Related
Error 114 when upgrading Radio an Vodafon V1640 (Spain).
Display "No GSM". No IMEI. No version Protocol...
Windows Mobile (CE) Run OK and Upgrading this OK.
Extended ROM run OK and Upgrading this OK.
The CID is Locked:
in mtty.exe:
USB>task 32
Level=FF
USB>
Impossible Mission upgrading all ROMS Radio (including Room of Buzz, 0.00.0 and the rest 1.04, 1.06, 1.08, 1.09, 1.11, etc etc).
And I Exec the tool of Buzz from the HTC Universal, it DOES NOT WORK.
I have tried everything. ...¿¿¿ Exists some solution for this problem ???
Hi, which method have you followed to upgrade your device?
(Excuses for my bad English)
I have a Vodafone V1640 (Spanish) and unlock this with the tool of Buzz, (From Radio original version 1.09 TO Radio version 0.0.0.0). Soft Reset, and exec the Unlocker of Buzz from my HTC.
Up to here all OK. YES, I work the unlocker. All OK.
But, later 4 or 5 days, and various soft-reset and one hard-reset, I have a next message on the display at reboot:
"No GSM",
and not recognize my SIM Card, and not have IMEI, and not have Protocol...
In addition, either, I can not install other Radio ROM, because i have the next error:
ERROR 114 RADIO ROM UPDATED ERROR
this with all of radio roms possibles (1.03 , 1.04, 1.05, 1.06, 1.08, 1.09, 1.11...)
Desperate, also upgrade the Bootloader (from the original 1.00 TO 1.01)
All equal, Same error.
After 3 months I have seen that there is people who happen to him just like to my, but with other models of HTC (ex. Hermes), Unfortunately , I believe that there is no solution for the HTC Universal .
I believe that my error was no upgrade later the special radio 0.00.00 TO Radio 1.11 for example, AND Upgrade the Bootloader 1.00 TO 1.01 .
Now that the situation is this:
- The Radio does not work, ¿¿Is corrupted, Broken??
- I cannot update the Radio (Error 114)
- Wit the tool mtty, type:
USB>task 32
Level=FF (Not SuperCID !!!)
USB>
either, now, the tool of Buzz does not work ( it works, but it does not do anything ) .
This user have the same problem:
http://forum.xda-developers.com/showthread.php?t=289260
And the This classification I have Type 1a :
http://forum.xda-developers.com/showthread.php?t=286755
but this is for HERMES , Not for HTC Universal, I proved it but it did not work .
Please, can yo help me? ¿¿has solution this disaster for HTC Universal (Vodafone V1640 Spain)?
Excuses for my bad English!!
¡¡and thanks for any answer!!
Ok, let's see ... what I really meant was are you upgrading with your device in "bootloader mode" or once WinCE is booted?
If you're doing it with the WinCE already running, please try putting your device on bootloader (Power+Light+Reset) and run again Buzz's unlocker (with Ma_UpgradeNoID.exe).
If this method doesn't work take a look to this thread:
http://forum.xda-developers.com/showthread.php?t=289260
It talks about reflashing your radio using an SD image dumped from another device, this could harm your Universal...so don't blame me!
Currently there's not radio dumped in the ftp so I will try to get it tonight or maybe tomorrow, I have installed on my device 1.14.10.
Hope the first method will work!
thank you very much for the answer...
Please, you could explain to me like flash the radio with a SD Card (step by step).
I have all the Radio Roms, but never I upgrade by the SD Card, (the format that must have, etc etc). Always I upgrade flasheado by USB.
Thanks
And I have read if the CID is Locked (is my case) it will not work either because he command "lbl" from mtty.exe it not work .....
Oh mon Dieuuu (
Ok, the dumped Radio rom 1.14.10 it's now here.
I have never perform this, but as far as I understand you have to make a raw copy of my dumped image to a blank SD card, insert it on your device and get into the bootloader.
Wait some seconds and something will be written on your display, just asking to press power to begin with the flashing.
But again I'm just guessing....
BTW, I did the image file using linux command 'dd' so if you use linux as well it should be easy to restore it to an SD card. Sorry I can't tell about windows.
