Greetings -- I've upgraded to BT 3900 for Motorola HS850 hands-free, which works, although with static.
Now, I got i-tech Clip, and it worked as a hands-free as well. But read on.
I wanted to try it as high-quality audio setup, so I got the profiles -- although for build 3500 -- off the ftp. It did show that profile, but quickly failed to dicover the service on i-tech. As I deleted the hands-free profile, I try to get at least that back. Alas! Now it doesn't connect to hands-free i-tech either.
I've tried: installing 3500, 160.600, -- still discovery fails. What's the rollback procedure to get 3900 with its profiles back?
Braver, I also have Clip S35 from i-Tech. It works so fine with my Xda II (Widcomm Stack + Handsfree Profile and A2DP)
Did you try to reset your Clip S35 and try to pair it together again?
How did you get the A2DP profile? I've installed the profiles for build 3500 from the ftp, it added high-quality audio (is it _the_ A2DP?). I had BT 3900 by then, then reinstalled various versions after i-tech could not be found the second time.
Is it OK to install the extra profiles for build 3500 with 3900?
And, when you do get an audio profile and a hands-free one, how you differentiate -- say, you listen to music and receive a call?
Sorry braver, I misunderstood ...
What I've is :-
1. O2 Xda II
2. O2 Xda II Mini
3. i-Tech BlueCON
4. i-Tech Clip S35
5. IBM X31 (My Laptop)
And I played with them like this:-
(O2 Xda II Mini + IBM X31 + i-Tech BlueCON + i-Tech Clip S35)
I pair my Mini with Clip S35 with the Handsfree Profile. I also connect my BlueCON to my X31 (plug the audio jack of BlueCON to the audio output jack of X31) and pair my Clip S35 with BlueCON.
When I listen the music from my X31. My X31 send the audio output to BlueCON and BlueCON stream the audio data to Clip S35. So I can hear the music.
And when I have the incoming call on my Mini. My Mini connect to my Clip S35 so my Clip S35 stop the music from BlueCON and go to Handsfree Profile Mode. After the hang up the phone line, Clip S35 start the music again automatically.
==================================
For BA, I've seen from the forum but it's Thai language:-
http://www.pdamobiz.com/show_news.asp?NewsID=41062&PN=1
They said that they installed PDA2K_BroadcomCorp_BTUpdate.cab from xda-developers.com like you did and every was so fine.
Please try to check and let me know if there's what I can help.
(Also, don't forget, PIN for Clip S35 is 8888. It's not 0000)
I.tech S35 paired with WM2003 SE with Widcomm 1.6.0600
Guys, help.
I have a WM2003 SE unit with Widcomm 1.6.0600 stack and I just acquired an I-tech S35. I have the following things working:
1. Mp3 over bluetooth using Windows Media Player 9 and the high quality stereo profile.
2. Headset connection for outgoing calls.
I have the following problems:
1. with the mp3, I get interference or what I assume is interference. if I move around too much, the sound becomes choppy.
2. with the headset, I can't receive incoming call. when the call comes in, it doesn't get directed to my S35 even when it's linked via headset mode. I have to answer the phone directly from my XDA2. I tried linking the S35 with a Nokia 6600 and the incoming call is redirected perfectly well into the S35.
3. I can't get the S35 to work in "buzzer" mode, even when I pair it with a Nokia 6600.
4. I've tried calling out and the person I call always says that my call is very unclear.
Does anyone else have problems like this or has been able to resolve these problems? I could use the help or I'd be forced to sell this unit since it's practically useless to me with particularly with the second problem.
Thanks and best regards...
Winston
Hi wsabido168,
1. with the mp3, I get interference or what I assume is interference. if I move around too much, the sound becomes choppy.
Ave*: I don't think that I have the interference problem but the sound is not come out smoothly. I hear the noise like you cooking the pop corn around every 15 seconds per time. You should try to contact to the shop that you bought it and ask them to try with another one.
