell me what It worked for a couple of months but now the same problem so it's back at the shop again... (luckily i had 2 years of warranty) So i guess it's not really a software problem.
Click to expand...
Click to collapse
I hope u really try to get them to awnser what they change this time and then u can tell us? who knows it might help to know that.
So...installed B&B 5.0 (thx Tom ).
I did several complete 'battery charging cycles'.
I formatted my SDHC card.
It seems to me that it crashes less now (only once yesterday, not yet today).
Wifi seems to be definitly gone.
It probably isn't SW-related, but why would it crash less now than before?
I think that the most probable cause would be the chip that handles the battery status.
Let's hope that the chip somehow got resetted with the charging cycles.
No luck....it crashed all the time yesterday.
It seems that it happens more often when it is in my pocket (temperature related?).
When it lies on the cupboard it seems that it stays ok...again very strange.
Also while charging the battery status was 48%. I removed the charger and the status jumped to 100% :s.
Does anyone know how much it costs to have the MB replaced?
MDA Compact III
Hi!
I had the same promlem with my MDA Compact III!
I think it's a hardware problem. I tried so many roms, original, and cooked too... change the battery, clean the motherboard, but didn't help.
I was nervous, take out the battery for 5sec then reinstall it and took it in the refrigerator (NOT IN THE FREEZER!!!) for about 10minutes!
The result: don't crash about 1 hour!
So i took it back for 1day. And now, it works 2weeks continously, with no crash.
But unfortunately the battery (also the new one) holds the charge only 1day.
ElVikin said:
I hope u really try to get them to awnser what they change this time and then u can tell us? who knows it might help to know that.
Click to expand...
Click to collapse
Same problem here. I called HTC, they picked up my device, replaced the inside (motherboard) I guess because my device has a different IMEI number now. Very quick service, within one week my device was at my desk again.
I had similar problems.
had my HTC repaired (new MB)
problems remained the same.
after two repairs I received a new device and even that did not solve my problems.
Up till I bought a new battery
now he is working perfect again!
Hi i have the same problem as all of you. But is there really no solution to this problem except for sending it up to HTC and let the **** be replaced?
I also have the exprience that when its in my pocket is crashes also directly. but when it's just lying on the table nothing happens.
It is now lying there for 2 days without crashing.
i flashed it back to the original ROM. but still crashes after i put it in my pocket.
when i reset it (i cannot turn it normal on with the on button) it turns back on and starts normaly. i can use it now aslong as i don't put it in my pocket.
Please will some-one help find a solution for fixen it what causes these problems.
Many thanks in Advanced Fill
Fill said:
Hi i have the same problem as all of you. But is there really no solution to this problem except for sending it up to HTC and let the **** be replaced?
I also have the exprience that when its in my pocket is crashes also directly. but when it's just lying on the table nothing happens.
It is now lying there for 2 days without crashing.
i flashed it back to the original ROM. but still crashes after i put it in my pocket.
when i reset it (i cannot turn it normal on with the on button) it turns back on and starts normaly. i can use it now aslong as i don't put it in my pocket.
Please will some-one help find a solution for fixen it what causes these problems.
Many thanks in Advanced Fill
Click to expand...
Click to collapse
just get a new battery and it hopefully will do...it solved my problems...first time i hat the issue....right now i'm having it again...and it seems like the battery
you say it stays like that or 2 days...try running some heavy apps like igo or something other which is memory and battery consuming..it will probably crash..if it does...i'm 95% sure it's the battery
Fill said:
Hi i have the same problem as all of you. But is there really no solution to this problem except for sending it up to HTC and let the **** be replaced?
I also have the exprience that when its in my pocket is crashes also directly. but when it's just lying on the table nothing happens.
It is now lying there for 2 days without crashing.
i flashed it back to the original ROM. but still crashes after i put it in my pocket.
when i reset it (i cannot turn it normal on with the on button) it turns back on and starts normaly. i can use it now aslong as i don't put it in my pocket.
Please will some-one help find a solution for fixen it what causes these problems.
Many thanks in Advanced Fill
Click to expand...
Click to collapse
Exactly my case!!!
I am fed up of being consistently taking my battery out or soft reseting. If it stays over the table quiet, it's ok. The moment it goes into my pocket...
