Related
hi i have xda1 with t-mobile
it only shows t-mobile and hangs there
it shows
t-mobile
4.01.19
which rom should i use and what is the method to write that rom
Thanx in advance
Normally you should see ROM Version (in you case 4.01.19) and also 2 other Version. But I´m sure, you do not see this numbers....
I think you have flashed the wrong radiostack to your device and now you have GSM Error when you enter the bootloader....
Try this instructions:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
any thing else
i ve downloaded the same rom version on my phone but still it hangs at the startup with showing
3.17.03
with no radio versions and etc.
The phone was fell down from me and it started the problem from same time.
plz give me solution it is very urgent
You may have damaged some internal component when you dropped the phone. Are you pushing resetting the phone after flashing, by pushing once in the hole under the headset socket then wait one minute and push once more.
You are saying that you have ROM version 4.01.19
If I remember correctly that ROM version can only be unlocked using the SD card method. Is it possible that somebody tried to unlock it and screwed it up?
Either way it sounds like you need a new main board for it.
my phone is finally ok with some problems
i ve successfully made my mobile in working condition by some technical methods but i still have some problems with its software. from where i can get the exact radio stack for being used here in Pakistan. is it wants auto configuration but my operator and country is not listed in that menu.
3.17.03 ENG
6.24.00
324e4
which radio stack i must install and from where i can get it?
Thanks in advance to all members
hi
if someone want to know how i successfuly repaired it u can ask me
RE: my phone is finally ok with some problems
I just shipped an SX56 to a customer in Karachi, Pakistan and he is apparently happy with it.
It was upgraded with this file: sx56_WM2003_update.exe
G1.3.3
RA.33.02
A.30.09
RE: my phone is finally ok with some problems
Forgot to mention it, that file also upgrade the radio stack.
What abt my regional settings
Thanx but cud u plz tell me how can i get logon with my sim card coz my phone is not giving signals ? it wants some kind of customization process but my country's network is not listed in it
Thankx
After trying to upgrade radio stack to version 4.24.20
i just tried to upgrade my radio stack to above mentioned version. Now i m gettin an error message that says "cant upgrade rsu prss ok to restart" it comes again and again. rsu upgrading was done first time with no errors but soon after it,it start giving me that message and in the startup screen it shows the previous version of radio stack which was 6.24.00. Plz tell me what is wrong that i did and how to resolve that trouble?
Thanks
I own a universal o2 xda exec purchased from uk. It has been working greatly for about 8 month (on another SIM provider) without any troubles.
Suddenly it receives no signal, the phone doesn't seem to see the SIM, I can't enen access the phone settings.
After performing a soft reset I checked the device information and found that radio version & protocol version are BLANCK noyhing is written, also the IMEI number doesn't exist, nothing is written.
I tried to install a new ROM but it didn't work, I got an error message about my ROM image that is not compatible with my country code!!!!!!
I've been advised to reinstall the WM5????
Please advise.
elsaghirmo said:
I own a universal o2 xda exec purchased from uk. It has been working greatly for about 8 month (on another SIM provider) without any troubles.
Suddenly it receives no signal, the phone doesn't seem to see the SIM, I can't enen access the phone settings.
After performing a soft reset I checked the device information and found that radio version & protocol version are BLANCK noyhing is written, also the IMEI number doesn't exist, nothing is written.
I tried to install a new ROM but it didn't work, I got an error message about my ROM image that is not compatible with my country code!!!!!!
I've been advised to reinstall the WM5????
Please advise.
Click to expand...
Click to collapse
You can download this ROM of Jwright. This is the latest available version of WM6. The link here uses a version which does not give a country code error. I suggest you go through this forum to understand the issues involved in upgrading. Everthing has been covered in detail.
HTC UNIVERSAL Version 2.01.08 WWE Download:
(Uses MaUpgrade_noID)
http://micmeo.com/UNI/WM6/HTC_UNVERS...0_wwe_ship.zip
thanx a lot.
I'm now downloading it. But isn't it strange for the device not to show it's IMEI number in the device information?
Is there any other way to show the IMEI just to make sure that it;s identifyied for the device?
elsaghirmo said:
thanx a lot.
I'm now downloading it. But isn't it strange for the device not to show it's IMEI number in the device information?
Is there any other way to show the IMEI just to make sure that it;s identifyied for the device?