Good luck!
thanks , I download the file, and to copy a my Sd Card with ntrw.exe
F:\>ntrw write Universal-radio.img j:
NTRW v2.00
Removeable media
Cylinders: 0:62
TracksPerCylinder: 2
SectorsPerTrack: 63
BytesPerSector: 512
bufsize is 65536
63569920 bytes written
ALL OK, (my SD Card is the 512 MB). Input the Card in the device, soft-reset, enter the bootloader... and Not Run. ¿?¿?
Any have idea? that I make bad?
I will continue investigating….
Help, How to Load the Rom by SD Card?
Help, How to Load the Rom by SD Card?
In mtty 1.42 and 1.16 , the command s2d
Level = FF
USB>s2d
Invalid command : s2d
For a help screen, use command ? or h
USB>
Howto load the ROM from SD Card to the device?
And with the format?
Please help, this is my last hope...
Hmm maybe I did something wrong....may I assume you're Spanish? If so please feel free to contact me privately and I could send you my little 64MB SD card, I have tested it and works, I mean I didn't flash my device with it but I've seen the option to do the flashing
as far as i know the card MUST be 128mb (taken from the service manual and my personal experience)
Midget_1990 said:
as far as i know the card MUST be 128mb (taken from the service manual and my personal experience)
Click to expand...
Click to collapse
I thought it was more a matter of space than a real requirement cause I just dumped the full radio (~16MiB).
Could someone please confirm this?
Thanks.
I obtaining a card of 128 MB and I have repeated the process.
F:\>ntrw.exe write uni.img j:
NTRW v2.00
Removeable media
Cylinders: 0:15
TracksPerCylinder: 255
SectorsPerTrack: 63
BytesPerSector: 512
bufsize is 65536
63569920 bytes written
F:\>
I enter bootloader with the sd card and it does not pass anything.
Not to be because the security level is Level = FF (and not is SuperCD) ???
From mytt, type task 32:
USB>task 32
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SDetected one card
SD:ready for transfer OK
d.total_lba=3BF00
d.block_size=200
d.RCA=1
d.drv_type=40000000
d.busWidth=1
Total card size=77E0000
Wait interpreter timeout
Level = FF
USB>
Tripledes, I have sent you a private message
tomsan said:
Tripledes, I have sent you a private message
Click to expand...
Click to collapse
I have the same problem of "no GSm",could you please send me the massage too. Thanks
no GSM
thanks you guy! I have step by step, and when I updated by sd card, the screen show me "sections=1 not allow update". who can give me more advise,
I have same problem.
the rom headers r differrent..u need to copy the headers.I know that for a ce rom first 416 bytes r to b copied..for radio i don't know..may be someone can tell here
tecumseh said:
I have the same problem of "no GSm",could you please send me the massage too. Thanks
Click to expand...
Click to collapse
Hello,
Same problem here, http://forum.xda-developers.com/showthread.php?p=3187581#post3187581
Did you solved??? How
Rui
Hi all thanks for looking at my thread.
I'm try to upgrade my Dopod D810 and i encounted a problem and would really like some help here.
The steps i thought i should take were the following
Run...
Unlock and CID Unlock
HardSPL
Radio
ROM
However, after running the Unlock and CID Unlock, i tried to run HardSPL.
But i come accross the "ERROR [246] DEVICE NOT RESPONDING" when i run the ROm update utility.
On the PDA with the 3 color screen
TRIN100
IPL-SSPL by Des
TIN100
SPL - 1.07.ds
and in the white "USB"
what have i done wrong? should i have no ran the UNLOCK and CID Unlock? if so how do i revert this? and what are the correct steps to take to upgrade this?
I am a hermes user and i've done exactly what i did to my hermes to his one.
Please help me.
Kind Regards,
Jason
---------------------------------
guys please, i tired reading the wiki and it told me to run SSPL-TRIN on my device.
i ran it, tired running the utilites again and i get the same problem.
the wiki and text documents says that as long as my SPL ends in a ".ds" i should be able to flash any rom without a problem but i still cant.
all i want is to have a english ROM and the current radio
please help masters. i keep getting "ERROR [246] DEVICE NOT RESPONDING" when i try to flash LVSW lastest rom.
kind regards,
jason
----------
I have been able to upgrade the radio to 1.41.
but i still get ERROR 246 when i try to upgrade the ROM or HardSPL
I'm waiting for help and will be very greatful when someone responds.
Kindest regards,
Jason
have you tried to run the RUU again (leaving the device connected in bootloader, tri colour screen) after you get the error?
Same problem here...
Alternative flashing method.
