Develop Bugs

Problems Unlocking Orange SPV M1000 (XDA 2 clone)?

I am trying to unlock my new Orange SPV 1000 I have used the new XDAunlock to no avail, I successfully installed the new program on the device, ran it and got the message successfull repair!! However when I tried my vodafone sim, it asked for the unlock code!! I have tried several times with the sim in and without. Does this new program not produce an unlock code?
Ideas anybody?
Rom 1.60.00 wwe
12/03/03
Radio version 1.10.00
protocol version 1337.18
Ext rom 1.60.38

Same XDA II Problem
I have the same result. Just received an Orange M100 (XDAII) in UK at my office. Downloaded updated program, ran fine without any errors. Attempted to install my US T-Mobile SIM... asks for unlock code. The Orange SIM works fine. (When in US, need to use local T-Mobile SIM.)
Update program must need another update unfortunately. (Darn Orange)

Follow-up to previous post...
Forgot device details, apologies.
ROM Image: 1.60.00 WWE
Radio Version 1.10.00
Protocol: 1337.18
ExtROM: 1.60.38

Are you sure it isnt asking for the sim code rather than the phone code? You say you used xdaunlock, you should be using xda2unlock.

Response
I stand corrected... I was using the correct (XDA2UNLOCK) version. I failed to type the correct version in my previous post.
Yes, I'm confident this is not a SIM unlock prompt. It clearly states that this is a Network Provider Unlock prompt.
Thanks.

unlock
i also buyd a spv m1000 in switzerland an want to try a unlock.. so friends please help this man... 8)

Having just tried the lastest version of xda2Unlock, I'm having the same problem.
I copy the xda2unlock program and run it with my ORANGE SIM installed. It says all is fine and tells me to switch flight mode on and off.
I do that then take out the battery and install my Vodafone SIM. The M1000 then starts up showing "MY Info". the signal meter shows an exclamation mark and when I tap the screen it asks me for my normal SIM PIN. I put this in and the next screen says "Service Provider is locked, Please input unlock code" and has a box and an ok button.
If I try any number, including my SIM unlock code, it comes up with a box saying "Invalid Unlock Code" and it says "You have tried -2147467258 times, please wait until timeout..."
ROM version - 1.60.00WWE
ROM date - 12/03/03
Radio version - 1.10.00
Protocol version - 1337.18
ExtROM version - 1.60.38
Model Number of m1000 - PH10A
I hope you can help me as I'd really like to get this voda SIM working in it.
Thanks in advance
---UPDATE---
P.S. - Just W4XY's post in another thread from this morning ....
W4XY said:
Actually this is not completely true. There are two versions for unlocking an XDA 2. Unfortunately named the same (xda2unlock.exe), but they can be found in two separate threads in this subforum. Read the first post carefully. The latest version is: http://forum.xda-developers.com/viewtopic.php?t=6963
The newer version writes a lock 00000000 to the phone and then unlocks it. However, this process is still quite secure. I have had no report of a phone not working due to unlocking. All problems were in the end related to SIM cards not working (old or blocked) or the phone itself being blocked (insurance claim). One problem that still remains is that Orange phones do not seem to unlock (but the phone remains working normally). That is being worked on.
Click to expand...
Click to collapse
Good luck with sorting out the ORANGE phones....

hogansghost said:
Good luck with sorting out the ORANGE phones....
Click to expand...
Click to collapse
In the thread http://forum.xda-developers.com/viewtopic.php?t=6963 a new version of xda2unlock (version 2.2) has been posted that should perform better on Orange phones.

And thanks to me for posting the Orange M1000 ROM to you in the first place )))
Just joking, it works great guys, unlocked my M1000 in a few seconds.
Kev

X01HT from softbank
Hello guys,
I have same problem with the above topics, same with my HERME200 X01HT, I already have network unlocking code, but I can not enter the code, because it says.
"You have tried 35 times, please wait until time out" however, I've been waiting for 6days ago but still can not comes out. I still can not enter the code.
What would be the solution for this????
thanks for your sharings
Jhemzz

xda1 pw10b1 hangs at startup

hi i have xda1 with t-mobile
it only shows t-mobile and hangs there
it shows
t-mobile
4.01.19
which rom should i use and what is the method to write that rom
Thanx in advance

Normally you should see ROM Version (in you case 4.01.19) and also 2 other Version. But I´m sure, you do not see this numbers....
I think you have flashed the wrong radiostack to your device and now you have GSM Error when you enter the bootloader....
Try this instructions:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan

any thing else
i ve downloaded the same rom version on my phone but still it hangs at the startup with showing
3.17.03
with no radio versions and etc.
The phone was fell down from me and it started the problem from same time.
plz give me solution it is very urgent

You may have damaged some internal component when you dropped the phone. Are you pushing resetting the phone after flashing, by pushing once in the hole under the headset socket then wait one minute and push once more.

