Develop Bugs

MDA PRO (NL) ROM upgrade + radio 1.04.02 upgrade!! (guide)

Hi guys!
First of all my very atmost gratitude to all people bringing the right knowledge to this forum! It has given me a lot of ways to tweak and upgrade my MDA Pro (Universal). Thanks again. I upgraded my MDA pro in 30 minutes to the latest iMATE WWE + radio 1.04.02!!
Main benefits for me: built-in SKYPE (that works), Built-in Pocket MSN and NOT built-in, but working now: MS voice command (v1.5)
Since it took me a while collecting all relevant info for upgrading and tweaking my MDA pro, i wanted to share my experiences with you and let you know how i finally managed everything. Also because some posts contain outdated info about the upgrade process. So here we go:
UPDATE MDA PRO (NL) -> iMate Jasjar WWE + radio 1.04.02
----------------------------------------------------------------------
First of all get the right files from:
ftp://xdaupload:[email protected]/Universal
Get the files:
* JASJAR_WWE_11353_137_10301.exe
(from /Universal/Shipped%20ROM/JASJAR_WWE_11353_137_10301/)
and the file:
* UNIVERSAL - JASJAR - Radio Version 1.04.02.rar
(from /Universal/)
- Unpack both files into a separate directory (use WINrar for both)
- Unplug universal (MDA pro) from USB
- In activesync, under connection settings, disable USB en COM connections
- Put MDA pro in bootloader by pressing LIGHT button + Power + RESET
(you can see USB vaguely on your screen, since you don't have backlight on)
- Connect MDA pro on USB; Windows will recognize new USB device
- Launch the file from the WWE update: MaUpgradeUt_noID.exe
- Preform the upgrade (this process takes about 15 to 20 minutes)
(I didnt get any country error here as some described earlier, it went smoothly)
- After it finishes, do not disconnect the MDA pro and DO NOT reset it. Immediately preform the next upgrade:
- Run MaUpgradeUt_noID.exe from the radio 1.04.02 directory
- This will take about 10-15 minutes
- After it finishes, disconnect from USB and give cold reset: POWER + reset
- You'll see the new iMATE splash screen, and then the Windows Mobile screen (first boot will take some time)
- Then the device will ask to first-setup and you're IN!
I did NOT have to install anything from the extended ROM, as others posted. The only thing i needed to do after upgrade was:
* Make new 'GPRS, 3G' connection for T-mobile, using the settings: APN: internet, user/pwd: tmobile
Then I deleted my old partnership on the ActiveSync, and activated USB and COM connections again, and synchronised my device! Et voila!!!
Then I installed my previous apps (see tip list on end of posting) and made the essential registry tweaks to my device, which can be found on:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Alrighty, hope this will bring the same smile to your face as it did on mine
Take care,
Guido
---------------------------------------
Some other tips I'd like to share:
* install Microsoft Portrait v2.3 for audio/video conferencing!! On GPRS is works better then skype for me! Audio is perfect, video connection (even at lowest settings) scrambles the audio a bit!
* Magic Button is top app!
* VNCviewer does a sweet job on the VGA screen (terminal services works fine too, but doesn't go fullscreen)
* of course Tomtom 5.1 + checkpoint 5.02 and/or POIedit
* Resco File explorer + Registry editor (must have!)
* Upgrading to Skype 1.2 beta did not work for me, stick to the default one!

Guido, execellent post!!!
---------------------------------------
Some other tips I'd like to share:
* of course Tomtom 5.1 + checkpoint 5.02 and/or POIedit
* Upgrading to Skype 1.2 beta did not work for me, stick to the default one!
Click to expand...
Click to collapse
Having a diferent build (please see below), I'm very much interested to see your tips on the above, TomTom (normal installation doesn' go...!?!) and skype (pre-installed in my JASJAR, but I haven't been able to have it working at all...!?!)
Thanks in advance.
_________________
BetoX
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (AFTER MANUAL UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE (installed manually using Total Commander)

zeg.... ik kan de bestanden niet vinden op die ftp servers.

