good morning to everyone...
i write from italy..
i've installed a utility on my JAq3 and now it wont load.....
it is freezed on i-mate screen and doesn.t move.....
what can i do?
can i hard reset it?
please answer me...i'm without phone and i need it for working...
thank you in advance..
bye
Turn off device, hold down send, end and camera buttons. Also press the power button then release all after on-screen prompt.
Worked like a charm
Thanks tomtom!
How to hard reset i-mate JAQ3?
How to hard reset my i-mate JAQ3 ?
which is send button?
which is soft keys?
pls help !!!
Related
please help..
my email button doesnt work..
i cannot do a hard reset after flashing new rom..
r
I know that tweaks2k2 .NET has an option to hard reset the device through software. You can run it a few time before having to register it. Try loading it and hard reseting your PDA.
i had the same problem
i managed to fix my mail button by pressing it hard serveral times. just give it a try..
Hello! i would like to upgrade my xda 2s do wm2005 xpload and i have read wiki to! but really don't know how looks like bootloader mode! i pressed on/off, camera button and reset and nothing was happend, mda was reset and that is it! upgrade program do not see current software etc! can anyone can help me with that " by hand" please! first time is always hard! please! cheers Jocker01
Well, have you tried "Record"-button instead of "Camera"-button?
(Press and hold "Record", "Power", and "Reset" until bootloader comes up)
hello thx! finally i get bootloader mode, i've pressed camera, record, on/off and reset buttons! i hope so this is bootloader mode( THX Smokkky ). on screen i have dispelyed usb and v2.07. but ultility still dont update rom! cheers Jocker01
Hi all,
My pda freezes after boot, on tom's b&b 4.0 splashscreen.
It worked perfectly before, so I want to make a hard reset but I don't know how
Thank you
Regards
Please consider the manual. If not, then here on the forum the best place to start for common questions is the WIKI. Go HERE for most of your answers on the Artemis. Please avoid starting new threads for relatively common, probably-already-asked questions. That's what the WIKI is for.
Regards,
Release the soft reset button and keep pressing the soft keys.
Click to expand...
Click to collapse
Thank you, but what's soft key ?
I just succeed in entering bootloader mode
you can look here http://www.pdashop.nl/images/product/image.php?id=47079
Image seems to be deleted
image seems to be deleted
That's ok sorry for double replies I found my answer ^^
Thank you
The 2 softkeys are the buttons that operate the calendar and contacts menus. Hold both down together and soft reset with stylus in hole - press green call button when text appears.
Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Anybody help me ?
Please it's very urgent...
thanks all
can you do a hard reset using the keys and see if that allows the device to boot again ?
reading your post again, i assume that is what you are trying to do with the camera button when resetting, hmmmm
Ok, if i were you, i would try this next.
Enter bootloader mode by doing the following
To enter bootloader, you need to hold the comm manager button and soft reset
If that allows you to enter bootloader, then try reflashing the rom
let us know how you get on after that.
also it might be worth posting in the forum for this device, if you havent already.
hard reset.....To perform a hard reset
Z3nD3n said:
Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Click to expand...
Click to collapse
To perform a hard reset
* Press and hold the CAMERA and COMM MANAGER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
Hello again ...
I am happy. Have back by my Qtek. had already done several times the Hard-Reset the PDA but always without success. I often followed and there began to anything on screen (the 3 colored bars, then asked the question of "send ..." where we have to press the green button "call") and then there came into bootloader and there could . He began to install everything right and it was if he had installed a Rom "new".
To all those who contributed to this "happy ending" my thank you very much.
sry my english
Bye and thanks
Hello everybody.
before 2 weeks(13-15 days)I updated my diamond with the gen.Y5.4 ROM
and when I soft reseted it,it shows only the first screen(the original
touch diamond black image)and then nothing...it doesn't boot windows
and i cannot connect it with my PC in order to find a solution or something
like that....
do you have any idea how to repair it?
I desperatly want your help!
ty in advance...
reflash using the bootloader
soft reset then press volume down...now you can flash using your pc
or
try a hard reset
soft reset then press volume down and the circle button