The latest update of Destinator 6 (v6.1.1.40010) NOT WORKS with our device..
The message GPS Antenna Connected and after 1 second GPS Antenna Not found appears again and again at the GPS settings screen...
With previous versions of Destinator 6 the GPS of Artemis working without problems with this version (given by Greek NGI team to their users) the GPS of Artemis not works (all the other GPS devices works great)!
I try to overwrite the file GPSLib.dll with the previus version GPSLib.dll but the problem exists (when the speed meter of my car shows over 100 mph or 120km/h)
Any solution?
My last thought is to change NMEA to Sirf could you suggest me any operational tool for this?
Thanks in advance..
Related
I have a fortuna bluetooth gps and i have rom vrsion 1.72 on my xda2 and i cannot get it to work properly with tomtom. I allso have the latest version in tomtom gps and i have the bluetooth tools by towa can anyone please help.
When you bonded the gps did you choose "serial profile". What settings are you using in tomtom? Which fortuna gps is it, on my xda2 the gpsmart needs no bt tools and neither does the gr230.
it is fotuna clipon. it bonds ok, it asks about serial port but dose not give a port number. in tomtom i select tomtom wirless gps and bluetooth gps.
thanks
Starman:
DO NOT use BT Tools (not needed with rom 1.72)
Bond the BT GPS, say yes to create com port.
In TomTom GPS select
- NMEA xxxx Bluetooth and
- COM5 or (better!) Bluetooth GPS
- tick blue-ish box
Should work right away
Remember you only get fixes with a clear view of the sky!!
I would like to know if:
- You can tick the blue-ish box with Bluetooth GPS (instead of COM5) selected or not
- What the origin of your 1.72 ROM is: iMate, Qtek, T-Mobile beta
the rom was posted by wax hit is the himalayen rom i tryed all the thigs that you said and it is still the same.
could you be more specific?
There is no user 'wax' nor has anyone with a username like that posted a message with RUU172* in it . . .
BTW I suppose its not enough to uninstall BT Tools, to be sure its gone do a hard-reset
I have the Fortuna BTCliponGPS unit with an XDA2 but only with the 1.60.00 WWE ROM from O2.
Do EXACTLY what edsub said:
1. Go to Bluetooth Settings (in Settings) and make sure that Bluetooth Serial Port setup is enabled for both Inbound (COM4) and Outbound (COM5)
2. Delete any ClipOn-BTGPS devices showing on in your Bluetooth device list and reconnect. Don't forget that the Fortuna device uses 0000 (4x zeros) as its passkey and that you must allow it to create a COM port when it asks.
3) I presume you are using TomTom Navigator with this? Make sure that you have downloaded and installed the very latest GPS software AND the TomTom Navigator application update.
4) Stand outside in the pouring rain waiting for the blasted GPS unit to lock onto a satellite.
will this work w/ TT3.01?
Do we have to update to TomTom 3.03 + GPS 3.03, or can the Fortuna Clip & XDA II work with version 3.01 +gps 3.01?
No you dont have to update the drivers etc, but the latest version runs alot faster.
Im running an xda2 tt3 and bt fortuna clipon and bttools, ROM 1.66.00. I have NO problems at all with this configuration.
Regards
The Pilgrim
I use Dconnex DC-230 bluetooth with my XDAII ROM 1.72, and Tomtom 2.
I had to upgrade TOMtom to 2.24 and GPS to 3.03, the in tomtom i chose SIRF BT and Bluetooth GPS. and as edsub said you nedd to check the blueish box, but don't stand in the rain waiting for signal, you will get a message saying no signal found??.
BTW when bonding my GPS I opted for NO serial ports.
anybody knows how to keep the GPS bonded all the time (other than leaving it on and next to the XDA all the time)
Hi ppl,
i recently recieved a kit from Navigon, Navigon Mobile 4 with a BT GPS mouse.
I got the mouse bonded as a serial slave on com 5 & 6 and seems to be recognise by the software because i recieve at least the TMC messages.
but i got no GPS signal.
does anybody ever tryed this GPS on a qtek 9090 ?
is there a specific tool i need to install on my pda for the BT manager (options are quite poor in the BT manager)
any ideas ?
thks
Navigon needs VTG data from the GPS to work. If you have a GPS powered by a SIRF chipset it is easy : go to www.gpspassion.com and download a freeware to do the job.
i dont really know about the gps reciever furnished by navigon, there are no information about the hadware in the package, or user guide
If you have the Navigon GPS and not a non branded Navigon GPS, the issue is not the VTG...
i have the navigon BT GPS + TMC, the tmc works i recieve the signal in the software correctly, but i do not recieve any gps signal
i guess it comes from the com ports, but i really do not know how to solve that problem
i found the response, Qtek 9090 has a wildcomm BT modem so it requieres a patch available at the support page of navidon.de web site
I have just bought a Generic BlueTooth GPS for use with TomTom 5. I successfully paired the GPS with the XDA IIs, then the problem came of getting tomtom to find it. It will not see it as a Bluetooth GPS so I have to select "Other Cable NMEA GPS", set the baud rate to 38400 and set it to COM 6.
This will work for approx 40mins before TomTom5 crashes. It then takes a soft reboot to get it working again.
Is anyone else having similar problems?
