Develop Bugs

Using Windows Vista

I just post this thread in order to help others which are having the same problem as I am and to avoid looking arround on all the posts for this answer.
I'm so happy that I've not yet test this procedure wanted to share with you ASAP.
Thanks pvdhelm
pvdhelm said:
Follow these instructions and your vista problem is over.
I used this guide and it works for my artemis p3300 phone!
Please try downloading the latest WMDC first before attempting anything in this section of the guides. you will find the latest version HERE .
To follow this guide please make sure you have a copy of WinRAR installed, I will refer to the Windows Mobile Device Centre as the WMDC for ease of reading. If you do not have the WMDC installed please go here to install it first.
One problem with windows VISTA is that it uses the new "Windows Mobile Device Centre" and not activesync which we are used to, thus our standard RUU programs will not upgrade our Hermes devices as in windows XP. This guide will show you how to configure VISTA to work just the same as XP with our RUU programs.
For this guide firstly you need to download the new drivers:
Drivers for Windows Vista x32
Drivers for Windows Vista x64
Please note the x64 drivers are unsigned so to use them successfully you must disable driver signing.
Extract the contents to a folder on your desktop, call this folder "AS_DRIVERS". It contains the drivers from activesync which we will use instead of the native VISTA WMDC drivers when the device is in bootloader.
Now you must enter the bootloader on your device, to do this press and hold both the side ok button and the power button then put your stylus into the hole on the bottom of the device, your device will reset and show the red blue green bootloader screen. LEAVE THE DEVICE IN BOOTLOADER MODE and connect it using the USB cable to your VISTA PC.
Now navigate into the WMDC (Start>All Programs>Windows Mobile Device Center) and click on the "connection settings" menu icon
In the connection settings menu untick "allow USB connections" then press OK.
Now exit the WMDC and return to the desktop, go into the start menu and type "Services", this will take you into the local services dialogue and show a list of all services either running or registered with your pc.
Scroll down the list and make sure these services are present:
Windows Mobile-based connectivity
Windows Mobile 2003-based connectivity
If these services are not started then double click each one and set them to Automatic start by clicking the "startup-type" drop-down menu and selecting automatic then click the start button in the same window, apply the setting by pressing OK. Now return back to the desktop again.
Go into the start menu and type "Device Manager" then run, this will take you into the device manager. Click the "+" symbol next to "Mobile Devices" and double click on "HTC USB Sync".
This will bring up the properties of the currently connected device (the hermes in bootloader).
Go to the "Driver" tab and click "Update Driver".
Click "Browse My Computer for Driver Software".
Select "Let me pick from a list...."
Click the "Have Disk" button.
Click "Browse" and navigate to the AS_DRIVERS folder we created earlier.
Vista x32 users select the file "wceusbsh.inf"
Vista x64 users select the file "wceusbshx64.inf"
Then click Open.
click next and the driver will be installed (wait a moment).
Press close and escape back to the desktop now.
Now we must stop the WMDC process, start the task manager by pressing Ctrl+Shift+Escape.
click the WMDC line and click "End Process". In the confirmation window, again press End Process.
Now re-enter the WMDC and re-enable USB connections (click connection settings and tick the box "enable USB connections").
Your RUU programs for HardSPL/Radios/WM6 ROMs should now run as desired once you are synced with WMDC. Since we have updated the driver which vista uses when the device is in bootloader mode.
NOTE:: This technique is still in testing so if you have any issues please post in the official thread. Until we find another way to get RUU working with vista you may need to revert back to XP for upgrading your Artemis.
Click to expand...
Click to collapse
Just test it without any problem. I confirm the feasability of this procedure.
It rocks!
Always restart after before trying. It has worked with me.

Ha, Well I have tested and all works well, after this I've flashed USPL and B&B 3.7 ROM with no difficulty.

Now if I could only figure out why Mobile device Center will not install properly on my Vista Ultimate that I just 'upgraded' to today. It connected once, ran the sync but did not back up the contacts on my phone to outlook, and now on subsequent tries, the program wont open because of 'unknown problems'.
Maybe it's a sign to roll back to XP.

uninstall wmdc and then re-install. I had this error at first but fixed now.

