Develop Bugs

New BT 1.9 High Quality Audio for PPC?

The guy who made this post emailed it to me. http://forum.xda-developers.com/viewtopic.php?t=19128&highlight=
I have not tested it.
I scanned with Trend, it is clean.
Please post if it works with XDAII and works with Hands Free profile as well.
I have to go to work, no time to play with it.. DAM IT. :x
www.6777777.com/xdaII/bt/BT-PPC_AV_Setup.rar

I have iMate JAM but I'd be willing to try almost anything to improve the BT stack from MS. Specifically, it doesn't seem to support factory carkits (esp. voice-dialing from the carkit, thru the phone) - the xdaII does do it with the widcomm stack...any help on this out there? I have BT tools installed but doesn't help...

It would not work on XDA2 or Jam.
Theoretically it can work on XDA2 with Widcomm BT installed but noone tested that.

only works on ipaq

mobileprofi said:
only works on ipaq
Click to expand...
Click to collapse
I've heared that cracked version works on BlueAngel devices

mamaich said:
mobileprofi said:
only works on ipaq
Click to expand...
Click to collapse
I've heared that cracked version works on BlueAngel devices
Click to expand...
Click to collapse
It also works on XDA II. I've been using HP Stereo BT Headphones with my XDA II for months now.

What's a "cracked" version? I have tested the pda2k w/widcomm & dialing thru carkit to phone works fine -- I even tested the new rev of the 6315 from TMO & it too works fine...so I gots to get this JAM workin'! --can't fall behind!!

dtktvu said:
mamaich said:
mobileprofi said:
only works on ipaq
Click to expand...
Click to collapse
I've heared that cracked version works on BlueAngel devices
Click to expand...
Click to collapse
It also works on XDA II. I've been using HP Stereo BT Headphones with my XDA II for months now.
Click to expand...
Click to collapse
I am using xdaII rom 1.60, does it work in this version ? Can you share the patch ?

CDTV said:
What's a "cracked" version? I have tested the pda2k w/widcomm & dialing thru carkit to phone works fine -- I even tested the new rev of the 6315 from TMO & it too works fine...so I gots to get this JAM workin'! --can't fall behind!!
Click to expand...
Click to collapse
do you mean install a widcomm stack and the pad2k patch together? By the way, which widcomm stack you using ?

Has anyone tested this "New BT 1.9 High Quality Audio for PPC"?

Blue tooth
Hi I have tried to post on here a few times but no replies yet.
I have to appologise as I am new to this.
I have XDA2s and am wanting the best possible bluetooth set up for use with hands free, (my device is ck3000 parott) I accept that at present cant voice dial but would like consistant decent connection.
I have updated radio rom to 1.10.00 and blue tooth to 3900 but still not great, sometimes fine and then crap.. If I clear pairings on car kit and phone then soft reset phone then re pair device it works ok, but this is a real arse ache everytime I get in and out of my car.
can anyone help would it be worth upgrading to this BT version or indeed is it likely to be compatable

Stereo Music on BT headset - XDA Exec

Hi,
I'm new on here and am a novice with my XDA Exec! I'm sure this has been answered before, if so if you could point me in the right direction I would be very grateful!
What I would like to know is this:
I currently use my xda exec with a Jabra BT250v headset for the phone, but I can't get this to work for listening to music, I hear it for a couple of seconds then the voice dial kicks in and it disconnects. I understand that I need A2DP to do this but when I asked O2 I didn't get far!
I want to buy Motorola 820 ? or jabra 620 ? stereo BT headset, but want to know they will work properly first. Incidentally any feedback on which is best would be great.
As I said, I am not very technical so please bear that in mind when answering.
My XDA Exec is running pretty standard O2 set-up, the only software I can remember installing is My Sport Training version 3.97 (not registered)(with My Polar Download Version 1.51 (not registered) polar heartrate stuff and Sprite Backup software version 5.1.0, Build 1447
Current ROM version: 1.13.82 WWE
ROM date: 11/30/05
Radio version 1.04.02
Will this help or not ? "Xda_Exec_Upgrade_v1.30.162" from 02 website
Thanks, Huw

Oh yes, and why is my email address displayed as my user ID and how do I change it ??
Thanks, Huw

Feedback
Hi,
I'm in the same position with the stereo heaphones Moto HT820 as you. Did you get any feedback on how to get these working? i.e. A2DP?

