Hello all,
I have Helmi's WM6 1.1 ROM running for several days now and actually everything is working fine, except one thing: Resco Explorer 2005.
I'm using the default MSBT Bluetooth stack in this ROM, which works perfectly using Bluetooth headsets, wireless stereo headsets and carkits, but in Resco Explorer 2005 the stack seems to be malfunctioning.
In the Resco Explorer you can select one or multiple files and choose for "Send to" ...... in my case I want to choose "Send to Bluetooth recipient", but will immediately get "Bluetooth not activated". Nothing, nada, I can't send any file out by Bluetooth, which ofcourse is activated.
Receiving files works the normal way and I also tried the provided Broadcomm stack. Trying to use "Send to Bluetooth recipient" with the Broadcomm stack initially seems to work, but when I select the found device I want to send to, I still receive an error message "Can't connect to [devicename]".
Please some advice here. Is it Resco? Is it a tweak?
Thanks.
check that you have "receive all beams" on
(in your PDA's settings)
i can confirm the resco problem with sending thru bluetooth..it has nothing todo with "receiving all beams" settings..
No it sure hasn't.
Anyway, I guess there's no solution?
Then I might have to leave Helmi's 1.1 ROM, because this was working with other Crossbow ROM's....
Hi all,
Here's how I fixed it for now...
Helmi's ROM with either the MS or Broadcomm Bluetooth stack obviously can't work together with the Bluetooth file transfer functionality of the Resco Explorer.
Another ROM, for example Midget's can, but this ROM misses the screen rotate icon on the Today screen.
I flashed Midget's Crossbow ROM and restored a full backup made with Helmi's ROM, so the two ROM's now are kind of 'combined'.
The result: Midget's ROM, with Helmi added value like the screen rotate icon AND Resco Explorer that can send files using Bluetooth.
Related
Hi,
Like the subject says really. Can anyone please tell me how to send a file via Bluetooth (not a contact, just a normal type of file i.e. image or whatever). My Bluetooth File Transfer Service is enabled.
I've searched the forums, but can't find anything so I'm sure it's just me and I must be missing something blindly obvious?
Can someone please point me in the right direction?
Thanks!
Whoops that was from me if anyone wants to know who's being stupid :-(
File Explorer -> Click and Hold on file you want to send -> Select "Beam File" and then wait for the list of Bluetooth Devices to appear below the Infrared Section.
Alternatively use Resco File Explorer which has a specific Beam via Bluetooth option and (to me) seems quicker and more reliable (At least to startup).
Erm nope?
"Beam" via File Explorer makes no effort to open a Bluetooth connection (I've got a wireless video sender next to me and everything anything tries to do ANYTHING with Bluetooth it interferes like crazy with the picture)
Also tried Resco and that only has a "Send via Infrared" option. I see no Bluetooth option :-(
This is with an O2 XDA IIs running their software :-( (Although no O2 customisations)
I have GOT to sort my cookies out. Yes above was me again... I think that's 3 posts today I've done as a guest. DOH :-(
Then I'm at a loss as I can do it with both!
I am using Resco v5.12 and the menu item is under Send To > Bluetooth Recipient... if that is of any help.
That's freaky. I see you're not using the standard O2 rom's though. Perhaps something to do with that. I just backed up, did a hard reset and tried again, but still no joy :-(
Is "cooking" my ROM hard/bad? I've seen all the files/documentation on WIKI etc, but mostly just worried about WHICH I should install on it :-(
--Neil
Could be, can't remember now, had so many variants of CE Rom and Ext ROM I have lost track!
We have spent a long time putting together a "Wiki" for the Blue Angel for upgrades etc and I have had no problems yet (I would say it has improved the responsiveness of my device and I no longer have any real issues with Bluetooth, audio or WiFi).
Have a play, you can always go back.
To send a file via bluetooth on Blueangel, first you have to turn on your BT
then open the Bt manager > press on new > choose "Browse files on a remote device > select "All devices"> The BT scan for the online Bt devices> Select lets say "Nokia 7650"> press next >now discovering the device>pair it>a window will appear showing you the files> select the file you want, et voila... :wink:
I also had the problem of not having any option to send files via bluetooth when using the inbuilt file explorer. Consequently, I installed the trial version of Resco Explorer. After using it for a day, I uninstalled it. Imagine my surprise that when I now open my inbuilt File Explorer, I get the option for Send via Bluetooth. I don't know if it's related to Resco or not, but it's worth a try? Just install the Resco Trial Version to ur PDA2K and then uninstall it.
