Related
Hi
I'm looking at purchasing an XDA IIi from O2, both to use as a PDA, phone and for SatNav. It's likely that I'll go with TomTom and I already have a Bluetooth GPS receiver.
I've already got an O2 blue headset that works with my SonyEricsson T610 and I'll also be wanting to use that whilst in the car.
I have some questions that I hope some of you might be able to answer...
Is it possible to use both a bluetooth headset and bluetooth GPS at the same time?
Does the XDA IIi support the O2 blue as the SE T610 does, i.e. I press the button and say the contact I want to call and then the phone (home, mobile etc).?
Thanks for any help!
GWG
Hi
I have the Jabra BT 200 headset and the Leadtek 9537 GPS unit. They both work fine at the same time on my Xda IIi.
I was checking the GPS using Pocket Streets (have not re-installed Tom Tom yet but I do not envisage a problem)
The BT setup seems better on the IIi, there wasn't any messing around with the COM port settings like there was with the Xda II.
If you mean the fonix VoiceDial software that comes with it, then yes, it does work that way.
On the whole, I am pleased with the IIi (I had the II for a year), the camera is flakey but I can live with that.
MarkySan...
Thanks for that... Looks like it'll do what I'm after
I might then have to become a regular on these forums!
Cheers
GWG
Be warned, if you mean the o2 CLIP blue headset (made by iTech), I also have it and have been unable to get it working. (Why oh why can I not have the old stack from the xda2 as that worked perfectly with headset profile)
At one point I was briefly able to get it installed as a handsfree device but it then stopped working. Before I got rid of my xda2 I tried re-pairing the devices and it worked great first time. Other BT headsets I had access to worked fine.
Does anyone else have this headset and an xda2i? I've posted about this before but got absolutely no feedback whatsoever. Could anyone tell me if they're using a clip style headset (not the ones that hook round your ear) with the 2i...how much it cost and what make etc. I may have to bite the bullet, sell the o2 headset and buy another one.
Cheers
Anthony
2 BT devices simultaneously on XDA II
This is an interesting problem. I've got an XDA II, a leadtek BT gps receiver and a nokia handsfree BT carkit, plus Tom Tom.
I haven't got them all working at once yet and have been told there is a problem getting the handsfree to work anyway.
This was from a so called reputable high st mobile phone chain (who also said that only one BT device could be connected at once).
Any help or advice appreciated....
David
Well, I got my XDA IIi and very nice it is too.. this is my first foray into the world of PDA so I've nothing to compare too, so I'm very pleased
I've twinned it with my O2 blue headset and it works fine.
Also got TomTom navigator and a bluetooth GPS (although you still need a cable for power across the dashboard! Doh!).
They both work together, although there does seem to be some strangeness when they're both on:
1. The GPS sometimes drifts off... although this is based on a 15 minute drive into Town only
2. When on a call, the GPS signal seems to go completely and TomTom doesn't know where I am!
I do have a question about WiFi and MMS if anyone could help...
I have a WLAN at home, whihc the XDA IIi seems to connect to fine. However, when I am connected to it, I cannot send or receive MMS messages.. I'm sure it's something to do with this 'Internet' or 'Work' stuff, but this is all rather confusing. Has anyone written an idiots guide to all these strange settings?
Thanks!
ive used it all week on calls and even had the voice through my jabra 250 gps stayed on all the time it was fine the only problem i had was i couldnt get gprs without a softreset
Alix, are you saying you got the Tom Tom voice directions through the Jabra?
If so, I'm off to get the i!
Firstly is this forum ONLY for developers?
Because you will quickly discover that I am not a developer but a confused user and I was hoping that I could get some advice here?
Anyway I have a Bluetooth headset and was considering getting TomTomGo but also wondered if the headset and a BT GPSr would work together.
Also does anyone know if we will ever get voice dialling working on MobilePPC? I had a brief discussion with someone at Fonix who said that "Microsoft does not expose the necessary functions to third party software developers like Fonix".
Actually, now I've been using it for a while, it seems the reason Tom Tom drifted was because of a loss of signal.
Using the BT headset and Tom Tom with the BT GPS together is fine.
What is annoying though is the fact that the Phone App pops up in front of Tom Tom and doesn't go away when the call is complete.