Shand359 said:
uninstall wmdc and then re-install. I had this error at first but fixed now.
Click to expand...
Click to collapse
I had a feeling, I did that procedure once already with redundant results....but then again, half of my peripherals such as DVD-ROM, or wireless card didn't work, but then miraculously started working just as I was about to teach my laptop how to fly.
I will keep trying, thank you.

itschase said:
I had a feeling, I did that procedure once already with redundant results....but then again, half of my peripherals such as DVD-ROM, or wireless card didn't work, but then miraculously started working just as I was about to teach my laptop how to fly.
I will keep trying, thank you.
Click to expand...
Click to collapse
I'm not sure if that is the problem, but did you tried after restart vista?
When I made the procedure it was not working and then tried to restart and it was perfect.

Bluetooth sync works fine, but USB won't load driver. WM5 OEM, so no bootloader on my 8525. Will this solve my USB problem?

Hmm .. tried to follow the process above and Vista told me I already had the most recent version of the driver .. strange huh ?

For French :
http://www.forummobiles.com/index.php?showtopic=136003&hl=nuls

scratch that .. i missed a bit

Shand359 said:
uninstall wmdc and then re-install. I had this error at first but fixed now.
Click to expand...
Click to collapse
Agreed. Some 'versions' of windows Vista have WMDC built in, it is no good, uninstall WMDC and download the version from MS web site. Once installed run Windows Update.

owencutajar said:
Hmm .. tried to follow the process above and Vista told me I already had the most recent version of the driver .. strange huh ?
Click to expand...
Click to collapse
I had this issue too, uninstall vista drivers first, then install those from XP.

I followed these directions to update my Himalaya/Alpine-like i-mate PDA2 with disappointing results -- at first. WMDC claimed there was an error and I could not get it to respond. I flounced away and pouted for a little bit, and when I came back decided the only thing I could think of to change now before re-installing WMDC altogether was to roll back the driver for the mobile devices (in device manager) and WA-LA! Pouting works! I am now able to sync and Klaus (the i-mate) plays nice with Bob (PC)... ah, household bliss!
Thanks!

i still cannot get my laptop to see the artemis when it is bootloader mode - i have the XP driver on!!!!

I would love to try it, but does anybody have a german manual, or a translation program that translates Windows English into Windows German?

unable to update hx4700 2003 - MW6 using Bootloader!

I've read good reviews on chrismrulz's bootlaoder programe and I'm trying to use it to update my iPAQ 4700 from 2003 to WM6. However I am obviously doing something wrong as I just cannot get it to work!
Please can anyone offer any advice?
I hope I am following the exact instructions as mentioned here at http://forum.xda-developers.com/showthread.php?t=325727
and here is what is happening:
Step 1.
Make new folder in root directory.
No Problem c:\Bootloader set up.
Step 2.
Download WM6 ROM and bootloader into file.
Done as directed from links in instructions directly into new folder.
Checked and c:\Bootloader now has 2 files in it Bootloader.exe and WM6_4700_0_7_0_RELEASE4.rar
Step 3.
Put hx4700 in bootloader mode and place in sync cradle.
I assume I have done this correctly. Screen goes blank and you can just make out the HP logo it says USB when in cradle and shows version 1.01
Step 4.
Open bootloader and select image.
Ok I go to folder and double click on Bootloader.exe
I get a security warning about the software and ignor by pressing run.
2 things now happen simutaniously. Bootloader.exe expands and creates c:\Bootloader\Bootloader and fills it with more files and directories and....
I get a box asking me to select a file to flash ROM to my device. I change the directory back to C:\Bootloader and select WM6_4700_0_7_0_RELEASE4.rar and press open.
I get a message telling me to please wait the file is being extracted and inviting me to press ok. Before I can press ok the box is replaced with a winRAR Diagonistic Message saying c:\Bootloader\WM6_4700_0_7_0_RELEASE4.rar no files to extract.
I close this dialog box and get another message telling me to wait whilst it edits files. Then this in turn is replaced by a message saying Error reading file c:\Bootloader\Bootloader\temp_nbf\ I click on OK to acknowledge.
And that’s it nothing else happens.
I've obviously read the instructions wrong or something can anyone help point me in the right direction? Or offer any alternatives?
I'm using Active Sync 3.7.1
Thanks
Phil

Open the rar file (with WinRar), and read the instructions that are in the Readme.txt file... And update your Activesync to version 4.5, which is needed for WM6.

Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?

Phil3099 said:
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Click to expand...
Click to collapse
Very strange indeed, my AS works fine with OL2002... Did you use the MS Office Update to get the latest servicepacks for OL ?
Dirk

Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy

Phil3099 said:
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Click to expand...
Click to collapse
Try these .....
First install JBed, then Opera
Cheers
Dirk

Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil

After extracting using WinRAR

Trying to upgrade from 2003 to WM6 ...
After extracting WM6_4700_0_7_0_RELEASE4.rar using WinRAR I am trying to follow the instructions in the readme.txt (as Bootloader didn't work for me as in the first post in this thread):
From readme.txt
To begin with if you want to flash your device using cradle,you have to:
1.In processes (CTRL+ALT+DEL) you must kill Wcesscom.exe
2.Then Enter in Bootloader (Contacts+iTask+Reset)
3.Put your device on usb cradle.
4.Run mtty11a.exe
5.In "Port" choose \\.\WCEUSBSH001 and click OK
6.Write command: lnb OS_WM6.nb0
7.Wait
8.Enjoy yourself
As I'm not all that familiar with this can someone explain in step-by-step what's involved with the mtty11a.exe application, and Step 6?
Currently my hx4700 is what I think in bootloader mode (Screen is dim an I can barely make out "USB" the hp logo and the current version "v1.01"). I previously tried the original WM5 upgrade and it just dies on me at 0.1%.

Hi tk2000
As I posted the original post I know exactly what you are going through. However once I went through the instructions you are currently trying to use every thing went smoothly. You have extracted the .rar file and are unsure of the mtty11a.exe file.
Assuming you have you have killed Wcesscom.exe on your pc as in step 1,
and the device in in its cradle in bootloader mode (as you described very faint HP logo, USB and version 1.01 displayed).
Then double click on the mtty11a.exe as in step 4. This then brings up an application and you will see a dropdown menu next to port, simply select the option \\.\WCEUSBSH001 and click ok.
6.Write command: lnb OS_WM6.nb0 now this stage I was a little unsure of myself I simply typed "lnb OS_WM6.nb0" in from the keyboard and pressed enter and it started to load. This takes a few minutes but afterwards you should have WM6 on your device.
I had to do a couple of hardware restarts and it took a few minutes in its cradle but it all works fine for me.

Phil3099 said:
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
Click to expand...
Click to collapse
Hi Phil,
There should be an 'opera-unsigned*.cab' somewhere here on the forum. I didn't try it because Opera works fine for me.
Sorry
Dirk

Phil3099, I a followed the instructions exactly but I don't see a status bar on the pda. mtty showes the progress with lines of + but the 4700 stays on the hp logo screen with USB on top.

SYNC trouble???? HERE"S THE FIX!!!!

Everyone's having problems lately with the new Roms and sync w/ Vista. I've used this on my last 5 Roms and it has worked every time.for WMDC (vista activesync) to work go into the device ID and name the phone "Pocket_PC" exactly how I typed it........no qoutes. ....oh and BTW make sure your Schaps Config also names the Device Pocket_PC
Let me know if it works for you
UPDATE!!!
ADDED: remove the advanced config program from your phone that works also!!

Any luck anyone?

mossburg44 said:
40+ views and nobody is saying whether is works or not, thanks
Click to expand...
Click to collapse
I don't have anything running vista, but it's something nice to put in the memory banks just in case I ever run across the problem.
Maybe someone will give it a whirl.
Thanks for the tip!

Don't have a Vista box here @ work, but will try it later tonight. I wasn't having as much as an issue with it as some people. Sometimes I would have to kill mobsync and restart it for it to work.... I'll give this a try and see

Haven't had any problems synching with my Vista 32bit but if I do I'll try this..thanks

No Problem with Vista64 SP1
I have my 8525s named as such and have not had a problem synching or flashing with either my Vista64 SP1 desktop nor my Vista32 SP1 notebook. Thanks for your post, however!