You are saying that you have ROM version 4.01.19
If I remember correctly that ROM version can only be unlocked using the SD card method. Is it possible that somebody tried to unlock it and screwed it up?
Either way it sounds like you need a new main board for it.

my phone is finally ok with some problems
i ve successfully made my mobile in working condition by some technical methods but i still have some problems with its software. from where i can get the exact radio stack for being used here in Pakistan. is it wants auto configuration but my operator and country is not listed in that menu.
3.17.03 ENG
6.24.00
324e4
which radio stack i must install and from where i can get it?
Thanks in advance to all members

hi
if someone want to know how i successfuly repaired it u can ask me

RE: my phone is finally ok with some problems
I just shipped an SX56 to a customer in Karachi, Pakistan and he is apparently happy with it.
It was upgraded with this file: sx56_WM2003_update.exe
G1.3.3
RA.33.02
A.30.09

RE: my phone is finally ok with some problems
Forgot to mention it, that file also upgrade the radio stack.

What abt my regional settings
Thanx but cud u plz tell me how can i get logon with my sim card coz my phone is not giving signals ? it wants some kind of customization process but my country's network is not listed in it
Thankx

After trying to upgrade radio stack to version 4.24.20
i just tried to upgrade my radio stack to above mentioned version. Now i m gettin an error message that says "cant upgrade rsu prss ok to restart" it comes again and again. rsu upgrading was done first time with no errors but soon after it,it start giving me that message and in the startup screen it shows the previous version of radio stack which was 6.24.00. Plz tell me what is wrong that i did and how to resolve that trouble?
Thanks

Lost IMEI

G
R
4.01.16....beats me what it means but its dealing with the rom verison i quess. But anywho i tried to upgrade my XDA and now my imei does not register in the phone. Nor does the phone register as charging while in the cardle?
Any help?

Have youused the original exe-file from T-mobile?
There is also the RSU Version changed....
Looks like you have killed your radio stack of the device...
Try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan

In any mobile phone enter:
*#06#
and it'll tell you it's IMEI.
Dunno if this'll help.

wrong imei in phone.

hi. i need help for repair imei of htc dash. it was used with tornado sim for unlock but now phone do not working with it and imei is danger. when i try see imei *#06# phone show 00440000350111200.
if any have how help me for repair imei original, i thanks you

tictac_m said:
hi. i need help for repair imei of htc dash. it was used with tornado sim for unlock but now phone do not working with it and imei is danger. when i try see imei *#06# phone show 00440000350111200.
if any have how help me for repair imei original, i thanks you
Click to expand...
Click to collapse
arent imei's coded to the hardware like a MAC address? not sure if there is much we can do...
when you say imei is danger, are you referring to a sidekick kinda danger? if so, you got me stumped. how did you manage to change the imei?

i talk over imei of phone, it is wrong phone imei original is 351553016438023 but when you try see imei with *#06# phone show 00440000350111200, the two finish numbers is for t-mobile phone but same imei is bad.
the history is: the phone working good 2 weeks with tornado sim for unlock but one day phone show new time sp code entry, tornado sim do not working more for unlock it phone, the own contact to me for unlock it phone and it when i see that imei is bad.
phone is not in black list or other ilegal case. if have error in imei.
i try with wst 4.2.2 and program show it
-----------------------device info:
Wizard Service Tool v4.2.2
29/08/08 09:18:09
CPU Manuf. FAILED
IMEI:
=> Bootloaders:
IPL: þÿÿê (G3 device)
SPL date unknown
Registry AKU: .3.0.1
after it program show error and close.
-----------------read cid
[red]Decrypted stored sum: 2020202020202020
Decrypted calcd sum: CB2C31FAACFE5801
Checksums did NOT match!!
Could not determine a key index to decrypt it.
Your CID block must be corrupted or file isn't
from a valid CID dump!!
Aborting operation.[/red]

cant you call the provider and ask them? it doesnt sound like something that can be fixed on a forum...i may be totally wrong like usual though.. jockyw2001 might have some insight...i dunno

dang thats weird yea jus go with gixxum and call them that would be my best gues

Messing with IMEI numbers is how phones are cloned and, consequently, is illegal in most countries.
There are plenty of tools available but I suspect the Mods will stomp all over a thread regarding their use.
Also, it's a really bad idea to post your IMEI number on a forum.
Honest.
** EDIT - If you must, then post a friends, sit back and watch the bills keep rolling in ...