2. with the headset, I can't receive incoming call. when the call comes in, it doesn't get directed to my S35 even when it's linked via headset mode. I have to answer the phone directly from my XDA2. I tried linking the S35 with a Nokia 6600 and the incoming call is redirected perfectly well into the S35.
Ave*: Mine is not. I can receive the incoming call from S35. I feel like there's something wrong with your XDA II.
3. I can't get the S35 to work in "buzzer" mode, even when I pair it with a Nokia 6600.
Ave*: You can turn it on and off. Please check from the manual. It said that you need to press the button (I can't remember which one) to on and off the buzzer mode. (This problem may relate with your 2nd question, I just guest)
4. I've tried calling out and the person I call always says that my call is very unclear.
Ave*: This question may relate with the 1st question. Mine is clearly (I asked from the other side)
Hi Ave, first of all, thanks for the information.
May I ask what software you have on your system? for example, what bluetooth stack you're using and what version of the OS? Maybe I can reflash my OS to whatever you're using to get it to work properly.
Thanks and best regards...
wsabido168, you're welcome ... I've 2 of XDA.
The first on is my XDA II:-
ROM: 2.06.00 WWE
RADIO: 1.18.00
ExtROM: - (Big Storage)
Bluetooth Stack: Widcomm Bluetooth Stack 1.5.0.2000
The secound one is my XDA II Mini:-
ROM: 1.12.00 WWE
RADIO: 1.13.00
ExtROM: 1.12.119 WWE
Bluetooth Stack: Microsoft Bluetooth Stack
questions:
1. with the XDAII running Bluetooth Stack 1.5.0.2000, where'd you get the Bluetooth Stack 1.5.0.2000? how do I download and from where it?
2. when you're using Bluetooth Stack 1.5.0.2000, can your XDAII receive calls and automatically redirect it to your i-tech S35 even when you're playing mp3s?
3. with Bluetooth Stack 1.5.0.2000, do you have the profile for "high quality audio" with which to use the mp3s over bluetooth?
Thanks and best regards...
Winston
Answer 1
Read from here:
http://forum.xda-developers.com/viewtopic.php?t=17186&highlight=bluetooth+headset+high+quality
Widcomm 1.5.0.2000 File:
http://forum.xda-developers.com/download.php?id=2379
Registry File:
http://forum.xda-developers.com/download.php?id=2378
See here for the picture:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=39555&PN=1&TPN=1
Answer 2
I think the answer is No,
XDA II has the Microsoft Bluetooth Stack installed from the manufacturing. It has Headset Profile but no A2DP (High Quality Audio) available. But if you want to have A2DP on XDA II, you need to install the Widcomm Bluetooth Stack.
The stack from Widcomm has A2DP and can be run on XDA II (but not work on XDA II Mini)
After you install the stack from Widcomm, you'll be able to listen MP3 using Clip S35, but if you want to use your Clip S35 to answer a call, you have to stop the Widcomm Stack and start the Microsoft Stack instead.
Microsoft Stack and Widcomm Stack can be run on XDA II but not the same time.
Answer 3
Yes, Widcomm 1.5.0.2000 has A2DP See Answer 1 for more detail.
Will it work on WM5?
I haven't try it yet but I don't think that it will work on WM5. I'm not so sure, still need someone in this forum to answer for us.
Do you know?, i-Tech has a A2DP software for Symbian OS. It's BluePlayer which I used to try on Nokia 6600. It's really cool because you will be able to listen to the music with high quality audio, also you can answer the phone call with this Clip S35 too.
I used to contact to them to asked for the A2DP software for my Magician. But the answer was they didn't have a plan to do it yet.
Has anyone managed to get Widcomm A2DP working with the headset profile?
wamatt said:
Has anyone managed to get Widcomm A2DP working with the headset profile?
Click to expand...
Click to collapse
On WM2003SE or WM5? With the former, I've used the A2DP profile with Zonet ZUB8100 stereo BT headphones to listen to MP3s. Works pretty well; no static until I get 5-10 meters from the SX66.
