Hello everybody,
does anyone know how to extend the frequency range of the FM Radio?
Down to 84 Mhz and up to 175Mhz would be perfekt .
Regards.
I do not think it is possible ...
PavelR.
it must be possible because the fm range in japan is from 76 mhz - 90 mhz. so it must be possible to go down to 85 mhz or so with a reg hack. can somebody how owns this ppc look into the reg if he finds an possible value or import the reg an load it up?
That would be great, if someone could find a solution
... wish you good luck
PavelR.
FMRadio hack
Hi,
HKLM\SOFTWARE\HTC\FMRadio\FMPlayer\Band
0 = 87.5 - 108.0 MHz
1 = 64.5 - 97.5 MHz (11.5 MHz displayoffset !!! 76.0MHz(displayed) = 64.5MHz (Radiofrequency) )
2 = 76.0 - 91.0 MHz
175 MHz is'nt possible, but you can set frequency direct in
HKLM\SOFTWARE\HTC\FMRadio\FMPlayer\Channel
Value = MHz * 10 (=> 1100 = 110.0 MHz !)
Regards.
P.S. Sorry for my poor english.
... that is really nice. It works. Sorry for being so sceptic
PavelR.
mhmm but when i change the band, i have problems with the volume.
it is necessary to change volume after channel search to hear anything.
someone same probs?
Hi,
sorry, little error in my first post
new for Band = 1:
HKLM\SOFTWARE\HTC\FMRadio\FMPlayer\Band
1 = 64.5 - 97.5 MHz (11.5 MHz displayoffset !!! 76.0MHz(displayed) = 64.5MHz (true Radiofrequency) )
is it possible to enter 85.255 or 86.375 mhz an listen to them?
Thanks for that great info.
Still on this subject, is it possible to set the range to the aeronautical frequency (118MHz-136MHz)?
Do I have to set each frequecy 'by hand' in the HKLM\SOFTWARE\HTC\FMRadio\FMPlayer\Channel or is there a number that will give me that range in HKLM\SOFTWARE\HTC\FMRadio\FMPlayer\Band?
regards,
cfvilela said:
Thanks for that great info.
Still on this subject, is it possible to set the range to the aeronautical frequency (118MHz-136MHz)?
Do I have to set each frequecy 'by hand' in the HKLM\SOFTWARE\HTC\FMRadio\FMPlayer\Channel or is there a number that will give me that range in HKLM\SOFTWARE\HTC\FMRadio\FMPlayer\Band?
regards,
Click to expand...
Click to collapse
UP
I'm interested in that too...any solution ??
regards,
Mike.
Maybe an extended fm radio cab for dummies like me would be of use?
Any idea how to tune 127,15 Mhz ?? (2 numbers after the decimal)
A slight problem with air freqs: they are AM and the program is called "FM Radio"
Maybe a 'tweak' can enable AM too ?
FM radio app sucks
I have the same problem as MrButcher. I don't know how it happens but after a while my radio stops functioning correctly.. If I switch channels, the sounds mutes. When I change my volume the sound comes back..
When I give my phone a hard-reset the problem disappears, to come back after a view days.
Anybody?
Dear all,
Could somebody let me know how to change the setting in the registry with Total Commander. I guess I´m to stupid to do this. May be it´s possible to give an information for newbies how to do this.
br
Ingo
Hello ingok,
better yousing software like regedit. Then you could following step for step written in the postings.
Have a nice day
rescue01 said:
Hello ingok,
better yousing software like regedit. Then you could following step for step written in the postings.
Have a nice day
Click to expand...
Click to collapse
Hi rescue,
ok, I will give it a try. Thanks for help.
Ingo
sebi112 said:
is it possible to enter 85.255 or 86.375 mhz an listen to them?
Click to expand...
Click to collapse
any news to this?
2 or 3 numbers after the decimal would be nice!
how is this possible?
Related
Hello
I tried to change the frequency from the FMRadio as u describe it in the wiki.
Change Radio scan range on FM
"HKLM\SOFTWARE\HTC\FMRadio\FMPlayer\Band"
0 = 87.5 - 108.0 MHz
1 = 76.0 - 108.0 MHz
2 = 76.0 - 91.0 MHz
but in my registry isnt the FMRadio\FMPlayer\Band key available i have HTC but no FM........
i used already the search function in the REGISTRY but couldnt find it. I have an XDA Orbit WM6 O2.
Do i have to create them???
thx a lot
Resco Registry explorer
Hello
Cant somebody help me???? It is defenitly not in there. It is an original O2 Orbit with WM6 from the O2 page.
After Hard Reset still cant find it
Hi again
So i made a Hard Reset but the key isnt there. Who can help me
Hi ppl
i'm very new in artemis and ppc. recently i've acguire this artemis and came across this great forum where i've already learned lot's of stuff, but now i put a question:
two days ago i've formated the artemis and since then configuring the accuweather for any city in my country (portugal) will give values of temperature to high, before i've formatted it was ok.
Any body news why)
i kind of like this feature
thank you all
What is the purpose of already knowing the temperature and then saying acuweather is wrong?
But I think you have to complain to acuweather.com. I don't think it has anything to do with your new ROM
Still looking...
satrich said:
What is the purpose of already knowing the temperature and then saying acuweather is wrong?
But I think you have to complain to acuweather.com. I don't think it has anything to do with your new ROM
Click to expand...