This is weird because i have been having this issue lately too. Also my father with the same phone and different computer is having the same issue.
Seems to happen when im switching roms. FYI iv tested many Minella2d roms.

questions from a noob
I just got this phone, and my only other ventures into ROM changing was a Motorola ROKR E6 seems similar but I am trying to figure all of this out without a users manual, software disc, just by reading and trying to download.
My questions are how do I change the name of my phone. When I power on it says that it is pocketpc I already went to microsoft and downloaded the info for viista wdmc but I don't think that the computer recognizes the phone other than the auto play feature.
THanks

Tried your fix and, I am afraid, it didn't work for me. My Hermes still fails to sync after the intial setup.

not yet
I only changed the setting in the Shaps advanced settings under Friendly Name... and it still doesn't work... what is the other place you have to change it? thanks!

followed all steps u said and still no luck
not connecting to my PC is killing me

diegolaz said:
I only changed the setting in the Shaps advanced settings under Friendly Name... and it still doesn't work... what is the other place you have to change it? thanks!
Click to expand...
Click to collapse
Go to Settings-> system -> about -> Device ID
also make sure that you delete any previous sync info from your computer

mossburg44 said:
Go to Settings-> system -> about -> Device ID
also make sure that you delete any previous sync info from your computer
Click to expand...
Click to collapse
it worked perfect! first sync in weeks!!

mossburg44 said:
Go to Settings-> system -> about -> Device ID
also make sure that you delete any previous sync info from your computer
Click to expand...
Click to collapse
changed device ID and friendly name but how exactly would i delete previous synce info from my computer?

stixnstownes said:
changed device ID and friendly name but how exactly would i delete previous synce info from my computer?
Click to expand...
Click to collapse
after you are able to sync again,the activesync green and yellow icon will pop up on your task bar just open it and delete the old partnership.

mossburg44 said:
after you are able to sync again,the activesync green and yellow icon will pop up on your task bar just open it and delete the old partnership.
Click to expand...
Click to collapse
I connected (which i only get to do once and then i have to uninstall device and install again)
WMDC opened but i dont see what you are talking about where i can delete my old partnership
this is what im seeing on my screen
http://i77.photobucket.com/albums/j53/stixnstownes/Untitled.png

if your phone is connected your good to go another way you can go to activesync is in Control Panel -> Network and Internet -> Sync Ceter

I am not sure if I should post here or under Schaps' rom thread. I have Schaps 4.31 rom. For 4 days now my 8525 stopped syncing with the computer, but in the same time my contacts and my events/calendar on the phone disappeared. I reinstalled the rom again, I reinstalled the Windows Mobile 6.1, with no effetcs. When the computer odes the first sync and set-up it says that I don't have the outlook installed. I have it on the computer, and on the PDA I have the office. So I am kind of stucked. I tried the Pocket_PC ideea, but the only thing now is that the Windows Mobile Center stops working in the middle of syncing, and ... no results.
Thanks for help
Adriciu

mossburg44 said:
if your phone is connected your good to go another way you can go to activesync is in Control Panel -> Network and Internet -> Sync Ceter
Click to expand...
Click to collapse
it connected once and only once. After that i have to uninstall the device in device manager, unplug the phone, soft reset the phone, plug it in, and let it reinstall the driver. this happens every single time i need to connect to my PC.
VERY frustrating

Vista and sync issues
I have two 8525 phones - under Vista, one would sync, one would not. I kept getting the RNDIS error and unrecognized device. I connected the one that was good, and went to the device manager to get details about the drivers used.
I connected to one that did not connect, and got to the point where I could specify the driver location, pointing it to C:\Windows\WindowsMobile worked for me.

How install .NET 3.5 on the HD?

