Upgrading to WM6 official and be able to rollback ? - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hi,
I'm new to the xda-developers forum.
I've carefully read all informations available on the wiki and in various threads of the forum, and I have to say that I'm a little confused with upgrading / downgrading stuff.
First of all, I have a SPV M3100 bought in France, Simlocked to Orange France (HERM100, IPL 1.01, SPL 1.11).
I would like to test the official HTC WM6 ROM, but I'm not sure on how I should process.
First, as far as I have understood, it is a good idea to install HardSPL v7, which allows me to flash the HTC Rom on my Orange France CID-locked device. Am I right ?
Second step, I have downloaded the HTC_TyTN_FRA_3.54.256.2_103_6275_1.47.00.10_108.exe file from the following thread http://forum.xda-developers.com/showthread.php?t=320829
From here I'm not sure on how to proceed.
Knowing that I would like to be able to rollback to the official WM5 rom shipped by Orange France (which I have already downloaded from the wiki), what should I do:
- either flash the WM6 rom directly. I'm afraid of "overwriting" the hardspl v7 stuff in the device ?
- or extracting the content of the WM6 rom and doing all the stuff described in http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide to remove the bootloader from the ROM ?
I have read some posts about custom RUU too... What does this means ? Am I concerned ?
Thank you for your help.
Florent

Related

Orange SPV 3100 WM6 Upgrade Problem

My Orange SPV 3100 was locked on orange and I SIM unlocked only with the help of HTC_Hermes_SIM_CID_Unlock_v3a it worked fine and I now I am using O2 on it
However, now I wish to upgrade it to official wm6 from Orange or HTC it does not work it say USB not connected...and gets stuck on 4 colour boot screen.
Please any suggestion. HELP!
Official WM6 from Orange? Eh? Where is this?
Original WM6 upgrade from orange is here....
http://www.business.orange.co.uk/servlet/Satellite?pagename=Business&c=OUKPage&cid=1044134915191
naru6705 said:
http://www.business.orange.co.uk/servlet/Satellite?pagename=Business&c=OUKPage&cid=1044134915191
Click to expand...
Click to collapse
That is WM5 AKU3 release from April 2007 I think you'll find
My Orange SPV 3100 was locked on orange and I SIM unlocked only with the help of HTC_Hermes_SIM_CID_Unlock_v3a it worked fine and I now I am using O2 on it
However, now I wish to upgrade it to official wm6 from Orange or HTC it does not work it say USB not connected...and gets stuck on 4 colour boot screen.
Please any suggestion. HELP!
I forgot to mention I am on WINDOWS VISTA
Vista *could* be a problem.
On the O2 web site there is an official download of WM6 for the Trion. Maybe you should try to get hold of that since you are on O2.
i have also orange spv m3100
few days ago orange here (slovakia) announced there will be NO official orange WM6 update for this pda, so i decided and flashed it with tnt2 wm6 rom
my orange was never flashed before, so i did it in 3 steps, which i suppose you need to do too
1. install bootloader Hard-SPL-V7 (alias olipro 2.10)
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
(you have there also link what to do first when you use vista)
2. install radio (gsm part) - i used latest v1.51 - find the download link on this page somewhere (hermes wiki)
3. install choosed rom - i used TNT2 professional pp4 with htc home
in fact i did it for the first time and had no major problem (only in step 3 the autodetection of bootloader failed and there was no option for v2.10 so i choosed "newer" or so) and after third restart the WM6 booted up ...
Hi there,
I too have an Orange SPV 3100, using it on O2.
I would prefer the O2 XDa Trion Rom but can't access it cos it is not an O2 serial number - (anyone who has the O2 XDA Trion WM6 ROM, please get in touch!)
Anyway, back on topic. Today, I upgraded my MPV3100 from WM5 to WM6 using the HTC ROM available via this site:
http://forum.xda-developers.com/showthread.php?t=298520
From this page I selected the following link which is a file share site, I selected the free download option and was downloaded in a minute:
http://rapidshare.com/files/2179382...1.255.1_102_6275_1.38.00.10_108_Ship.exe.html
This upgrades to the WM6 ROM and gets rid of all the Orange stuff and all their annoying branding, it just leaves it with the HTC logo's when reseting, no more Orange stuff in site!!
I suggest you use this unless you can access the XDA trion ROM.
I had absolutely no problems with the HTC ROM when installing it. Unit is running well, however, I have noticed I cannot access the front camera like others on this site have mentioned after upgrading to WM6 - a small price to pay as I never use it.
naru6705 said:
http://www.business.orange.co.uk/servlet/Satellite?pagename=Business&c=OUKPage&cid=1044134915191
Click to expand...
Click to collapse
yes this is only latest orange update for mn5 not wm6
if you have unlocked previously then i advise you run oli 2.10, ithink thats what its called basicly hard spl
this will let you instal the manufacturers rom
but why on earth would you do that
i suggest you install shamanix grass, based on schaps roms
its super fast and very stable