tempelier245 said:
zeg.... ik kan de bestanden niet vinden op die ftp servers.
Click to expand...
Click to collapse
Somebody has deleted all files in the upload section, now the most of the files are reposted again(thanx), i guess, their still are missing some shipped roms.
only rom their is for now; JASJAR_WWE_11353_137_10402.rar(if it is a full rom)
So think for now that you have to browse the ftp upload part.
ftp://xdaupload:[email protected]/Universal

simlock
hi
is the simlock from t-mobile removed after you did the update?
because you also updated the radio version........
ok please help, i cant use my MDA Pro cause i have Vodafone!
Thanks in advance

ROM uploaded / reply to questions
Hi guys,
I just read that someone cleared out some files in the upload dir!
So, as we speak the uploading of the JASJAR rom update is in progress. Should be in shipped rom any moment now.
For further replying on your msgs;
- Haven't checked if the unit is simlock free now, but I think i won't be.. I'll keep you posted.
- I read somewhere that Skype needs a minimum of 18MB program memory to run correctly. Right now I managed to get 21MB free, and everything works smoothly.
- TomTom had to be installed with the 4 cabs files, since the original setup didn't work for me (crashed in installer)
And once more; I really love how MS portrait is working for audio/video conferencing. Especially since of 15-11-2005 I'm using UMTS (!) on T-Mobile NL
Looking forward to your experiences.
Take care,
Guido

thanks guido.... how are you using umts on t-mobile ???

Is it possible to put back the original mda pro rom if something goes wrong... like a registry edit.... I don't really know how everything works and I don't want to destroy my new toy !!!

Reply / Exec ROM update / UMTS / Appz / Reg tweaks
Once you upgrade you go beyond the ** Point of no-return **
But sometimes you gotta take some risks in life to advance
Actually again I took the risk yesterday of trying out the XDA Exec ROM upgrade. And I must say; this one works pretty fine for me too. And right now I gained 22,35MB free RAM memeory, so I managed to get Skype 1.2 beta running!
Furthermore I'm test using the UMTS network of T-Mobile NL. I already clocked speeds up to 320 Kbps in the downstream; pretty neat Skype and Portrait work excellent on these new speeds.
And I've tested if the upgrade unlocked the device; but.... as I've expected: no....
For now I would suggest going for the O2 Exec upgrade, also since it has the 1.04.02 radio builtin. Things I like more about this upgrade:
- More FREE program memory (allowing skype 1.2 to run for example)
- Nicer SPLASH screen
- Seems to operate a bit faster
Once you installed the Exec ROM you can choose 'Install Type' under programs; this is where you select the Corporate Mode, and then give in the code 0506. (This wasn't really described clearly for me in the other posts). Then reset. Furthermore I deleted all other O2 stuff on the device (don't forget the shortcuts under Windows\StartUp). Actually I only left sddaemon in the startup group, giving me max of working RAM.
Thus, now running:
R 1.04.02
D 1.13.48
G 42.37.P8
installed appz:
- Skype 1.2 beta
- TomTom 5.1
- MS Portrait v2.3
- MS Voice Command v1.5
- Resco File Explorer
- Resco Registry Editor
- Magic Button
- Pocket Informant 2005
- Some small utils: 'Running Programs'/'Reset'/'CloseAll'/'TrayLaunch'
- Total Commander (only for vieweing Ext Rom)
and registry tweaks: (see my first post)
- GPS
- Fonts
- Bluetooth OBEX
- data connection always on
- soft buttons changed
- MS voice command for Bluetooth headset
- Glyph cache size
- Terminal Services cache size
- Homepage hardware button change
All works deliciously
cheers,
Guido

Reply / Exec ROM update
Hi,
I just took the risk to advance, however when upgrading to the XDA Exec ROM I got the message that (after doing the hardware inspectation):
ERROR 120: Country ID Error
The ROM image that you are trying to use is not designed to work on your device.....
I have an MDA Pro.
Anyone have useful ideas?
Thanks in advance.
Greetz,
Ramoray

Re: Reply / Exec ROM update
ramoray said:
Hi,
I just took the risk to advance, however when upgrading to the XDA Exec ROM I got the message that (after doing the hardware inspectation):
ERROR 120: Country ID Error
Click to expand...
Click to collapse
I read this before in other posts. It seems that when you launch the updater the 2nd time, it doesn't produce the country error anymore
Hope this will be the same in your case!
And another important thing mentioned before; I used MaUpgradeUt_noID.exe (from the Jasjar file or Radio 1.04.02 file) to preform the upgrade. Just copy this file in the Exec directory and launch it; it will display another xda, but this is normal and will work fine for the universal
Good luck!
Cheers,
Guido

umts and simlock
Hi Guido,
thanks again for your cool posting every time! You keep us informed.
First off all pretty that the Simlock isn't removed after the update! I want to update too but first i want to remove my simlock. After that i will do an update and use my device just like i used mine Qtek 9090 before!
1 More question is about Tom Tom 5.1 when i try to install it i get an error is there an guide out there to install Tom Tom 5.1 on WM 5 ?
Ok thanks for now and keep us informed!
Surinamer!

