Just got my artemis 2 days ago. I ugraded from an Qtek s100 (so its my first time with WM5) so sorry if there are stupid problems but i already tried a lot of things.
1st – When backlight is turned of by itself for bat. saving it wont turn on again with a screen tap. And there is any option for activating that way.
2nd – Contacts saved in sim also apear in contacts. In WM2003 they only appeard if copied to contacts. I like to save a copy of my contacts in sim but its anoying have duplicated contacts
3rd – I tried everything but seems that i dont find any voice command working a part from that lousy voice deal that requires training . I had voice command 1.5 from Microsot but always close itself for an error of somekind. I tried also the version 1.6 of cyberion here in the forum modified for dopor and wizard but no luck too. setting and instalation are well but when i call the app it says "this device is not suported"
my ppc is in greek but i will try to help you.
1. go settings-system-energyor batery-menu-screen light-battery
and check the options you want i suggest to you better bat life to close the screen light after a minute or two.the ppc opens again from side button on/off
2.open with a registry editor
HKCU\ControlPanel\Phone
create DWORD: ShowSim
Value: 0 = hide
1 = show
3. i do not know yet
Thanks for the help. But i dont know why the option to turn on after button press or style tap doesnt exist on my htc. But after i changed the time from 2 to one.Dont know why but came back to normal and now is working fine. Now is just the voice command that makes a lot of diference when driving
Any clue how i can put Microsoft voice comand 1.5 or cyberon voice commander working. I know it works because i intaled a version of cyberon 1.6 worked fine but is chinese ...
MS voice command
I have the same problem with voice command. I installed it onto the device OK but as soon as my PPC boots or when i try to run MS VC I get the error "Voice command has encountered a problem. Restart Voice Command and try again."
I had it on my universal and will need it more now that I've not got a hardware keyboard to type the names in.
Any help would be greatly appreciated.
thanks
I found here in the forum de version of Cyberon Voice Commander that is similar to microsoft voice command. The version modified for Dopod works great. "Cyberon Coice Command 1.6 cvc-ppc-ame-dopod-601062.cab" works.
Related
I saw a review of ETEN M600 in a (italian) magazine: there was a photo showing the wm5-integrated voice command...the problem is: why does my qtek 9000 only have voice speed dial (to call contacts or launch apps) and the lower-class m600 has a full featured program, that can also - as clearly shown in the photo that struck me - read sms (!!), call telephone numbers even if not stored in the contacts database, and many many more interesting actions??
is there a way to extract it and use it on Universal?? I'd really like to have sms read to me (useful while driving), and the radio/bt/wifi turned on and off without having to open it, turn it on and click click click... it takes no more than 10 seconds but sometimes it's annoying!!
any hints about that?? any suggestion??
Isn't this just Voice Command? Why not just install Voice Command to allow you to execute commands like radio on/off etc?
V
MS voice command 1.5 you mean?? but as far as I remember (It's been a long time since I last used it on my old PDA) it can't read sms or so....
It can if you know how :wink:
However, out of the box I don't know if it can.
V
I don't understand...you mean that there's a way to have it reading out loud all my text messages?? oh man that would be great!! are you talking seriously or is it just a technical fantasy?? tell me I'm so curious!!!
vijay555 said:
It can if you know how :wink:
However, out of the box I don't know if it can.
V
Click to expand...
Click to collapse
Hmm! ;-)
Vijay555, do you mean there's a way to discover some more hidden capabilities in Microsoft Voice Command 1.5 UK?
I really would love to have some more functions in this. Don't see any upgrades coming at moment.
I don't know about hidden capabilities in Voice Command itself.
But there are other ways to make the Phone speak and there are a couple of competing speech engines out there.
I'm currently working on a speech program, VJLoquitur, using Flite and some other stuff.
Anyone going to the Modaco meeting this Saturday? I'll be showing it off there, hopefully.
V
Hello,
I recently bought the g-smart i128.
The device comes with the Cyberon Voice Commander which i found very complicate to use.
I have install the Cyberon Voice Dial on top.
The funny part is the using my SE HBH-PV705 BT handset, when i press the connect button it just launches the commander or (after tweaking) its just connects the audio BT profile nad the ppc displays the dial pad.
I need the Cyberon Voice Dial to be launched by pressing the BT key NOT the Cyberon Voice Commander.
Running the sddialer.exe from the g-smart, works. Launching it from the BT doesn't.
Can anyone help ?
Thanks
Cyberon Voice Dial Instead of Cyberon Voice Commander
Hi,
Try the following. Rename the voice dial file (I don´t remenber the name, I think is Sddialer.exe or something like that) to voicecommander.exe. There will be an pop up alert saying that you are goint to overwrite a rom file, it doesn´matter you overwrite it.