I had the same problem with my t-mobile wing; which i am using att sim card; the phone and card both unlocked. the only way i found to get rid of the error message was to re flash my phone with a different rom from xda developers. The phone would dial out upon every time it was restarted and cost me 15 cents every time. now i don't have to worry about turning off my phone and getting nickel and dime to death.

i also have the same problem

It is illegal to change an IMEI for ANY reason. Even if it is done accidentally. I suggest not calling your service provider and just getting a new phone.

help to update moto z play!!!!

good afternoon friends, I come to you for some doubts that I have about the update of my team .... I have a moto z play with android 6.0.1 I want to update for compatibility issues in applications, but I have activated the good dual sim so I bought it second-hand, can I update directly to 7.1.1? and from there go up to 8 by means of adb sideload? and what is the procedure since I read that you need to omit the lines of the modem and the sfg to not have problems with the imei ..... someone could help me please? and excuse me but occupy the translator to create the theme.

Can we see a screenshot of your Settings>about phone screen please, showing your device and build number? This should help us figure what device you have and what builds to flash.
Provided you flash the correct firmware for your device, your IMEI should be okay.

echo92 said:
Can we see a screenshot of your Settings>about phone screen please, showing your device and build number? This should help us figure what device you have and what builds to flash.
Provided you flash the correct firmware for your device, your IMEI should be okay.
Click to expand...
Click to collapse
It does not allow me to upload links, but I leave the details of my system ....
Android version: 6.0.1
Baseband: M8953_10208.08.04.47R ADDISON_ROWDSDS_CUST
compilation: MPN24.104-44
I downloaded the firmware: XT1635-02_ADDISON_7.1.1_NPNS26.118-22-2-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
* I do not know if that serves me, if I can directly flash and if I should omit the lines of the commands Modem and Fsg, to avoid losing the imei .....

CondeLuis said:
It does not allow me to upload links, but I leave the details of my system ....
Android version: 6.0.1
Baseband: M8953_10208.08.04.47R ADDISON_ROWDSDS_CUST
compilation: MPN24.104-44
I downloaded the firmware: XT1635-02_ADDISON_7.1.1_NPNS26.118-22-2-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
* I do not know if that serves me, if I can directly flash and if I should omit the lines of the commands Modem and Fsg, to avoid losing the imei .....
Click to expand...
Click to collapse
Thanks, if you're updating, usually it's a good idea to full flash, including modem and fsg. Else you'll have issues with OTA updates.
Normally flashing stock firmware shouldn't cause problems with your IMEI, but without knowing the history of your device, it's difficult to say. If you want to, could you provide your device's get var info?
A) assuming you have ADB and the Motorola drivers set up on your computer, boot your device into the bootloader. Connect your device to your computer via USB.
B) open an ADB terminal and in the terminal type 'fastboot devices' without quotes. Press enter, that should return your device's serial.
C) if you get a response, type 'fastboot getvar all' without quotes in the ADB terminal. Press enter to display a output of your device's parameters.
D) copy paste that output here or upload it somewhere. You may wish to omit your IMEI from the output. That output should tell us if the device was previously unlocked or flashed with a newer firmware.

echo92 said:
Thanks, if you're updating, usually it's a good idea to full flash, including modem and fsg. Else you'll have issues with OTA updates.
Normally flashing stock firmware shouldn't cause problems with your IMEI, but without knowing the history of your device, it's difficult to say. If you want to, could you provide your device's get var info?
Click to expand...
Click to collapse
ok I understand, I explain the equipment I acquired it from use and has a blockage for non-payment in ATTMX that is why they activated the second sim, I do not have backup of the efs and the recovery does not let me, my idea is to go up to 7.1.1 and then go to Oreo by means of adb and already being there to activate the dual sim again and be able to continue using it ... so I ask you if I can skip those commands to avoid taking risks with the imei

CondeLuis said:
ok I understand, I explain the equipment I acquired it from use and has a blockage for non-payment in ATTMX that is why they activated the second sim, I do not have backup of the efs and the recovery does not let me, my idea is to go up to 7.1.1 and then go to Oreo by means of adb and already being there to activate the dual sim again and be able to continue using it ... so I ask you if I can skip those commands to avoid taking risks with the imei
Click to expand...
Click to collapse
Again, if you're updating with the correct firmware and the device had not been flashed with custom ROMs or had downgraded firmware in the past, I do not think you will lose your IMEI. I would recommend you use those commands.
However, if your device was blocked for non payment, are you sure you can even use dual Sims? I'm concerned the previous owner's network provider may have black listed IMEI 1, so even if you update to Oreo, you may only have one active SIM. I'm also hoping that device is from non payment and not stolen...

echo92 said:
Again, if you're updating However, if your device was blocked for non payment, are you sure you can even use dual Sims? I'm concerned the previous owner's network provider may have black listed IMEI 1, so even if you update to Oreo, you may only have one active SIM. I'm also hoping that device is from non payment and not stolen...
Click to expand...
Click to collapse
I suppose they stopped paying, and if right now the dual SIM is activated in the first line which is the original IMEI does not signal, but in the second that is the IMEI 0 if I can use my line but the same way only works for ATTMX, that's why I want to think that updating to 7.1.1 and later to oreo can activate the dual sim back and that it works again like now .....