I might have to go back to TomTom3.
My device info:
ROM Version: 1.40.00 WWE (i-mate ROM)
Radio Version: 1.12.00
ExtROM Version: 1.40.176 WWE
Well after struggling with TomTom 5 for the last time, I'm going back to TomTom 3. I believe there is a patch out there to get the TomTom 5 maps to work with 3.
I use my pda2k with tomtom 5.1 and both the Tomtom 3 bluetooth gps and a BT-338 Globalsat GPS Bluetooth Receiver .
In order to get it to work, I have to switch on bluetooth and connect to the gps manually, and then start Tomtom. Occaisonally the gps wont connect or Tomtom just wont detect the gps. I then to a soft reset, try again and it works.
I have not had to do anything clever with the Tomtom settings, in fact I think I just use the Tomtom bluetooth setting for both receivers.
If someone phones me whilst using Tomtom, after the call, tomtom does not detect the gps and I have to quit and restart.
Well I'm back on TomTom 3 now, it's lovely and stable, the BT connect first time everytime and I can make/accept calls on my BT headset.
Perfect!
If only the boys at TomTom had put some effort in and tested 5 before releasing it.
Hello Porkspeare,
can you tell me which version of TomTom 3 you are using and what bluetooth stack? I have the problem that I cannot use my BT headset Bluetrek G2 after installing TomTom 3.01 , even though before the TomTom install it works fine. Would be interesting to know what combination works on your machine.
Thanks
ROM Version: 1.40.00 WWE (i-mate ROM)
BlueTooth Version: 1.0.0 Build 3900
TomTom Version: 3.03 (427)
BT Headset Ver: Blue Trek G2
Hope this helps.
Vavavoom, are you using the very latest bluetooth driver from tomtom for version 3..
tomtom 5 hangs
I have same problem...
The problem goes away if you turn off all POIs
some say copying poi.dat from tomtom3 maps will solve it..
also seen something about a vga registry hack, havent tried any - i have just turned off poi until some solution pops up...
Jan
Hi cruising-thru,
I don't know what you mean by "bluetooth driver for TomTom3" - can you get a seperate update for just the bluetooth driver? The only update I found was for the Navigator (3.07) and GPS (3.07). Unfortunately I can only install the GPS update. If I try to install a Navigator update higher than 3.01 TomTom tells me it cannot find a map even though it's installed and activated. My current combination is therefore Navigator 3.01 and GPS 3.07.
If there is a sperate BT update could you please tell me where to find it?
Thanx
Thanx porkspeare,
I have the same combination except I only managed to install TomTom up to version 3.01. Maybe if I somehow manage to update to 3.03 it solves my problem. Will keep trying
Cheers
Hello,
I am wondering if AX3L_OS_v3.1.2_LITE_fixed.rar is a GPS enabled rom. I cannot seem to connect using TomTom version 6.010. If it matters, my radio version is 1.50.08.11 and I am in the US.
TomTom Settings :
GPS receiver : Other NMEA Receiver
baud rate : 9600
GPS to com9
Thank you in advance!
Palermitano said:
Hello,
I am wondering if AX3L_OS_v3.1.2_LITE_fixed.rar is a GPS enabled rom. I cannot seem to connect using TomTom version 6.010. If it matters, my radio version is 1.50.08.11 and I am in the US.
TomTom Settings :
GPS receiver : Other NMEA Receiver
baud rate : 9600
GPS to com9
Thank you in advance!
Click to expand...
Click to collapse
But why don't ask this in the AX3L ROM Thread???
Don't you think AX3L will help you better?
Oh Yea it works!
Palermitano
AX3L 's AX3L_OS_v3.1.2_LITE_fixed.rar works the GPS great! I have less than 50% memory usage before kicking off the TomTom 6. It's been the fasted operation I have seen on the Trinity.
I'm using the TomTom 6 from HTC and maps from everywhere. It's a lot more stable than WM5 and I'm seeing a lot less memory card corruption. (4gig SD from TopRam)
What you might try is VITO Navigator II v1.3 to trouble shoot the problem. This little app can auto find the GPS module in the Trinity and give a display of all viewable sat's in about 5 seconds. There is no enable or disable needed, that app will turn on the gps and start working. It can even show you the raw data stream coming down.
TomTom has too much over head to trouble shoot with.
Been playing with GPS units for 8 years now, Palm3 to Sony N70 to HP 5450 and now Trinity.
hi i got tom tom 6.0.20 for mda compact 3 from t-mobile now i have windows mobile 6.
but the gps is not working.
i have gps settings to com4 on the first tab on the second none automatic on the third tab.
and in tomtom i got internal gps selected.
please help.
greats antonius
Edit: got 1 signal now but still no connection and map only 17 is gray and standing out.
Try newer Version of TomTom. The last Version working for the Artemis is TomTom 6.032.8351. On the HTC Support Page you can find TomTom 6.032.8320 under the P3600 Section.
Regards
Jabami
works for me, try 'other nmea receiver', 9600 baud rate, and com4
hope it helps
Ive used all sorts of roms including the now official Tmob uk one and never had probs. I always use tomtom 6.0.30 from HTC's website. I use an external bluetooth GPS (as its wired into the car) and also the Build in GPS all without problems.
When in doubt, get the stylus out (and had reset)