Bootsplash Change Problem - JASJAR, XDA Exec, MDA Pro Software Upgrading

Hi
I have a LITTLE problem , I was trying to change bootsplash few times, use few bootsplash files, every time had same effect, bootsplash changed in part of screen, or cuted on parts (Backups of bootsplashes which I can't see properly when UNI starting, look normal when i check it on bmp format, so file was ok) . I try to rotate bootsplash by make bmp file from rsb, turn it in Paint, and make rsb again. Next I run change bootsplash procedure , after reset I get white screen and ..... nothing is happening booting is stuck you can see only white screen .
Plzzz help . should i try to load other ROM ? any ideas ?
DATA of my Unit:
it was T-Mobile MDA Pro WM5
bootloader 2.01
now is
radio 1.18
ROM Ranju V7.7 (6.1 Pro)
EDIT:
is there Uni ROM fo G4 which change bootsplash ?
or maybe is some way to change bootsplash from bootloader mode ?
EDIT 2:
I'm going "deeper"
Try to flash my device few roms and naw in every CE ROM flash in 7% I get error:112 , flash device to radio rom 1.09 is no problem .
Orginal shiped t-mobile rom ext rom error:113
I made one mistake for sure, I have't ulock ext rom ,and first flash try was with ext rom package , maby its a problem source.
Some advice please , besides I should know english better

God bles uni-wiki
I found solution for my UNI problem :
First I follow procedure "Uni_Stuck_Bootloader", from xda-dev wiki, twice first time i had some error .
Second I run RUU BstyL26_V8_WM6ProBusiness which allready contains nice bootsplash and Radio ROM good for me
Third flash to CE ROM which I prefer
For now I abandon tryes of change bootsplash maby later ...much later
Good luck for all.

Related

Splash screen change

Hi
I've O2 XDA Exec flashed to WM6 ROM. Default Splash screen is gone. How do I get back O2 splash screen. Pls resolve.
Secondly is there any call filtering software working with WM6 ROM (Crossbow Rom Update 2.01.06 WWE). Pls do inform
Thanks
Dinesh
You can create the boot splash, download the following rar and follow instructions
ftp://xda:[email protected]/Universal/Tools_and_Programs/CreateBootScreenPackage.rar
After flash the boot screen to Universal will be hard reset, so please backup data after flash.

Bricked hx2750 help

After an successful rom upgrade from win 2003 se ITA to wme5 eng AKU 3.5.2 i`ve got my hx2750 dead.
The only thing that i can do is contact+itask + reset and got o Pre-BL: 1.00.02 screen. i tried original hp update/ patched update / universal bootloader/mtty and host11 without any results. hp update / patched update giveme succesful update after 2 sec then shutdown my ipaq. With mtty i can connect with my ipaq but i don`t have any prompt just flashing cursor. With universal bootloader it start and do nothing. And last host11 give me lost usb connection after 1 second. I tried to contact hp and they ask me 280$ for a motherboard change... crazy!!!
Is there any chance to remove my ipaq from trash and give it a second life??? any ideas?help?
Thanks very much
Abs.
P.s. sorry for my english
I see you posted in the thread I had going with a similar problem - unfortunately, I have no other solution than swapping with a second device - on the brighter side - if you purchase one and fix the other one, you can probabley resell one of them for around what you paid for it
Good luck!
It`s not easy to find a used device in italian.. Btw i`ve got a little update.
Now i`m able to flash wme5 original / Aku / and wm6. But i have another problem.. flash process are ok.. on first reboot my ipaq start and at 30% of startup process shutdown... i will work on it..
Abs
good luck and share your experience.
Ok, well if you're able to get it to flash - try flashing back to 1.00.00.L - should boot then. Worked for me - so give it a shot.
I had to reflash to the original rom (no boot, but able to successfully flash in bootloader) - then to 1.00.00.L (boot and hard reset) - then to 1.00.00.H (boot and hard reset) - then to 1.00.25.H (boot and hard reset) - then to WM6 (boot and hard reset) to get everything to work after mine was bricked.
Oh, and if you DO use another device - it doesn't have to be the same language as the original - just swap to the correct file/language at the appropriate time in the flash.

