Hi
I've O2 XDA Exec flashed to WM6 ROM. Default Splash screen is gone. How do I get back O2 splash screen. Pls resolve.
Secondly is there any call filtering software working with WM6 ROM (Crossbow Rom Update 2.01.06 WWE). Pls do inform
Thanks
Dinesh
You can create the boot splash, download the following rar and follow instructions
ftp://xda:[email protected]/Universal/Tools_and_Programs/CreateBootScreenPackage.rar
After flash the boot screen to Universal will be hard reset, so please backup data after flash.
Related
I have a couple of M5000s that I have unlocked and flashed with I-mate firmware but I still have the Orange startup screen .. how do I get rid of it?
Thanks for any help.
have a look at http://buzzdev.net. There is a tool for changing the splash screen!
Thanks
Hi,
I downloaded the files. Can someone tell how I intall the .cab file onto my universal please.
I used to have the old rom of Movistar, and i dont know why it couldn't go through the boot image, so i decided to flash to the lastest jasjar WWE rom. I did it successfully, but I have the same problem... i cannot pass through the i-mate boot splash screen. It gets stuck there... what can be happening?
Consider your machine a brick. It needs to go back to the supplier to get the motherboard changed.
bro
can help me for this problem need help
ne tool to repair asking admins password
on stratup
Hey iam new to this upgrading,CID unlocking etc.
I just bought my Cingular 8125 three weeks before.
I tried upgrading to WM 6.0 The update process completed successfully but after the reboot my mobile was back to factory default with wm 5.0.
without tring the lokiwiz to unlock, i used shelltools to flash the wm6.0.
it was successful, it asked me to do a hard reset.
Since then i am stuck up with the boot screen.
I can't get my Mobile back working.
i tried flashing with the Offical rom but of no use.
i have tried button rom, love rom. nothing works out.
without much knowledge i upgrade my spl & IPL to 3.08
now i am not able to downgrade that too.
tried flashing different roms but of no use, still it stucks up in the boot screen.
the only hope iam having is i am able to get into the boot loader.
I am not sure, where to post this thread, my appologize if i have posted in the wrong page.
below is the information i have on the screen
IPL 2.26
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Some one please help me out. i am very much worried, any help is very much appreciated.Thanks a bunch in advance !
dosai.
Have you tried flashing from the bootloader to an official rom?
thanks for reverting, i have tried that too, but of no use.
Sounds to me like you didn't run the Cert_SPCS and EnableRapi cab files before flashing with ShellTool. Being stuck at the splash screen is a dead giveaway.
I never did understand why someone would attempt to flash a ROM without doing ALL the steps. . .
i did ran Cert_SPCS and EnableRapi cab before running the shelltool. shell tool took around 10 mins to complete the update.after restart, my phone stucked up in the boot screen!. (i remember not unlocking the cid before proceeding with the shelltool) .
is there any way to get the mobile working i am too worried.
Solution
Hi, press and hold the CamShot Button and press the Power button, when you see a multi-color screen you can make a update again.
Hello all Im new here and have the same problem. I followed all the steps and followed all the instructions to fix this problem but nothing. I am stuck on the multi-color screen and i can't do nothing! HELPPPPPPPPPPPP!
Hi
I have a LITTLE problem , I was trying to change bootsplash few times, use few bootsplash files, every time had same effect, bootsplash changed in part of screen, or cuted on parts (Backups of bootsplashes which I can't see properly when UNI starting, look normal when i check it on bmp format, so file was ok) . I try to rotate bootsplash by make bmp file from rsb, turn it in Paint, and make rsb again. Next I run change bootsplash procedure , after reset I get white screen and ..... nothing is happening booting is stuck you can see only white screen .
Plzzz help . should i try to load other ROM ? any ideas ?
DATA of my Unit:
it was T-Mobile MDA Pro WM5
bootloader 2.01
now is
radio 1.18
ROM Ranju V7.7 (6.1 Pro)
EDIT:
is there Uni ROM fo G4 which change bootsplash ?
or maybe is some way to change bootsplash from bootloader mode ?
EDIT 2:
I'm going "deeper"
Try to flash my device few roms and naw in every CE ROM flash in 7% I get error:112 , flash device to radio rom 1.09 is no problem .
Orginal shiped t-mobile rom ext rom error:113
I made one mistake for sure, I have't ulock ext rom ,and first flash try was with ext rom package , maby its a problem source.
Some advice please , besides I should know english better
God bles uni-wiki
I found solution for my UNI problem :
First I follow procedure "Uni_Stuck_Bootloader", from xda-dev wiki, twice first time i had some error .
Second I run RUU BstyL26_V8_WM6ProBusiness which allready contains nice bootsplash and Radio ROM good for me
Third flash to CE ROM which I prefer
For now I abandon tryes of change bootsplash maby later ...much later
Good luck for all.
hello each rom that i download and have the file Custom_RUU.exe
not working on my imate jasjam
whats happening is : the rom start the installing process and when the imate needs to load the boot loader screen (blue red green) just before the process of the rom copying should start the phone goes to sleep mode..
mainly i just want to install energy rom 3.0 on my imate ..
is that problem can be solved ?
bennylu said:
hello each rom that i download and have the file Custom_RUU.exe
not working on my imate jasjam
whats happening is : the rom start the installing process and when the imate needs to load the boot loader screen (blue red green) just before the process of the rom copying should start the phone goes to sleep mode..
mainly i just want to install energy rom 3.0 on my imate ..
is that problem can be solved ?
Click to expand...
Click to collapse
hi dude!
For first time flashing and newbie:
Please flash HardSPL and OEM Stripped AT&T first before you can flash Custom ROMs.
HardSPL link: http://forum.xda-developers.com/attachment.php?attachmentid=37669&d=1177280888
OEM Stripped AT&T: http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
Flashing method :
Withactivesync http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
For How to flashing with MicroSD,http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
And Hard reset after flashing rom
good lucky !
hi!
thanks for the fast replay
ive done exactly as you said but the problem stays ..
if i flashing roms that comes with the file RUUWrapper.exe
i have no problem
is there any convertor that can convert between those types?
Mate, use the sd card method... No problems with syncing ever again...