Help me upgrading to Dopod D810's WM6 from HTC P3600's WM5

I have purchased my HTC P3600 from London but there's no upgrade to WM6 here at it's european site whereas the HTC HongKong is giving an official upgrade to Dopod D810 (http://www.asia.htc.com/asia/event/W...ownload_1.html ). It's available for download after sign-up.
Dopod D810 WM6 ROM Details:-
File Name: D810_SEA_WM6_Upgrade_20070709.zip
D810 WM6 English Version Upgrade code (2007/07/10)
ROM version: 3.00.707.17
ROM date: 06/29/07
Radio version: 1.46.00.11
Protocol version: 32.79.7020.19H
The downloaded .zip file contains the following three files :
1.RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46. 00.11_108_Ship.exe
2.Installer_Trinity_BackupTool_5.1.0_DopodAsia_WWE _061106.exe
3.070421_WM6_NewFeaturesGuide_PPC_Generic_English. pdf
Please tell me what is SPL, HardSPL & SuperCID. Also how to find it if it's there.
Can anybody tell me if I can install this official WM6 ROM to my HTC P3600(bought in London & it's free from sim-lock) and how to do it as I'm new to upgrading & how to go about this upgradation.
12ka4 said:
I have purchased my HTC P3600 from London but there's no upgrade to WM6 here at it's european site whereas the HTC HongKong is giving an official upgrade to Dopod D810 (http://www.asia.htc.com/asia/event/W...ownload_1.html ). It's available for download after sign-up.
Dopod D810 WM6 ROM Details:-
File Name: D810_SEA_WM6_Upgrade_20070709.zip
D810 WM6 English Version Upgrade code (2007/07/10)
ROM version: 3.00.707.17
ROM date: 06/29/07
Radio version: 1.46.00.11
Protocol version: 32.79.7020.19H
The downloaded .zip file contains the following three files :
1.RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46. 00.11_108_Ship.exe
2.Installer_Trinity_BackupTool_5.1.0_DopodAsia_WWE _061106.exe
3.070421_WM6_NewFeaturesGuide_PPC_Generic_English. pdf
Please tell me what is SPL, HardSPL & SuperCID. Also how to find it if it's there.
Can anybody tell me if I can install this official WM6 ROM to my HTC P3600(bought in London & it's free from sim-lock) and how to do it as I'm new to upgrading & how to go about this upgradation.
Click to expand...
Click to collapse
Here is the BIBLE:
http://www.trinityguides.info/
Sorry to be rude,but dude search and read.You guys are creating posts for topics that have been discussed for months.
This same question is explained many times (upgrades,spl,hard-spl,cid unlock)
Sorry and enjoy your xda.
www.trinityguides.info
Thanks to racerx_
i'm in the same situation,
is this rom ok for the p3600?
idsk said:
i'm in the same situation,
is this rom ok for the p3600?
Click to expand...
Click to collapse
If you have HTC, no it is not ok for you P3600, it is ok for Dopod!
Different CID, so you need hard-spl, and Dopod rom without spl!
Read the bible!
www.trinityguides.info
thanks i updated my trinity to wm6 and working well
Really thanks for you
Error 246 Device not responding
I'd bought my htc p3600 pro (black, free from sim-lock & free from any carrier) from London.
As advised by TRINITYGUIDES.INFO site I tried to do HardSPL with all the three available HardSPL files, but of no avail.
When the HardSPL's progress bar comes(on pc) it gives a message on my phone " Enterbootloader.exe....This may harm your device...Do you want to continue.." I pressed yes & the process stopped & gave an error on pc "Error 246 Device not responding" & on phone screen showed the bootloader with
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
I did soft reset on my p3600 & its working as usual with it original spl infos.
I want to put official WM6 SEA version(ROM+RADIO) on my phone...Please help.
12ka4 said:
I'd bought my htc p3600 pro (black, free from sim-lock & free from any carrier) from London.
As advised by TRINITYGUIDES.INFO site I tried to do HardSPL with all the three available HardSPL files, but of no avail.
When the HardSPL's progress bar comes(on pc) it gives a message on my phone " Enterbootloader.exe....This may harm your device...Do you want to continue.." I pressed yes & the process stopped & gave an error on pc "Error 246 Device not responding" & on phone screen showed the bootloader with
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
I did soft reset on my p3600 & its working as usual with it original spl infos.
I want to put official WM6 SEA version(ROM+RADIO) on my phone...Please help.
Click to expand...
Click to collapse