Thanks guido.... I'll take the risk.... but how did you get the umts on your mda because the info I got said that umts on a t-mob network will be available from 2006

upgrade MDA Pro rom
Hi Guido,
Thanks for your useful info. The MaUpgradeUt_noID.exe did the job, my T-Mobile settings are gone now.
However I didn't had the time to do the XDA upgrade yet, but will do tonight.
Anyway thanks.
Greetz,
Ramoray

Re: upgrade MDA Pro rom
ramoray said:
Thanks for your useful info. The MaUpgradeUt_noID.exe did the job, my T-Mobile settings are gone now.
However I didn't had the time to do the XDA upgrade yet, but will do tonight.
Click to expand...
Click to collapse
Congratulations! Welcome to the other side
I'm curious what you'll think about the Exec in comparison to the Jasjar.
Keep us posted.
Cheers,
Guido

Update 21/11: Video calling is supported now; call T-Mobile NL helpdesk to activate it (see my further posting for other tips)
tempelier245 said:
Thanks guido.... I'll take the risk.... but how did you get the umts on your mda because the info I got said that umts on a t-mob network will be available from 2006
Click to expand...
Click to collapse
Will you go for the Exec or the Jasjar upgrade?
Concerning UMTS; I'm test using it on T-Mobile NL. Officially it will be launched in 2006. I'll keep you informed about the progress.
Video Calling isn't yet supported on the MDA, but the data connection is! Topping at 340 Kbps, which is pretty fast for a mobile device
Cheers,
Guido

gnuijten said:
tempelier245 said:
Thanks guido.... I'll take the risk.... but how did you get the umts on your mda because the info I got said that umts on a t-mob network will be available from 2006
Click to expand...
Click to collapse
Will you go for the Exec or the Jasjar upgrade?
Concerning UMTS; I'm test/beta using it for T-Mobile NL. Officially it will be launched in 2006. I'll keep you informed about the progress.
Video Calling isn't yet supported on the MDA, but the data connection is! Topping at 340 Kbps, which is pretty fast for a mobile device
Cheers,
Guido
Click to expand...
Click to collapse
Hi There,
From today i noticed that I have an UMTS connection on my MDA PRO. I have flashed my MDA pro with anouther rom. UMTS is working fine. Making a videocall is not successfull. Do you have any tips to make it work or is it not supported by T-mobile

Qtek 9000 error and upgrade to imate latest firmware?
Hi,
Have been reading through all of your responses. Very impressive.
Today i received my Qtek 9000.
It seems to be a wonderful phone and with the subscriptions vodafone has in sweden i get free calls and free downloads. Looked great.
Now to my problem.
I´ve put in all settings that vodafone provides for other ppc´s and it´s working on them.
It connects, dissapears, connects again.
And i get:
Cannot Connect:
Dialed: services.vodafone.net
Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer´s documentation and try again.
I´ve downloaded these 2 files:
JASJAR_WWE_11353_137_10301.exe
UNIVERSAL - JASJAR - Radio Version 1.04.02.rar
Will an upgrade remove my problem?
But my question is, i bought it at expansys, why buy qtek if i could have bought an iMate instead? I mean will i now rebrand it to be an imate?
Are there no software updates from qtek?
Since this one is brand new, should i return it and get an iMate instead?
I will also need to get the regfix for swedish keyboard, would be entirely greatful if it could be arranged.
Very first message from a brand new forum member!
Best regards,
Daniel Eriksson

Guido,
Is it possible for me to get acces to the umts from t-mobile.. Furthermore I'm thinking that I will install the exec rom on my mda pro. I'll receive my device tomorrow so I'll see. Do you think its a good purchase ??
Thanks

guido.... btw ik snap echt geen f*ck van dat editen van je registry.... kan je me misschien in het nederlands uitleggen wat het inhoud/betekent ?