Also, when touching the button on the headset to open the connection with the phone, it doesn't automatically start the Voice dial, you still have to reach across and fumble about looking for the button on the side. Has anyone got any ideas if it's possible?
That being said, the voice dial works OK.. not brilliant, and the voice that tells me what it thinks I've said is rather disappointing.. I want to keep telling it to 'Please speak more clearly' !
And I too can hear the Tom Tom voice prompts through the BT headset when the conection is open, although I prefer not to.
See my note re what the Fonix guy said above.
aRGybaRGy said:
Well, I got my XDA IIi and very nice it is too.. this is my first foray into the world of PDA so I've nothing to compare too, so I'm very pleased
I've twinned it with my O2 blue headset and it works fine.
Also got TomTom navigator and a bluetooth GPS (although you still need a cable for power across the dashboard! Doh!).
They both work together, although there does seem to be some strangeness when they're both on:
1. The GPS sometimes drifts off... although this is based on a 15 minute drive into Town only
2. When on a call, the GPS signal seems to go completely and TomTom doesn't know where I am!
I do have a question about WiFi and MMS if anyone could help...
I have a WLAN at home, whihc the XDA IIi seems to connect to fine. However, when I am connected to it, I cannot send or receive MMS messages.. I'm sure it's something to do with this 'Internet' or 'Work' stuff, but this is all rather confusing. Has anyone written an idiots guide to all these strange settings?
Thanks!
Click to expand...
Click to collapse
You can ONLY connect to MMS via the O2 GPRS network. Since your WIFI is outside their network, and is somebody elses, they won't let you login to their servers to send. All the carriers work this way - it's how they charge!
Hi,
I have a XDAIIi, Nokia car kit and TomTom 3 bluetooth. I have been trying to connect my phone to the car kit using bluetooth. Unfortunately it will only connect for phone calls. Does anyone knows how to permanently connect the phone using a different profile, so that I can listen to music and voice instruction of my TomTom using the car audio system? Any help is appreciated. Thanks
Reda
Hi,
I have a XDAIIi, Nokia car kit and TomTom 3 bluetooth. I have been trying to connect my phone to the car kit using bluetooth. Unfortunately it will only connect for phone calls. Does anyone knows how to permanently connect the phone using a different profile, so that I can listen to music and voice instruction of my TomTom using the car audio system? Any help is appreciated. Thanks
Reda
All I can help you with is that using my Jabra I press the call end button on the headset and the sound for my Tom Tom and MP3s comes through the headset.
Hope this helps.
Thanks mindracing. Do you know what services/profile your jabra return when you enquire it?
KR,
Reda
It shows up as Hands Free connection to Jabra 250.
Status just shows Jabra 250/Audio Gateway.
If you know where else to look just ask.
Thanks mindracing. yesterday I tried every possible combination but it seems I cannot stream my music and Tomtom instruction to the car kit.
Thanks anyway.
KR
Reda
just a note on this. I have had a jabra bt205 working with a QStarz BT-800 gps, it works ok BUT when i changed from the jabra to a stereo headset it workd ok too but only on the crap audio quality. I installed the cab file for A2DP support. now i have really good audio but as soon as i try to connect the gps the audio goes all choppy and eventualy cuts out.
It is of my limited opinion that you cant run A2DP and a bluetooth GPS because of the bandwidth (data transfer) available. Ive yet to see if i can get tomtom running with the wired gps and A2DP quality headset.
Think ill be goin back to wired headset for on the bike so i can have music, tomtom and calls... just need to find someone on here who has got a voice dial prog to run from the green call button on the wired headset.
GPS and BT Headset on XDA II
Anton.Valleyman said:
Does anyone else have this headset and an xda2i? I've posted about this before but got absolutely no feedback whatsoever. Could anyone tell me if they're using a clip style headset (not the ones that hook round your ear) with the 2i...how much it cost and what make etc. I may have to bite the bullet, sell the o2 headset and buy another one.
Cheers
Anthony
Click to expand...
Click to collapse
I use the MS BT stack with my Blue Ant BT earpiece and the Broadcom BT stack with a BTGPS74R receiver (aka Holox BT-321). They both work well individually, but not together. Another post made the point about com port issues ... well yes, I use the Broadcom BT Manager for this purpose, but the XDA II does not pair with the Blue Ant, even with TomTom 6 OFF. It shows up but is not really paired correctly.