I just can tell I success using MiniSD with TRINIMG.nbh and execute SSPL-TRIN.exe to flash it. Hope this help. Read Wiki for details.
EDIT
ok i understand that you are suggesting that i use my SD card to Flash the ROM in.
If this is successful i will be greatful but will i have to do this everytime from now on rather than through the computer?
jason
racerx_ said:
have you tried to run the RUU again (leaving the device connected in bootloader, tri colour screen) after you get the error?
Click to expand...
Click to collapse
Ok so i've tried to flash a ROM/HardSPL using the SD card.
i;ve rename the file to TRINIMG.nbh
and then i;ve loaded it in to the bootloader.
however i get a quick flash of a grey background with the word "Loading" and then it just goes to the tri color screen and nothing happens.
the Tricolor screen shows
TRIN100
IPL-0.50
TRIN100
SPL-1.20.Olipro
(white area) Serial(or USB)
Please someone help me out.
a member has mentioned that it is because i do not have Super CID and i should run the unlock. but i have done so.
please guru's of trinity! help me!!!
Personally, I've never been able to flash my phone from the SD card. Never tried before Hard-SPL, but certainly since it just does not work. Need a Windows XP machine (my vista 64 bit won't work - can't find the 64 bit driver for USB bootloader mode). Find yourself a windows pc!
nealed said:
Personally, I've never been able to flash my phone from the SD card. Never tried before Hard-SPL, but certainly since it just does not work. Need a Windows XP machine (my vista 64 bit won't work - can't find the 64 bit driver for USB bootloader mode). Find yourself a windows pc!
Click to expand...
Click to collapse
My attempts with the SD have not work, when i put the SD card in and put it in to boot loader, i get a quick flash of Loading and its just stuck on the tricolor displaying
TRIN100
IPL-0.50 (could this be the problem?)
TRIN100
SPL - 1.20.Olipro
(white area) serial
i do have a windows XP home machine.
man this is stressing me out. please guru's help me out
ok i dont know how but i've some how been able to upgrade to the lastest LVSW. there is a god (i've always known)
how i did this was i was trying to run HardSPL again. It went in to the bootmode while the Utitlty on the computer gave ERROR 246.
So i thought i'd run LVSW, and what do you know? it work! and upgraded!
the question i have is
when i load the bootloader screen i get
TRIN100
IPL - 0.50
TRIN100
SPL - 1.20. Olipro
but then ERROR 246 occurs
i get
TRIN100
IPL-SSPL by Des
TIN100
SPL - 1.07.ds
So does anyone know what is wrong with my Trinty?
What do you bootloaders show?
---------------------------------
edit.
i;ve also noticed that after successful being able to upgrade to LVSW when i look at device info.
my radio hasnt actually upgraded, but back when i wasnt able to upgrade the rom it said i had 1.41.
but now i only have radio 1.16. but i have been able to upgrade to radio 1.41. now.
I just use TRIN-SSPL.exe and make it go into SuperCID Bootloader mode. Then it ask me to confirm whether I want to flash it, press [Power] to continue and it work.
MJRL said:
Same problem here...
Click to expand...
Click to collapse
are you using xp or vista? If you have vista try that on a windows xp machine. I have seen that many time on my p3600.
Just my 2 cents
First time with vista, but after read so many problems with vista i've tried with xp, but gave same error has jasonchiu, i'll try has he did,ignoring the error
Is it possible that other files on the MiniSD?
Try format the memory card and write the files.
I am running Vista so this the only way for me,
I used this method to flash WM5 and WM6.
On the memory card, only
TRIN-SSPL.exe and TRINIMG.nbh
and the device is not SuperCID.
Hello !
First, sorry for my english.
Then, my SPV M650 (Artemis) is bricked.
It shows "Searching for SD Card" and still stay on the bootloader screen (the muticolor screen) and nothing else.
On the bootloader scren I can see the IPL and the SPL numbers :
IPL: 3.13.0001
SPL: 3.13.0000
When I connect the phone via an USB cable, on the phone screen I've got a "USB" item appears at bottom left and Windows XP see a pocket PC connected (but not activesynced).
When I tried to reflash it with the RUU tool, I always got an error 260.
The RUU tool can't connect to my phone.
For me, the SPL is not good but I don't know how to change it with my phone in this state.
I tried to flash it directly with a 2GB SD card (FAT32 formated) with only a ".nbh" file at the root directory but it don't work.
