Cant connect to internet after updating to new ROM - P3300, MDA Compact III General

Hi all;
I updated to new ROM from PDAMOBIZ a few days before.It works fine.But when I tried to download QUICKGPS data via activesync and it cannot connect.And I also tried internet explorer.But it also doesnt work either.I did hard and soft resets with no effect.The contacts and appoinments get sync'd.So active sync works.Is there any settings to connect Internet explorer or quickgps via activesync?May be tht cud be the problem.
Thnx to all

I have the same problem, no solution known. Will do a hard reset and update - hope that will work...

Related

not able to connect to GPRS at all using Radio 1.13

since installing radio 1.13 i have not been able to connect to GPRS using wap.voicestream.com. this is after a hard reset with none of the EXT rom tools loaded. i try to connect, and it times out. in 1.12 i would be able to connect once but after connecting to activesync or disconnecting GPRS i was not able to log back in unless i soft reset or turned on flight mode then turned it off. I have 1.40 ROM installed with phone alarm 1.21, pocket plus, and wisbar 2.4.11
UPDATE!!!
ok, i uninstalled pocket contacts 1.1 from www.pocketx.net and installed pocket conctacts PRO 3.0. i also unloaded mort ring. well when i did that i was not only able to connect to gprs, i am now able to RECONNECT when i disconnect! wierd...
What device do you have and what ROM are you running? I'm looking to solve this problem on my PDA2K.
i have the same device and ROM as you do. since i last posted. i am only able to connect to GPRS after a soft reset, not turning on/off flight mode
Downgrading Caller ID to IA_CallerID_1.20_WWE.CAB will fix this problem. It worked on mine at least...
downloading and installing the cab for the caller_id worked for mine as well. i've had no problems with gprs connections since performing the downgrade -- which was a little over a week ago. i think you can find the cab in these forums if you search for it.
i dont have that caller id sodtware installed at all and i still have the gprs reconnect issue

wm5storage is freezing

Hi,
On my new HTC S620, wm5torage (1.73) is working fine for file transferts (read/write) but when I deactivate it, my smartphone freeze, and I had to hard reset it
Is wm5torage working on yours smarts
I try ton uncheck the "advanced USB functions" in Settings>connections>usb to PC but it didn't work
I have hte same issue, is anybody using WM5storage where it works properly?
Same problem here
same problem here..in my case soft reset solves the problem..and it does not happen every time i use the app.
is there any alternative to wms storage ? supporting USB 2.0 ?
cudo
You might want to try responding to the wm5torage thread on MoDaCo, since that's where the developer hangs out.
http://www.modaco.com/WM5torage-t238545.html