Perhaps there is a simple answer ... if so, I am sure someone will advise me.
Hi there I'am new here.... seached the forum and google a lot but didn't find an answer...
Just flashed from XDALive 2.0 to Black 2.0, radio 1.38.00.10 and HardSPL v6 with help of the manual of mrvanx.
My problem with the rom of XDALive 2.0 was that TomTom 6 keep hanging serveral time. The headset (bluetooth build in CAR, peugeot 207) was working perfectly. After the upgrade to Black 2.0 the TomTom problem was solved , it works perfectly now. The only what came up was the bluetooth headset probleem. The connection is ok but I don't hear any sound??
Flashed back radio ROM to 1.35 no results...
Found something interesting...
When its not connect with the carkit, turn on bluetooth, dail a numbers and turn on the Speaker, it will eventually connect to the carkit automaticly (and I got sound thourgh the carkit!
When searching for bluetooth devices it will find the headset and the carkit goes into 'calling mode'. When dailing a contact directly after that the carkit will work. But the next try it will mute the radio but doesn't give any sound on the carkit.
When allready connected with bluetooth on the carkit it wont give any sound thourgh it.... strange.. Tried serveral other ROMS but they are giving me the same problem...
Widcomm BT Stack (http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72) also tried, didn't help... anyone some suggestions?
PS.: My old nokia still works, it can't be the carkit..
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
jcb_home said:
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
Click to expand...
Click to collapse
When searching for a new bluetooth device WM6 sees a headset and the connection is successful. The 'Set has headset' is availible and is set. The option Wireless Stereo isn't support I think, its not availible as an option.
When calling you can turn on/off your headset back to the phone. That works but there is still no sound on the headset.
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Same problem with HS850
simon_darley said:
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
Click to expand...
Click to collapse
I have exactly the same problem, and I didn't solved yet....but I've found this bypass:
When the phone rings I answer with the bluetooth handset and receive the beeb on connect call.....then I close the BT headset and as soon as I re-open it, I have the headset working.....I have to do this for every incoming or outgoing call.
My BT headset was working well with the black 1.2.
This is the only issue I've found in the black 2.0.....I think is the most stable and fast rom.
Bye prengo.
jcb_home said:
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Click to expand...
Click to collapse
My other Bluetooth devices are working fine. My bluetooth GPS receiver works just fine with TomTom... no issues there.
Just flashed back to XDA-Live (v0.20.1) and the headset works without any problem.
Only thing now is Tom Tom 6 hangs directly after the start of it. Anyone familiar with this issue?
thx
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
A common thread seems to be the HS850
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
cruzer said:
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
Click to expand...
Click to collapse
WMXL .20 is based on a beta WM6 build and Black 2.0 is built on an RTM build (non-beta)
With Moto HS850 too.
edwinyuen said:
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
Click to expand...
Click to collapse
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
mike6502 said:
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
Click to expand...
Click to collapse
It's great that you tracked this down so specifically. I guess this means for those of us with these issues, we have to avoid newer WM6 builds until someone looks into this.
idee2000 said:
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
Click to expand...
Click to collapse
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
rabdo said:
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
Click to expand...
Click to collapse
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
AdamsJourney said:
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
Click to expand...
Click to collapse
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Hi,
I am using radio rom 1.40.30 and Black 2.0.
I am using H700 BT headset
the problem i face are opposite from you all.
If i am already talking halfway and i flip the boom to continue talking with the BT headset...it won't work.
if i receive a call and I flip the boom while the phone rings, it is ok and i can even press the button on the h700 to answer the call.
Radio 1.40.30 seems to connect with the BT headset much faster.
last time when i was using my previous default factory rom, when i flip the boom while the phone is ringing, it will take ages to connect
why not u guys try radio rom 1.40.30 also
rabdo said:
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Click to expand...
Click to collapse
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
edwinyuen said:
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
Click to expand...
Click to collapse
Sorry, what I meant is that perhaps Cyberon Voice Commander is 'fixing' the issue on my system, rather than saying MS VC 1.6 was causing the problem. Next time I hard reset I will test my headset BEFORE installing cyberon software
Ok I'm still having this problem and this is what I have tried so far:
I downgraded to XDALive v0.10 and my BT worked, but no WiFi
So I upgraded to HardSPL v6, then installed the 1.40.30.00 Radio rom, and then went back to Cingular Black 2.0, WiFi back but no BT unless headset is activated after call is initiated.