Rom Upgrade, 4gb mem card and HTC S100 bluetooth stereo headset

Hello Guys,
I have a Qtek 9000 with original French Rom : (bought in feb 2006)
ROM 1.13.72 FRE from 10/13/05
radio 1.03.00
protocol 42.36.P8
extROM 1.13.166 FRE
I have been around a lot of threads, but it is hard to follow up on everything
Basically, I wish to upgrade my ROM to a more recent AKU.
What is the latest version developed in French ?
If there is a much better one that appear to be in English, I will take it.
could you then post me both versions and let me know which one should I really chose.
Moreover, I want to buy 4gb mem card, or even 8gb.
I have read about the "cam issue", no big deal
will this new AKU allow my qtek to support the 4gb or even the 8gb ?
is SDHC ok or is there any 4gb SD only ?
Finally, I bought some bluetooth stereo headset HTC S100
they were very promising, but revealed not to be fully compatible with my pda.
the remote control didn't work out, just like the simple listening of media files.
In fact, I was only able to pick up a call, but with bugs when hanging off.
in fact the two required norms (AVRCP and A2DP) are just not supported by the pda (too old... I was told by HTC)
will the new AKU allow it to actually work ?
Thx a lot for the help you can bring me
Pierre

You can start by upgrading your bootloader to 1.01, this will allow you to update with newest roms here..
I think here you can find only english roms, and I recommend you the Crossbow one.
Take a look about the WM6 - 2.00.03 PDAVIET version, is the more stable for me and has good stuff for A2DP purposes.
REMEMBER: You can always fall back to an outdated old rom if you wish, so, don't esitate! But flash it carefully
Nothing to say about SDHC

thx realogic.
if I understand correctly, I need first to upgrade my bootloader - how do I do that ?
then instead of a WM5 AKU (such as 3.5) better to go straight to WM6 (crossbow) - where can I find it and how do I process ?
but more importantly... how do I create a safe backup first ?
thx again

Here the bootloader utility ftp://xda:[email protected]/Universal/Bootloader_Upgrade/JASJAR_BL1.01_RUU_v1.2.exe
Just launch the app and it will upgrade,
for upgrade a rom, normally it comes RARed or zipped, just extract and launch the exe inside, you'll find more help searching on the forum
Here all the WM6 Roms:
* ROM v2.00.02WWE - Midget1990:
http://www.box.net/public/0vjfdb0fvn
* ROM v2.00.02WWE - Helmi:
http://www.box.net/public/zi8kncf5mg
* ROM v2.00.02WWE - Indra:
http://www.megaupload.com/?d=176QIXJM
* ROM v2.00.02PV (WWE) - Tom_codon:
http://www.box.net/public/cbfn87i64h
* ROM v2.00.03PV (WWE) - Tom_codon:
http://www.box.net/public/acznryck8b
* ROM v2.00.04PV (WWE) - TEST:
http://www.box.net/public/6n0xi6yitp
PASSWORD: PDAVIET or PDAVIET2505
I would recommend to use the 2.00.03PV one.
Also, upgrade the radio firmware to 1.14, you'll find searching in the forum
About the backup, I don't remember the names of that kind of app, but i'm sure you'll find some here.. just.. as always.. searching

SDHC dont even think about it.it wont work, sd and sdhc are different- u can use sd in sdhc capable device but not sdhc in sd-device. and as far as i know tere aren't any bigger sd cards than 4gb. (btw. officialy universal supports 2g bmax). and about sdhc dont believe nuclear/infidel (as i remeber he wrote that he runs sdhc in universal-thats crap)

