Develop Bugs

How to disable startup animation/sound on Tilt 2?

I thought this could be done in Advanced Config, and I did disable the Shutdown animation from there, but couldn't figure out how to disable the startup animation.
Is there a better way than replacing the file with something else? Empty string?

I used DiamondTweak, worked like a charm.
I still have the problem that my screen goes blank after only 30 sec of inactivity. Do you have that problem too?

electron73 said:
I used DiamondTweak, worked like a charm.
I still have the problem that my screen goes blank after only 30 sec of inactivity. Do you have that problem too?
Click to expand...
Click to collapse
Hmm, will check that out.. I know there was some tool floating about which seemed to work but caused people trouble but I can't recall what it was now, but it seems like it was screen or sound
No, my screen stays on for as long as I have it set.. I'm using phoneAlarm to do it, so not sure if that matters.
Anywho, thanks for the tip!

In Advanced Config 3.3 go to HTC Animation & change Startup GIF/WAV & Shutdown GIF/WAV

Any other way to disable the startup other than replace what is there with something else? I have the shutdown animation disabled, which was easy. Now just need the startup taken care of.

You don't have to replace what's there, just use advanced config to select somethign else.
I found an HTC logo and converted it to a GIF as well as a PNG for startup/shutdown. Selected some sort of beep for the startup sound and now it's much less offensive.
What I'd like to know is how to replace the "AT&T world phone screen that loads sorta liek the bios for a PC.

you can try " Sktools " , V4.4.7.*
search for it here , or google ...

I also use Diamond Tweak for disabling the startup animation and sound -- could never get it to work in ACT.

SoapDoctor said:
What I'd like to know is how to replace the "AT&T world phone screen that loads sorta liek the bios for a PC.
Click to expand...
Click to collapse
You need to create a GIF, BMP, or JPG file that's 480 pixels across by 800 pixels vertically. This will be what eventually shows up as your initial splash screen. Then, you open the image file you created with this, and convert it to a .nb file. Then, use this to convert the .nb you just created to a flashable .nbh file. Flash the .NBH with any Rhodium CustomRUU and you're all done.
Standard Disclaimer: If you brick, it's not my fault, blah blah blah. (Even though you shouldn't; I've used these tools a ton with my Kaiser with no problems whatsoever)

on the Hermes there was just a simple regkey to disable the startup animation.
no ones knows the regkey to disable startup and/or shutdown animation on the rhodium???

HKLM\Software\HTC\HTCAnimation
-replace StartupGif with a blank (ie: erase the \windows\att_warhawk_boot.gif)
to remove the animation
-replace StartupWAV with blank ("") ie.. erase \windows\att_warhawk_boot.wav)
to remove the annoying startup sound

I just deleted the StartupWAV value and sure enough it disables the startup sound. Thanks!
myknyte said:
HKLM\Software\HTC\HTCAnimation
-replace StartupGif with a blank (ie: erase the \windows\att_warhawk_boot.gif)
to remove the animation
-replace StartupWAV with blank ("") ie.. erase \windows\att_warhawk_boot.wav)
to remove the annoying startup sound
Click to expand...
Click to collapse

myknyte said:
HKLM\Software\HTC\HTCAnimation
-replace StartupGif with a blank (ie: erase the \windows\att_warhawk_boot.gif)
to remove the animation
-replace StartupWAV with blank ("") ie.. erase \windows\att_warhawk_boot.wav)
to remove the annoying startup sound
Click to expand...
Click to collapse
can you please tell me if this starts the phone up quicker or just gets rid of the animation?
thanks