Now it will be work.
Good luck
Fernando
s200 said:
Hi,
Try the following. Rename the voice dial file (I don´t remenber the name, I think is Sddialer.exe or something like that) to voicecommander.exe. There will be an pop up alert saying that you are goint to overwrite a rom file, it doesn´matter you overwrite it.
Now it will be work.
Good luck
Fernando
Click to expand...
Click to collapse
Hello Fernando - I have tried that, but then, when i press my connect button on the BT, it opens the audio channel with the phone and it displays the dial pad.
I installed MS Voice Dialling and it works better. still i would prefer the Cyberon Voice dial...
just wondering
I know that When I installed MS Voice Command I had to reassign the button under settings. Once I reassigned the button from Voice Dialer to Voice Command it worked fine. Did you try that?
wm1 said:
I know that When I installed MS Voice Command I had to reassign the button under settings. Once I reassigned the button from Voice Dialer to Voice Command it worked fine. Did you try that?
Click to expand...
Click to collapse
The MS Voice dial works fine after deleting the sddemon.exe from STARTUP directory.
My wish is to have the Cyberon Voice Dial to work and not MS Voice Dial or the Cyberon Voice Comander.
Any other suggestions please ?
Why do you prefer the Cyberon voice dial?
Thanks
ebadger said:
Why do you prefer the Cyberon voice dial?
Thanks
Click to expand...
Click to collapse
I dont, but i cant make the Voice Commander to work. I wish i had Voice Dialing working, but its not...
I do prefer Voice Dialer to Voice Commander. It is just easy and works and dials who i ask it to (I don't care that I have to record my own tags) VCmd, MS Voice Command et al are all simply too complex and get it wrong too often in the car, which is where I need voice dialling!!!!
Unfortunately I have lost Voice Dialer since flashing my orange m600 with a dopod ROM, so can you tell me where you got the install program as I cant find it
Thanks
flykthewiz said:
I do prefer Voice Dialer to Voice Commander. It is just easy and works and dials who i ask it to (I don't care that I have to record my own tags) VCmd, MS Voice Command et al are all simply too complex and get it wrong too often in the car, which is where I need voice dialling!!!!
Unfortunately I have lost Voice Dialer since flashing my orange m600 with a dopod ROM, so can you tell me where you got the install program as I cant find it
Thanks
Click to expand...
Click to collapse
PM me your email and i'll send it!
geovass said:
PM me your email and i'll send it!
Click to expand...
Click to collapse
done as requested
voice dialer vs. voice commander
when I upgraded my apache to wm6 I lost voice dialer. Found voice commander but it gets it wrong more than right, even with voice tags added. never had a problem with voice dialer, so when I saw a cab for voice dialer, I installed. weird thing, though, is while voice dialer showed up in the settings and I could add tags to my contacts, I could not find the program to actually use it. Can anyone help?!
WM6 Voice Command 1.6
Voice Command is a very powerful program that will allow you to control your WM6 Excalibur with your voice.
Hands-free phone
Dial your phone by voice using the phone number
Contact lookup
View contacts with a voice command
Have the subject, time, and location of upcoming appointments read to you
Media player
Program starter
Device Status
Enable Voice Command
Start > Voice Command
Voice Enabled > Yes
Announcement Routing > Bluetooth if Available
This setting will allow Voice Command to use the Excalibur phone speaker to respond to vocal commands, if you don't have a bluetooth headset connected.
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the soft reset, press and hold the home key. This is the default Record Application Button which activates Voice Command. When you hear the beep say, "Help". Voice command will then guide you through the available voice commands.
IMPORTANT: Do not talk directly into the microphone. Hold the phone 4 inches/100mm from your voice. The response from Voice Command will take a few seconds.
A Voice Command tutorial from Microsoft is here.
Enable Voice Command with a Bluetooth Headset
With the current beta release of WM6, you need to modify the following registry settings to use your bluetooth headset with this feature.
NOTE: Your Excalibur has to be application unlocked to make modifications to the registry.
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule
The string value needs to be changed from "OEMAGW.dll" to "\Windows\vcbthag.dll".
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the phone reboots, your bluetooth headset will now be able to use Voice Command by pressing the button on your headset. Wait for the beep, then speak the command.
Viel Spaß mit Voice Command,
jromney
QVGA Landscape WM6 Compatibile Home Screens
thanks you
Most of time, Voice Command works fine, but those times it doesn't more than make up for the times that it does
Great job with this, it's working pretty good for me with my BT headset. Very nice!!!!
add voice tag feature is gone.