Click to expand...
Click to collapse
to get the IMEI code you can also dial *#06# and press the talk button. But it is surprising that this information is not shown on your device info. This info is usually available in the 'Identity' tab in the device info menu.
somebody mentioned something about a problem with the radio stack. I tryed to install a No_ID rom and the system stopped at the radio stack update step.
So is it a hardware that has to be changed or exactly what?
and what has the radio stack to do with the IMEI no not appearing.
Also i tried to dial *#060# but get nothing only an attempt to call & a waiting message!
Sorry for disturbance but I 'm seeking any help
elsaghirmo said:
somebody mentioned something about a problem with the radio stack. I tryed to install a No_ID rom and the system stopped at the radio stack update step.
So is it a hardware that has to be changed or exactly what?
and what has the radio stack to do with the IMEI no not appearing.
Also i tried to dial *#060# but get nothing only an attempt to call & a waiting message!
Sorry for disturbance but I 'm seeking any help
Click to expand...
Click to collapse
this is the correct code to check *#06# and press talk
I have a wildfire s that has been properly unlocked, however it will not accept my o2 sim- i dont mean that I can't get the mms or internet but it wont accept the actual sim - when it ask me to choose a network and i pick o2, it simply says that the sim does not support connection the the carrier - i have a brand new sim 3g ready.....................someone, please help...
imnw said:
I have a wildfire s that has been properly unlocked, however it will not accept my o2 sim- i dont mean that I can't get the mms or internet but it wont accept the actual sim - when it ask me to choose a network and i pick o2, it simply says that the sim does not support connection the the carrier - i have a brand new sim 3g ready.....................someone, please help...
Click to expand...
Click to collapse
what does 'properly unlocked' mean ?
I say you might have unlocked the bootloader,bit the phone still has SIM lock.
Sent from my HTC Wildfire S
hmm, so you saying if i go back to the shop and get them to unlock properly, it might let me use the o2 sim???
is there anything i can do....having only a modest knowledge of these issues?
and in reply to properly...sorry i wasnt specific - i meant that when you put an o2 sim in and turn it on...it doesnt ask for a pin or code to unlock the phone??
Well did you buy it in a O2 shop? If yes,then there appears to be a problem with you handset. If you DIDN'T buy it in a O2 shop(which means any other,T-Mobile,3,etc.) Then you're out of luck because it it probably SIM locked to that carrier.
You should bring back the handset back to the shop and ask them to remove the SIM lock.
ok, so here we go...
Went to the shop and they say the phone is unlocked. When i put an o2 sim card in, it does not require a pin when the phone switches on.
It works with tmobile sim, orange, virgin just not o2....
so it is unlocked just wont take o2.....
any ideas why?
its originally a tmobile wildfire - spoken to tmobile and they say they have completly unlocked.....
imnw said:
ok, so here we go...
Went to the shop and they say the phone is unlocked. When i put an o2 sim card in, it does not require a pin when the phone switches on.
It works with tmobile sim, orange, virgin just not o2....
so it is unlocked just wont take o2.....
any ideas why?
its originally a tmobile wildfire - spoken to tmobile and they say they have completly unlocked.....
Click to expand...
Click to collapse
do you have any other o2 sim to test it ?
you should also go and change your sim, might be rly the SIM problem ...here changing sim costs 10 bucks, i hope its free in your case.
im afraid im a step ahead - all o2 sims dont work - i had a brand new 3g sim sent out by o2 and have tried a pay as you go sim on o2 - still wont work with any o2 sim....
any ideas?
imnw said:
im afraid im a step ahead - all o2 sims dont work - i had a brand new 3g sim sent out by o2 and have tried a pay as you go sim on o2 - still wont work with any o2 sim....
any ideas?
Click to expand...
Click to collapse
a ok, i didnt read that one... lets try to keep this on one thread. why dont you try flashing stock rom again... i mean its worth a shot... i guess you dont use any custom roms atm ? or even try flashin any custom rom, just to try it ... if it doesn't work then, well, we will see it's a very strange problem.
did you try connecting with 2g, and not 3g...
or maybe changing setting in *#*#3646#*#* then phone information, then set preffered network type... and try changing those also ... First try this, and if it doesnt help then try what i wrote above.
ok,well - had a read of your suggestion and only a slight problem with it...i am a real beginner when it comes to this so apologies but rom flash???