Just ordered Hero...
velhote said:
Exactly my case!!!
I am fed up of being consistently taking my battery out or soft reseting. If it stays over the table quiet, it's ok. The moment it goes into my pocket...
Just ordered Hero...
Click to expand...
Click to collapse
Thanks for replying, it seems that the problem has fixed itself. i put it in the original charger for about 3 or 4 days. it still crashed a couple times just reset with the charger connected put it back. i now just disconnect it from changer (2 days) (after 3 or 4 days in the charger) without any crash. runned tomtom for couple or houres?
i also turned the phone function off and removed the simcard.
hopefully it will keep running and then i gonna try to put my simcard back in.
Thanks
Fill
-----
Ok it crashed already again

Oops..

i posted the begining of my problem somewhere on monday but cant remember where. so.....
on monday, the screen on my tmobile dash messed up, now the top half of the screen has white horizontal lines covering it.
well, i called tmobile and the phone was still under warrenty, so got a like new phone sent and it arived today. I went about unlocking it and upgrading to wm6.1 like i had on my last phone. started out with all sorts of problems sycning and i had to reinstall active sync and that seemed to fix it. continued installing the upgrade, the dos program runs i press the center button and i get the red blue green screen and i know from before that that normally means it isn't working, so i reboot the phone, re sync, and re do it and get the red green blue screen again and the update program says it can recover and it leads me through a four step process, upplug, pull bat, reboot and do it again, only it reboots into the red green blue screen, wouldnt sync and when i turned it off, i couldnt get it to power back up. no response from the phone at all. pulled battery many times and all.
What are my options? I know that i agreed to the statment and i have no one to blame but my self. is there anything i can do? i have 7 days to return the half working phone, and i have a feeling that because its unlocked and has wm6.1 on it that tmobile is going to charge me what ever it will be. I have 200.00 in credit with um, and i feel that those fees will take away from that, leave me with an un usable phone, and no money to do anything about it !
a brainstorm, could i just tell tmobile that i got the phone that way? or would they see through my lies?
please please please please help!!!
and thanks a ton in advance.
Nick
NJDubois said:
i posted the begining of my problem somewhere on monday but cant remember where. so.....
on monday, the screen on my tmobile dash messed up, now the top half of the screen has white horizontal lines covering it.
well, i called tmobile and the phone was still under warrenty, so got a like new phone sent and it arived today. I went about unlocking it and upgrading to wm6.1 like i had on my last phone. started out with all sorts of problems sycning and i had to reinstall active sync and that seemed to fix it. continued installing the upgrade, the dos program runs i press the center button and i get the red blue green screen and i know from before that that normally means it isn't working, so i reboot the phone, re sync, and re do it and get the red green blue screen again and the update program says it can recover and it leads me through a four step process, upplug, pull bat, reboot and do it again, only it reboots into the red green blue screen, wouldnt sync and when i turned it off, i couldnt get it to power back up. no response from the phone at all. pulled battery many times and all.
What are my options? I know that i agreed to the statment and i have no one to blame but my self. is there anything i can do? i have 7 days to return the half working phone, and i have a feeling that because its unlocked and has wm6.1 on it that tmobile is going to charge me what ever it will be. I have 200.00 in credit with um, and i feel that those fees will take away from that, leave me with an un usable phone, and no money to do anything about it !
a brainstorm, could i just tell tmobile that i got the phone that way? or would they see through my lies?
please please please please help!!!
and thanks a ton in advance.
Nick
Click to expand...
Click to collapse
Okay do this, make sure the phone is off and hold the camera button down for about 5 seconds... this button is located to the right of the keyboard. While still holding it down plug in the phone to the usb and now you should see a tri-colored screen come up. Now you can load the original rom the phone came with... The official roms could be found in the link below... called "official roms" and just download the t-mobile rom... and now you can flash your phone with the original rom...
stonersayswhat?
gixxum said:
stonersayswhat?
Click to expand...
Click to collapse
quis-ego....
anyone seen the other half of my thought from the other night? anyone?