Haven't installed WM5 yet, and I don't intend to in the near future.
Hey guys,
Thanks to all the information from you guys, I have gotten it to work (A2DP and bluetooth with my S-35 headset and XDAII (installed with WM2003SE) but still have a problem with the fact that the Broadcom does NOT permit received calls to be redirected to the headset therefore giving it less functionality than if I were using a Nokia cellphone with this headset.
If anyone has a fix to this problem, please let me know.
Thanks and best regards...
Winston
Winston, I took a long time to search on the internet but nobody could give me the information to fix it.
Somebody said that the problem of Headset Profile from Widcomm Bluetooth Stack and Xda II is about the Audio Gateway and Wave Driver. The Wavedev.dll didn't redirect the audio output to Handfree Profile of Widcomm Bluetooth Stack. This is all that I know about.
Anyway, nice to talk to you. Feel free to let me know if there's somethings that I can help or what we can share.
Ave*
ok. thanks again Ave.
3waygeek said:
wamatt said:
Has anyone managed to get Widcomm A2DP working with the headset profile?
Click to expand...
Click to collapse
On WM2003SE or WM5? With the former, I've used the A2DP profile with Zonet ZUB8100 stereo BT headphones to listen to MP3s. Works pretty well; no static until I get 5-10 meters from the SX66.
Haven't installed WM5 yet, and I don't intend to in the near future.
Click to expand...
Click to collapse
I'm on WM2003 Rom 1.40 with WMP10. I can get A2DP working as well, however headset doesnt work properly then (IE can't take calls on the headphones).
Also another annoying problem is that WMP10 turns off after 5 minutes (ie screen goes blank), this interrupts the A2DP session, and I have to reconnect.
Hi,
I just recived my BT800 today, and it pairs fine with the Hands Free profile, and i can hear things fine through the BT800's speaker... but it doesnt seem to be transmitting voice? at all... ie. like the mic is turned off or somthing?
Anyone got any ideas?
BTW, i've allready updated the firmware, that didnt make any dif to the mic not working
Regards,
SiriX
Thanks for the information about the available upgrade, didn't know that.
But NO, sorry, cannot help with your issue as I have no such problems with my Jabra.
I use the iMate ROM
Ruud
BT800 - same problem
I have the same problem.. can hear loud & proud but no microphone.. although it works on voice calls. Will post a fix if I find one - anybody else got any suggestions?
Just got mine as well. I already upgraded firmware to 0.32. When I paired it with my i-mate Jasjar, it said "Bluetooth Headset" and "Seria Port" - I checked both, not knowing why I'd want the serial port, but thinking that it might be for general speaker and mic use. Still don't know...
New firmware 0.322 didn't seem to help. I could for sure be doing something wrong. I'll do more research and get back to this board.
are u using it with the universal?
i pair my bt800 with the universal and all i see is handsfree option, no serial port.
my problem is that the sounds cut, and i´ve very much noise on my conversations, in special in my talk...
All,
Can anyone recommended a good bluetooth headset kit that works with the MDAIII. I would like the facility of pressing the headset button and saying the person's name I want to call.
Also I would like the person name announced when I receive a call.
Is this possible?
Thank
Msuk
Logitech Mobile Pro was recommended.
So far no problem. It works fine.
For the voice recognition, I guess you need a separate program. Mine does not work any more since I upgraded the op.sys.
msuk said:
All,
Can anyone recommended a good bluetooth headset kit that works with the MDAIII. I would like the facility of pressing the headset button and saying the person's name I want to call.
Also I would like the person name announced when I receive a call.
Is this possible?
Thank
Msuk
Click to expand...
Click to collapse
hi guys, i need your help about my bluetooth headset.
I bought the bh-101 nokia bluetooth.My rom is Artemis touch 3.0 WWE
I listen the conversations when i making calls but i do not have sound from the mp3 folder, no sound from the destinator program, this sounds only from the htc.