The answer is in this thread: http://forum.xda-developers.com/viewtopic.php?t=17976&highlight=
Hi, i've upgraded my Tytn succesfully to WM6 Black Edition, works like a charm, great performance (better then WM5) only one major problem is that i cannot activate Rsap with "sapsettings" that doesn't seem available. I've downloaded the "ActivateMSBluetoothSAPProfile.cab" from another ROM but that gives an error.
Is there a ROM that has "Sapsettings" in the programs? I'd install that one then.
Any help is appreciated. Thnx.
Hi, I've had the same problem after upgrading my Hermes 300 to 3DES.3
I was missing the SAP or rSAP, which I needed for my Passat.
I found an OEM package here: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal_WM6_Kitchen_Helmi
and downloaded the btsapprofile (direct link: ftp://xda:[email protected]/Uploads/Universal/helmi_c/Kitchen_OEM/btsapprofile.v1.45.rar)
Extract the content of this file to your PC. Copy SAPSettings.lnk to \Windows\Start Menu\Programs on your phone.
Copy SAPSettings.exe.0409.mui, sapsettings.htm, SAPSettings.exe, SALib.dll, BtSim.exe to \Windows on your phone.
Go to Programs on your phone - you should find a working link to SAP settings.
This did the trick for me.
Cheers - mgruett
You are my hero! Works 100%. Thank you!
While looking into this issue i found anothern, maybe easier solution together with my collegues (same problem here, for the VW Passat fleet)
Just open this file, unrar, copy .cab file on your Hermes, execute, softreset and off you go.
http://forum.xda-developers.com/attachment.php?attachmentid=29801&d=1155792304
tested it on 2 Hermes with WM6 and it works flawlessly.
rSAP with TyTN, s620 and Wizard
Hi,
when you're saying "100% working" and "works flawlessly" do you mean you have the Icon in your program folder or is it really working well with your car-kit ? Make phonecalls, Syncs phonebook etc. ???
I've a carkit from THB (bury) since ages in my car and upgraded the phone holders from old nokias up to the LT9100 with rSAP. As rSap pops up, I was 100% sure that this is the solution I'm looking for.
Since 6 months now, I try to get that damn thing working. It always fails with "Sim Card missing / not found". I could pair, it connects to the phone, disables the phone-module, but I couldn't dial a number, nor could I sync the phone book.
I tried it with Blueangel, Wizard, TyTN and my brandnew S620 without succes. I tried it with PPC 2003, WM5 and WM6 Roms, no chance. Of course, I followed the hints in the forum.
I sent the carkit to Bury to upgrade to the latest firmware and guess what ... nothing, always the same problem with Windows Devices, but my Nokia 9300 connects well in a second.
So, bottom line, I'm not sure if it is a Bury Problem with a bad rSAP support for WM or a WM Problem as my Nokia connects well.
Any thought or tipp is highly appreciated
Thanks
Chris
I just tried the download from WDawn (thanks incidentally) and aside from it resetting my background to the windows default, worked just fine. Enabled SAP, gave the phone a poke up the rear and tried it on a Nokia 616 car kit. This car kit uses SAP if available, otherwise falls back to HFP. It quite happily connected via SAP. Next text with be the Mercedes Bluetooth module, which would have to be the fussiest car unit I've ever come across and it only supports SAP (no HFP, HSP.. or other fall back).
The phone used is a DoPod 838 Pro running the newly released official WM6 ROM. I never had this success with the cooked LVSW ROMs that I used in the past.
Alex.
Progress but still troubled
WDawn said:
While looking into this issue i found anothern, maybe easier solution together with my collegues (same problem here, for the VW Passat fleet)
Just open this file, unrar, copy .cab file on your Hermes, execute, softreset and off you go.
forum.xda-developers.com/attachment.php?attachmentid=29801&d=155792304
tested it on 2 Hermes with WM6 and it works flawlessly.
Click to expand...
Click to collapse
Hello!
I have a HP Ipaq 914c and having troubles connecting with the VW Passat.
Here are the steps that I have made so far. Any help will be much appreciated.
1) Initialy on the VW menu searched for BT phones. Detected mine but whenever I selected it, returned back with the message: "Phone not compatible"
2) Dicovered here this tool BTSAP_Test, installed on the Ipaq and activated the "Remote SIM Access" checkbox button
3) VW now is able to pair with the phone (after inputing the 16 code number) but immediatly after pairing says that "Bluetooth is not activated on phone" ...
