1 - Unzip lokiwiz.zip to somewhere in your computer
2 - Copy EnableRapi.cab to your Wizard
3 - Execute the EnableRapi.cab in your phone. Wait for it to finish
4 - Guarantee that your phone is connected via activesync with the computer
5 - Execute lokiwiz.bat (on your computer! My inbox is filled with this kind of error) and follow the instructions on your screen...
I'm newbie about PPC so please everybody helps me!
I bought Cingular 8125 from US then brought to Viet Nam. I want to follow your instructions above to unlock but I can not run the EnableRapi.cab file from device because I turned on the phone just see:
IPL 1.08
SPL 1.08
GSM 01.09.11
OS 1.8.11.1
Then received "Network is locked. Please input unlock code" so I can not access the phone.
Could you please advice me how to unlock in this case.
Many thanks!
Qred
I have run the file EnableRapi.cab already then tried lokiwiz02 is received:
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: U
Unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Your phone is now unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
And here is tried lokiwiz03a:
C:\lokiwiz03a\Lokiwiz03\LokiwizMsl.bat
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
InitializingThe system cannot find the path specified.
.The system cannot find the path specified.
.The system cannot find the path specified.
...........The system cannot find the path specified.
..........Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
The system cannot find the path specified.
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
The system cannot find the path specified.
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
I don't know the reason why... Could you please help me to unlock... I input the SIM and see only the screen is "Network is locked. Please input unlock code"
Many thanks,
Qred
Okie. I have just unlocked successfully. Thanks for the great tool!
But I still have a question is: "where can I download the newest ROM for Cingular 8125"?
how did you finally get it working? Steps? I'll be getting a locked phone very soon.
for latest OS
The above procedure is not working for the following OS version in Cingular 8125.
IPL 2.25.0001
SPL 2.25.0001
GSM 2.25.11
OS 2.25.11.1
Software for unlocking cingular 8125
Hi Got the loki tool but when i got to run it, it was giving me an error n then my Phone would restart. Did it four times n finally gave up!!!!!!!!!!! Help
Oh Yeah Does anyone know how to unlock a Blackberry 8800 cingular?????????:
Related
kizo said:
i manage to retore my mda back. But now am getting the simlock contact service provider error. I reverted back to thr tmobile rom i got of th ftp server on xda-development ftp site.
I rerun the lokwiz 2b and my this is where its gettin stuck now, I have been on this stage for 3hrs
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
any ideas.
activesync is now connecting but am having trouble with getting my setting synched, I think this could all be related. because I can explore to phone using windows explorer, however i can't explorer to the device's windows folder.
Click to expand...
Click to collapse
Guys I managed to get past this and got a unlock code, by using a different computer, I don't know why I was not able to using mine. I did disable, firewalls, anti virus etc.
However, when I put in a foreign sim. Qm not gettin that prompt to enter a unlock code. I stll get the white screen with the data crashes. I did do a hard rest, but still. I'm now using the stock tmobile rom 1.08 I still get that msg with my tmobile sim. Any help to fix this will be welcome. Thanx.
Kizo
Trying to unlock my Cingular 8125 (2.25.11 ROM) and when I run the Lokiwiz.bat I get the following:
===================================================
C:\Load\pocket-pc\unlock>Lokiwiz.bat
machinagod's HTC Wizard Unlocker v0.2
NOW WITH CID Unlocking POWER!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: U
Unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
Copying C:\Load\pocket-pc\unlock\Utils\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=22: 3c63dc20 - e57f87f1edb21c89
Key idx: 22
olddata: cf30320b42870681Unlocking... newdata: dee342037c9d3bd3
newsum=86a9a569 encsum=7a565b49e0a5e38f
DONE.
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(unlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072746
Your phone is now unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
C:\Load\pocket-pc\unlock>
=====================================================
Why am I getting this ITWriteDisk error?
Try with V0.3, it will provide you a code up to your IMEI
http://forum.xda-developers.com/viewtopic.php?t=50768&highlight=lokiwiz3
i sim unlocked my G4 wizard with lokiwiz03a before bricking it. got it back from repair. and tried another sim, but its locked.
tried to lokiwiz03a it again. i get the same code back. i enter it but doesnt work
any ideas?
LOG
this is the log out put:
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
Copying C:\Documents and Settings\cwnl-sbadle\Desktop\lokiwiz03a\Lokiwiz03\Utils\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0100000000000000
SIMLock Code: 12345678
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
------------------------------------------------------
tiA
solution
*Copy the cab's from the Utils folder in the Lokiwiz03a.zip file to your Prophet and execute them.
(There are two files : "Cert_SPCS.cab" and "EnableRapi.cab")
did above and now it works!
hi all
can anyone help with unlocking i-mate k-jam?
I have a phone which was reported as stolen and got IMEI locked. I want either to unlock this (as i understand it involves changing the IMEI which has some legal problems in some countries) or simply unlock the simlock and move to another company.
I spent the last two days reading this forum but i can't find a basic explanation about what it means changing the ROM and if it can harm the phone, if it is reversable and if it means replacing the operating system and where can i get the right rom for my phone...