If someone got an idea... I will take it with pleasure...
Thank you for your help.
Hi,
Are you following these instructions:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
I see from your SPL that you are not using the USPL so your flash image would have to be your original unmodified SPV M650 flash image. The name of the image file must be ARTEIMG.nbh or it will not be found.
Hope that this helps,
Matt.
Thank you for your help.
The phone is always on the boot loader but the flash with the original Orange ROM modified my IPL and my SPL (only after the second flash).
New IPL: 1.84.0001
New SPL: 1.84.0000
The flash not take 30min as follows in the wiki.
The steps during the falsh are :
- Checking SD Card
- Validation
- Formating BINFS (1s)
- Reading from SD (5min)
- Verifying certificate (5s)
- Flashing EXTROM (1s)
- Flashing GSM CODE (1s)
- Flashing first phase OS (10s)
- Reading second OS from SD! (5min)
- Flashing second phase OS (3s)
- Success. Press any key.
=> Back to bootloader.
So the phone still bricked.
It seems that you have now a working IPL, so now try to flash the USPL, after that your phone should have SPL 1.11.000 (or so )
Link: http://forum.xda-developers.com/showthread.php?t=311403
After that you should be able to flash any ROM you like.
Don´t forget to first flash a Radio!
Link: http://wiki.xda-developers.com/index.php?pagename=Artemis_RadioUpgrades
Good luck!
Thank you four your help mat2206.
But how can I flash USPL with a bricked phone ?
From SD card it's not work. I get a "Invalid certificate" error.
And for flash a new radio or ROM version, I will need the USPL...
Any ideas ?
Damned !
I find the way to flash USPL.
But I've got an 270 error when I did it at 99% of the flash.
Now the phone don't turn on. Not feels good...
Any ideas ?
drummer01 said:
I find the way to flash USPL.
But I've got an 270 error when I did it at 99% of the flash.
Now the phone don't turn on. Not feels good...
Any ideas ?
Click to expand...
Click to collapse
You need HTC assistence! You have damaged the SPL and now the phone is died!
You can't power on, you can't start bootloader, you can't do anything...
HTC Assistence
cesconoa said:
You need HTC assistence! You have damaged the SPL and now the phone is died!
You can't power on, you can't start bootloader, you can't do anything...
Click to expand...
Click to collapse
Thank you for this news.
But the phone is not under guarantee.
And I don't want to pay much money for unbrick my phone...
drummer01 said:
Thank you for this news.
But the phone is not under guarantee.
And I don't want to pay much money for unbrick my phone...
Click to expand...
Click to collapse
I hope you find a solution, I don't know if it's a way to write the rom without bootloader (something like JTAG)...
I've read a way in the assistence manual, but you need a particolar sim card...
I'm having a mare....my Artemis has died after a hard reset - just sits at bootloader. I can't flash any rom at all using RUU. All cooked roms fail after 3% with a "image corrupt" error and all original roms (wm5 and wm6 for o2 orbit) fail after 5% with "Flash Write" error.
I've also tried flashing from SD card....starts...but then fails on the validating certificate with an "SD FAT error" or sorts.
I know it's probably salvagable as I can get into bootloader....any ideas? People on forums are telling me to unlock using USPL...but because i cant get into the os to get activesync....it won't work.
a simular thing happens to me my one sits in a rgb screen and says ipl 3.04.0001 and spl 3.04.0000. none of the roms i used work ive just decided to leave it. if your ipl and spl is lower than mine i guess you will be more likley to get working again as people with the same ipl and spl as me cant get their one working
Try to go to bootloader and try to use it :
http://forum.xda-developers.com/showthread.php?t=311403
If it work try to flash with any custums roms.
If you don't have this , you only can flash with officials roms. That's why you can't flash with custums roms
Qui-Gon Ginn said:
Try to go to bootloader and try to use it :
http://forum.xda-developers.com/showthread.php?t=311403
If it work try to flash with any custums roms.
If you don't have this , you only can flash with officials roms. That's why you can't flash with custums roms
Click to expand...
Click to collapse
Thanks for this however I;ve been directed to that thread before and each time it's pointless. There is no point me attempting to USPL my device when I can't get an activesync connection due to the fact it has no OS bootable.
As for the official Roms...I've tried the ones that have been touted as official for the Orbit but with no effect.