CondeLuis said:
I suppose they stopped paying, and if right now the dual SIM is activated in the first line which is the original IMEI does not signal, but in the second that is the IMEI 0 if I can use my line but the same way only works for ATTMX, that's why I want to think that updating to 7.1.1 and later to nougat can activate the dual sim back and that it works again like now .....
Click to expand...
Click to collapse
Even if the device says it's dual SIM, the IMEI for one of the SIM slots is likely blocked not by ATTMX but for other providers too (hence the blacklist). I doubt if you update whether you will get dual SIM usage, as your IMEI stays the same usually, so even if you're updated to Oreo, you may still have only one SIM active. The network may just keep rejecting that IMEI number.
I'd honestly think about returning it unless you're happy with just single SIM access.

echo92 said:
Even if the device says it's dual SIM, the IMEI for one of the SIM slots is likely blocked not by ATTMX but for other providers too (hence the blacklist). I doubt if you update whether you will get dual SIM usage, as your IMEI stays the same usually, so even if you're updated to Oreo, you may still have only one SIM active. The network may just keep rejecting that IMEI number.
I'd honestly think about returning it unless you're happy with just single SIM access.
Click to expand...
Click to collapse
does not look, I mean the original equipment is a sim which is blocked for lack of payment, they activated the second sim and obviously that is 0 which if I line with ATTMX and good until now I have no problem it works for me and apart I bought it cheap, the only thing I want is to update to be up to date and so already updated to activate the second sim

CondeLuis said:
does not look, I mean the original equipment is a sim which is blocked for lack of payment, they activated the second sim and obviously that is 0 which if I line with ATTMX and good until now I have no problem it works for me and apart I bought it cheap, the only thing I want is to update to be up to date and so already updated to activate the second sim
Click to expand...
Click to collapse
Yup, so if I've understood you correctly
SIM 1) Blacklisted IMEI due to non-payment by the original owner . Likely will not work even if you update.
SIM 2) I don't think this IMEI 2 gets blacklisted automatically, IMEI 1 is usually the one that is blocked, unless the original owner or ATTMX asked for IMEI 2 to be blocked too.
However, I still think if you update to Oreo, you will not be able to activate the dual SIMs. IMEI 1 will still remain blocked. From what I understand, only the original owner/ATTMX can reverse the block, and as it's due to non-payment, you'd likely have to ask the original owner to clear their debt with ATTMX to clear the block. The block exists on the carrier level, so unless you can change the IMEI (which is something indiscussable on XDA), you are stuck with one SIM, despite having a dual SIM model.

echo92 said:
Yup, so if I've understood you correctly
SIM 1) Blacklisted IMEI due to non-payment by the original owner . Likely will not work even if you update.
SIM 2) I don't think this IMEI 2 gets blacklisted automatically, IMEI 1 is usually the one that is blocked, unless the original owner or ATTMX asked for IMEI 2 to be blocked.
Click to expand...
Click to collapse
if the original IMEI 1 is the one that is blacklisted by the operator, the IMEI 2, which is the one that was activated and is 0, is the one that gives me line, so I wanted to suppose that if I update and when I am in Oreo I could activate it again with the tutorial that goes on the web and thus continue to occupy the IMEI 2 with the line I have ..... now I hope to explain myself .. I doubt very much that the owner pays since we are not in contact.

CondeLuis said:
if the original IMEI 1 is the one that is blacklisted by the operator, the IMEI 2, which is the one that was activated and is 0, is the one that gives me line, so I wanted to suppose that if I update and when I am in Oreo I could activate it again with the tutorial that goes on the web and thus continue to occupy the IMEI 2 with the line I have ..... now I hope to explain myself .. I doubt very much that the owner pays since we are not in contact.
Click to expand...
Click to collapse
So you'd likely have only IMEI 2/SIM 2 active, especially if the original owner has not cleared the balance. I do not know of tutorials that could help you restore IMEI 1 (and they are likely not permitted on XDA). I wish you luck in this endeavour to get your dual SIM device working fully.