Windows Mobile 6 Thread Links

As the Hermes Windows Mobile 6 forum is now being cluttered with stickies, this should provide you ppl who cannot use the search function to access your Threads... Please post the relevant questions/bugs/information into the appropriate threads.
Windows Mobile VI - Black Edition 3.0.1 (initial release 07-05-2007)
Dutty's Windows Mobile 6 Premium v2 (initial release 22-04-2007)
LVSW Windows Mobile 6 (initial release 19-05-2007)
Sleuth's Developer Variant (initial release 21-05-2007)
WM6 Cooked ROM - 3DES.5 (initial release 30-04-2007)
Custel Windows Mobile 6 - 2.5 (initial release 17-05-2007)
WM6 CCS WWE Asia Edition (CHS/CHT/JPN) (initial release 25-04-2007)
Dopod WM6 Test ROM (initial release 20-04-2007)
Window Mobile 6 Vanilla (initial release 26-02-2007) [unsupported]
Xda-Live Windows Mobile 6 (initial release 21-02-2007) [unsupported]
WM6 translation to German (initial release 11-03-2007)
Upgrade Guides
Hermes - by mrvanx
Configuration Apps
Provxml and Xml Config Loader
Shaun33 Sip Configuration App

People Please dont post in this thread!!!, can mods remove these posts?

Help Downgrading Black pro 2.0
Could anyone tell me how to "downgrade" my Black pro 2.0 do the WM5 1.35 ROM? I am having trouble with some applications in the Black. I tried running the upgrading utility for 1.35 ROM but it doesn't recognize the usb connection. I thought it might be a problem with the SPL 1.40 Olipro and changed to 1.10 Oli... still the same problem. I tried changing it to 1.10 MGF but mtty won't recognize the usb connection either. It's not a problem with my usb port because everything else works fine, including the phone syncronization. Any help is appreciated.

Icarps said:
Could anyone tell me how to "downgrade" my Black pro 2.0 do the WM5 1.35 ROM? I am having trouble with some applications in the Black. I tried running the upgrading utility for 1.35 ROM but it doesn't recognize the usb connection. I thought it might be a problem with the SPL 1.40 Olipro and changed to 1.10 Oli... still the same problem. I tried changing it to 1.10 MGF but mtty won't recognize the usb connection either. It's not a problem with my usb port because everything else works fine, including the phone syncronization. Any help is appreciated.
Click to expand...
Click to collapse
this isnt the proper place for this type of question... please read and search.. there are threads on here for what you are looking for.
http://forum.xda-developers.com/showthread.php?t=301370
I also removed the requested posts...

my oppinion: go and spend 30mins-1 hour and read through the threads for each rom andmake up your own mind, failing that try them all out.
if you cant be arsed then dont bother with wm6.

Do not post in this thread... this thread is for links, not support!!!

BLACK 3.5 Is Released!!!!
BLACK 3.5 Is Released!!!!
http://wmblack.info/
Hurry UP!

shogunmark said:
Do not post in this thread... this thread is for links, not support!!!
Click to expand...
Click to collapse
I know, but I'd like to point out a question for this list: besides the start date, is it possible to add even the date of the newest release please? This can easily help to figure out which are the most active releases vs the ones which have a more discontinued developing.
Thanks
PS: then, feel free to delete my post after the mods have seen my request

akzion said:
I know, but I'd like to point out a question for this list: besides the start date, is it possible to add even the date of the newest release please? This can easily help to figure out which are the most active releases vs the ones which have a more discontinued developing.
Thanks
PS: then, feel free to delete my post after the mods have seen my request
Click to expand...
Click to collapse
I 100% AGREE WITH YOU, THIS IS A MISLEADING POST, AND IT IS A STICKY ONE, SO IF A NEW MEMBER LOGGED IN HERE HE WILL USE AN OBSOLETE ROMs, WHILE WE HAVE NOW THE BEST ROMs BASED ON THE NEWELY RELEASED OFFICIAL ROM.

PDA VIET's ROM
there're alots of roms

Can I echo the request that this potentially very useful thread be amended to reflect the last amended date (of first post on the thread) rather than first post date?
Currently this thread doesn't really have any real value for the people it's intended to help.
(Can I also suggest it gets locked except for amendments or addenda by mods?)

Thank you!!!!!!!!

Never works
I follow the steps and i get to the point were it says you are now ready to update rom image and hit next it then wants a reply on my device to continue when i hit yes it goes to the ttri color screen looses it connection with my computer and the ruu program says it also lost connection.
phone info:
IPL-SSPL by Des
SPL-1.09.ds
Rom version 2.15.502.3
Rom date 4/09/07
Radio version 1.40.30.00
Protocol version 32.73.7020.16H
I need help i have used other peoples methods and d-loads and cannot get it passed the 6th stage were it is ready to update.
Thanks for any info, Mrextrem

@MODS
Can you unstick this thread? It is quite outdated now...

