Cannot pass the boot image - JASJAR, XDA Exec, MDA Pro Software Upgrading

I used to have the old rom of Movistar, and i dont know why it couldn't go through the boot image, so i decided to flash to the lastest jasjar WWE rom. I did it successfully, but I have the same problem... i cannot pass through the i-mate boot splash screen. It gets stuck there... what can be happening?

Consider your machine a brick. It needs to go back to the supplier to get the motherboard changed.

bro
can help me for this problem need help
ne tool to repair asking admins password
on stratup

Related

Universal unlocking problem - plz help!!

Hi all!
I have a big problem with my MDA Pro, so I'll apriciate all help that you can give me!
I tried to remove simlock and I flashed 0.00.00 Rom and everything went fine. But then, when I rebooted my device on boot screen I see "No GSM" and can't flash my radio rom again, it just says "Updating radio rom - please wait" and after some time it aborts flashing. Everything else is working fine, all other PDA functions, but my phone is dead... I had original T-Mobile rom instaled on my device and bootloader 1.01.
Plz help guys, don't know what to do!!

Splash screen change

Hi
I've O2 XDA Exec flashed to WM6 ROM. Default Splash screen is gone. How do I get back O2 splash screen. Pls resolve.
Secondly is there any call filtering software working with WM6 ROM (Crossbow Rom Update 2.01.06 WWE). Pls do inform
Thanks
Dinesh
You can create the boot splash, download the following rar and follow instructions
ftp://xda:[email protected]/Universal/Tools_and_Programs/CreateBootScreenPackage.rar
After flash the boot screen to Universal will be hard reset, so please backup data after flash.

Need help ! cingular 8125 bricked :(

Hey iam new to this upgrading,CID unlocking etc.
I just bought my Cingular 8125 three weeks before.
I tried upgrading to WM 6.0 The update process completed successfully but after the reboot my mobile was back to factory default with wm 5.0.
without tring the lokiwiz to unlock, i used shelltools to flash the wm6.0.
it was successful, it asked me to do a hard reset.
Since then i am stuck up with the boot screen.
I can't get my Mobile back working.
i tried flashing with the Offical rom but of no use.
i have tried button rom, love rom. nothing works out.
without much knowledge i upgrade my spl & IPL to 3.08
now i am not able to downgrade that too.
tried flashing different roms but of no use, still it stucks up in the boot screen.
the only hope iam having is i am able to get into the boot loader.
I am not sure, where to post this thread, my appologize if i have posted in the wrong page.
below is the information i have on the screen
IPL 2.26
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Some one please help me out. i am very much worried, any help is very much appreciated.Thanks a bunch in advance !
dosai.
Have you tried flashing from the bootloader to an official rom?
thanks for reverting, i have tried that too, but of no use.
Sounds to me like you didn't run the Cert_SPCS and EnableRapi cab files before flashing with ShellTool. Being stuck at the splash screen is a dead giveaway.
I never did understand why someone would attempt to flash a ROM without doing ALL the steps. . .
i did ran Cert_SPCS and EnableRapi cab before running the shelltool. shell tool took around 10 mins to complete the update.after restart, my phone stucked up in the boot screen!. (i remember not unlocking the cid before proceeding with the shelltool) .
is there any way to get the mobile working i am too worried.
Solution
Hi, press and hold the CamShot Button and press the Power button, when you see a multi-color screen you can make a update again.
Hello all Im new here and have the same problem. I followed all the steps and followed all the instructions to fix this problem but nothing. I am stuck on the multi-color screen and i can't do nothing! HELPPPPPPPPPPPP!

rom doenst want to install

Hello,
With the mtty method, i wanted to install a new rom. I did this a lot of times before so i know how to do it. I copied the rom to the memory and used mtty to instal it. But it keeps get stuck at "loading..." Because the mtty i dont have a rom to start up at the normal way.
When i am at the bios of the tel and connecting by usb to my computer, i also tried to install a rom from the computer, but there it keeps stuck at 0%. When i re-install hard SPL, that goes fine (but my tel. doenst want to boot).
Also i tried a other rom, but that doenst whant to install too.
Can someone help me?
Hi
same problem.
use olinex again.
AMIRHADI DAISY said:
Hi
same problem.
use olinex again.
Click to expand...
Click to collapse
Hello,
I installed olinex hard SPL again, but my tel doenst want to boot. It only shows the "HTC diamond" starting screen.
Fixed! I tried a other hard SPL

Unbricked my phone but now I'm stuck with the chinese firmware [BND-L21]

Hello,
I received my phone two weeks ago (BND-L21 version) and Friday I tried to manually update it to Oreo (with this topic : https://forum.xda-developers.com/honor-7x/how-to/manual-update-to-oreo-beta-emui-8-bnd-t3767044). I don't know what I did wrong but it didn't work (my phone didn't reboot on the stock recovery, only on TWRP). After a few try, my phone wasn't booting anymore, it was stuck on the orange message about the unlocked bootlader and the message "Your device is booting...".
I managed to get it back working with this topic : https://forum.xda-developers.com/honor-7x/development/firmware-updates-link-flash-risk-t3723810. The problem now is that I'm stuck with the chinese firmware (i don't have the Honor animation when my system is booting, I now have an Android logo on a black background). I don't have any Gapps installed and I can't flash anything with TWRP. When I try to flash SuperSU, i have an error extracting ramdisk failure and something with the boot.img.
Now the model of my phone is a generic_a15 and I don't know how to get back on track.
I'm a little bit desperate now, I don't know how to install another firmware. I tried to install this custom rom : https://forum.xda-developers.com/honor-7x/development/openkirin-aosp-8-0-honor-7x-t3746257 but I was stuck on the orange message again.
If anybody knows how to solve my problems, I'll be grateful
Thanks !
[UPDATE] I don't know if someone is reading but now my phone doesn't boot anymore and FRP is locked ?
Call Huawei customer support and get a ticket started to send your phone to the nearest repair center. Best of luck!
Waagic said:
Hello,
I received my phone two weeks ago (BND-L21 version) and Friday I tried to manually update it to Oreo (with this topic : https://forum.xda-developers.com/honor-7x/how-to/manual-update-to-oreo-beta-emui-8-bnd-t3767044). I don't know what I did wrong but it didn't work (my phone didn't reboot on the stock recovery, only on TWRP). After a few try, my phone wasn't booting anymore, it was stuck on the orange message about the unlocked bootlader and the message "Your device is booting...".
I managed to get it back working with this topic : https://forum.xda-developers.com/honor-7x/development/firmware-updates-link-flash-risk-t3723810. The problem now is that I'm stuck with the chinese firmware (i don't have the Honor animation when my system is booting, I now have an Android logo on a black background). I don't have any Gapps installed and I can't flash anything with TWRP. When I try to flash SuperSU, i have an error extracting ramdisk failure and something with the boot.img.
Now the model of my phone is a generic_a15 and I don't know how to get back on track.
I'm a little bit desperate now, I don't know how to install another firmware. I tried to install this custom rom : https://forum.xda-developers.com/honor-7x/development/openkirin-aosp-8-0-honor-7x-t3746257 but I was stuck on the orange message again.
If anybody knows how to solve my problems, I'll be grateful
Thanks !
[UPDATE] I don't know if someone is reading but now my phone doesn't boot anymore and FRP is locked ?
Click to expand...
Click to collapse

Categories

Resources