Hello,
i apologize should i have missed an existing thread on my problem. I found nothing.
Problem is: Using an Artemis (T-Mobile MDA III) Windows mobile 5.0 and Voice Command 1.6. VC deos not work properly on Voice controlled dialing neither from "Contacts" nor by voicing numbers to dial, one by one.
It worked well on my previous MDAII (Magician), WM3 and VC 1.5. I wouldn't like to miss it.
Calling up programs and info's (time, date, memory usage, rind-mode) etc. works well.
Thx in advance for any help.
Wyzard
Wyzard said:
Hello,
i apologize should i have missed an existing thread on my problem. I found nothing.
Problem is: Using an Artemis (T-Mobile MDA III) Windows mobile 5.0 and Voice Command 1.6. VC deos not work properly on Voice controlled dialing neither from "Contacts" nor by voicing numbers to dial, one by one.
It worked well on my previous MDAII (Magician), WM3 and VC 1.5. I wouldn't like to miss it.
Calling up programs and info's (time, date, memory usage, rind-mode) etc. works well.
Thx in advance for any help.
Wyzard
Click to expand...
Click to collapse
I also use voice Dialing on my MDACIII with WM5, but i just use the standard software, works ok with that. it might be a conflict between Voice Command 1.6 and the standard software.
Once you have activated a button for Voice Command it should work fine, mine does.
Try a reinstall, and make sure you install to the device memory, not a memory card.
Related
Just got my artemis 2 days ago. I ugraded from an Qtek s100 (so its my first time with WM5) so sorry if there are stupid problems but i already tried a lot of things.
1st – When backlight is turned of by itself for bat. saving it wont turn on again with a screen tap. And there is any option for activating that way.
2nd – Contacts saved in sim also apear in contacts. In WM2003 they only appeard if copied to contacts. I like to save a copy of my contacts in sim but its anoying have duplicated contacts
3rd – I tried everything but seems that i dont find any voice command working a part from that lousy voice deal that requires training . I had voice command 1.5 from Microsot but always close itself for an error of somekind. I tried also the version 1.6 of cyberion here in the forum modified for dopor and wizard but no luck too. setting and instalation are well but when i call the app it says "this device is not suported"
my ppc is in greek but i will try to help you.
1. go settings-system-energyor batery-menu-screen light-battery
and check the options you want i suggest to you better bat life to close the screen light after a minute or two.the ppc opens again from side button on/off
2.open with a registry editor
HKCU\ControlPanel\Phone
create DWORD: ShowSim
Value: 0 = hide
1 = show
3. i do not know yet
Thanks for the help. But i dont know why the option to turn on after button press or style tap doesnt exist on my htc. But after i changed the time from 2 to one.Dont know why but came back to normal and now is working fine. Now is just the voice command that makes a lot of diference when driving
Any clue how i can put Microsoft voice comand 1.5 or cyberon voice commander working. I know it works because i intaled a version of cyberon 1.6 worked fine but is chinese ...
MS voice command
I have the same problem with voice command. I installed it onto the device OK but as soon as my PPC boots or when i try to run MS VC I get the error "Voice command has encountered a problem. Restart Voice Command and try again."
I had it on my universal and will need it more now that I've not got a hardware keyboard to type the names in.
Any help would be greatly appreciated.
thanks
I found here in the forum de version of Cyberon Voice Commander that is similar to microsoft voice command. The version modified for Dopod works great. "Cyberon Coice Command 1.6 cvc-ppc-ame-dopod-601062.cab" works.
Hello,
I recently bought the g-smart i128.
The device comes with the Cyberon Voice Commander which i found very complicate to use.
I have install the Cyberon Voice Dial on top.
The funny part is the using my SE HBH-PV705 BT handset, when i press the connect button it just launches the commander or (after tweaking) its just connects the audio BT profile nad the ppc displays the dial pad.
I need the Cyberon Voice Dial to be launched by pressing the BT key NOT the Cyberon Voice Commander.
Running the sddialer.exe from the g-smart, works. Launching it from the BT doesn't.
Can anyone help ?