Looking for WWE WM6.5 Naked Rom

Hi,
I'm really looking for a WWE WM6.5 Naked Rom for the P3600 Trinity
Not interested in many apps or fancy menu's (I usually disable any menu pluggins such as QMenu etc.)
All I would like is:-
Plain Boot Loader Maybe with wording such as "P3600 - Trinity"
Calc
Calendar
SMS
FDC Soft Task Manager
RegEdit
CorePlayer (TCPMP)
QuickGPS
TomTom Navigator 7.450
Current System Setup:-
CE OS 5.2.21215 (Build 21215.5.0.0)
Processor - SC32442A-400Mhz
Rom Version: 3.00.707.18
Rom Date: 04/18/09
Radio version: 1.56.70.11
I use a company sim which doesn't allow data in anyway (no MMS / No 3G / No GSM) only through the USB / Wireless / Bluetooth.
The reason I ask is because the rom i'm using seems to have a memory leak, and needs daily rebooting.
I currently use the AthineOS on the TyTnII and quite like it.
I have tried many roms, and although they work reasonably well, I could do with something a little more "personalised"
Many Thanks,
Wayne.
Too scared to cook, not afraid to test and naturally cheeky!
Devices:-
WM 6.5-
HTC TyTn II
HTC Trinity P3600
WM 2003-
HP Ipaq 6340
HP Ipaq 6515 (Beetle)
HP HW2210

Trinity WWE / wm6.5 build 215725 Lite
Try the followed rom
Trinity WWE / wm6.5 build 215725 Lite
thai rom in english
its lite version
link
http://www.mediafire.com/download.php?2irgtzytjgc

just downloading now - thanks!

Just loaded the rom.
Looks quite nice.
seems very stable without any glitches
I will report back, but at the moment it seems stable and fast - even when i install TomTom7

I downloaded the file but when I run it, after my phone reset, the software said "Could not connect to PDA" and stop upgrading.
Can someone help me?
Thank

Hi, I'm gonna try it, and then I'll give my opinion.
Thanks.
Ricky

tudn said:
I downloaded the file but when I run it, after my phone reset, the software said "Could not connect to PDA" and stop upgrading.
Can someone help me?
Thank
Click to expand...
Click to collapse
Did You get install the ROM? Or it was when you were up dating it?

ricky chan said:
Did You get install the ROM? Or it was when you were up dating it?
Click to expand...
Click to collapse
After all step of checking ROM version, start updating only (0%), my PDA reset and error.
I don't know why.

tudn said:
After all step of checking ROM version, start updating only (0%), my PDA reset and error.
I don't know why.
Click to expand...
Click to collapse
i assume that you use an official rom or you have flashed official spl.
read this and this

Hi arnooo
I try this rom but camera don't work... you know how?

Upgrading 02 XDA IIS to Windows Moblie 6.5

Ok, above I can see exactly 5 "threads" on how to upgrade the 02 XDA IIs ie (HTC Blue Angel) to windows 6.5.
It clearly states DO AT AT YOUR OWN RISK, which has got me pissing in my pants.
I LOVE MY PHONE, but would also love to have windows 6.5 on it.
Here is the below info if it helps.
model number : PH20B
rom : 1.31.00 WWE
rom date : 12/13/04
ExtRom : 1.31.920 WWE
Windows Mobile 2003 Version 4.21 (build 14132)
Chef Tony and his tutorials are exhaustive : http://forum.xda-developers.com/showthread.php?t=630416
Hence, if someone could kindly give it STEP BY STEP or perhaps POST A VIDEO OF IT, it would really be helpful, as I really want to upgrade my phone.
Oh yea and one more thing please, silly question but where the heck is the record button anyways ? I need this info so I can enter the Bootloader Mode (pressing power+record and reset)
Kind Regards
RD

Chef Tony has given it step by step very nicely. Upgrading a WM5/6 device
FOR XP USERS, WHICH IS ME.
He says to skip the first 2 steps if memory shows as 60 MB something, mine shows 121, should I skip the first 2 steps then ?
He says : 6.b copy the contents of this package to the same folder: MAupgradeUt_noID - I guess I have to get the MAUpgradeUT-NOID.exe from someplace, anyone got a link ? cant seem to find it.
my rom comes with EXTrom - does that mean I skip point 10 ?