Do it again...if you see the error, DO NOT TOUCH THE PDA, just restart the program on the pc!
Everything will be ok!
And read trinityguides:
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67
Stuck at 28% on bootloader with Dopod WM6 SEA version
@ fktsndr :
I did again & it worked.
I did HardSPL with Olipro's Hard-SPL 1.30 from trinityguides.info & my bootloader shows me the following info. which are correct
TRIN100
IPL-0.50
TRIN100 MFG
SPL-1.30.Olipro
I then tried to install the Dopod WM6 SEA version(ROM+RADIO) but got stuck at 28%...I then reverted to my original wm5 (as I had the wm5 ruu as a backup).
Can you please explain why this upgrade failed. Also I have downloaded the Dopod ANZ WM6 version...should I go with this...Please inform if there's any problem.
Could any one of you explain what this link says http://forum.xda-developers.com/showthread.php?t=316410
Thanking You All.
Stuck at 28% on bootloader with Dopod WM6 ANZ version
I tried flashing my HTC P3600 with Dopod WM6 ANZ version but the same thing happened with me as with Dopod SEA version-got stuck at 28%.
I then again reverted to original OEM rom.
My bootloader details are :-
TRIN100
IPL-0.50
TRIN100 MFG
SPL-1.30.Olipro
Could any one of you tell me which version only-rom is this on the following link & why does it not show the ExtROM in Device Information (refer to it's second page) on ppc.
http://forum.xda-developers.com/showthread.php?t=316410 Does it has only wm6 rom & not radio....
Thanking You All.
Guys,
Offical Dopod wm6 has special spl, and you will stuck at 28%!
Please READ before ask!!!
http://trinityguides.info/index.php?option=com_content&task=view&id=14&Itemid=66
Here you can find the safety converted Dopod WM6 without spl, and step by step tutorial!
fktsndr said:
Guys,
Offical Dopod wm6 has special spl, and you will stuck at 28%!
Please READ before ask!!!
http://trinityguides.info/index.php?option=com_content&task=view&id=14&Itemid=66
Here you can find the safety converted Dopod WM6 without spl, and step by step tutorial!
Click to expand...
Click to collapse
Could you please tell me details of the rom converted by Shadowmite on the link quoted by you
12ka4 said:
Could you please tell me details of the rom converted by Shadowmite on the link quoted by you
Click to expand...
Click to collapse
There is no spl no radio in it, so you will not stuck at 28%...
Upgraded to WM6 OS. Radio upgrade completed successfully but it hasn't changed.
I have successfully upgraded my phone to WM6 OS (sans radio) as given on
http://trinityguides.info/index.php?option=com_content&task=view&id=14&Itemid=66 , which doesn't have IPL,SPL & Radio. The rom is ANZ English with HTC_P3600i firmware.
But the problem is with the Radio upgradation, it shows successfully completed and the phone resets itself but when I check in Device Information it shows the same old version 1.38.00.11.
I've tried three radios namely 1.46.00.11, 1.46.30.11 & 1.50.08.11 but of no avail.
Does anybody has any idea of it & how to get it done with latest radio.
Thanking You All
12ka4 said:
I have successfully upgraded my phone to WM6 OS (sans radio) as given on
http://trinityguides.info/index.php?option=com_content&task=view&id=14&Itemid=66 , which doesn't have IPL,SPL & Radio. The rom is ANZ English with HTC_P3600i firmware.
But the problem is with the Radio upgradation, it shows successfully completed and the phone resets itself but when I check in Device Information it shows the same old version 1.38.00.11.
I've tried three radios namely 1.46.00.11, 1.46.30.11 & 1.50.08.11 but of no avail.
Does anybody has any idea of it & how to get it done with latest radio.
Thanking You All
Click to expand...
Click to collapse
You have Olipro 1.3 hard-spl on you machine.
If you use this, and step manually to bootlader you can not flash radio.
From trinityguides:
Although Olipro's Hard-SPL 1.30 is the newest version, many people have reported not being able to upgrade their device with this version running. For now it is recommended to use 1.20 or Des' crash-proof SPL for successful upgrades
READ !!!
Now, do not use manually bootloader, just start the radioupdate program on your pc, and everything will be ok!
Radio Upgradation Works With HardSPL 1.20 Olipro
I have now successfully upgraded my Radio to 1.50.08.11 with HardSPL 1.20 (Changed my HardSPL from 1.30 to 1.20).
My HTC P3600's specifications.
My HTC P3600's specifications...