Apologies if this has been covered elsewhere, but a forum search revealed nothing...
How do I install .NET 3.5 on my Touch HD?
I have installed Advanced Congif , and it tells me i need to install .NET in order for it to work.
I downloaded the .net redistributable file from the MS website (filename is NETCFSetupv35.msi), but when I try to run it on my HD as I would with a .cab file, it tells me there's no associated program to run it.
I guess it has to be installed some other way (through ActiveSync maybe?), but I don't know.
Any helpful soul out there care to put me out of my misery?
Cheers in advance
Pete

Yes it has to be done through Activesync.

run it on your pc, and it will install on your device (or next time you connect if you're not connected when you run it)

It says on the microsoft download page...:
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
and
Instructions
Click the Download button on this page to start the download, or choose a different language from the drop-down list and click Change.
Do one of the following:
To start the installation immediately, click Open or Run this program from its current location.
To copy the download to your computer for installation at a later time, click Save or Save this program to disk.
...

Use a CAB
myearwood173 said:
Yes it has to be done through Activesync.
Click to expand...
Click to collapse
I did not use ActiveSync to install it. I can't remember where I found it, but it has some kind of "Microsofts digital signature", so I think it's the right one...
Link:
http://www.fileden.com/files/2008/7/1/1983933/Microsoft_.NET_CF_3.5.CAB

Thanks!
Thanks guys,
sorted, using the .cab (couldn't work out how to do it with Activesync).

Can't install :-(
Nooo! I have a problem...
I had some trouble with .NET CF 3.5, and then I wanted to reinstall it, but when I uninstalled it, and then tried to install it again, it didn't work.
It doesn't work through ActiveSync AND the cab. Do anyone know whats wrong here, or do I need to start a new thread?

Is your ActiveSyns up to date? And did you download the file from the mircosoftsite? I reïnstalled the file yesterday..

hanjoster said:
Is your ActiveSyns up to date? And did you download the file from the mircosoftsite? I reïnstalled the file yesterday..
Click to expand...
Click to collapse
My ActiveSync is okay, and the cab is from the microsoft site...
EDIT:I think something is wrong with my phone, but I don't want to do a Hard reset.

Installed no problem if you use your PC to get the CAB just pop in onto the memory card, bung it in your phone and using file explorer locate file and install onto your device. Easeeee
Even easier would be to use PIE and visit this site/thread and follow the link to download directly onto phone then do above in File Explorer
http://www.fileden.com/files/2008/7/...NET_CF_3.5.CAB
Thanks clb92

clb92 said:
I did not use ActiveSync to install it. I can't remember where I found it, but it has some kind of "Microsofts digital signature", so I think it's the right one...
Click to expand...
Click to collapse
Thank you! Worked like a charm!

.NET 3.5 cab
bro,
.NET 3.5 is available as cab for direct installation on to your phone. Copy in to your phone / storage card and install in phone memory. I have installed on my HD stock rom and works fine. Here it is .... hope this will help, this is my first response to a mail and hope what i do is right. thanks Dr Shaheed

WIFI UH OH (driver is not loaded)

I was updating my freinds dash, he had official rom on it, i went to rose rom v1.7a and also kavana final and some others and then i went back to latest t-mobile official rom 1.16 something, and all of them now say "drivers is not loaded" when you go to look at the wifi status, I loaded the WM2005 SDIO wifi drivers cab and also got a fresh copy of wifiinit.exe in the windows folder and then put the shortcut to it in the startup folder....i now have it running the rose v1.7a, i am lost, i'm on the phone now with a clueless pda expert at t-mobile.

still no solution to this problem, my friend might have to reflash back to original and do warranty exchange...i don't know what went wrong...he needs a new phone anyways...or maybe get the updated dash

wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that

Bupahs said:
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Click to expand...
Click to collapse
They are in there, the wifiinit.ink is in startup and the wifiinit.exe is in the windows folder, still no luck...reflashed to original rom (even that didn't work), i'm hoping there is a cab that can reload the driver...but only found SDIO wifi driver cab..those don't work....

pychobj2001 said:
They are in there, the wifiinit.ink is in startup and the wifiinit.exe is in the windows folder, still no luck...reflashed to original rom (even that didn't work), i'm hoping there is a cab that can reload the driver...but only found SDIO wifi driver cab..those don't work....
Click to expand...
Click to collapse
The drivers are included in every ROM I have ever flashed, loading them comes from the .lnk file. So unless you are getting an error that the drivers do not exist or have failed they are their. It is possible your .lnk file is pointing to the wrong location