Restore official ROM

Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
cabexas said:
Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
Click to expand...
Click to collapse
Try an other usb port on your computer.
And yes, offical rom restore everything (ipl,spl,radio,os)
I have already tried that.
The only thing that i can remember that i didn't tried, is connect in a different computer, but i will try that as soon as i get home.
thanks
try another ROM. got that activesync issue also with every Mary ROM.
You can find it in UDK rom thread
Active Sync Error 608
Try this to solve the problem:
Quote:
Originally Posted by nanni100
I solved cause my Windows Firewall was damaged and not customizable, then i found a reg file to solve this problem, installed on pc and reboot. On startup i saw the window of Win Firewall who asked me to unlock Activesync i said yes and turn off the firewall
I have a ethernet router with DHCP enabled
Then i configured the phone:
-Enabled Advanced Netword Function
-Go on Setup, Wi-Fi, Network, Remote HOST- NDIS
-Select the Specific IP Address like this:
IP Add: 169.254.2.1
Sub Mask: 255.255.0.0
Gateway: 169.254.2.2
and on the other page put only on the first DNS: 169.254.2.1
on the pc lan connection i leave the dhcp enabled "Obtain IP Address from serv" also for DNS (obviously cause i have the DHCP enabled on my router)
And MAGICLY all start works FINE!!!
After hours and hours spent on configurations, the problem was "simply" the windows firewall, but also the configuration of Remote Host-NDIS is important
Hope that can be useful for other
Right now i don´t have the MARY rom but the TUGA V3 ROM and problem continues. I have already tried to setup Remote HOST- NDIS like that and it didn´t work too.
Anyway thanks for all your help.
Thanks
Use the SD Card Method...
I use the SD Card Method. MUST BE FORMATTED AS FAT32 first. (As per willowxda's post. Thanx Willowxda)
Copy SSPL_TRIN.exe to your SD card's Root folder. (Included in ZIP File)
Rename the RUU_signed.nbh file in your OEM Rom to TRINIMG.nbh
Copy TRINIMG.nbh to your SD card's Root folder.
Run SSPL_TRIN.exe from your device.
Allow it to Flash and Restart as needed.
Works like a charm...
cabexas said:
Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
Click to expand...
Click to collapse
it is very simple but it took me too long time to figure out.
My PC hangs several times, I thought it is related to DMA or to IRQ interrupt requests for the microproccessor, but failed to solve it. This problem never happened to me while I was having the Qtek ppc, and even when I used the official HTC ROM when I bought this TrinTy. Then I started to check everything related to USB connection till I catch it. it is very silly, just to clear one checkbox.
Here what worked for me:
Click Start > Settings > Connections > USB to PC
you will find a checkbox......Just uncheck it. --------> Thats to disable advanced network functionality.
I believe it should work for you.
Try POWER + CAMERA + SOFTRESET (this enter the bootloader mode) and then install the ROM you like ... you will get no errors !!!
Click Start > Settings > Connections > USB to PC
you will find a checkbox......Just uncheck it. --------> Thats to disable advanced network functionality
Click to expand...
Click to collapse
That was the first things that i tried to do, but with no luck.
Yesterday, i did what nightfear suggested and it worked fine.
As soon as i restored the official rom, AS started to work like a charm.
That is a strange issue, but for now it's resolved.
Lets see if the problem doesn't come back when i put WM6 on it again.
Thank you all for your help.
Mini SD card must be formatted in FAT32 for flash update to work
I have been trying to upgrade flash via SDCard but it did not work no matter how hard I tried (switch btw hardspls).
Then I realised that I have to format the SDCard to FAT32 so that the Hard SPL can recognise the card in bootloader prompt.
I am using Hard SPL 1.30

unable to boot imate jasjar

All I did was soft reset my phone to free some memory. It comes to the screen showing Tmobile and the R 0.00.00, G 42.37.p8, D 1.12.42 WWE and stays there for ever. I tried hard reset and reflash of the rom but it will not load.
Can any of you experts please help. I know i have lost all my data as it had stopped syncing with my PC due to some outlook problem but atleast if you could help me save the phone.
Regards
at 1st u need to flash proper radio(all radios Ull find on wiki.xda-developers.com) if it wont work afteer that try to use one of the tricks described there as well (ie Uni_exitbootloader....) if thah wont work either, try to format DOC. (thru mtty)
Cheers it worked, dont know exactly what did, but I did use the mtty and downloaded a rom programme from the T mobile web site. Its working now.
Was wondering if u could also help me with synchronising issue with outlook. It gives me a support code error. It sysncs files but does not sync contacts or calendar enteries.

QuickGPS not updating on activsync connection..

Hello all,
This could be ROM related, but I could not find any solution in the searches I've made. I am finding that QuickGPS is not updating automatically upon connection with activsync...when set to do so.
I would assume that the fix is in the registry? Perhaps someone else has had this issue and found a solution?
Looking forward to trying anything simple, before I update the ROM....
Thanks
facing same problem & couldn't find a solution
hope to find suitable fix
i THINK u need internet connection to be active on your computer 1st
If your in AS mode and connected to Internet through the PC then you can do it Manually by going to the Program and Taping on it,
If someone has an Automatic solution once you're connected to AS & PC i would like to hear about it, maybe the same solution could happen for Automatic Weather update??
Just to clarify the problem:
The PC is connected to Internet, and my HD is connected through ActivSync.
I have Internet connection using Opera & can surf websites normally using it.
BUT cannot surf using Internet Explorer , and also can not update QuickGPS manually (when click Download, I got the message "Connection Failed. Pls try again later"
Thanks if anyone can help.
Interestingly enough my issue is different.....
I can download the data when I click the "Download" button...no problem
HOWEVER, the minor issue is that it is not automatically updating and downloading on connection with Activsync.....as it is supposed to do
I think if you not able to download any updated data (at all) then you have a more serious problem. Sometimes their server is down and getting the data does not work

Categories

Resources