Installed Cyberon Voice Commander, didn't effect anything, still no BT
Removed Cyberon Voice Commander and re-installed MS VC 1.6 installed all the hacks and still no audio in the headset.
So it looks like it is something in the ROM that is killing the BT functionality. Maybe because the XDALive is based on a beta WM6 and the Black is based on a full version?
Hi
I have a motoroal bluetooth HS 850 headset and it just does not work with any of the Offical Rom's used to work great with the cooked 1es. it pairs fine also give me the beep of connected and disconnect but no voice. the jabra ones work fine. any suggestions
using the official HTC Tytn ROM
pyk said:
Hi
I have a motoroal bluetooth HS 850 headset and it just does not work with any of the Offical Rom's used to work great with the cooked 1es. it pairs fine also give me the beep of connected and disconnect but no voice. the jabra ones work fine. any suggestions
using the official HTC Tytn ROM
Click to expand...
Click to collapse
on the "add devices" page, with the headset shown already attached, if you tap and hold your device's name, select "headset".
I have the same problem and up to now I didn't solve it, I have also an HS810 and it works perfectly.
Bye prengo
Same problem. It worked for me with earlier WM6 releases, but with the latest version, I've the same problem. the only solution I think is to buy a new one!
Same Problem Here. any body found any solution?
First a BIG thanks to all for the fantastic work being done on this site. I too have the same problem with my HS850 connecting fine but having no sound. Has anyone been able to solve this HS850 problem? I've tried for 3 days without success
mine works
hs850 works fine on vp3g 3.0. Pair and go, no hassle.
Atmis said:
Same problem. It worked for me with earlier WM6 releases, but with the latest version, I've the same problem. the only solution I think is to buy a new one!
Click to expand...
Click to collapse
I am using Dopod M700 with WM5. Working well with Motorola HS850. Then I flashed to Artemis Touch 2.1 WM6. The problem is when my call comes in, after I pressed on the answer button, no sound. Just a connected/disconnected sound. Doesn't even work with a2dp also.
Mines working with vp3G 3.62. Just make sure you check "handset" when u choose services.
I dont know what dialer you're using, but at least with the Kaiser dialer, a little headset icon appears in the dialer if you have it paired and the boom out. Might check that too.
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene
renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene
Click to expand...
Click to collapse
Same problem here... when upgrade to WM6 official the sound in the car is gone when dailing. Phone is connected but I'am unable to hear anything... everything goes into mute...
I'm stuck with the very same problem. I'll try JetWare and change some configs, but I fear it will not work.
If I have any news I'll post them.
Regards
P.D My car is a Citroen C4, and original Citroen bluetooth I think is a Parrot 3000 or 3100
I have the same problem.
Car kit BT Peugeot 207 and HTC 3300 with cooked room wm6.
I've installed jetware extension. I can hear sound in the first call but when I hang up the next call, the same problem .. no soud.
renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
e problem.
Please help.
Rene
Click to expand...
Click to collapse
Has anyone found a solution for this? I have found deactivating the bluetooth and reactivating on the call works.
I would hope someone finds a solution. What would be the downside of going back to WM5?? I cannot remember why I upgraded now.....
I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards
Alvinillo said:
I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards
Click to expand...
Click to collapse
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5
azreal1983 said:
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5
Click to expand...
Click to collapse
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards
Alvinillo said:
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards
Click to expand...
Click to collapse
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?
azreal1983 said:
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?
Click to expand...
Click to collapse
Nice!
But I find a problem, isn't your O2-XDA also known as Wallaby? I mean, if I'm right you are posting in the wrong forum or at least you should be advised not to install another PDA ROM on yours becouse you risk to brick it. We are posting at Artemis forum. Of course, Bluetooth problem seems not related to PDAs but WM6
On this forum there is info about how to unlock your PDA. Unfortunately I dont find any ROM for your device.
Regards
Same Problem
hi all,
207 FACTORY KIT / M650
I have the same problem, only the original ROM under WM5 work properly...
I Tried many bluetooth soft on several tips and WM6 release...
AJE , 1.5 / 6 /8 / 9 / 2.0 beta........