My IPL SPL is currently 1.25.0001/1.25.0.000 but when i attempt to flash with official rom (!) it moves to the same as spikez - ipl 3.04.0001 and spl 3.04.0000
Anyone with any further help - ordered a new Touch HD but I need to get this one up and running
Thanks
have you tried sd card flash
make sure you put the orignal rom on the root of a none sdhc card (1gb or smaller) and is renamed to "Arteimg.nbh"
official wm5 rom
official wm6 rom
Simply put the phone in bootloader with your 'boot' card inserted and follow the instructions.
Spikez.....I've tried that before. It reads from the SD card....goes through the motions, and then provides an error after about 5-10mins saying "SD FAT update failed"
Any ideas...please reply if only to say "no chance mate"
Thanks for any help you can give me.
i still guess yours is more likely to be fixed than mine as mine just goes straight to the rgb screen can you take a picture of what appears on your screen.
Try use an none offical rom and does your artemis ask you to "update sd image press this key to start download"
unfortunately i've left my digi cam at work I can explain rather well though, bear with me:
I reset the device with SD card in and I get a white screen saying "Checking SD Card" - there is then an arrow asking me to hit volume key to flash...I do that.
I get 5 mins of "Reading from SD" at the bottom of the white screen. Following that I get a "verifying certificate" message and then about 10seconds later a "SD FAT update failed!!!" message...it then just sits there until I press a key on the device and then it falls back to bootloader (multi coloured screen)
this MUST be fixable by somebody who isn't a noob like me - any ideas?
either try add these files into root of sd card
Enterbootloader.exe
rapitool.exe
RomUpdateUtility.exe
RUUGetInfo.exe
RUUREsource.dll
RUU_USPL_Signed.nbh, and
"Arteimg.nbh"
or try once in bootloader plug in usb and try using a ruu
files didn't work...just went straight through to bootloader as opposed to reading SD card. As for launching the RUU through windows...didn't work either. Bombed out after 5% with a "FLASH WRITE " error
Wiggz said:
My IPL SPL is currently 1.25.0001/1.25.0.000 but when i attempt to flash with official rom (!) it moves to the same as spikez - ipl 3.04.0001 and spl 3.04.0000
Thanks
Click to expand...
Click to collapse
as your ipl and spl is so high i guess you may have a Brick i cant seem to get my one working either as i earlier stated it is very common that people with this ipl and spl cant seem to get theirs back working.
spikez93 said:
as your ipl and spl is so high i guess you may have a Brick i cant seem to get my one working either as i earlier stated it is very common that people with this ipl and spl cant seem to get theirs back working.
Click to expand...
Click to collapse
True but as can be seen from that post...mine shifts from 1.25 to 3.04 depending on the flash attempt?
my best suggestion to you is stick with it. Try read through this sign up and post here andrew, bill, [email protected] and noney82 very helpful read through see if that post is any use.
Hi,
I'm using Artemis with one of Tom's ROM. The device was working well. But today suddenly the device won't start up - it is locked at the startup screen showing the SPL, IPL etc. I can enter the bootloader.
Can anybody tell me how to flash the ROM at this stage?
Flash from bootloader
Hi!
Please download an official rom and keep pressed the Power and Record buttons. You will see a screen with 3 colors (red green blue). Connect the USB cable and wait for Activesync. After this start the original rom flasher and follow the instructions. If you can start the Windows, you should flash the USPL again and you can flash cooked roms. If you flashed a new one, i think you should also upgrade the radio rom.
Sorry for my English
well i'll give it a try.
BTW will activesync work if the phone is not booting up?
sure it will, but make sure you have the only phone pluged in, nothing else, and disable all firewalls and antivriuses.
Good luck
i flashed with htc official rom and it worked first. after soft resetting a few time (due to program installation) the phone again back to earlier state.
it is showing:
ipl 3.13.0001
spl 3.13.0000
gsm 2.94.90
os 3.13.0.0
and stuck at this screen.
i tried to update the phone again with the same rom - but i'm getting error 270.
do i need to unlock cid before flashing?
but i can't use the uspl tool as i can't connect to activesync.
pls help.
make sure the battery is fully charged again.