After a longtime suffering with UNI BT and Jabra 800 now everything is Ok

After this long time of suffer, I bought the new Jabra BT 8010 it solved all my problems of chopping sound and distorted voice all my listeners were complaining. not anymore with the great BT 8010. MONO and Stereo Headset or dual headsets with great display showing Caller ID and a lot of information plus a built in Phonebook for 30 numbers, very smart switching between A2DP and Handsfree profiles.
It is beautifull try it
Finally after the long suffer, I believe our problems was due to different generations between Headset and PPC's.

Jabra
haha..
That's always nice to here if a product is functioning that good.
I bought the Jabra BT 320s, less than yours ofcourse, but also works great, al buttons are functioning ok! (and the price... 45 euries)
Nog een prettig weekend,
Groeten, Leo

Laurentius26 said:
haha..
That's always nice to here if a product is functioning that good.
I bought the Jabra BT 320s, less than yours ofcourse, but also works great, al buttons are functioning ok! (and the price... 45 euries)
Nog een prettig weekend,
Groeten, Leo
Click to expand...
Click to collapse
Are you hapy with the Radio .14.10, I tried it for a short time, I found my listeners were complaining more so I went back to .13 radio. I am wondering if it will be any better than .13 with my new 8010. Please make a comparison between them cos am sure you were at .13 earlier.

heldeeb said:
Are you hapy with the Radio .14.10, I tried it for a short time, I found my listeners were complaining more so I went back to .13 radio. I am wondering if it will be any better than .13 with my new 8010. Please make a comparison between them cos am sure you were at .13 earlier.
Click to expand...
Click to collapse
I am using Radio 1.14.10 on Helmi 3.5 vanila with Jabra BT8010 - the sound is awesome.... both with mono as well as stereo and I am very happy with it! My only desire with the BT8010 is to make it show the caller ID names form the Outlook phonebook...perhaps using Jetware - but I have failed so far. The names show though if they are in the 30 number internal phonebook of the BT8010!!
regards, Mayank

agrofoyer said:
I am using Radio 1.14.10 on Helmi 3.5 vanila with Jabra BT8010 - the sound is awesome.... both with mono as well as stereo and I am very happy with it! My only desire with the BT8010 is to make it show the caller ID names form the Outlook phonebook...perhaps using Jetware - but I have failed so far. The names show though if they are in the 30 number internal phonebook of the BT8010!!
regards, Mayank
Click to expand...
Click to collapse
You hit the point that really confused me since the BT800 why the Caller ID is not showing although it is showing while using any SonyEricsson since the T610 onwards. It is really strange while we have all these genious hackers and developers with several generations of Mobile, PDA and Headsets this problem is not solved not only on HTC but all others including NOKIA except for the SonyEricsson.
Does anybody Khow why for God Sake.

Radio .13
Hi,
You're wright, I was using Radio .13, but for me Radio 14.10 has got a lot better signal I noticed. No complains with my listeners!
With radio .13 I had a lot of signal drops, even at home, but maybe it has also to do with the different Roms I used before.
With Helmi's romversion 1.1 the radio is working just fine, no complains by me.
Cheers Leo
heldeeb said:
Are you hapy with the Radio .14.10, I tried it for a short time, I found my listeners were complaining more so I went back to .13 radio. I am wondering if it will be any better than .13 with my new 8010. Please make a comparison between them cos am sure you were at .13 earlier.
Click to expand...
Click to collapse