G pro, spyware

To start off,
i would like to say im not some kind of paranoid freak who thinks the gov or ordinary people around me is spying on me.. lol
Im fairly new to this android world, and got this phone, less than a month ago. from a ... doubtful friend.
The phone always booted twice on startup, and it installed apps with out telling me like "Muted camera".,,which i caught probally by rebooting the
phone right after reset. and a error popping up, that the install file was invalid.
I rooted it (I think.. I rooted it.. or could be PRE rooted. Never checked) ,
checked system but couldn't find out anything useful..
i deleted all the dalek? cache and factory reset, formatted external sd in cwm
but still.. freaked out when i found out that my personal files.. such as photos videos were still present (was on the internal memory)
the external, was formatted..
so i got the lg firmware update on pc
put the kdz file,
settings were:
3g QCT & mode was CS emergency
ran it in Download mode.
Still.. this seemed to only reset the system settings..
the phone itself wasn't wiped..
However, after i reset it with kdz file
The security? error of some sort popping up between the two reboot, was gone. however the two reboot was still present,.
Before;
Turn on phone => security error, (in terminal typed ..interface with black background) => phone shutdown => boot again automatically => LG logo => turn on
After the kdz file recovery:
Turn on phone => Lg logo => phone off => on again automatically with lg logo => lg boot animation and normal booting
Now, my ram and battery usage is still abnormal.
resetted the phone in software os level, (in settings)
Nothing.. seems to help
any.. suggestions?;;

LG G4 H815 - Optimizing Apps & Reboot after build.prop edit. Bootloop?

Hey,
I have a LG G4 H815, rooted, bootloader unlocked everytime I boot my phone it optimize apps, reboot, optimize apps, reboot, optimize apps reboot... Before this happend I edited the following line in **build.prop**:
persist.splitwindow.support_all=false to
persist.splitwindow.support_all=true
Okay, I did a hardware reset by pressing volume down and power button, but nothing happens. Unfortunately it don't even shows TWRP. It still says optimizing app 1 from 100. Is there a way to delete all apps and do a full hard reset? Will LG repair my phone? My PC don't recognize my phone. I am not able to answer on this topic until 27.02, because I am not home. I hope somebody got an idea. Thanks.

LG G4 half-bricked / full unusable

Hi everybody !
I usually (always normally) succeed myself at resolve my phone problems, but this time I can't do anything.
My problem :
I have a LG G4 ; I saw an update of Imperium Rom (v8) this morning, so I installed it, everything worked well until I decided to install a, apparently, ****ed mod on xposed ; and since I have rebooted I can't do anything ; the LG logo shows and just after "UI system as stopped", just one time but, then I can't do anything, screens over screens, can't access parameters, password required, "flex mode" (never saw this before), re-password, system UI restart, loading background, restart system UI; and this in a infinite loop SOOOOO
I decided to reset it, yeah... But I can't access my recovery, wow o/
I followed the step to access it by switch it off and press volume down etc --> It just boot normally, or best in safe mode by magic but same problem ; via parameters but I can't access parameters ; and via ADB buuut my phone isn't recognized even with the complete sdk, drivers, everything you want, there's nothing to do because --> while restarting system UI it deconnects so of course it can be recognized
I removed xposed (while I could still access recovery, as I was thinking it was coming from the xposed module) and so now I can't even access recovery via shutdown menu (as I had put "reboot to recovery" in via Xblast, a xposed module) ; and of course it doesn't change anything
I neeeeed your help so much, I don't mind losing what's on it :crying:

Naerade said:
Hi everybody !
I usually (always normally) succeed myself at resolve my phone problems, but this time I can't do anything.
My problem :
I have a LG G4 ; I saw an update of Imperium Rom (v8) this morning, so I installed it, everything worked well until I decided to install a, apparently, ****ed mod on xposed ; and since I have rebooted I can't do anything ; the LG logo shows and just after "UI system as stopped", just one time but, then I can't do anything, screens over screens, can't access parameters, password required, "flex mode" (never saw this before), re-password, system UI restart, loading background, restart system UI; and this in a infinite loop SOOOOO
I decided to reset it, yeah... But I can't access my recovery, wow o/
I followed the step to access it by switch it off and press volume down etc --> It just boot normally, or best in safe mode by magic but same problem ; via parameters but I can't access parameters ; and via ADB buuut my phone isn't recognized even with the complete sdk, drivers, everything you want, there's nothing to do because --> while restarting system UI it deconnects so of course it can be recognized
I removed xposed (while I could still access recovery, as I was thinking it was coming from the xposed module) and so now I can't even access recovery via shutdown menu (as I had put "reboot to recovery" in via Xblast, a xposed module) ; and of course it doesn't change anything
I neeeeed your help so much, I don't mind losing what's on it :crying:
Click to expand...
Click to collapse
Please ensure you REALLY use the correct key combo! Just saying bla does not tell us what exactly you tried.
If you really can't get in you can try to Boot into download mode
https://m.youtube.com/watch?v=0cbLhpWq5C8
Then use lgup to reinstall stock ROM and do all the stuff again to get twrp, root and a custom ROM.

Naerade said:
Hi everybody !
I usually (always normally) succeed myself at resolve my phone problems, but this time I can't do anything.
My problem :
I have a LG G4 ; I saw an update of Imperium Rom (v8) this morning, so I installed it, everything worked well until I decided to install a, apparently, ****ed mod on xposed ; and since I have rebooted I can't do anything ; the LG logo shows and just after "UI system as stopped", just one time but, then I can't do anything, screens over screens, can't access parameters, password required, "flex mode" (never saw this before), re-password, system UI restart, loading background, restart system UI; and this in a infinite loop SOOOOO
I decided to reset it, yeah... But I can't access my recovery, wow o/
I followed the step to access it by switch it off and press volume down etc --> It just boot normally, or best in safe mode by magic but same problem ; via parameters but I can't access parameters ; and via ADB buuut my phone isn't recognized even with the complete sdk, drivers, everything you want, there's nothing to do because --> while restarting system UI it deconnects so of course it can be recognized
I removed xposed (while I could still access recovery, as I was thinking it was coming from the xposed module) and so now I can't even access recovery via shutdown menu (as I had put "reboot to recovery" in via Xblast, a xposed module) ; and of course it doesn't change anything
I neeeeed your help so much, I don't mind losing what's on it :crying:
Click to expand...
Click to collapse
can it enter download mode.. if so use LGUP and KDZ file.
to enter download mode press vol key up connect usb. youll see it on screen. then flash it using KDZ

raptorddd said:
can it enter download mode.. if so use LGUP and KDZ file.
to enter download mode press vol key up connect usb. youll see it on screen. then flash it using KDZ
Click to expand...
Click to collapse
Thank for your answer ! No it couldn't even boot in download mode
I resolved my problem by forcing again the buttons to reset completely, it finally showed me after about 30 boots or more the reset screen, I said "ok" ; and in fact it just rebooted saying "updating Android", I did not lost anything.
I still don't understand how it happened but anyway !
I don't know if it's possible to set the topic as resolved ? I don't find it

LG G3 Stylus D690 | Assistance

I recently rooted my LG G3 Stylus. One of the first things I did was download customization applications such as gravitybox and boot animations. However only some of the many options in gravitybox actually worked on my phone. The majority of the settings did not alter how my phone looked when I changed them. Only a few options actually worked for me such as changing the color of battery percentage while charging other status bar settings. I tried to goto the notifcations and lockscreen options but almost all of them didn't work. I didn't bother trying options that came after. When I installed a boot animation it would not show up unless it relatively long because my phone runs the brand LG G3 Life's Good powered by Android logo before all the boot animation's I've installed. I've tried to do it manually by moving the bootanimation.zip file into /system/media but I cannot get rid of the LG G3 logo. I've even looked to see if there a bootanimation.zip in /data/local because I've read that the phone executes bootanimations from that directory before the /ststem/media but there was no zip file there. I've also tried to enable the advanced power menu but my stock power menu would always show up displaying only power off, power off and restart, and turn on airplane mode. I've used three different applications to try and enable the power menu but none of them have worked.
Any suggestions would be appreciated.