4) Looking on BT devices in IPAQ I can now see a device named "VW UHV PREM", but the only available service to use for this device is "Dialup Networking".
Am I missing something ? Thanks.
Indeed clicking as much as one time on "Bluetooth Explorer" will cause TomTom not to function properly any more (maps/voices not found etc.).
I have learnt that the hard way!!!
Many members of this forum speculated that the Artemis SD card housing is somehow related to TT's maps to vanish.... NOT TRUE!!!
After a hard reset I have tested that TT was fully functional and I have (intentionally... just to find out) clicked on Bluetooth Explorer and BINGO the TT6.1 maps&voices are GONE!!!
If some of the forum experts would happen to read this and would feel like giving instructions to disable Bluetooth Explorer it would be very helpful.... this will surely avoid SEVERAL hard resets to many people.
I have read that one should go to Settings/Connections then select the FTP tab and uncheck "Enable Bluetooth Explorer" but this is not to be found on my ARTEMIS (P3300)... Let's see if somebody will find a moment to share his/her wisdom with the rookies and shed some lights on this annoying problem.
Cheers!
SiperX
On my Orbit you do the following to disable the Bluetooth Explorer
Settings / Connections / Bluetooth / FTP (tab)
Then select or de-select Bluetooth Explorer.
I appreciate your kind reply Patrick but as you can read in my thread this path (Settings / Connections / Bluetooth / FTP (tab)) is not available in the Artemis/HTC P3300.... Anybody else?
Do you have a comms manager? If so you can access the ftp option of the bluetooth settings from here.
TomTom and Bluetooth explorer both work on my xda orbit.
herghost, what version of TomTom are you running?
I m unable to have Bluetooth Explorer enabled on my Orbit, and get TomTom to find the maps. I am running ver 6.02
perfect, i wasnt able to make tomtom recognize maps on orbit(on universal it works w/o probs) i switched bt expl. off and it works. thx
Guys, there is no doubt. TT (mine is version 6.1) and BT Explorer are NOT going to work together! I am glad to hear that phsnake could get his orbit to resume TT functions.... And (also) I found out that my old rom (the one originally shipped with the P3300) had the path (Settings / Connections / Bluetooth / FTP) to disable BT Explorer (as Patrick_UK explained) ... but the one I am using now does not offer the chance to enable/disable BTE.... any registry master would be kind enough to offer his/her expertise to make this possible? I am not so keen on editing the REG unless I know exactly what has to be done
rom 1.28.0.0 wwe
rom date 11-06-06
radio 02.69.90
protocol 4.1.13.30
ext. rom PDAMobiz.com
SiperX:I'll try today to find reg solution, i cannot promise anything, but i'll do reg export with btexpl. switched on, then with switched off and compare reg.files. hopefully i'll find the right one key.
Phsnake, this sounds like a great idea! Thanks in advance!!! I really hope that you can succeed and give me support in this matter.
By the way where did you find the rom (ROM: DOPOD IPL: 1.25.0001 SPL:1.27.0000 GSM: 2.69.90 OS:1.28.0.0 WWE) you are running now? It sounds lke the right one for my T-Mobile Artemis.
so i compared the regs and diff follows:
Code:
[HKEY_CURRENT_USER\Software\HTC\BluetoothFolder]
"EnableClient"=dword:00000001
"HDEVICE"=dword:00031380
[HKEY_LOCAL_MACHINE\Drivers\Active\68]
"ClientInfo"=dword:00000000
"Hnd"=dword:00031380
"Key"="Drivers\\BlockDevice\\BTDisk"
"Name"="BTD1:"
i guess all U need 2 do is change "EnableClient" from 1 to 0. try it and let us know. (i can disable it thru bt settings). or remove above posted reg entries.
ROM:its standard dopod shipped(the latest one) should be on wm-gurus.com
Thanks man! The registry editing you suggested worked and the BT Expl. is now OFF and TT finds the maps again!!!
But the option to enable/disable the BT Expl. (via BT settings as you say) is still not available any chance you could send me a screenshot of your reg for both [HKEY_CURRENT_USER\Software\HTC\BluetoothFolder] and [HKEY_LOCAL_MACHINE\Drivers\Active\68]?