WM6 Bluetooth Headset Problem

Hi there I'am new here.... seached the forum and google a lot but didn't find an answer...
Just flashed from XDALive 2.0 to Black 2.0, radio 1.38.00.10 and HardSPL v6 with help of the manual of mrvanx.
My problem with the rom of XDALive 2.0 was that TomTom 6 keep hanging serveral time. The headset (bluetooth build in CAR, peugeot 207) was working perfectly. After the upgrade to Black 2.0 the TomTom problem was solved , it works perfectly now. The only what came up was the bluetooth headset probleem. The connection is ok but I don't hear any sound??
Flashed back radio ROM to 1.35 no results...
Found something interesting...
When its not connect with the carkit, turn on bluetooth, dail a numbers and turn on the Speaker, it will eventually connect to the carkit automaticly (and I got sound thourgh the carkit!
When searching for bluetooth devices it will find the headset and the carkit goes into 'calling mode'. When dailing a contact directly after that the carkit will work. But the next try it will mute the radio but doesn't give any sound on the carkit.
When allready connected with bluetooth on the carkit it wont give any sound thourgh it.... strange.. Tried serveral other ROMS but they are giving me the same problem...
Widcomm BT Stack (http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72) also tried, didn't help... anyone some suggestions?
PS.: My old nokia still works, it can't be the carkit..

Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.

jcb_home said:
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
Click to expand...
Click to collapse
When searching for a new bluetooth device WM6 sees a headset and the connection is successful. The 'Set has headset' is availible and is set. The option Wireless Stereo isn't support I think, its not availible as an option.
When calling you can turn on/off your headset back to the phone. That works but there is still no sound on the headset.

balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.

I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.

Same problem with HS850
simon_darley said:
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
Click to expand...
Click to collapse
I have exactly the same problem, and I didn't solved yet....but I've found this bypass:
When the phone rings I answer with the bluetooth handset and receive the beeb on connect call.....then I close the BT headset and as soon as I re-open it, I have the headset working.....I have to do this for every incoming or outgoing call.
My BT headset was working well with the black 1.2.
This is the only issue I've found in the black 2.0.....I think is the most stable and fast rom.
Bye prengo.

jcb_home said:
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Click to expand...
Click to collapse
My other Bluetooth devices are working fine. My bluetooth GPS receiver works just fine with TomTom... no issues there.

Just flashed back to XDA-Live (v0.20.1) and the headset works without any problem.
Only thing now is Tom Tom 6 hangs directly after the start of it. Anyone familiar with this issue?
thx
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?

A common thread seems to be the HS850
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.

cruzer said:
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
Click to expand...
Click to collapse
WMXL .20 is based on a beta WM6 build and Black 2.0 is built on an RTM build (non-beta)

With Moto HS850 too.
edwinyuen said:
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
Click to expand...
Click to collapse
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.

I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0

mike6502 said:
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
Click to expand...
Click to collapse
It's great that you tracked this down so specifically. I guess this means for those of us with these issues, we have to avoid newer WM6 builds until someone looks into this.

idee2000 said:
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
Click to expand...
Click to collapse
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0

rabdo said:
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
Click to expand...
Click to collapse
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.

AdamsJourney said:
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
Click to expand...
Click to collapse
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me

Hi,
I am using radio rom 1.40.30 and Black 2.0.
I am using H700 BT headset
the problem i face are opposite from you all.
If i am already talking halfway and i flip the boom to continue talking with the BT headset...it won't work.
if i receive a call and I flip the boom while the phone rings, it is ok and i can even press the button on the h700 to answer the call.
Radio 1.40.30 seems to connect with the BT headset much faster.
last time when i was using my previous default factory rom, when i flip the boom while the phone is ringing, it will take ages to connect
why not u guys try radio rom 1.40.30 also

rabdo said:
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Click to expand...
Click to collapse
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.

edwinyuen said:
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
Click to expand...
Click to collapse
Sorry, what I meant is that perhaps Cyberon Voice Commander is 'fixing' the issue on my system, rather than saying MS VC 1.6 was causing the problem. Next time I hard reset I will test my headset BEFORE installing cyberon software

Ok I'm still having this problem and this is what I have tried so far:
I downgraded to XDALive v0.10 and my BT worked, but no WiFi
So I upgraded to HardSPL v6, then installed the 1.40.30.00 Radio rom, and then went back to Cingular Black 2.0, WiFi back but no BT unless headset is activated after call is initiated.
Installed Cyberon Voice Commander, didn't effect anything, still no BT
Removed Cyberon Voice Commander and re-installed MS VC 1.6 installed all the hacks and still no audio in the headset.
So it looks like it is something in the ROM that is killing the BT functionality. Maybe because the XDALive is based on a beta WM6 and the Black is based on a full version?