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Try a hard reset?
dluser said:
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Click to expand...
Click to collapse
Try a hard reset. That should restore it to factory settings. You'll have to input your ActiveSync settings again and install any other apps you want.
I agree. I have VC1.6 on my WM6 and I am really dissapointed with my experience. I watched that very detailed video tour of the program before it was released and it made it seem like it cooked dinner, shoveled the snow, and aced all my exams. However, I find myself constantly arguing with the stupid lady voice about her being deaf, not being able to pronounce/recognize the right way my friends are called, and just being plain dumb. I thought it would be really useful while driving, but 80% of the time I give up and press the keys away to get what I want.
No thanks!
I Love Miss Botron's Voice, Works like a Charm!
To jromney: well said, thanks guy, it works like a charm on my Dash! Now I love VC, like you said, it a powerful application. I have Miss. Botron's voice volume turned up to the max. The Girl is alright with me!(lol) We talk all the time!(lol) By the way jromney, you got the best VC bluetooth headset fix on the planet, so easy a caveman can do it! (lol) Works perfect with my Plantronics 590A bluetooth headset!
Nice Software + voice speed dial
For those of you that have problems dialing strange non English names I fod a good way of dialing. In my HTC p3300 I have a software called Voice speed dial. With it I can make a voice tags forall my contacts. Then on my BT a2dp I press the utton for voice dialing, then I say "Start Voice Speed Dial" then it turnes on the voice speed dial and I say the name "name" and then the voice speed dial recognizes it on the spot.
I works very nice.
Would anyone like to share the file for voice command or split the cost on the purchase from handango. I do miss that feature of having messages read aloud and commanding programs via voice.
???
i am pretty new to the whole voice command thing and i know that it CAN read my text message out loud, i just don't know HOW to make it happen, please help me
thanks in advance
Sick of Microsoft voice commander 1.6 problems on wm6??
Try this great alternative "Vito Voice2Go v1.51"
Just search it in ed2k or p2p search engine by:" Vito Technology Vito Voice2Go v1.51 Xscale Wm2003 Wm5 Wm6 Cracked-Sympda.zip"
Don’t forget to disable the "mwc 1.6" if you installed it earlier
And make sure you change the voice command button to "voice2go" program
Didn’t try it yet with Bluetooth headset
All the best Miteranix
wm6 voice command
i just installed this on my dash(updated to 1.33 htc rom) my home button is using to voice tag crap does anyone know how to fix it to voice command... everything about the program works it just doesnt let me use the home key to activate can anyone help?
thanks a bunch!
I'm not sure if this is the right place to post this since the WMB V2.0 is no longer supported if this is wrong MODS please delete.
I can not get into the setting to train it. It worked fine with WMB V1.2 and for a test I flashed LSVW 3/26 and it worked fine with that. I can run the app normaly but since no number or apps are trained with my voice i can use the program. Everytime i hit the setting button it just shuts down and thats it. Anyone have any hints to this?
I have the same issue with my TyTN, cannot access the settings menu inside voice dialer, it just shuts down after telling me there are no trained voice tags.
Hello,
i apologize should i have missed an existing thread on my problem. I found nothing.
Problem is: Using an Artemis (T-Mobile MDA III) Windows mobile 5.0 and Voice Command 1.6. VC deos not work properly on Voice controlled dialing neither from "Contacts" nor by voicing numbers to dial, one by one.
It worked well on my previous MDAII (Magician), WM3 and VC 1.5. I wouldn't like to miss it.
Calling up programs and info's (time, date, memory usage, rind-mode) etc. works well.
Thx in advance for any help.
Wyzard
Wyzard said:
Hello,
i apologize should i have missed an existing thread on my problem. I found nothing.
Problem is: Using an Artemis (T-Mobile MDA III) Windows mobile 5.0 and Voice Command 1.6. VC deos not work properly on Voice controlled dialing neither from "Contacts" nor by voicing numbers to dial, one by one.
It worked well on my previous MDAII (Magician), WM3 and VC 1.5. I wouldn't like to miss it.
Calling up programs and info's (time, date, memory usage, rind-mode) etc. works well.
Thx in advance for any help.
Wyzard
Click to expand...
Click to collapse
I also use voice Dialing on my MDACIII with WM5, but i just use the standard software, works ok with that. it might be a conflict between Voice Command 1.6 and the standard software.
Once you have activated a button for Voice Command it should work fine, mine does.
Try a reinstall, and make sure you install to the device memory, not a memory card.