good morning to everyone...
i write from italy..
i've installed a utility on my JAq3 and now it wont load.....
it is freezed on i-mate screen and doesn.t move.....
what can i do?
can i hard reset it?
please answer me...i'm without phone and i need it for working...
thank you in advance..
bye
Turn off device, hold down send, end and camera buttons. Also press the power button then release all after on-screen prompt.
Worked like a charm
Thanks tomtom!
How to hard reset i-mate JAQ3?
How to hard reset my i-mate JAQ3 ?
which is send button?
which is soft keys?
pls help !!!
I have a HTC diamond and I replaced the rom with "DIAMIMG-WWEHD", the ROM upgrade was successful, but the phone did not start, Its starting and I am geting the Touch Diamond screen and then its restarts again.
I tired to restore with the vol down, center button and power button, Its shows restore...completed but when I boot I get the start screen and the phone restarts again.
Have I bricked by phone, is there a way to recovery.
Experts ...Please help
Did u Hard Spl your device before begining this process?
Step 1: Hard Reset your device (With the device turned on, press and hold the VOLUME DOWN and ENTER buttons "aka the center button" , then press the RESET button with the stylus tip).
I will discuss the next steps upon your response.
Let me know if this works.
band27 said:
Step 1: did u Hard Spl your device before begining this process? if yes to step 1 then move on.
Step 2: Hard Reset your device (With the device turned on, press and hold the VOLUME DOWN and ENTER buttons "aka the center button" , then press the RESET button with the stylus tip).
I will discuss the next steps upon your response.
Let me know if this works.
Click to expand...
Click to collapse
I tired the hard reset, I got a white screen with a message saying press volume up button to restore phone to manufacturers defaults, when I did that I got a message Restore...Completed Press VolUp to boot.
When I press the Volup button the phoen does not boot, it comes to the Touch Diamond screen and there is not ROM message at the bottom of the boot screen.
Ok, next step:
Go to your (Bootloader Screen): Vol. Down + Soft Reset
If you are successful here then just plug the device into you pc and get another ROM and start the process over by excuting the RUU_
Which Rom did u originally download.
K..let me know if this next step works.
band27 said:
Ok, next step:
Go to your (Bootloader Screen): Vol. Down + Soft Reset
If you are successful here then just plug the device into you pc and get another ROM and start the process over by excuting the RUU_
Which Rom did u originally download.
K..let me know if this next step works.
Click to expand...
Click to collapse
I pressed the vol down button and the reset button on the back, the phone boots and shows the boot up screen with the "TOUCH DIAMOND" banner and stays there for some time and restarts again
mukesh_thiru said:
I pressed the vol down button and the reset button on the back, the phone boots and shows the boot up screen with the "TOUCH DIAMOND" banner and stays there for some time and restarts again
Click to expand...
Click to collapse
Yeh, that is not your Bootloader Screen. Here, do it like this. Soft reset with stylus first....quickly let go of that and press Vol. Down in that order. When u see the Bootloader Screen you can let go of the Vol. Down button.
mukesh_thiru said:
I pressed the vol down button and the reset button on the back, the phone boots and shows the boot up screen with the "TOUCH DIAMOND" banner and stays there for some time and restarts again
Click to expand...
Click to collapse
The phone is booting again and again, only if I remove the battery it can be stopped.
So it won't let you go to the Bootloader Screen then? Hmm...?
So you soft reset it and pressed vol down and it just reboots constantly?
I put the phone in triggered bootloader mode. Thanks a lots guys for your qucik response.
For future refernce, this link can be checked for this kind of issue:
http://forum.ppcgeeks.com/showthread.php?p=650429#post650429
mukesh_thiru said:
I have a HTC diamond and I replaced the rom with "DIAMIMG-WWEHD", the ROM upgrade was successful, but the phone did not start, Its starting and I am geting the Touch Diamond screen and then its restarts again.
I tired to restore with the vol down, center button and power button, Its shows restore...completed but when I boot I get the start screen and the phone restarts again.
Have I bricked by phone, is there a way to recovery.
Experts ...Please help
Click to expand...
Click to collapse
dI have a HTC diamond and I replaced the rom with "DIAMIMG-WWEHD", the ROM upgrade was successful, but the phone did not start, Its starting and I am geting the Touch Diamond screen and then its restarts again.