Restart your PC, isbale ll antivirus and firewalls
Better if flashing in XP PC
put PPC in Boating status
Flash Shipped ROM
Specify which software caused you the trouble and do not install it again
CID unlock PPC
Flash any cooked ROM.
once i flashed the phone with the shipped rom successfully. The phone was CID unlocked then. But now when I try to flash the shipped again i'm getting an error message (error 292 or something - stating-invalid vendor id)
archat68 said:
once i flashed the phone with the shipped rom successfully. The phone was CID unlocked then. But now when I try to flash the shipped again i'm getting an error message (error 292 or something - stating-invalid vendor id)
Click to expand...
Click to collapse
you must unlock phone again.
I tried flashing the device with factory shipped ROM. but i'm getting Error 294-invalid vendor id message.
please suggest what to do?
chance are you have stuffed your bootloader...
start from scratch again by running uspl:
http://forum.xda-developers.com/showthread.php?t=311403
than flash your favorite rom again, ideally via sd-card-flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
greetz
thormdac said:
chance are you have stuffed your bootloader...
start from scratch again by running uspl:
http://forum.xda-developers.com/showthread.php?t=311403
than flash your favorite rom again, ideally via sd-card-flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
greetz
Click to expand...
Click to collapse
USPL needs activesync running. Can you tell me how to run USPL when I can't boot into windows?
well,
its been some time, but i am pretty sure uspl puts your device into bootloader and operates from there...
have you tried setting it into bootloader, connecting via usb and simply starting uspl?
running a normal setup-routine, there is no need to start it from wm either-simply put it into bootloader and start setup!
greetz
Well i tried that. But it seems that USPL doesn't work without activesync.
i've also tried flashing with SD card, but after a brief "Checking SD card content" message the phone goes back to bootloader.
Someone helpppp pls.
are u sure your sd card is correctly configured, according to the wiki entry- especially part "if above fails" ...?
if all steps fail, assumed you performed them correctly, you might try taking out battery and leave the device fully without power overnight...and restart it the next morning
I've used a 512MB SD card - formatted it- and copied the OS file as ARTEIMG.nbh - put the sd card in the phone and started the phone in bootloader mode.
I think there is nothing more to do.
I can enter the bootloader, connect the phone to PC in USB mode. So, I hope that my phone is not bricked.
But how to revive it?
if you are in bootloader, i dont see why you shouldnt be able to flash!!!
try another sd-card, use another xp computer, exchange the usb cable...
yust to be certain: have you left out battery over-night?
...and what are the details stated on boot-loader screen (numbers)?
oh, and I get the feeling you are not working exactly as told:
in your PC right-click on Computer, then select Manage
Select Disk Manager and then delete existing partition
create a new partition with max size 256MB
format this partition in FAT32
thormdac said:
(i)...and what are the details stated on boot-loader screen (numbers)?
(ii) oh, and I get the feeling you are not working exactly as told:
in your PC right-click on Computer, then select Manage
Select Disk Manager and then delete existing partition
create a new partition with max size 256MB
format this partition in FAT32
Click to expand...
Click to collapse
(i) See post no 5 for the details
(ii) You can not do this with a removable disk (SD card inserted through a card reader). Only works when you can get WM5Storage to work.
archat68 said:
(ii) You can not do this with a removable disk (SD card inserted through a card reader). Only works when you can get WM5Storage to work.
Click to expand...
Click to collapse
...i dont have my micro-sd-card-adapter at hand atm., but there sure will be possibilities formatting your sd card accordingly...try administrative tools/computermanagement/storage/diskmanagement under xp, boot your pc with a diskpartitioner like acronis disk director...
i can only advise you to keep trying...but as long as you can not say for sure sd-card-flashing is working correctly, i wouldnt give up...
and as far as flshing bootloader via usb/activesync goes, i can only say i once screwed my device due to insufficiant battery power during sd-card-flashing and thought it was bricked just at the point you are stuck now!!! - totally resetting it with the power-oiut-method, i.e. battery out overnight, revived it!!!
than agin i sure as hell did everything the way it was ment o be done...and nothing worked until i switched to another pc/ usb-cable!!!
so, to sum it up, DONT GIVE UP!!! bootloader is showing...so there must be a way to get this to work...
greetz
archat68 said:
I tried flashing the device with factory shipped ROM. but i'm getting Error 294-invalid vendor id message.
please suggest what to do?
Click to expand...
Click to collapse
Somebody please help me to revive my phone.
how can we help you, if you dont provide us any results of the steps suggested to you...ideally in a way so we can see what you actually did or didnt do, precisely as told ?!?
greetz