Now i am under B&B 5 (WM6.1) and the problem persist
I note that if i desactivate bluetooth stereo and fix sample rate to 44Khz, it looks to work a little better than before.
If i wait between 2 phone call (out), it works much.
If i answer to a phone call with the remote control it never works.
If i answer with green touch on the phone it work ALL the time.
Are we condamned to stay under WM5 !??
WM5 -> bluetooth but no CRM (does'n't want to work)
WM6 -> No bluetooth but CRM...
I choose to work on this but any result, since more than eight month...
HEEEEEEEEEEELLLP US AND SHAME ON PA**OT
PS: HTC and parrot pass a deal to increase compatibility of their product...
Since this time does anybody tel to parrot on this problem ?
Does newer HTC product originaly under WM6 work fine one factory kit (peugeot/citröen 207/C3...) because if no, i think parrot sucks ! they update firmware on all their product, but for product sells to peugeot or citroen -> NOTHING
Thx for the info. It's a pity that the problem persist on WM6.1
We are hooked to WM5 and to my eyes, the Artemis and PocketPCs look older than ever.
At the end, I think it is a Microsoft problem. PSA Bluetooth CarKit works flawlessly with WM5 so Microsoft changed something to the Bluetooth stack on WM6. Shame on them.
I'll wait to WM7, but I don't have too much expectations.
Regards
Some hotfixes are available from HTC regarding bluetooh, only not for the Hermes. damm.
Anyone tried one of these already? Currently still not able to updrade to WM6.1
http://forum.xda-developers.com/showthread.php?t=385128
And one recently for the Diamond..:
6/16/2008
Hot fix for resolving Bluetooth headset sound problem that occurs when reconnecting with HTC Touch Cruise
If you are using the Bluetooth headset, “Jabra JX10”, “Jabra BT500” or “Samsung WEP 150”, and the headset becomes out of range or undetected by the HTC Touch Cruise, in certain circumstances, you may be unable to hear any sound from the headset even after it has reconnected successfully with HTC Touch Cruise. Please install this hot fix to improve the connection when using the above-mentioned Bluetooth headsets.
Hey guys,
i was wondering if anyone was facing this problem... i have the Alpine 103BT in my car which has an inbuilt parrot bluetooth system. I have noticed that when someone calls me it shows up on the lcd on the headunit then immediately drops the call! it shows up as a missed call on my tp2... but when i call using this bluetooth system then it works like a charm!
Any idea what i can do to change this? Is there a setting i have inadvertently changed?
I would really appreciate this because this call dropping really defeats the point of hands free!
Elfangor
I've got the same problem.
Just look a few posts down the list and you'll notice my 'cry for help'.
So far though, nobody's come to the rescue.
I've been reading that our phones have a unique BT-implementation, so it could be down to a bug in that area. If more people show up having similar issue, we might know.
Until then: fingers crossed and hope for sombody to post a solution.
Great! its not just me then! I hope it gets sorted! it gets on your nerves after awhile!
That's putting it mildly.
This sucks big-time: when on a business-call you definitely don't want your headset to die in you. During any conversation, really, but blasting along the motorway it's the last thing you need.
I also have an alpine 103 bt and an htc touch(elf) with onyx rom on it.
my problem is that when i make a call either from the head unit or the phone on the head unit it stops the music, displays CALLING and then after 3 seconds it displays ------------- , resumes the music, but the phone doesnt hang up. It continues the call, shows that is stil connected but you cant hear anything.
this is really frastrating as it does this sort of thing randomly and not always.
any thoughts?
Your symptoms sound a bit different from ours so it could be a totally different problem.
We might need to be paitient until one of the experts has a simiral experience and dived into the software.
Until then, I'm baffled.
eidikos said:
I also have an alpine 103 bt and an htc touch(elf) with onyx rom on it.
my problem is that when i make a call either from the head unit or the phone on the head unit it stops the music, displays CALLING and then after 3 seconds it displays ------------- , resumes the music, but the phone doesnt hang up. It continues the call, shows that is stil connected but you cant hear anything.
this is really frastrating as it does this sort of thing randomly and not always.
any thoughts?
Click to expand...