For your Dopod rom, could you please give me a precise link where I can download it? I could not find it at wm-gurus.com.
Thanks a lot
ftp.wm-gurus.com/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
yes i know that wont allow u to switch off btexpl. thru bt control panel.
Here are regentries U requested, but i dont think it'll help. but try.
Thanks again!
BTW, the same file (ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe) was available at XDA too.... I have tested it a few weeks ago it and -being an AU (Australian rom) my sim (Dutch T-Mobile) did not get registered as the operator is apparently not quoted .... strange that you can use it in Scotland.
For regs I will see what I manage to put together and will let you know... Great (and prompt) support was very appreciated...
Hi again,
I have flashed once more the ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe onto my Artemis and I have (FINALLY) noticed that the SIM does register and I am able to use the phone (incoming & outgoing calls).
The only problem is that every time I reboot I get a notification from the "NETWORK WIZARD" which says "your current operator (20416) is not supported. You should obtain an update from your device vendor".... Any idea how I can get this nag off my back?
Thanks
try to check \windows\startup
I have deleted (& made a copy for backup) these 5 files:
netwiz.cpl
netwiz.dat
netwiz.exe
netwiz.exe.0404.mui
netwiz.ini
from the Windows folder of my Artemis.
After rebooting the Network Wizard notification does NO LONGER pops up!!!! So I would say "Problem solved", right?
I am glad that -thanks to the recent communications we exchanged- you "inspired" me to give one more try to the Dopod rom and I finally seem to have found what I wanted.
Only one final point: In other roms if you click on the phone signal bar you get the option to turn on/off the flight mode and if you click on the icon on the right of the phone signal bar you culd turn on/off the WiFi... in this rom you get a small (blue) Comm Manager link to follow in order to enable/disable these functions.... did you find any faster ways to activate WiFi or Flight mode? May be they can be added to the voice commands?
Cheers
u can use phonealarm-some skins supports one click wifi, gprs,btooth switch,
I saw phonealarm but I have decided to spend the end of the weekend configuring my newly installed rom (immediately after I will make a Sprite backup) and along the way try to think of something to keep to a minimum the amount of additional SW installed. What do you think if I use "tray launch", would that allow me to make the necessary shortcuts?
By the way (with previous roms) I kept my Artemis overclocked at 240 Mhz and it was pretty stable, did you test any higher frequency on the Dopod rom?
Hello,
I have really a strange issue. I am unable to "beam" the images from Touch HD to Bluetooth enabled PC using Bluetooth. I tested against two PCs and it never worked. The activesync works ok. But i don't want to use activesync... as it's a bit of overkill - i am looking for a out of a box solution that will possibly work with every pc everywhere... last time i ended up with mailing the images by email =))
Both sides have bluetooth enabled in visible mode, i am using either resco or wm file explorer beam function, then the list of visible bluetooth devices appears, but when i select the PC it always fails. =((
I remember there was some issue of "too much services pc provided", but i am unable to remove services provided by the pc i have no use for as FAX for example. On both PCs there's bluetooth stack by Widcomm, once branded for IBM and once for HP.
I have a PC with integrated bluetooth module and a Microsoft driver. If I right click on the Bluetooth icon in the system tray (lower right near clock), I can select "receive a file" which brings up a little wizard that waits for you to beam your picture. Maybe your Bluetooth device also has this software. I use ActiveSync for several pictures because in the long run it's quicker.
PGMMA, yes, but this is about widcomm driver... not ms... =(
Activesync is OK, but won't work on a PC without Activesync - i had an issue, when i want to send a image/file to a friend. No luck. The Bluetooth Stack Tray icon gets green for a sec, then white again with no message what so ever.
The other computer now requires pairing all the time, but i am sure i can handle that later. =)
Well i tested dryar 1.6 (i was unable to find the version 2.0 which should be on dryar.com) without a luck, but was able to make at least part of the bluetooth ftp explorer working (HTC_BT_FTP_Explorer_1.2.30489.cab)
i can share my files on cell phone, but i am unable to browse others after installing this file (couldn't enable the explorer in the ftp tab), when i click the icon in programs nothing happens.
anyone has a bt explorer fully compatible with blackstone / touch hd?
tried all versions from here, but simply \windows\btftpclient.exe won't start =(
http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=3121049
identically problem
There is NO working BT Explorer client for the Touch HD. I called HTC 2 weeks ago about this issue. They said that it's not supported with the current ROM, but they did say that they are building a new ROM to be released shortly & it WILL have BT Explorer support.