Also looked at the *#*# suggestion...unsure how to do that - did try typing that into the keypad on the phone part but it didn't do anything..
apologies im not up to speed..any way to simplify for me?
oh, and also someone has suggested going into the bootloader so i took out the sim and battery, put it all back in and held down volume and power. at the bootloader menu, i selected simlock. when i pressed it the following was displayed..
fat 32 init ok
open mccmnc file fail
open cid file fail
process done, reboot?
does this help explain anything??
imnw said:
oh, and also someone has suggested going into the bootloader so i took out the sim and battery, put it all back in and held down volume and power. at the bootloader menu, i selected simlock. when i pressed it the following was displayed..
fat 32 init ok
open mccmnc file fail
open cid file fail
process done, reboot?
does this help explain anything??
Click to expand...
Click to collapse
i guess you didnt unlock via xtc clip... you should write the code that i told u on dialer pad, it should immediately open a meny, i will make photos when i come home as a more detailed guide k ?
ok, just to save you some time if you dont need to spend it - the phone was unlocked at a local shop - no idea how they did it - although im guessing badly...
i typed that code in - when i enter the final * the code just disappears and it does nothing. I did enter the code without the last * and it said mmi running but then said incorrect mmi...
imnw said:
ok, just to save you some time if you dont need to spend it - the phone was unlocked at a local shop - no idea how they did it - although im guessing badly...
i typed that code in - when i enter the final * the code just disappears and it does nothing. I did enter the code without the last * and it said mmi running but then said incorrect mmi...
Click to expand...
Click to collapse
oomg man i just saw, its my bad ITS NOT 3646 its 4636 .... i wrote it wrong :////
thanks - tried that and got into the phone menu. The current preferred choice is WCDMA - there are other options but nothing to suggest that an o2 sim should be blocked....
imnw said:
thanks - tried that and got into the phone menu. The current preferred choice is WCDMA - there are other options but nothing to suggest that an o2 sim should be blocked....
Click to expand...
Click to collapse
well ntry changing to gsm preffered and so on, just try it ...
ok dok - given it a go and no luck - im wondering if a factory reset of the phone may restore the original settings and I can get it unlocked the correct way this time??? what do you think??
imnw said:
ok dok - given it a go and no luck - im wondering if a factory reset of the phone may restore the original settings and I can get it unlocked the correct way this time??? what do you think??
Click to expand...
Click to collapse
well, you should give it a go, since i dont have an idea what could possibly be wrong
ok, well have done several things.
i) master factory reset - made no difference - o2 sim still wont work
ii) tried to connect the phone to the pc but even with htc sync installed the phone wont connect to the pc
so it looks like we're stuffed here???
My Htc tp2 is security unlocked.I had Mightyrom on it forever so i figured why not try a new rom.I did not like the android thing so i removed it and flashed mightyrom back.Before the flashing of android rom i could use any Sim.My problem is now i can't use my Sim i want anymore for some reason.
PH: HTC Touch Pro 2 rhod500 which is telus cmda security unlocked.
Red,Green,Blue,White Screen-Security Unlocked
RHOD500 32m ss-bc
SPL-1.00.O1 iNex
Does anyone know whats up.I have been searching with no luck.
joe17150 said:
My Htc tp2 is security unlocked.I had Mightyrom on it forever so i figured why not try a new rom.I did not like the android thing so i removed it and flashed mightyrom back.Before the flashing of android rom i could use any Sim.My problem is now i can't use my Sim i want anymore for some reason.
PH: HTC Touch Pro 2 rhod500 which is telus cmda security unlocked.
Red,Green,Blue,White Screen-Security Unlocked
RHOD500 32m ss-bc
SPL-1.00.O1 iNex
Does anyone know whats up.I have been searching with no luck.
Click to expand...
Click to collapse
Ok, so you have a RHOD500 which is a CDMA device first and a GSM device second.
What I mean by this, is if you're using for GSM in the US, then you have to get the SIM slot unlocked.
Installing Android will do nothing at all, whatsoever to your SIM - so lets just leave that on the side.
With all that said, if your SIM worked before I'm really not quite sure what could have changed to break it. The SIM unlock I was talking about earlier wouldn't apply, if the exact same SIM worked previously.
