Remove operator startup logo - Upgrading, Modifying and Unlocking

Hi guys,
my operator has set a startup logo when you turn on the phone. How do i remove that? Thanks!

Related

How to disable startup animation/sound on Tilt 2?

I thought this could be done in Advanced Config, and I did disable the Shutdown animation from there, but couldn't figure out how to disable the startup animation.
Is there a better way than replacing the file with something else? Empty string?
I used DiamondTweak, worked like a charm.
I still have the problem that my screen goes blank after only 30 sec of inactivity. Do you have that problem too?
electron73 said:
I used DiamondTweak, worked like a charm.
I still have the problem that my screen goes blank after only 30 sec of inactivity. Do you have that problem too?
Click to expand...
Click to collapse
Hmm, will check that out.. I know there was some tool floating about which seemed to work but caused people trouble but I can't recall what it was now, but it seems like it was screen or sound
No, my screen stays on for as long as I have it set.. I'm using phoneAlarm to do it, so not sure if that matters.
Anywho, thanks for the tip!
In Advanced Config 3.3 go to HTC Animation & change Startup GIF/WAV & Shutdown GIF/WAV
Any other way to disable the startup other than replace what is there with something else? I have the shutdown animation disabled, which was easy. Now just need the startup taken care of.
You don't have to replace what's there, just use advanced config to select somethign else.
I found an HTC logo and converted it to a GIF as well as a PNG for startup/shutdown. Selected some sort of beep for the startup sound and now it's much less offensive.
What I'd like to know is how to replace the "AT&T world phone screen that loads sorta liek the bios for a PC.
you can try " Sktools " , V4.4.7.*
search for it here , or google ...
I also use Diamond Tweak for disabling the startup animation and sound -- could never get it to work in ACT.
SoapDoctor said:
What I'd like to know is how to replace the "AT&T world phone screen that loads sorta liek the bios for a PC.
Click to expand...
Click to collapse
You need to create a GIF, BMP, or JPG file that's 480 pixels across by 800 pixels vertically. This will be what eventually shows up as your initial splash screen. Then, you open the image file you created with this, and convert it to a .nb file. Then, use this to convert the .nb you just created to a flashable .nbh file. Flash the .NBH with any Rhodium CustomRUU and you're all done.
Standard Disclaimer: If you brick, it's not my fault, blah blah blah. (Even though you shouldn't; I've used these tools a ton with my Kaiser with no problems whatsoever)
on the Hermes there was just a simple regkey to disable the startup animation.
no ones knows the regkey to disable startup and/or shutdown animation on the rhodium???
HKLM\Software\HTC\HTCAnimation
-replace StartupGif with a blank (ie: erase the \windows\att_warhawk_boot.gif)
to remove the animation
-replace StartupWAV with blank ("") ie.. erase \windows\att_warhawk_boot.wav)
to remove the annoying startup sound
I just deleted the StartupWAV value and sure enough it disables the startup sound. Thanks!
myknyte said:
HKLM\Software\HTC\HTCAnimation
-replace StartupGif with a blank (ie: erase the \windows\att_warhawk_boot.gif)
to remove the animation
-replace StartupWAV with blank ("") ie.. erase \windows\att_warhawk_boot.wav)
to remove the annoying startup sound
Click to expand...
Click to collapse
myknyte said:
HKLM\Software\HTC\HTCAnimation
-replace StartupGif with a blank (ie: erase the \windows\att_warhawk_boot.gif)
to remove the animation
-replace StartupWAV with blank ("") ie.. erase \windows\att_warhawk_boot.wav)
to remove the annoying startup sound
Click to expand...
Click to collapse
can you please tell me if this starts the phone up quicker or just gets rid of the animation?
thanks

what do i do now? help

ok, i port the xdandroid to my tp2 but wen its booting up the windows lock screen came on but the numbers change or something i cant unlock the screen did the number change pattern or something how do i fix that my phone is ringing but i cant unlock the screen
You're doing it wrong
Remove the SD card and reboot. Return to Windows Mobile and remove the PIN lock before running Haret.

[solved] HTC Desire blocked : white screen HTC

I re-post the solution of my problem : it was lost yesterday due to server problem
My HTC Desire was blocked after I change 2 time the SIM card.
It was only for a GSM provider test, not for a HTC Desire problem...
2nd time I change the SIM card, the HTC stop to boot, blocked with the White screen with HTC logo.
Of course, I try to remove battery, retry... but always blocked.
I can go in the boot menu in holding the "Volume down" key during the boot process.
I try "Recovery", but blocked too with the Recovery logo /!\ in red
Yesterday, I post a question on this forum, and someboddy reply me to try to completly erease the configuration data and cache.
I try this solution : in the boot menu, I go to "Clear Storage" option
and IT WORKS !
After, the HTC reboot and the Cyanogen mod run correctly.
Of course I need to reconfigure my Google account, and reinstall the applications. But it's not too difficult, and my HTC Desire in Ok now !
Why I have this problem ?
I don't know...
Perhaps I remove the battery just to quickly after I change the SIM card for the 2nd time ?
Thanks for your help

[Q] NO OPERATOR LOGO on CM9

Hi, I'm using the latest CM9, which is FXP114. and I have a problem with the operator logo when I slide down the notification bar. It's should said my operator name below. but it's said "NO SERVICE". why is that happen? I try turn on the airplane mode ON and turned it OFF again. and the operator name shown up just about 1 sec and then it goes back to "NO SERVICE".
sorry for my weak english.

lg g3 850 removing att logo on startup

hello i have successfully removed the bloatware, i have a question is there a option to remove the att logo and sound when the phone starts (after the lg screen) thanks
media
jlugo98 said:
hello i have successfully removed the bloatware, i have a question is there a option to remove the att logo and sound when the phone starts (after the lg screen) thanks
Click to expand...
Click to collapse
hello i finally don it, systems/ media and startubatt bla boa
Download a new boot animation. Then backup the old one and move the zip into system/media and set permissions to 644 rw-r-r

Categories

Resources