Vampire2800 said:
There is NO working BT Explorer client for the Touch HD. I called HTC 2 weeks ago about this issue. They said that it's not supported with the current ROM, but they did say that they are building a new ROM to be released shortly & it WILL have BT Explorer support.
Click to expand...
Click to collapse
I did attach the BT explorer that I using.
BT Explorer
Hi, So could you tell me did they fixed the problem, becouse my Bluetooth Explorer on HTC HD wouldn't start. I mark strat using BT but after click ok it's still unchecked !!! so finally is it solved this or not becouse it's a really disapointed accourding the price of this device.
Thanks
Vampire2800 said:
There is NO working BT Explorer client for the Touch HD. I called HTC 2 weeks ago about this issue. They said that it's not supported with the current ROM, but they did say that they are building a new ROM to be released shortly & it WILL have BT Explorer support.
Click to expand...
Click to collapse
gpaunescu said:
I did attach the BT explorer that I using.
Click to expand...
Click to collapse
It didn't work here? I got only the wait cursor for 2 seconds and nothing else...
SOLVED!! with help of kwbr,releasing his t8282 kitchen, btftp version is 1.2.37656.91, searching internet ,i find cab, it's simply to find :
h%ttp://ishare.iask.sina.com.cn/f/22305165.html
thank you kwbr
If I try to send a file by BT directly in Resco Explorer 2008 v7.5 by selecting Send To > Bluetooth recipient I get an error message "Bluetooth device-activation failed. Switch on Bluetooth manually. Do you want to disable Bluetooth functionality? YES / NO"
(message text could be slighty different as I am using Dutch language)
If I select yes, it defaults back to Explorer view (of course) and Send to > Bluetooth recipient option is now greyed out.
If I select no, it continues to a screen titled "Send file(s) (OBEX)" with a list selection window view titled "Select device:". The window only a line "search" as if it is a link but nothing happens when I touch it and besides it doesn't list any nearby devices, just stays empty. Left soft key says "Send" and right soft key says "Cancel".
I've done some reading here on XDA and on the Resco site and came accross similar problems, where some stated I should uncheck the "Use IrDA trough OBEX" setting in the General options section wherafter I should select Send to > IR recipient instead of BT recipient to send my files.
If I try this it shows a different discovery window with a Bluetooth icon named Search and a progress indicator ( . > .. > ... ) but still no nearby device is found.
Do I have to update the BT stack to get this working? Any other hints or tips? Thanks!
Bad Bluetooth Stack
I have the same problem and have not found a solution as of yet. Not to impressed with the stock Bluetooth. There are some devices I have not been able to connect to which worked flawlessly with the TouchPro. Anyone know of any Bluetooth fixes? I don't like HTC's control of the Bluetooth devices.
I'm having the same problem when trying to exchange file(s) with another phone via bluetooth. Resco Explorer don't recognize TP2's Bluetooth. If any of you can teach me how to transfer for example a cab file via bluetooth to another phone will be great!!! I can't do that in the Send Object function in the Default Bluetooth App.
use the normal file explorer. click and hold on the file. there is an option to send via bluetooth in the context menu.
Seifer1975 said:
use the normal file explorer. click and hold on the file. there is an option to send via bluetooth in the context menu.
Click to expand...
Click to collapse
I know it works with normal Windows explorer but I want to use Resco... have you ever tried to access the Windows folder with Windows Explorer? Then you know what I mean...
Read somewhere Resco deosn't recognize the new blue tooth stack used in TP2. Therefore, u need to use default explore or wait for new version.
st8800 said:
Read somewhere Resco deosn't recognize the new blue tooth stack used in TP2. Therefore, u need to use default explore or wait for new version.
Click to expand...
Click to collapse
I was affraid so.... anyway I will be waiting for it if anyone has a solution in the mean time please reply!!
Not only Resco Explorer, but Resco Photo also facing the same problem
SEQ said:
Not only Resco Explorer, but Resco Photo also facing the same problem
Click to expand...
Click to collapse
That figures... I can't understand why HTC has chosen this BT stack instead of the one supplied with Blackstone for instance...
It is because Rodhium has got 2.1 Blutooth capability wich is not driven by the official Microsoft Blutooth stack (only 2.0). We have to wait for WM 6.5 to have the microsoft stack back, maybe... i hope so...