Develop Bugs

Please, I need some help with bootloader

Hi Guys,
I know that this forum is all about XDA's, but as you guys seems to be very experienced on this field I thought that I could get some help.
I have a Toshiba e400 PocketPC. Its rom is in French and I need to change it to English.
The problem is that I cannot update it because the bootloader does not let me.
I've download both ROM WM2003 and WM2003SE in english from Toshiba's website (both downloads came with the ROM image and the bootloader itself).
When I try to update it whith the "flash" tool that toshiba provides it says to use the line "-xlng" that was supposed to ignore the ROM language and install it anyway but it does do anything, because the bootloader language is in french.
I need to find a way to install a new bootloader and then I could be able to install this new ROM.
Do you guys knows any bootloader program that may let me install this new bootloader?
Thanks a lot!

I have the solution for you
email me
[email protected]
please try to find for me an e330 or e335 as I need to read the flash. I will tell you what you have to do. Just try to help me. I have a german version of e330 and I need to change in english. But I dont have english version from it.

When flashing ipaq from german to english, I would run the flash program, with the an english ipaq in cradle, then when the program asked me to enter bootloader I would substitute the german one and it would flash no problems.

Vodafone ROM - Bootloader

Hello!
I was searchig for this Image (attached) to put in my Bootloader (or something like this, Vodafone ROM's One), since I use Vodafone Service Provider but I have a Qtek with Qtek's ROM.
I dont want to upgrade do Vodafone's ROM, Warrancy problem..
If you have a Vodafone ROM on your Universal, please send me the bootloader Image!
Thanks
Deiota

Hi!
I don't believe that there aint nobody with this image on bootloader that can give me!
Please!
Thanks
Deiota

Sorry Deiota but I surely don't have it. My Universal isn't Vodafone...
But can't you adapt a Vodafone logo and put it as bootloader?

Hello!
I did that already!
Thanks
Deiota
PS-matas-me a responder a inglês!!!!

i need to install WM6 on my HTC P3300 with the following

Hello there everyone.
Im new to this forum.I need help to upgrade my htc p3300.
IPL-3.13.0001
SPL-3.13.0000
GSM-02.94.90
OS-3.13.0.3
ROM Version-3.13.409.1 NOR
radio versio-02.94.90
protocol version-4.1.13.44
Ext.rom version-3.13.409.102
I need to upgrade it in english.Please help is needed badly.
Best Regards
Edit/Delete Message

Just read the sticky posts and you should know what to do.
CID Unlocking / USPL and further tips from Meschle are not that hard to find....
After successfully running USPL you can flash any rom (for Artemis) you want....
being new is no excuse for being lazy...
btw: you're from norway ? niiiiiice girls there

no im from Albania
i did the cid unlock but can you give me a link where to download the english version of windows mobile. because after i did the cid unlock i did install the new version of windows mobile but in norwegian.
did you check the data form my artemis are they correct so i can upgrade to english version?

davaxhiu said:
did you check the data form my artemis are they correct so i can upgrade to english version?
Click to expand...
Click to collapse
If your SPL is 1.11 your device should be cid unlocked and ready for flashing.
(this should be after running USPL)
There are lots of english versions....check the wiki pages...
The newest one's are bepe's wm6, B&B 4.3 and Meschle's Touch 3 and O2 Premium 2

my spl i 3.13 and this is after i did the cid unlock and installed wm6 but in norwegian can i install it in english with this spl??

my spl is 3.13 but this came out after cid unlock and after installing the new version of wm6 in norwegian.
can i install it in english with this spl???

davaxhiu said:
my spl is 3.13 but this came out after cid unlock and after installing the new version of wm6 in norwegian.
can i install it in english with this spl???
Click to expand...
Click to collapse
USPL need to be 1.11.0000 before you can flash to an other ROM

ok i will try again and post results.can you give me a link where to download wm6 in english but non rapidshare , i cant download there

davaxhiu said:
ok i will try again and post results.can you give me a link where to download wm6 in english but non rapidshare , i cant download there
Click to expand...
Click to collapse
Here you can find WM6 custom ROM's.
The original you can find here.

thanks man i did it.
i first did the cic unlock and i got the spl 1.11.0000 than i flashed with the artemi touch 3.01 and it works fine man.thanks a lot.
if you could send me some link with some applications for example tomtom navigator and any extra applications.

thanks man i did it.
First i did the cid unlock and than i flashed with artemis touch 3.01 and it worked.
Now i need some more applications like tomtom or any other application.
Can you give me any link ??
thanks man

Upgrading to WM6 official and be able to rollback ?