[HTC 8525 + WM6] Bluetooth keeps disconnecting

Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!

viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
which WM6 ROM are you using?

I had this problem with my Audi A4 car phone. The ROM versions using build Build 17745.0.2.3 were not good for that. Now, I'm using the Black Majik ROM and that works like a dream for the BT connections.

walshieau said:
which WM6 ROM are you using?
Click to expand...
Click to collapse
I have Cingular HTC 8525 [HERM100]
ROM Version: 3.30.2.1
ROM Date: 04/17/07
Radio version: 1.41.00.10
Protocol Version: 32.74.7020.18H

viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
Did you manage to solve this? Is so how?
Thanks
Msuk

i started having the same problems but i noticed it after i installed the voice command.. the rom that i use is the gm360 gold. the problem ive got was whenever i was in a phone call using my blutooth and i received a text message it would deactivate my headset. if ur having somewhat of the same problem try disabling ur voice command software...

Multiple AT&T/HTC WM6 ROMs?
My 8525 with the WM6 ROM can no longer route the audio to the BT headset (a Moto HS850 - but this is irrelevant, I suspect).
Basic BT headset usage was fine with WM5 (excepting the known issues with VoiceCommand).
I thought that perhaps the issue was related to the various little registry tweaks and sw patches. However, I had to do a reflash (for other reasons) and currently have just the default WM6, no registry tweaks, no BT sw patches, and MS VoiceCommand 1.6 installed (but set to NOT use the BT headset).
Pairing works fine. So does activation recognition (i.e. the little headset appears in the notification area when I open the boom on the headset and I can hear the background establishment of the BT channel). But audio (dialing tones and Connected call audio) do not reach the headset. The audio also doesn't go to the phone's speaker.
So, are the official ROM updates that repair this? Or, is the cost of going to WM6 the abandonment of BT headsets?
By the way, VoiceCommand 1.6 works fine--if I tell it to stay away from the BT headset.

Pays WM6 Roms
I had the same BT disconnecting problems with my original german Vodafone WM5 and also still have them with Pays WM6 ROMs (2.02 - 2.15) in my Audi A6 MMI.
With the original german HTC WM6 ROM BT worked very well.
Everything else on Pays ROMs is really great. He´s doing great jobs.
Any idea?

I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!

ai6908 said:
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
Click to expand...
Click to collapse
Come On, experts on the XDA portal, no solution?? noooo way!!??

My friend had the same issue with an tytn2 and last schap's rom in french language.
After an hard reset i get BT work fine with his OPEL.
But before i made lot of test desinstalling soft check registery key with no result. I still do know why BT was disconecting woth no reason.
Cheers.

Audi Bluetooth hands free
I had the same problems in wm6 with some roms.
I use the official HTC TyTn wm6 with excelents results, also Schaps 4.31 work very good (No disconection at all).
Now I am using Pay WWE 4.30 with many disconections.
BTW I have the audi TT bluetooth option.

On my 8525 Hermes I use the latest Pays Rom and it was disconnecting all the time (Parrot BT) - BUT then I decided to TURN OFF THE WAN and it improved greatly. Other thing I noticed is that the Hermes has to be in DIRECT LINE OF SITE of the BT device at all times or it is erratic.

BT
It seems there are differences in the WM6 versions. As said earlier in this thread for me original HTC and Schaps WM6 ROM versions are running without any BT disconnections.
Tried several WM6.1 versions now and every single one is working fine with my Audi MMI.

Similar problems handing BT control between applications
Hi all, I've been experiencing similar problems since changing ROMs. Originally with Schaps 3.60a I was able to make a call whilst listening to music all using my BT headphones. The Call would pause the music & resume afterward. It worked great! However since changing to Schaps 4.0, 4.2 & now CRC's PHKv12r9, I've never had the same. On a couple of rare occasions it has all worked fine but more often the bluetooth has to be turned off & back on again to reconnect. it seems to relate to what other programs are also running. I suspect there must be registry settings which control the bluetooth operational modes which are brought into play by the various programs running.