Thanks
Cyberon Voice Dial Instead of Cyberon Voice Commander
Hi,
Try the following. Rename the voice dial file (I don´t remenber the name, I think is Sddialer.exe or something like that) to voicecommander.exe. There will be an pop up alert saying that you are goint to overwrite a rom file, it doesn´matter you overwrite it.
Now it will be work.
Good luck
Fernando
s200 said:
Hi,
Try the following. Rename the voice dial file (I don´t remenber the name, I think is Sddialer.exe or something like that) to voicecommander.exe. There will be an pop up alert saying that you are goint to overwrite a rom file, it doesn´matter you overwrite it.
Now it will be work.
Good luck
Fernando
Click to expand...
Click to collapse
Hello Fernando - I have tried that, but then, when i press my connect button on the BT, it opens the audio channel with the phone and it displays the dial pad.
I installed MS Voice Dialling and it works better. still i would prefer the Cyberon Voice dial...
just wondering
I know that When I installed MS Voice Command I had to reassign the button under settings. Once I reassigned the button from Voice Dialer to Voice Command it worked fine. Did you try that?
wm1 said:
I know that When I installed MS Voice Command I had to reassign the button under settings. Once I reassigned the button from Voice Dialer to Voice Command it worked fine. Did you try that?
Click to expand...
Click to collapse
The MS Voice dial works fine after deleting the sddemon.exe from STARTUP directory.
My wish is to have the Cyberon Voice Dial to work and not MS Voice Dial or the Cyberon Voice Comander.
Any other suggestions please ?
Why do you prefer the Cyberon voice dial?
Thanks
ebadger said:
Why do you prefer the Cyberon voice dial?
Thanks
Click to expand...
Click to collapse
I dont, but i cant make the Voice Commander to work. I wish i had Voice Dialing working, but its not...
I do prefer Voice Dialer to Voice Commander. It is just easy and works and dials who i ask it to (I don't care that I have to record my own tags) VCmd, MS Voice Command et al are all simply too complex and get it wrong too often in the car, which is where I need voice dialling!!!!
Unfortunately I have lost Voice Dialer since flashing my orange m600 with a dopod ROM, so can you tell me where you got the install program as I cant find it
Thanks
flykthewiz said:
I do prefer Voice Dialer to Voice Commander. It is just easy and works and dials who i ask it to (I don't care that I have to record my own tags) VCmd, MS Voice Command et al are all simply too complex and get it wrong too often in the car, which is where I need voice dialling!!!!
Unfortunately I have lost Voice Dialer since flashing my orange m600 with a dopod ROM, so can you tell me where you got the install program as I cant find it
Thanks
Click to expand...
Click to collapse
PM me your email and i'll send it!
geovass said:
PM me your email and i'll send it!
Click to expand...
Click to collapse
done as requested
voice dialer vs. voice commander
when I upgraded my apache to wm6 I lost voice dialer. Found voice commander but it gets it wrong more than right, even with voice tags added. never had a problem with voice dialer, so when I saw a cab for voice dialer, I installed. weird thing, though, is while voice dialer showed up in the settings and I could add tags to my contacts, I could not find the program to actually use it. Can anyone help?!
Hello all,
I recently upgraded my T-Mobile MDA C3 to WM6 with succes. The only downside to this new WM6 is that I haven't got the original voice dial software that comes with the T-Mobile version. I am now looking for a simple, lightweight voice dial application, where I can record my own voice per contact.
Does anyone know of an application that manages to do this well?
Thanks in advance!
Mee to
.. I agree.. i could also use this
take the voice control of the Eten X500 ROM, You do not need to save your voice for each record, because this software does it without this.
... thanx - but...
Hmm.. yes but thats part of the problem. Because that sounds like the Voice Commander in WM6 - And i don´t find it eays og god.. I actually would like to be abel to just record the voice info i need for each number, just like in my old WM5
Besides i must admit i´m not smart enough to extract it from the ROM, I newer tryid that
I have used a few programs that automatically change my contacts into speech so that I dont have to record my own voice. Im not very font of this method, because it requires english pronaunciation of my contacts' names. As I am from Holland, this just doenst go over so well. Thus I want to record my own voices.
I just want to use it for voice dialing: I'm not interested in starting programs with my voice. Most programs that do this run to slow to quickly dial a contact because they are hogged with features.