Ok, I had found a forum post saying to hold down the SYM button, but couldn't get it working untill I read your reply. Much thanks, the phone is on, and giving me the red green blue screen. I hear the windows alert saying a USB device is plugged in, but active sync wont pick it up. So I'll post about it here, and while I dig through the internet trying to find my cure, I will hope that someone will know what my next step is.
Much much thanks jdoggraz! At least now I know my phone isn't completely dead!
Nick
jdoggraz already told you what to do. YUou do not have to wait for active sync to pick the phone. Just run the exe for the orginal rom.
I have tried to do a hard reset.
Hold the 2 softkeys down(the "-" on each end) for a few seconds, hot the power button down for 2 seconds and then hold the 2 softkeys down and wiat, but nothing happens. Donno why, but may be not being able to hard reset is a clue to whats wrong.
[EDIT]
I have found something about a program called Mtty.exe, and also a UNI_ExitBootLoader But I get a "un able to connect to usb" error with both programs when I try to connect. But, once again, every time I plug the phone into the computer I hear the alert saying a usb device has been attached??
[Another Edit]
I just noticed in Device Manager, under Window CE USB Devices, that my Smartphone USB Sycn Has that nasty Yellow explanation mark next to it.
This device cannot start. (Code 10)
Click Troubleshoot to start the troubleshooter for this device.
?
NJDubois said:
I have tried to do a hard reset.
Hold the 2 softkeys down(the "-" on each end) for a few seconds, hot the power button down for 2 seconds and then hold the 2 softkeys down and wiat, but nothing happens. Donno why, but may be not being able to hard reset is a clue to whats wrong.
Click to expand...
Click to collapse
why are you resetting it? you were at the bootloader screen in your last post...right where you needed to be. now you are 2 steps back?
Sorry guys, I guess I wasn't getting a refreshed look at the forum post, and I didn't see any other posts. I went back to what I was told to do in the first place.
I first tried
1.33.422.1 (Worldwide English, WM6)
1.27.405.1 (Worldwide English, WM6)
With both I get:
ERROR [224] : INVALID MODEL ID
This update utility cannot be used for your smartphone. Please check your Update Utility.
And in the lower right there is a string of characters that is different every time.
What am I doing wrong? I'm so frustrated. I followed your instructions =(
[EDIT] OMG I am an idiot, ignore this post. If I wasn't so beat I might have scrolled down and noticed the tmobile DASH!!!!!!!!!!!!!!
NJDubois said:
Sorry guys, I guess I wasn't getting a refreshed look at the forum post, and I didn't see any other posts. I went back to what I was told to do in the first place.
I first tried
1.33.422.1 (Worldwide English, WM6)
1.27.405.1 (Worldwide English, WM6)
With both I get:
ERROR [224] : INVALID MODEL ID
This update utility cannot be used for your smartphone. Please check your Update Utility.
And in the lower right there is a string of characters that is different every time.
What am I doing wrong? I'm so frustrated. I followed your instructions =(
[EDIT] OMG I am an idiot, ignore this post. If I wasn't so beat I might have scrolled down and noticed the tmobile DASH!!!!!!!!!!!!!!
Click to expand...
Click to collapse
pass the hookah brother..i wanna hang out in your world
puff, puff, give... man!....you're [email protected]#ing up the rotation!
An update.
I have gotten wm5 installed and working on my phone. I can't for the life of me get the 6.1 update to work. I get the agreement, press the center button and it goes back to the OS, the phone then locks up, and I have to restart it to re sycn.
This is very time consuming! The phone takes for ever to start. I also want to note that I upgraded my last dash with little problems, but this dash has been nothing but a head ache. WHY?!?!? I am not looking forward to being stuck with this phone.
Thanks everyone, for all the help. I went a little off course last night, I was falling asleep trying to get this thing working.
puff puff pass
nick
[EDIT] Why wont the screen go almost white after i click the middle button?!?!?!?!?
It works, YAY!!
Thank you soooo freaking much, everyone!
NJDubois said:
It works, YAY!!
Thank you soooo freaking much, everyone!
Click to expand...
Click to collapse
No problem, so what exactly did you end up doing?
damn! it's "cashed"!
pudgedaddy said:
damn! it's "cashed"!
Click to expand...
Click to collapse
hahaha

Touchflo 3d not autolaunching after reset at times.