So perhaps explain in detail what you've done and what you're trying to do. Have you changed carriers? SIM's? Anything like that? Does it work on the stock ROM?
arrrghhh said:
Ok, so you have a RHOD500 which is a CDMA device first and a GSM device second.
What I mean by this, is if you're using for GSM in the US, then you have to get the SIM slot unlocked.
Installing Android will do nothing at all, whatsoever to your SIM - so lets just leave that on the side.
With all that said, if your SIM worked before I'm really not quite sure what could have changed to break it. The SIM unlock I was talking about earlier wouldn't apply, if the exact same SIM worked previously.
So perhaps explain in detail what you've done and what you're trying to do. Have you changed carriers? SIM's? Anything like that? Does it work on the stock ROM?
Click to expand...
Click to collapse
Thanks for the reply.I managed to fix this problem by searching and reading .After checking Radio of the phone i seen it was a WV so i installed a WU radio and now my Sim is working.I don't know how my radio got back to a locked wv one but never the less thank god for these forums.Being a rookie at cell phones is rough but at least theirs plenty of help and info on the net.
joe17150 said:
Thanks for the reply.I managed to fix this problem by searching and reading .After checking Radio of the phone i seen it was a WV so i installed a WU radio and now my Sim is working.I don't know how my radio got back to a locked wv one but never the less thank god for these forums.Being a rookie at cell phones is rough but at least theirs plenty of help and info on the net.
Click to expand...
Click to collapse
Ah makes sense, I didn't even think about suggesting that. Enjoy!
Most roms will not load a radio, but a few will. Perhaps when you reloaded your rom changed the radio out. it If you watch the white screen during a rom load it will usually tell you what it is loading. I have some nhb files that will only change the boot screen art. So it is possible to mix and match what is loaded.
Glad you found the issue.
network problem
joe17150 said:
Thanks for the reply.I managed to fix this problem by searching and reading .After checking Radio of the phone i seen it was a WV so i installed a WU radio and now my Sim is working.I don't know how my radio got back to a locked wv one but never the less thank god for these forums.Being a rookie at cell phones is rough but at least theirs plenty of help and info on the net.
Click to expand...
Click to collapse
please tell me from where u got this WU radio software or guide of setting..
please tell me .i too have the same problem..
i was trying to switch the other sim but after that no sim is supporting till now
please give some idea about this problem...
htc service center is also not solving this problem....
avijeet7422 said:
please tell me from where u got this WU radio software or guide of setting..
please tell me .i too have the same problem..
i was trying to switch the other sim but after that no sim is supporting till now
please give some idea about this problem...
htc service center is also not solving this problem....
Click to expand...
Click to collapse
Google.
Hey guys, recently bought a N910V 'GSM unlocked' from the US to NZ so I can save myself a bit of money. Holy **** i was wrong.
I've spent 3 days so far trying to fix it because of no signal, carrier searching error etc.
Its currently Boot loader unlocked, Custom ROM installed, Modem flashed. Still nothing :crying:
Only thing left I can think of is messing with CSC, EFS, QCN (started learning 3 days ago so pls excuse my newbiness :silly: )
Could someone with experience please point me in the right direction and pull me out of this world of trouble?
p.s IMEI is clean and I haven't deleted any partitions.
Apolleon said:
Hey guys, recently bought a N910V 'GSM unlocked' from the US to NZ so I can save myself a bit of money. Holy **** i was wrong.
I've spent 3 days so far trying to fix it because of no signal, carrier searching error etc.
Its currently Boot loader unlocked, Custom ROM installed, Modem flashed. Still nothing :crying:
Only thing left I can think of is messing with CSC, EFS, QCN (started learning 3 days ago so pls excuse my newbiness :silly: )
Could someone with experience please point me in the right direction and pull me out of this world of trouble?
p.s IMEI is clean and I haven't deleted any partitions.
Click to expand...
Click to collapse
Do you need a sim card for the carrier you're trying to use?
douger1957 said:
Do you need a sim card for the carrier you're trying to use?
Click to expand...
Click to collapse
Yes i do. i have been trying with two different carriers/sim.
Do you have the proper APN?
Sent from my SM-N910V using Tapatalk
Apparently you need to activate the phone with a verizon sim card first before any other gsm cards will work in it.
Sim just arrived and nope still no signal even with factory reset activating it with a verizon sim