Hi,
I'm new to the xda-developers forum.
I've carefully read all informations available on the wiki and in various threads of the forum, and I have to say that I'm a little confused with upgrading / downgrading stuff.
First of all, I have a SPV M3100 bought in France, Simlocked to Orange France (HERM100, IPL 1.01, SPL 1.11).
I would like to test the official HTC WM6 ROM, but I'm not sure on how I should process.
First, as far as I have understood, it is a good idea to install HardSPL v7, which allows me to flash the HTC Rom on my Orange France CID-locked device. Am I right ?
Second step, I have downloaded the HTC_TyTN_FRA_3.54.256.2_103_6275_1.47.00.10_108.exe file from the following thread http://forum.xda-developers.com/showthread.php?t=320829
From here I'm not sure on how to proceed.
Knowing that I would like to be able to rollback to the official WM5 rom shipped by Orange France (which I have already downloaded from the wiki), what should I do:
- either flash the WM6 rom directly. I'm afraid of "overwriting" the hardspl v7 stuff in the device ?
- or extracting the content of the WM6 rom and doing all the stuff described in http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide to remove the bootloader from the ROM ?
I have read some posts about custom RUU too... What does this means ? Am I concerned ?
Thank you for your help.
Florent

Need to load back SPL-2.03

Ok all expert here i want to ask a question. I want to send my diamond for a repair that still in warranty. before this i've load olinex unsigned 1.93 spl. but when i reflash to original official 2.03 rom the spl is still the same and not the 2.03 version one. I've done using the nbhutil to extract the spl module from official rom and make it an nbh format. but when i flash the spl only it still the 1.93 version. how is this happened?
**do u really think that they will check for the spl version before repair instead of official rom loaded? i'm afraid just because of the spl version is not the official one will void the warranty.
please help me. sorry for poor english.

Hi,
Flash a stock rom. Stock rom thread (it will update your spl, radio, flash):
http://forum.xda-developers.com/showthread.php?t=471699

mrm2007 said:
Hi,
Flash a stock rom. Stock rom thread (it will update your spl, radio, flash):
http://forum.xda-developers.com/showthread.php?t=471699
Click to expand...
Click to collapse
I already flashed to the stock 2.03 rom but when i check the bootloader version its still spl-1.40 olipro. before this its spl-2.03. so how?

Your SPL is Hard-SPL, meaning: write protected. You can only overwrite it using Soft-SPL (= SSPL). Search and you'll find it.

I had to return my handset and returned to different official ROM and SPL than supplied by the operator. So I would suggest to use 1.93 for both check this post/thread. Once you have your phone back to 1.93 for both SPL and ROM - Load your 2.03 ROM which should update the SPL too.
http://forum.xda-developers.com/showpost.php?p=2324837&postcount=20
Check the top of the same thread too HERE

if you search ( ReStore Hard SPL ) you can see my post about your problem

Hello, and everbody hello,
please tell me, is it possible people from company where i buyed HTC diamond
Diam100 64m
microp-diam (led) v11
psoc-diam stage_pvt v0x32
to discover, am i changed STOCK SPL to HSPL unsigned, when i back to STOCK SPL uploaded in post #20 , i'm not sure which one from that post to use ?
1.34, 1.38 , 1,93 or ?
I'm not sure what was originally - stock SPL which came with my phone , i sent mail to HTC support to ask him, do they know to tell me over S/N what was first originally SPL on my phone, but they tell me all information what they have, but not 1st version of SPL.
Information are like this
SN :HTxxxxxxxxxxx IMEI :xxxxxxxxxxxxx Part Number :xxxxxx-00 Part Description :SKU,HTC,Swedish,SWE,UMTS 900/2100,Cut,Black,Diamond-XX,w/oSIM LockSIM Lock Customer Name :xxxxxxx : HTC Model DIAMOND-XX
this phone is buyed in Sweden, and my problem is, i don't know what version of STOCK spl from post #20 to use for warranty, cause i have to send my phone in service for repairing, but what Stock SPL to use, for no discovering from people which work in repairing service?
I remember version of stock rom was 1.93 Swedish, one before latest, but for SPL i'm not sure, maybe 1.34 or 1.35, i scarried they will discover me, i used HSPL, and i don't know what stock SPL to put on my HTC for warrant and no discovering about using another SPL-s like HSPL , unsigned,signed etc..?
Tnx in advance everbody for help!
God bless you
Greetings
p.s.
Phone is buyed - unlocked, not signed for some mobile operator or similiar! It came just with stock ROM - 1.93 swedish, and maybe 1.35 spl or maybe 1.93, it's buyed before 1-2 month, maybe that will help me to discover which was stock SPL, and which one i have to use for warranty?

please somebody help, cause this is urgent for me, i have to send phone in service today
tnx in advance,
greetz