Is anyone else having the problem where after a soft reset(or a manual shutdown/restart) touchflo3d doesn't autostart?
It happens to me about 50% of the times I reset, but I jus thave to switch it off again and on again and usually it works fine.
Totally different, but I have this sometimes with Touch Flo 2D on my TyTn II. I usually get it if I've installed to much, It always launches if I haven't got the Micro SD card in though.
I've had this happening to me since I got it, and after a few hard resets it still happens... Seemingly at an increasing frequency too.
Yup, I'm experiencing the same problem.
It's really annoying, and more people are having this issue.
There's already a thread about this.
What works for me most of the time is this:
- Disable TF3D in settings.
- Soft reset device with power button
- Enable TF3D again
- Sometimes TF3D starts now, but if not reset again.
I can't wait for a more stable and fast cooked rom
Hope this helps
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
aiaob said:
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
Click to expand...
Click to collapse
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
i have had this happen a couple of times as well.
quarintus said:
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
Click to expand...
Click to collapse
I doubt it's caused by that. I've hard reset it installed core and tomtoma nd had it happen..
and I'm sure it's not just slow to start up, I've tried making calls and simply leaving it for 10 minutes and it still doesnt start up.
It only started haooening to me after I instaled software.
I guess the best thing to do right now, is to install all software with touchflo disabled, then reboot completly the device to finalize the instaltion, and then reboot it again. Now you can reactivate Touchflo again.
This "trick" has worked perfectly on my Pro 2
HastaSSSS
disable startup
Many programs that you install will leave a startup file in the windows\startup directory. Try cutting and pasting them to some temporary directory. I did that with poutlook and slovoed and the problem has gone away for me, without in any way impairing my calendar/contacts or slovoed functioning.
I got the same problem too.. soft resetting a few times do it or disable/re-enable on Personal-Today Items screen
Kinda annoying
Same problem here. Spoke to HTC today and tol them there were more people having this problem. Mine is so serious that it won't start at all! HTC says I was the first and ONLY one in the world with this problem. They told me that if there were more people having this issue they should CALL HTC. It's free to call them... please do so in finding a solution!
Thanks!
I am suffering under the same issue! It is really annoying! HTC should immediately sovle this problem!
Sounds a bit like my thread here: http://forum.xda-developers.com/showthread.php?p=3950507
I copied manila.exe from windows to my start-up folder, now it works fine.
yeah i have the same problem its really annoying. it works about 90% of the time now when i copied the manilla.exe to start up folder. before that i tried to put the phone in airplane mode before booting but that worked like half of the time.
Schijthoos said:
I copied manila.exe from windows to my start-up folder, now it works fine.
Click to expand...
Click to collapse
Does the time on the tf3d homescreen update ok when you use the manila.exe shortcut?
touch flor not loading
My phone is hanging again. I can't get it to load Touch Flo 3D. I get this message that it's trying to activate handsfree network and then it says connected and reboots and goes through the same thing 2 or 3 times. I hard reset back in Dec cause of this and then the same thing happened again about a month ago and out of the blue it loaded touch flo and fixed itself.
But this time it's been a couple days and my phone is so slow it's crazy. It's been trying to remove one program for 20 minutes. I thought removing a few programs might help instead of doing another hard reset but it looks like i'm gonna have to do one more.. I haven't added anything new lately. And I even got a message saying your phone can not boot up because of a program from an untrusted source or something else and it wants me to hard reset. It says press volume up to reset or any key to continue and then it goes to that hands activation screen.
Iv'e tried enableing and disabling bluetooth. Sprint store said I have a bad phone cause of that hands free actication message I keep getting and they want to order me aother phone but it's going to be a refurb so I guess i'll hard reset.. Something is causeing it to hang and not load and I don't know what it is.. But I came here and I tired puttingmy phone in airplane mode and rebooted nothng. I have unchecked and checked touch flo and rebooted..