Is it possible to extract to voice dial software from the original T-Mobile WM5 rom? Because this software does exactly what I want it to do!
Any member has info as to wich rom cooked or not works with microsoft voice command mainly the notifications of messages and incomiong calls to the speakerphone ? please share your knowledge thanks in advance!
Another question might be... Does anyone know when MS is going to come out with a WM6 version of Voice Command?
Yes version 1.6 is made for WM5 and will run on WM6 but I have the same issues with all WM6 Rom's I have tried where it does not work with notifications or txt/email/phone calls.
What's odd is that it work's GREAT on the Wizard builds of WM6. I used VC on my Wizard with almost every different published ROM including more than a few of my own. It always worked flawlessly on that platform.
That is strange because for me, in WM6 I have only ever been able to get the "Voice Commands" part of the program to work.
It never reads any notifications and someone told me it will read txt and emails too but I have never found a way to make it do that either.
VC 1.6 does work with WM6, but requires patches
I apologize, I cannot put my hands on the files with directions for you. But if you search around the site, you can find the 0.9f cab file to install, and the files to update your version of VC 1.6 to v1.6.17913, which will allow all Voice Command features on the Hermes (including Bluetooth).
Dean
vp3g's 3.62 ROM
Radio 1.54.07
To read txt and e-mail is a different program
DIE_HARD said:
That is strange because for me, in WM6 I have only ever been able to get the "Voice Commands" part of the program to work.
It never reads any notifications and someone told me it will read txt and emails too but I have never found a way to make it do that either.
Click to expand...
Click to collapse
To have your phone read your e-mail to you requires a different program than Voice Command (perhaps Cyberon's Voice Commander? - I'm not sure).
Good luck!
http://forum.xda-developers.com/showpost.php?p=1499174&postcount=13
Hope this works!
Thanks and I thank Google XDA search as well
EDIT:
YAY Reading notifications now! THANKS!
And I guess when they told me it reads emails they meant it reads "From" and the "Subject" that are shown in the notifications.
EDIT2:
So now why did I have to download this version here and not from Microsoft? Still kind of feel like I wasted money seeing as how I ended up using a version found on these forums.
Here is a MS Voice Command 1.6 and BT Patch ONLY ExtROM that I use when building my ROMs. It will install everything the exact way necessary to get announcements and BT to work without any further changes. Just install, Run, Pair your BT, Soft Reset, and have fun.
MSVoiceCommand1.6_and _BTpatch_ExtROM.zip
http://www.sendspace.com/file/3xqdnc
If you only wanted the CABs...
MSVoiceCommand1.6_and _BTpatch_CABs.zip
http://www.sendspace.com/file/bq815x
Ron
Voice Commander
Another thing to check once you install that update, go to settings, then voice command settings and double check your setting for notifications. The default setting "Announce notifications using bluetooth hands free only".. i change my to Announce notifications using Bluetooth hands free if available.
hope this helps.. but for me, this is holding me up a long time, unless I finally realized. Working fine for me since, with ALL ROMS i have tried.
I'm using ...
... Voice Commander on my newly upgraded UK T-Mobile Vario II with Fun_Key latest WM6 ROM.
Works great, its naturally a little faster at recognising my voice than it was on WM5.
Havent tried notifications though, i used to use it for incoming SMSs but got fed up of it announcing my T-Mobile remaining Flext credits (sms's sent automatically) every few days or so!
Stu
DIE_HARD said:
http://forum.xda-developers.com/showpost.php?p=1499174&postcount=13
Hope this works!
Click to expand...
Click to collapse
lokmeup said:
Here is a MS Voice Command 1.6 and BT Patch ONLY ExtROM that I use when building my ROMs. It will install everything the exact way necessary to get announcements and BT to work without any further changes. Just install, Run, Pair your BT, Soft Reset, and have fun.
MSVoiceCommand1.6_and _BTpatch_ExtROM.zip
http://www.sendspace.com/file/3xqdnc
If you only wanted the CABs...
MSVoiceCommand1.6_and _BTpatch_CABs.zip
http://www.sendspace.com/file/bq815x
Ron
Click to expand...
Click to collapse
Thanks both of you, DIE_HARD and lokmeup.