help me plz i am stuck in os screen after try to update from schapes 3.3 to 4.0

hi plz every one who can help me it very urgent..
i try to upgrade my friend htc hermis but i am stuck in os menu
previusly i install scap rom 3.3
i treid to install the new version it reached 2% and the an error massege appear (connection error) then i tried to do it again but evry time i try the same maasege appear on the phone (coonection error )
it reach 0% and this message appear
i have spl 1.09
i also tried to hard spl it but still the same message ...
i treid different usb and pc but still
i download an official rom the same message
i sleep a see the same f*cking message
plz help me
IT Would help if you Gave the Error Message # for Example If your Getting Error Message 240 It's a Connection Problem.
Try Turning of your Firewall, Have the Rom you are upgrading to in your Root Directory And Always Make sure your Phone is Super CID unlocked.
Hope This Helps.....I"ve been where you were at once... IT was the My Firewall for me.
Try flashing your Operator rom using the SD card method. Or looking at the Unbrick table done by POF. It's all in the WIKI...
halder said:
hi plz every one who can help me it very urgent..
i try to upgrade my friend htc hermis but i am stuck in os menu
previusly i install scap rom 3.3
i treid to install the new version it reached 2% and the an error massege appear (connection error) then i tried to do it again but evry time i try the same maasege appear on the phone (coonection error )
it reach 0% and this message appear
i have spl 1.09
i also tried to hard spl it but still the same message ...
i treid different usb and pc but still
i download an official rom the same message
i sleep a see the same f*cking message
plz help me
Click to expand...
Click to collapse
Try booting in debug mode (hold the Side OK button + power button and reset at the same time)
once you booted into that 4 colored screen with SPL/IPL listed, flash the device with HardSPL 0.7
Link Here
Then upgrade your device again.
using HardSPL it ensures your device will not be overwritten with bad blocks and it enables unsigned rom files to be written to the phone. it's a win-win if you upgrade it.
still the same message 262 update error.
i triecthe hard spl but s6s error always appear
i can go to boot screen
plz if there solution tell me..
its not afirewall fault..
halder said:
still the same message 262 update error.
i triecthe hard spl but s6s error always appear
i can go to boot screen
plz if there solution tell me..
its not afirewall fault..
Click to expand...
Click to collapse
This 262 Error Message I got this
""ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.""
At this Point I"m Stumpped I"m hoping one of the Big Boys Will Step in on this one and give you a better Solution....
yes it reached 2% then it stuck there i treid to reupgrade with the same rom no luck..i tried different rom also ..
do u think if i download a shiped htc rom it will work
halder said:
yes it reached 2% then it stuck there i treid to reupgrade with the same rom no luck..i tried different rom also ..
do u think if i download a shiped htc rom it will work
Click to expand...
Click to collapse
Wam7 has already given the best advice to start unbricking your phone.
1. Get the original Rom which came with your phone. It might be listed here http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades or here http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions. If it is not listed you'll need to search the internet and/or this forum.
2. When you have your original ROM, flash it to your phone from the SD card, not from your computer. Instructions to do this are here http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing. Remember to have a full battery charge before beginning.
Hopefully this will recover your phone. If it does, then make sure that you flash Olipro's HardSPL 2.10 (V7) to your phone http://forum.xda-developers.com/showthread.php?t=296722.
If you get stuck on how to do this correctly, there is some good advice in Mrvanx's upgrade guide http://forum.xda-developers.com/showthread.php?t=299462.
Also, in the future it can help others to help you if you give more information about your phone such as phone type, original ROM, current Rom, Radio version, SPL version etc, etc. Most people include some of this info in their signature so they don't have to keep re-typing it.
thank you very much for replaying...
i tried the sd card method and i download my exact cid rom but still it give the error 0068002 i download more than 5 original shiped rom same message
my phone is htc ...tytn ..not qtek or dopod ....
htc pure
info
r 1.18.00.10
g 32.55.7018.01h
d 3.57
m05 s04 b06
any other solution
i can go to boot menu
plz again
i tried evry possible way to flash my phone but i cannt get it done why??? EROOR 262
i download more than 10 official rom (htc) and i apply the exact sd method steps still it give me 0028002 error
my device is HTC ...BUT HTC WHAT I DONT KNOW...IT JUST HTC ONLY
SO I CANNOT CHOOS MY EXACT CID ROM
PLZ HELP ME OR I WILL THROUGH IT AWAY
plz answer me its very urgent?????
ok i dont want to open a new thread with same question.so if some one plz can help i will be graetful....
i want to knew how to fix error 262
Have you tired flashing from the bootloader?
Have you tired flashing just the rom from mitty ?
Is the phone unlocked? Have you thoroughly read the unbricking thread in the wiki?
WB
i dont know if its unlocked but i flash it with chap 3.7 a then i tried to flash it with chap 4.00 it reach 2% and stoped..ofcouse its unlocked..
it tried the mitty way but it give
level=ff instead of 0
and bad command
it tried the sd card method the error 0068002 or invalid vender id
If you get invalid vendor error doesn't that mean the phone is locked?
since no one helped me here in this thread ...i helped my self..
i found the solution...i send my ID to htc.com and they replay nicey and send me the link to my exact cid rom ..
the problem was my original rom was norway not wwe ..**** who thought that???
anyhow thank you for all who tried to help me..really i benfit from thier method for future desaster???
see u in another problem...
cuz we know nothing we just ask and ask until we find the solution ..