Bupahs said:
The drivers are included in every ROM I have ever flashed, loading them comes from the .lnk file. So unless you are getting an error that the drivers do not exist or have failed they are their. It is possible your .lnk file is pointing to the wrong location
Click to expand...
Click to collapse
no, becuase i deleted the .ink, copied the .exe from the windows dir and pasted a shortcut of it in the startup folder.....i don't have the dash now..my friend does...I think he should go to the g1, or just grab a 1yr replacement one, but he doesn't want a refurb which is ussaully what they give u

pychobj2001 said:
no, becuase i deleted the .ink, copied the .exe from the windows dir and pasted a shortcut of it in the startup folder.....i don't have the dash now..my friend does...I think he should go to the g1, or just grab a 1yr replacement one, but he doesn't want a refurb which is ussaully what they give u
Click to expand...
Click to collapse
why would you move the exe? How did you make a shortcut if you moved the exe? The G1 sux (sorry to those that think otherwise but it does). You only get a refurb if you dont ask for a new replacement. I always get new, after all I bought a new device not a refurb didnt I?
Anyway, it sounds like you created a bad shortcut for wifi and thats your issue

the .ink file is mising in my startup folder. What should i do? the .exe is still there

nikmash232 said:
the .ink file is mising in my startup folder. What should i do? the .exe is still there
Click to expand...
Click to collapse
Make a new link file, use total commander to do it or if you need I can upload one for you

pychobj2001 said:
I was updating my freinds dash, he had official rom on it, i went to rose rom v1.7a and also kavana final and some others and then i went back to latest t-mobile official rom 1.16 something, and all of them now say "drivers is not loaded" when you go to look at the wifi status, I loaded the WM2005 SDIO wifi drivers cab and also got a fresh copy of wifiinit.exe in the windows folder and then put the shortcut to it in the startup folder....i now have it running the rose v1.7a, i am lost, i'm on the phone now with a clueless pda expert at t-mobile.
Click to expand...
Click to collapse
I have the same problem, the WIFIinit.lnk is in the startup folder, and WIFI is not working. Any help?

majedaly said:
I have the same problem, the WIFIinit.lnk is in the startup folder, and WIFI is not working. Any help?
Click to expand...
Click to collapse
Strange, the problem was due to a defective battery! Seems that when I try to switch on WIFI and SD, the battery level goes down in a way that the OS does not load the drivers. Charged the battery to 100%, and rebooted, everything works normally.

if you have a drivers problem, should try with this...i had the same in my dash...."drivers not loaded"...i put this files on the phone and wifi works again.

Please help
I just got my dash. I upgraded it to the kavanna but then i wanted to give the vanilla version a try since i needed a cleaner version it had a picture of the tmobile shadow but i thought it would be ok since the folder tittle said excalibur. It gave me and error at 3 % saying that the iimage was the incorrect size. Then it started up with kavanna but there was no wifi option. Then i downgraded to wm6 standard but my wifi wont start. When i check the settings it tells me that the driver is not loaded. Ive been looking around in this forum for 2 days. All i see is people saying that this topic has been covered already. I tried the wininit.ink and exe thing and no success. I hard reseted and nothing. I tried different roms and the official tmobile but nothing seems to work. Is there a way to start from scratch???i just want to stick with the official tmobile rom. Please help meee.
Im running vista ultimate
the official tmobile rom latest version

wifi driver not loaded on my htc dash
Hello, I am stuck with this issue. I tried several roms and uspl but nothing happens. I installed 6.0, 6.1 and 6.5 rom versions, no wifi.
I really need help on this since I use this phone to get connected.
Please you can write me so I can see what I have to do to fix this wifi problem.
[email protected]
thanks!

my friend has this same problem it was an easy fix he wasnt running the batch file, are you sure your flashing right?

Bupahs,
Can you please help. I have read this several time and still no luck with WiFi driver. Mine still says driver not loaded. I am new and jus can not figure it out. I have flashed Ookba's 6.5 several time along with the patch.
Thanks

HEEy the same for me, pleas help us!

and microWlan doesn't work in any Roms i tested...

Bupahs said:
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Click to expand...
Click to collapse
yes this worked! thank you. i accidentally deleted it when trying to increase startup times. putting this file back in the startup folder got my wifi up and running again. tnx again.