Those worked perfectly except only when I pushed left side button of my head set(Jabra BT620s).
Is there any body who have same problem as mine?
don,t care for bluetooth which one patches so that i can have the annoucements routed to the speakerphone when i recieve a text or incoming call or email ?
leoiden said:
don,t care for bluetooth which one patches so that i can have the annoucements routed to the speakerphone when i recieve a text or incoming call or email ?
Click to expand...
Click to collapse
Use it, it works the way your asking....
http://forum.xda-developers.com/showpost.php?p=1499174&postcount=13
I downloaded and installed this. Turned the phone off and then back on.
But now my 8525 locks up whenever I slide out the keyboad. Help?!?
I'm running the WM6 provided by Cingular/HTC
Do I need to actually install Voice Commander 1.6 THEN install the above?
Either way, I'm guessing my 8525 now needs a hard reset
hi for oll how we can fix microsoft voice command to announce caller name in tp2 and whish version work well iam using 1.621725
someone please answer his question, i am using msvc 1.6.19209 on my tp2 and announce calls will not work! please save me from slitting my wrists...
very helpful stuff, glad u had time to waste.
lclopton said:
someone please answer his question, i am using msvc 1.6.19209 on my tp2 and announce calls will not work! please save me from slitting my wrists...
Click to expand...
Click to collapse
Yes, I can confirm build 19209 does NOT announce incoming calls. Has anyone tried a diff build that works?
Hi, did you check the relevant boxes (i.e. "phone" in the voice command settings to voice enable them?
On another note, does version 1.621725 support voice dialing and voice activation of apps? Somehow I'm not able to map a button to activate voice command's listening function. Any ideas?
gpod said:
Hi, did you check the relevant boxes (i.e. "phone" in the voice command settings to voice enable them?
Click to expand...
Click to collapse
everyone here knows what he/she is doing, so yes.
gpod said:
On another note, does version 1.621725 support voice dialing and voice activation of apps? Somehow I'm not able to map a button to activate voice command's listening function. Any ideas?
Click to expand...
Click to collapse
yes and yes.
settings->buttons Button 1 (Hold) -> Voice Command.
has anyone ever tried 1.6.21728 or 1.6.21812?
With my TyTn2, I remember certain ROMs would not work with certain builds of VC. So maybe we can list here the TP2 ROMs and VC builds that we've tried and failed so others can pick up until finally someone gets a combination that's 100% working.
I'll start:
ROM: 1.19.707.2 (51489) WWE, VC 1.6.19209 = no incoming call announcement
I'll continue
ROM 1.19.401.0
MSVC 1.6.19209
I installed a newer version of Voice Command (1.6.21725) and did this little reg change:
http://forum.xda-developers.com/showpost.php?p=3735744&postcount=14
I think it should work with 1.6.19209
Now I have incoming call anouncement (quite loud). BUT the ringer is very soft and the announcement stops after 3 times WITH the ringer very soft. So, you may miss a call.
Anyone knows how to shut off the incoming call announce DURING a call? It is very annoying if you have call waiting and talking to someone and someone else calls you. VC would announce the caller and you can't hear the person you're talking with.
Ok. Here is one for you all. I have gone in and checked everything that applies under msvc properly. My incoming calls are announced, as well as e-mails. It will not, however, announce sms!? Anyone else have this problem? I am running Valkyrie Firestorm 4.8.23506 ROM...also msvc 1.6.19214
Any help would be appreciated.
This is all due to the new Broadcom BT drivers in recent WM6.5 builds. They are much better drivers than the old ones. There is nothing you can do to fix this. MS will need to update VC for a resolution, but since they are planning on replacing it I wouldn't hold my breath.
This is really bugging me, I am used to having VC announce calls on my Diamond. Check out post 82 at this thread:
forum.ppcgeeks.com/showthread.php?t=41645&page=9[/url]
It seems as though the original Pro was having the same problem in the beginning. The fix kind of worked for me. This is the last thing I need to make my phone perfect
Hi,
So I compiled all the MS voice command fixes into a thread.
And out came the MS Voice command config app. The mortscript app will back up your current settings and allow you to update them.
If you want to test any of the features posted there that are not in the release version, let me know and i will send you an update to test.
The MS Voice Command Config app.