Hi!
Can you tell me how can I to upgrade my HP iPaq h1940 yo Windwos Mobile 5.0?
Regards.
Impossible, sorry. The 1940 has 32M flash ROM. If there were a (striped-down) WM5 distro (there isn't - not even a WM2003SE upgrade) for the 1940, it still wouldn't leave much flash ROM for the central storage (even 64M devices have pretty low free storage).
Related
Hi,
I would like to downgrade my qtek 9100 device to WM 2003 because I use Linux (Ubuntu) and wm 5 doesn't work with Synce.
I have two question:
1/ Is it possible to downgrade the Qtek 9100 to wm 2003?
2/ I found by this forum this page: http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
But the instrictions tell I have to download a wm2003 ROM here:
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
I don't know what is the correct ROM for my device.
Thanks
Sorry for my bad english
Neeux
i'm pretty sure there never was a 2003 rom for 9100 / wizard devices
BA == blue angel == Qtek 9090
If you have a Qtek 9100, that's a Wizard, not a Blue Angel, and there's no WM 2003 rom to flash it.
ok
Thank you very much
I must wait the wm5 support on Synce...
neeux said:
ok
Thank you very much
I must wait the wm5 support on Synce...
Click to expand...
Click to collapse
Or install windows.
It makes a lot more sence than downgrading your device, even if you could.
Hi
I´ve a ipaq 3870 that i upgrade from windows ce 3.0 rom 2.0 to windows ce 4.2 rom 4.0 eng.Can anyone tell me if it´s possible to get another upgrade to windows mobile 2003 se or beter windows mobile 2005?
Thank´s for an answer
Not sure about 2003SE (probably not) but you definitely can't upgrade to WM5.
P.S.
It's actually Windows Mobile 2002 / 2003 / 2003 SE / 5. Win CE is the base fro the system but it is a different thing.
Hi
Thank´s to replay.My question is supported on web page http://www.mobile-review.com/pda/articles/wm2005-magneto-en.shtml
and "Currently the OS is called Windows Mobile 5. Most likely by the release Magneto will have the commercial name Windows Mobile 2005. The system requirements are as follows: 32 MB of Flash ROM, 64 MB of RAM. As for the processor, the old requirements are valid, i.e. Magneto will have acceptable performance at 200 MHz."
regards
Nice of them to put system requirements on it for the consumer
The thing is WM 5 is not a generic OS like desktop windows so you can't just download and install it. HP has to create an image for your specific device and they only offer upgrades for the 27xx and 47xx series devices.
You can check their site. If an update exists it will be there.
jbsp said:
Hi
I´ve a ipaq 3870 that i upgrade from windows ce 3.0 rom 2.0 to windows ce 4.2 rom 4.0 eng.Can anyone tell me if it´s possible to get another upgrade to windows mobile 2003 se or beter windows mobile 2005?
Thank´s for an answer
Click to expand...
Click to collapse
Nope, the 3870 "only" received the WM2003 upgrade, nothing further.
Thank´s all for replay
IPAQ 3870 portuguese - Rom version non compatibility
I have an IPAQ 3870, with Pocket 2002, with ROM version 2.20 language 1 (portuguese). Trying to upgrade to Pocket 2003, using an upgrade acquired at the web, with Rom version 4.0 language: english, there were a non compatibility and no success in upgrading to Pocket 2003.
How can I solve this to use Pocket 2003?
WM6 for hp ipaq h6340
It is possible to flash this device with the new wm6? And if it is, which rom have to download?
I think the h6340 like the h65xx will never work WM5 or WM6.
They only have 64 Mb of flash.
The rational is simple. As WM5/WM6 have persistent memory (where WM2003 didn't), they require a minimum of 128 MB flash when you have 64MB of RAM.
Sorry for the bad news...
--eluth.
I have a pocket pc hp jornada 568 with rom flash and processor 64mb and operative sistem pocket pc 2002. I need o.s. pockt pc 2003 or upper. The HP company don´t have this upgrade for this model and i need to know if there are another way to make this upgrade?
No. Nice device though it is no one is trying too cook ROMs for it because it is just too old.
Hi i have a iPaq hx2110 that comes with WM 2003 SE preinstalled. I have read that there are other roms for this pda, such as WinMo 5 / 6.1 / 6.5, but what is the version of Windows Mobile that can ensure a better power saving? Thanks
No one can help me?
Edit: i'm reading some guides for upgrade my 2110 to wm5/6, but most of them starts with a PRE-BL version "1.00.04", while mine is "1.00.02", with WM 2003 SE... How can i do?