[ROM-REQ]Official Italian H3G Touch Diamond Rom (v. Official 1.93)

Has someone this rom? (Official Italian H3G Touch Diamond Rom (v. Official 1.93).
Regards
EDIT
I need this version: 1.93.772.1
here it is!
Code:
http://rapidshare.com/files/160535375/1.93.772.1_3_ITA.rar
(only nbh file, and have to install hardspl before flash it!)
bye!
I've already installed and flashed a cooked rom but I'd like to recover my phone to the original rom in case of necessity.
So, where I can find the original bootloader (the original "hardspl")?
EDIT
Is the one in this page good?
http://forum.xda-developers.com/showthread.php?t=400411
I also need the spl stock number for this rom version...... is 1.37 or 1.93 the correct one????please....next week I have to send my diamond to costumer service....
Can anyone help us? Can anyone controll on his own diamond? What is the original spl version for a H3G ITA branded diamond with the latest rom version? I suppose 1.93 but I'm not sure...
For rom 1.93.772.1 the spl is 1.93
gianx80 said:
Can anyone help us? Can anyone controll on his own diamond? What is the original spl version for a H3G ITA branded diamond with the latest rom version? I suppose 1.93 but I'm not sure...
Click to expand...
Click to collapse
Thank you!
Best Ragards
i had some issue with this rom, installing it i had no ring for incoming call and shell32.exe crashed making impossible saving changes for sound settings, so i couldn't use it. i tried it with olinex spl and original spl thinking for a compatibility problems, but it wasn't, so i come back to te older 1.93.408.3... i downloaded exactly this file... did you have some problem with?
otherwise i could see it is faster then older one, it has 10% more free memory (just flashed and booted it has about 49/50% memory usage.. the 1.93.408.3 has 56-60% memory usage and it make free less memory using and closing applications) and, it has 77mb free against about 55mb...
I've not yet flashed my device with this rom (I'll flash it only for warranty reasons), but I'm curious: ervius, did you have problems with your H3G branded rom?
could somebody post a working link for download?
i need this rom for warranty reason
if you need for warranty reason you can also flash the old official italian rom and use original spl, my diamond arrived with the official rom and not with h3g rom...
Here it is ... http://www.megaupload.com/it/?d=YQNCWXRQ.
Ervius, did you remove the file from rapidshare?

Revert to latest official WME 6.1 ROM ?

Hello,
I received my HTC already with a cooked room and after having played with a other more recent cooked roms (mainly energyrom ones) I decided to revert to the latest HTC WME 6.1 official ROM for my HTC Diamond. Before doing so, I've 3 questions (I could not find explicit answers searching in existing topics):
1- Can I update my diamond with an official HTC rom even if an hardspl, cooked room, etc are already installed?
2- My serial indicates that my HTC diamond is a Dutch version. Can I install an official English (Europe or WWE) on it?
3- Which is the latest version for the English (europe or WWE) ROM?
Thanks a lot if you can help.
See my sig for flashing guide
scubapro10 said:
Hello,
I received my HTC already with a cooked room and after having played with a other more recent cooked roms (mainly energyrom ones) I decided to revert to the latest HTC WME 6.1 official ROM for my HTC Diamond. Before doing so, I've 3 questions (I could not find explicit answers searching in existing topics):
1- Can I update my diamond with an official HTC rom even if an hardspl, cooked room, etc are already installed?
2- My serial indicates that my HTC diamond is a Dutch version. Can I install an official English (Europe or WWE) on it?
3- Which is the latest version for the English (europe or WWE) ROM?
Thanks a lot if you can help.
Click to expand...
Click to collapse
Responses:
1) Yes, Please refer to Post #39 for Instructions.
2) Yes, but to this, you need to have your device CID unlocked..<<HERE>>.
3) Do a search for this one, dinner is ready...

hi

HI everybody
I am new in this field
i know nothing about HTC phones
i just bought new one swedish version
but i want change the language to english
anybody can help me and explain it to me easily
thanx alot
Yes you need to install HardSPL to install a non-Swedish ROM as the phones are region locked and HardSPL region unlocks it (not sim unlock) this allows you to install cooked ROMs or official ROMs from HTC for another region.
Here is a link to the HardSPL guide (read it carefully):
http://forum.xda-developers.com/showthread.php?t=416211
Here is a link to the latest WWE 2.03 Official Diamond ROM:
http://forum.xda-developers.com/showthread.php?t=478714
Although you may like to browse the cooked ROMs once you've installed HardSPL as you can use the,m too after that.
Welcome to the Diamond Community!
thanx alot for fast replay my phone is unlocked
so should i do all these steps ??
Yes because if it sim unlocked it does not effect the region ROM locking that HTC or the carrier put i place which is why you need hardSPL to unlock the bootloader so it will allow you to install unofficial and official ROMs from other regions or carriers! So the answer is yes.
So did it work?

Categories

Resources