I tired to restore with the vol down, center button and power button, Its shows restore...completed but when I boot I get the start screen and the phone restarts again.
Have I bricked by phone, is there a way to recovery.
Mukesh i have one solution for that download hspl package from here http://ds8.fileflyer.com/d/e3858be1...c/u56S/js0hkAj/diamond-hspl-1.23-and-1.24.zip extrace in other folder in ur pc than just connect ur phone to ur pc via cable and just click on dimond-sspl ms-dos batch file than follow the steps ur phone will connect via cable than follow this step 1. download unsigned hard spl v .1.93 olinex from here http://ficca.bounceme.net/download/HARDSpl_Diamond_OliNex_1.93_Unsigned.zip extract in other folders than connect ur phene via active sync than run Ruu if u got 100% job done try it tell me by post message what about ur prob good bless u
mukesh_thiru said:
I put the phone in triggered bootloader mode. Thanks a lots guys for your qucik response.
For future refernce, this link can be checked for this kind of issue:
http://forum.ppcgeeks.com/showthread.php?p=650429#post650429
Click to expand...
Click to collapse
Wow, you're problem would have been solved on the very first post if you told us your phone was CDMA.
mukesh_thiru said:
I put the phone in triggered bootloader mode. Thanks a lots guys for your qucik response.
For future refernce, this link can be checked for this kind of issue:
http://forum.ppcgeeks.com/showthread.php?p=650429#post650429
Click to expand...
Click to collapse
Wow, you're problem would have been solved on the very first thread if you told us your phone was CDMA. But you didn't think there was a difference probably because you didn't read much beforehand.
Hello everybody.
before 2 weeks(13-15 days)I updated my diamond with the gen.Y5.4 ROM
and when I soft reseted it,it shows only the first screen(the original
touch diamond black image)and then nothing...it doesn't boot windows
and i cannot connect it with my PC in order to find a solution or something
like that....
do you have any idea how to repair it?
I desperatly want your help!
ty in advance...
reflash using the bootloader
soft reset then press volume down...now you can flash using your pc
or
try a hard reset
soft reset then press volume down and the circle button
I installed the ROM Cookie Energy and insert a PIN code and restarted my Diamond. When he turned on the password that was entered was not working! I tried a HardReset but the phone does not accept! Nothing happens when I make the key combination!
Please! Help me!!
Thanks!
You can try use mtty...
http://forum.xda-developers.com/showthread.php?t=540290
HELICOPTER88 said:
You can try use mtty...
Click to expand...
Click to collapse
I press VOL DOWN + Reset but nothing happens! Just restart the device.
KaioDiamondHTC said:
I press VOL DOWN + Reset but nothing happens! Just restart the device.
Click to expand...
Click to collapse
Press soft reset then mtty
KaioDiamondHTC said:
I press VOL DOWN + Reset but nothing happens! Just restart the device.
Click to expand...
Click to collapse
Hard reset is VOL DN + Middle Circle Button + Reset
HELICOPTER88 said:
Press soft reset then mtty
Click to expand...
Click to collapse
Still do not understand! I open MTTY and press RESET but still only resets the device. As I explained in the tutorial MTTY but not open the USB port. Only COM1. Please HELICOPTER88. Help me.
Thanks!
got mine to work with these instructions, i dropped htc few weeks a go and it had the same symptons, only booted to the start not os, so i just few minutes ago upped new rom in the ?boot mode? through usb on my win7 and now htc starts to os again, thanks for the instructions and,
KaioDiamondHTC hope you´ll make your diamond too work
Problem Solved!!!!
Thanks to everyone who tried to help me! I took my DIAMOND a technician who fixed the VOL DOWN button. And I could do hardReset.
Thank you all!
Help. I keep gettin stuck on the loading animation on various rom's. Will some2 plz help me.
husnain.mohammed said:
Help. I keep gettin stuck on the loading animation on various rom's. Will some2 plz help me.
Click to expand...
Click to collapse
Take the battery off ur phone then put it again now press the power button with the volume down button to enter bootloader now choose recovery and press the power button once in recovery wipe ur system and cache then make a clean rom installation ur prob should be solved friend