But I went to windows and saw manilla.exe cause you guys said copy it to start up and I clicked on it and I saw my background and clock again but I don't think Touch Flo fully loaded and my task manager wasn't at the top and I ran clean ram cause it was still slow and it said it freed up 32mb but then my screen went black again. I put it in airplane mode once more and took out the battery. But when I never pasted the manila to start up should I do that? I just clicked on it and saw where my clock and background were back but my clock was off by like 15-20 minutes.. I'm sure I'll probablyt have to hard reset but wanted to ask around a couple more times before doing one.. Rose
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Same thing happened to me.. Touchflo wouldn't load phone was so slow hands free message kept coming and saying connected and rebooting. I did a hard reset and was good for a couple months then out of the blue on day it did it again. I turned off phone and left battery off overnight and just got lucky and the next day as I was getting in my car it came back on.
But then a few weeks later it did it again and I took it to a Sprint store. I was told that the handsfree activation is something that only happens once when you 1st get a new phone and they said my phone was defective. They were going to order me another one but it was going to be refurbed so I never picked up and just dealt with a hard reset once again. Don't know what causes this but I've had my phone reset for over a week and I just now tonight started putting apps back on cause I was afraid ut had to do with something I installed I really don't know what causes it.. But my touchflo wouldn't load at all compeltely black screen no today screen at all and boy was my phone slow. I went to windows and clicked on manilla.exe also and saw my today screen but it was still slow and not completely loading up to touchflo like you said. And then I read about putting it in airplane mode turning off BT nothing worked for me this last time so I did a heard reset again..
Maybe someone else knows what causes this but I'm leary and am not going to put everything back on my phone that was on there but I've put most everything back.. Sorry I wasn't much help but same thing for me hands free siad connected and would reboot and over and over.. I kind of want an Android phone now and I don't think Sprint should of offered me a refurb when I just bought this in Sept and it's an expensive phone. But oh well things happen.. Good Luck!
killerz298 said:
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Click to expand...
Click to collapse

Weird bricked GT-I9195 stuck on black screen after Samsung logo

So, unluckily today i find myself here lookin' for help with my phone. I had already took a look on other brick threads, but i can't find an appropriate answer to my problem.
I'm (i was) running lineage-14.1-20170602-nightly, i had ne0zone75's TWRP 3.1.0.0-0, and that's how the brick came in a strange way; i was simply on XDA Labs app browsing the forum, when i received a call. I've answered, and when i shut off the call the phone shut off immediately after. I thought it was a reboot, but keeping pressed the power button didn't switched on the phone anymore. So i've tried to remove the battery and re insert it after some minutes, but the only thing i can get is the screen with the samsung logo that goes all black after 5 seconds. I already had other bricks due some errors of mine in the past, but this time it's really difficult.
1: I can't access recovery mode. Ow, how i wish i could.
2: I can access download mode, but after that i reach the ODIN MODE screen with the details of product binary, KNOX, ecc. the phone shuts off again.
3: If i keep the power button pressed, the phone doesn't starts. It only starts if i replug the battery in, but after some seconds it shuts off again.
4: How could a call as another mess up the whole phone?
5: I didn't installed nothing new from at least a week... yesterday an automatic update of the Play Store took place, but except that nothing has been changed. Nothing of nothing! No settings, no apps...
What could i do? Installing Kies with Samsung drivers could help me flashing a stock rom for example? Because at the moment, there isn't too much that i can do with the phone in this state... I hope this little jewel won't have to become a stone to be thrown away. Any help would be great, and really appreciated. Thanks in advance...
Things has got worse. Now my device doesn't starts at all; no vibrations, no signs of life, nothing. I've tried even to put it for 6 hours in my refrigerator, because i've read that the cold temperature could be helpful to fix some broken contacts on some component, but i'm losing hope 'bout it. I supposed that at this point is something hardware-based and not software, because it's just impossible that a call like an other one could be the cause of this hard brick... The only thing is that if connected to my PC, it is being showed as QHSUSB_LOAD. I'll try some methods that i've seen in other forums, like softwares that tries to fix this, but i think that i'll be forced to buy a new device. Neither an usb-jig could help me to force the download mode if the phone is dead in every aspect... the only thing that i still didn't understood, is if a debrick.img on my SD card (sadly i've read that a microSD class 10 with at least 16 GB is required, and i don't have one) could help somehow on a situation like this one of not. Still no one could advice me with some tip, guys
Edit - feel free to close this thread, I have another phone now

Categories

Resources