ASUS P535 Stuck At Blue Logo Screen, Help Plz

I tried to change language on ASUS P535 from chinese OS to english by following one of the threads in this forum, now phone is stuck at boot asus logo. I update rom by using minsd, pwr+rec+camer+reset. I used WinCE wm5 rom..it ran and got error and freeze at logo..i tried to update with different rom but it wont allow..always says wrong language..anyone knows how to repair since it cannot boot to windows now? thanks
[P535] ASUS P535 Stuck At Blue Logo Screen, Help Plz
good evening everybody ,Sorry for my english , so i m a new member and i have a big problem with my p535 phone , yesterday night just before to go sleeping my phone reset and frooze At Blue Logo Screen on the boot sequense , i tried many times to reset , soft and hard no things , i m stuck serously cause i just bought few weeks ago , and i need it for my work ( the phone has more than 2 years old )if someone can help me plz !!!!!!!!!!!!!!!! ​
did you try hard reset?
pick a rom for your pda, then put it in the memory card and flash it

jasjam and the file Custom_RUU.exe

hello each rom that i download and have the file Custom_RUU.exe
not working on my imate jasjam
whats happening is : the rom start the installing process and when the imate needs to load the boot loader screen (blue red green) just before the process of the rom copying should start the phone goes to sleep mode..
mainly i just want to install energy rom 3.0 on my imate ..
is that problem can be solved ?
bennylu said:
hello each rom that i download and have the file Custom_RUU.exe
not working on my imate jasjam
whats happening is : the rom start the installing process and when the imate needs to load the boot loader screen (blue red green) just before the process of the rom copying should start the phone goes to sleep mode..
mainly i just want to install energy rom 3.0 on my imate ..
is that problem can be solved ?
Click to expand...
Click to collapse
hi dude!
For first time flashing and newbie:
Please flash HardSPL and OEM Stripped AT&T first before you can flash Custom ROMs.
HardSPL link: http://forum.xda-developers.com/attachment.php?attachmentid=37669&d=1177280888
OEM Stripped AT&T: http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
Flashing method :
Withactivesync http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
For How to flashing with MicroSD,http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
And Hard reset after flashing rom
good lucky !
hi!
thanks for the fast replay
ive done exactly as you said but the problem stays ..
if i flashing roms that comes with the file RUUWrapper.exe
i have no problem
is there any convertor that can convert between those types?
Mate, use the sd card method... No problems with syncing ever again...

Categories

Resources