Click to collapse
hello my friend (if i may call you that)....
the purpose is not to have to go the web page i find out...
if the values come from the same place it has no razon to be so diferent (the web site gives 12º and the ppc gives 48º.
of course that in the ppc it searches for values automatic...
could it be something installed previously? like what?
thank you...
Formula for degrees Celcius to Fahrenheit:
F = C × 1.8 + 32
That is pretty much the difference 12 to 48.
So I think your regional settings are set to show degrees Fahrenheit instead of Celcius.
Hope this helpes.
hello
satrich said:
Formula for degrees Celcius to Fahrenheit:
F = C × 1.8 + 32
That is pretty much the difference 12 to 48.
So I think your regional settings are set to show degrees Fahrenheit instead of Celcius.
Hope this helpes.
Click to expand...
Click to collapse
yes my friend, your're right
thank you a lot for your help
my head was burning out
again thank you a lot
hi guys,
my tp2 keyboard is slow... when i write a sms it complile the text too slower than i type...
in my old Tytn2 (kaiser) i find that: http://forum.xda-developers.com/showthread.php?t=436795: i try change the registry in my tp2... but no news...!
so, no ideas?
ps: please can you help me: what is your registry value?
HKEY_CURRENT_USER\ControlPanel\Keybd
"InitialDelay"=dword: dec 775
"RepeatRate"=dword: dec 23
this is mine... i've lost original values...
thanks a lot!
default values:
Initial Delay = 250
Repeat Rate = 30
maybe your problem is Rom issue, some Roms are too slow on our devices.
Good Day.
Would it be possible to change the standard radio frequency range from 87.5 - 108 MHz for example to 85 - 110 MHz?
Some region firmware (asia or usa) of the samsung wave is using a different frequency range.
Don't think so
the Fm radio app isn't visible in usual cases after extracting Shpapp file
maybe it is stored at apps_compessed.bin which no one dares to touch
or maybe in Amss.bin which is a weak Probability as it seams to be the file holding things for Qualcom communication processor
User xsYCOx (Custom Firmware) will keep an eye on it
Any news about this?
Think the fm radio app is in apps_compressed.bin.
Ive tried to decrypt the file with wave remaker and searched for hints like "fm" "radio" and "mhz".
There are lots of hits but I dont know how to change the frequency range for fm radio ...
Some region firmware (asia or usa) of the samsung wave is using a different frequency range.
Click to expand...
Click to collapse
Maybe meanwhile you have identified these Firmwareversions?
Please tell us and maybe Link for Download...
"Compare 2 files" is easier...
Best Regards
adfree said:
Please tell us and maybe Link for Download...
Click to expand...
Click to collapse
Try to download.This is the latest Usa bada 1.0 version release.BVIJJ3
http://www.sharebees.com/7u0gu721tx7w.html
P.S if link doesn't work please tell me.Just i'm on a mobile
Need more details...
Maybe Screenshot exists...
I have not much time to do this... for search via Google.
Best Regards
change Keyboard Responsivness when Typing
HKCU\ControlPanel\Keybd Change InitialDelay from 144 to eg.100, or any value higher or lower
What exactly does this do? Because I played around with a lot of settings and didn't notice any change. BTW this is a DWORD value and if you choose to play with it REMEMBER the initial value. (375 Dword = 177 for Surround Owners)
Laquox said:
What exactly does this do? Because I played around with a lot of settings and didn't notice any change. BTW this is a DWORD value and if you choose to play with it REMEMBER the initial value. (375 Dword = 177 for Surround Owners)
Click to expand...
Click to collapse
if did not notice any change means the values are defaulting back to original. u need a rom and registry editor that works
i know mine works because ei see changes...one way to find out if anything is working is to disable gpu renderer for internet explorer . u will notice emails with rich text will not show up. then cange the value back again
my hd 7 says 144 value as default. i noticed the keypad in samsung phones are smoother,
so a good value for htc phones as i just tried is 200
HI
There is already a thread for registry tweak!!
why you create new thread for just one key......
http://forum.xda-developers.com/forumdisplay.php?f=606
read the bottom of post!
"this thread will be updated as soon as we have identify or found new entries.
Please submit any Registry Tweak you have and I will update the 1st post.
thanks
"
Magpir said:
u need a rom and registry editor that works
Click to expand...
Click to collapse
I am running DFT v4 and my registry editor works and value stays at what I set after a reboot, but can't really tell any difference. Perhaps just me.
I think Xboxmod was attempting to link to This thread which has a lot of registry tweaks. =D
Perhaps someone will have use of this though. Grats on finding the entry
Another BAttery Increase
HKLM\Drivers\BuiltIn\Battery\
Set "PollInterval" to 20000 from watever value is there.
Magpir said:
Another BAttery Increase
Click to expand...
Click to collapse
Looks like you just had discovered msdn site for yourself. That's good. But only that! All posted by you registry "tweaks" (here and in another thread) are well known since .... hmmm... Pocket PC 2002 (codename Merlin) - released at the end of 2001....
What kind of increase? You don't increase or decrease anything by changing this!!!
This digits only change the poll interval!!! That means - you only change how often does the power controller check the battery voltage level!
The meaning is in milliseconds.
The regisrty has a lot of different values and keys. Are you going to start separate thread for each of them?
Stop opening useless threads!