Click to collapse
Come to think of it... i have a similar problem.. when i get an incoming call it stops the music and registers a call and just a few second later..i get the --------------, and then the music comes back...by the time i fish my phone out of the pocket ive got a missed call! havnt noticed any problems when im calling though.
i tried repairing the phone to the unit but same thing! not sure what else i could do
Similar problem (I think)
Cant get a working setup in my car kit. I have a Jaguar XF SC with bluetooth handsfree...The TP2 (TMO US) pairs and docks fine, but doesnt work well. Incoming calls dont seem to be recognized, and outbound calls will dial and communicate, but wont hangup. When I hang up from the TP2, the car kit still thinks its connected and mutes the radio until i forcebly disconnect from TP2...
arg...
I've got exactly the same problem as the original poster. Mine's a vodafone TP2 with the standard vodafone rom. I've got the Alpine 104BTi. I can make outgoing calls ok but as has been described any incoming call will show the caller ID for about 1 ring and then it hangs up the call.
I've got a Jabra BT500 which works perfectly. I am wondering whether it may be the actual firmware in the Alpine device. If you look at the phone compatibility list on the Alpine website the TP2 is not listed. It worked fine with my Kaiser and this is listed as compatible.
I emailed their tech support and they said they are waiting for their customized version of the firmware from Parrot to be updated, possibly around September. I've noticed that for the Parrot standalone devices these all list the TouchPro2 as compatible, so maybe this will be fixed.
They did mention that the firmware update may only be available through the dealers. I'll keep an eye on their website. My current firmware version is 320.
I've read some other threads somewhere that people with the vodafone rom describe having problems with bluetooth that are fixed after flashing with a different rom so may turn out to be that.
Infuriating though.
It seems to be the poor implementation of the new BT stack
I have had similar problems to those described above, my Peugeot van has inbuilt BT (uses Parrot in implementation) which just misbehaves unbelievably including hanging up the current call if a new one comes in on call waiting, phonebook access is rediculously slow and buggy.
My Jabra BT8010 disconnects at random
My Jawbone disconnects very occasionally
The stack is full of bugs and HTC must know it - I reported it on their support system and firstly fobbed off, then they said they would look into it, then the log was auto closed - very convenient way to show they are meeting targets in resolving issues.
It is poor, poor and more poor. The new WIDCOMM stack looks great but doesnt really work.
Very poor for a flagship handset and they should sort something out
I went to an Alpine delearship who suggested what ukdoc was trying to do.. basically firmware update! Are you using a different Alpine website? Because the one i go to says coming soon on the page where software updates are supposed to be. I culdnt find any connection with parrot and alpine on the parrot website!
Basically what im asking is how are you going to be getting the firmware update and could you direct me towards it!
Many thanks Mate
Elfangor
rlsxda said:
Cant get a working setup in my car kit. I have a Jaguar XF SC with bluetooth handsfree...The TP2 (TMO US) pairs and docks fine, but doesnt work well. Incoming calls dont seem to be recognized, and outbound calls will dial and communicate, but wont hangup. When I hang up from the TP2, the car kit still thinks its connected and mutes the radio until i forcebly disconnect from TP2...
arg...
Click to expand...
Click to collapse
FYI, I just upgraded the radio to "4.46.25.24 - HTC" (see http://forum.xda-developers.com/showthread.php?t=549939) and the handsfree seems better...not sure it's perfect, but it does answer and hangup now...
Upgrade Alpine CDE-104BTi firmware from 320 to 360
I have just updated the firmware in my CDE-104BTi radio to version 360
http://www.alpine-electronics.co.uk/support/bluetooth-update-software.html
This has fixed the problem of not being able to recieve incomming calls on my HTC Touch Pro 2.
dsalter said:
I have just updated the firmware in my CDE-104BTi radio to version 360
http://www.alpine-electronics.co.uk/support/bluetooth-update-software.html
This has fixed the problem of not being able to recieve incomming calls on my HTC Touch Pro 2.
Click to expand...
Click to collapse
I've just done likewise, and can also receive incoming calls at last!
Hi
I just tried updating the BT in my Alpine 104bti. The laptop connects to the headunit but the update tool don't find the connection, I've tried disabling the antivirus etc. But it don't see the connection but the connection is displayed on the laptop.
Any Ideas whats wrong ?
Cheers Gomez...
SOLVED
Tried again using a laptop with Xp on worked first time, Seems Windows 7 was causing issues.