The pairing is ok.I have this bluetooth and tested also to a normal mobile on z610I, and i have the same problem, i listen only the calls not the music from my folders.
Why?
thanks a lot
btaudio
ok.btaudio is the solution
thanks anyway
Hi,
I am looking for a way to stream audio from the Touch HD to my Car. Unfortunately the cars built-in audio system doesn't support bluetooth. But there is that handsfree-thing, which works really great with calls. So I wondered, if there is a software solution that streams my music from the phone as "incoming call" to my car?
I've tried "acbToggleBT" and "BTASP" and both didn't work in the Car, but they did work with a bluetooth headset.
It would be really great if somebody knows, finds, posts, programs or has an solution.
Thanks in advance!
Greets from Bavaria, Germany
berkley
I can't remember but there was an option to route normal audio to the bluetooth handset in my HP iPAQ which is missing from HD.
Believe me music streaming to HSF device will be as good as listening to AM radio on poor reception. Go get a bluetooth A2DP profile audio headunit like Sony - MEX-BT2500 (this is the one I use and works like a charm).
Thanks for your reply.
Perhaps I took the wrong words to explain what I am looking for.
The thing I want is a piece of software that "imitates" an incoming call and sends the audio from S2P to the handsfree of my car.
Maybe this explanation is a bit better...?
[edit]
have you tried BT Audio
it's a paid app
acbToggleBT always worked for me
try this
There are 3 apps
btaudio on
btaudio off
bttoogle (on/off)
i made a cab file for it
camro said:
try this
There are 3 apps
btaudio on
btaudio off
bttoogle (on/off)
i made a cab file for it
Click to expand...
Click to collapse
Excellent. I can get this to work via bluetooth headset.
Unfortunatley this didn't work in my car (which is what I believe the OP wants).
http://220.232.214.116:8088/attachmentes/Day_071224/31_270270_b7dcc_pxdxa.btaudio.zip
I use this application, works terrific!!.......enjoy
ausi - does this work on a car stereo i.e. does it emulate an incoming phone call?
binning said:
ausi - does this work on a car stereo i.e. does it emulate an incoming phone call?
Click to expand...
Click to collapse
All i can say is this based on using it on my HD with WM 6.1 & 6.5 (Dutty ROM):
Once you install the program and then execute it (Press On):
It will transfer all Music & Audio from Movies (Core Player) etc. to my BT Nokia Headset or my BT Car Speakerphone (Motorola T305), i do not have a Radio BT set so i can't tell you, you'll just have to try.
This Cab solved my problem as the basic BT HD ROM sertting only transfers the Phone audio while this little cab transfers ALL audio, so i would presume that it may help you with your BT radio, you can always uninstall the cab if it doesn't work for you.
There is NO emulation invloved here!!??
Good luck!
Hi Ausi, tried on my Nokia BT car handsfree but no joy
The handsfree only accepts an incoming call as stated above so some sort of emulation may be needed. Would be happy if someone knew about something...
ausi said:
This Cab solved my problem as the basic BT HD ROM sertting only transfers the Phone audio while this little cab transfers ALL audio, so i would presume that it may help you with your BT radio, you can always uninstall the cab if it doesn't work for you.
There is NO emulation invloved here!!??
Good luck!
Click to expand...
Click to collapse
Funny... my HD does the reverse. I get de BT audio but on the BT phone I got nothing but static...
I've got a Sony Xplod bluetooth radio in my car.
When I start up it automatically connects to my HD, however it only connects as handsfree rather than both handsfree and BT stereo.
I have to go into comms manager and bluetooth settings, then select and hold on the xplod in the device list.
A menu comes up asking what I'd like to connect as, and I pick stereo, then repeat for handsfree.
Give that a go. Holding on the device to bring up the menu gives you the BT profiles the device is capable of, so with a bit of luck stereo/headphones will be an option for you.