I tried this lokiwiz03a but it didn't work. after manually copying the two cabs to the phone this is the output that i got:
C:\>LokiwizMsl.bat
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: Qאm▒ך»BΘGφ2RW\↑►
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Click to expand...
Click to collapse
What is this strange simlock code?
Thanks,
Roy.
Hi boys
I have a question for you..
Can I load the T-Mobile Dash Rom on my HTC S620Pro unlocked?
I love the T-Mobile Dash Home screen theme and i f it's possible I want run it on my HTC S620 Excabilur
Thank you in advance for the answer
Yep but you might need to CID unlock (obtain SuperCID) which costs £20 ($39). If you just want the home screen just ask someone for it and copy it on. I would post it but I currently have the WM6 Dash ROM on my S620 and it probably doesn't have the home screen you mention.
I was wondering if anyone could help me.I have a HTCs620 and I am trying to flash it with the T-Mobile WM6 Rom.I have had the unit CID unlocked with IMEI Check and still I get the invalid model ID (something like that)I read something about upgrading the bootloader but where do I find this file for the HTC Excalibur......Any other suggestions since I have tried evereything else............
hope this helps
http://www.esnips.com/web/xdadevelopers
please post after a reply if its ok !!!1
bidinot said:
I was wondering if anyone could help me.I have a HTCs620 and I am trying to flash it with the T-Mobile WM6 Rom.I have had the unit CID unlocked with IMEI Check and still I get the invalid model ID (something like that)I read something about upgrading the bootloader but where do I find this file for the HTC Excalibur......Any other suggestions since I have tried evereything else............
Click to expand...
Click to collapse
There are different versions of Excalibur EXCA2xxx and ECXA1xxx
You could write an email to imeicheck and they will give you this solution regarding the invalid vendor id:
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/-
the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex Workshop" from conext menu
Search for word "BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C ==> !!! replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message: "Data Crashed, contact service provider" (!NO PANIC!) ==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again). In case you have problems please indicate the step letter/number which is not clear/not working for you. If you REALLY do it STEP by STEP exact like described you will have no problem.
Click to expand...
Click to collapse
Hello,
Thanks for the great guide.When I get to the part to look for the bsa file in the hex editor program I cant seem to find it.Also, when I save the hex editied files do I save them to the folder were I extracted the Rom.I tried to run the utility without editing the bsa file (because I could not find it) and when I tried running it after pulling the usb cord it gave me the error message Invalid Update Tool.Do you know of anyone who can edit the T-Mobile WM6 Rom for me even if I have to pay for it.....
One last question...the rom I am supposed to edit with hex editor is it the new Rom (t-Mobile WM6) or the bootloader upgrade Rom..
Thanks in advance!!
r0p3 said:
There are different versions of Excalibur EXCA2xxx and ECXA1xxx
You could write an email to imeicheck and they will give you this solution regarding the invalid vendor id:
Click to expand...
Click to collapse
hello...
i have 1 Softbank X02HT from Japan which came out lock to provider from softbank.. i want to unlock this phone, so i bought unlocking codes from a friend but when the codes arrived and i want to enter it but i cant figure out how to key in those codes,, ive searched a lot of forums how to enter those codes but it seems like my phone is "Counter Blocked" some says i had to flash other roms to be able to enter those codes until i read this http://forum.xda-developers.com/showthread.php?t=398945 now the problem is i cant Application Unlock my phone when i use SDA Application and i gives me error like "Phone is not unlockable"
my phones info :
CAVA100
IPL-0.04
CAVA100
SPL-1.00.0000
please help me to get through with it...
thanks...
LiquidSky said:
hello...
i have 1 Softbank X02HT from Japan which came out lock to provider from softbank.. i want to unlock this phone, so i bought unlocking codes from a friend but when the codes arrived and i want to enter it but i cant figure out how to key in those codes,, ive searched a lot of forums how to enter those codes but it seems like my phone is "Counter Blocked" some says i had to flash other roms to be able to enter those codes until i read this http://forum.xda-developers.com/showthread.php?t=398945 now the problem is i cant Application Unlock my phone when i use SDA Application and i gives me error like "Phone is not unlockable"
my phones info :
CAVA100
IPL-0.04
CAVA100
SPL-1.00.0000
please help me to get through with it...
thanks...
Click to expand...
Click to collapse
so u r able to unlock the sim or not?
cruzzmz said:
so u r able to unlock the sim or not?
Click to expand...
Click to collapse
hello...
i just able to sim unlock the phone via code after flashing this firmware http://rapidshare.com/files/14940579...0_182_Test.exe
but still i cant app unlock the phone... i want to flash WWE rom..
i tried using mtty but then it shows:
CMD>task 32
"Level=FF"
please do help me...
thanks
LiquidSky said:
hello...
i just able to sim unlock the phone via code after flashing this firmware http://rapidshare.com/files/14940579...0_182_Test.exe
but still i cant app unlock the phone... i want to flash WWE rom..
i tried using mtty but then it shows:
CMD>task 32
"Level=FF"
please do help me...
thanks
Click to expand...
Click to collapse
try the hard SPL thread ... there is a program to unlock the phone
cruzzmz said:
try the hard SPL thread ... there is a program to unlock the phone
Click to expand...
Click to collapse
thanks...
the phone is SIM Unlocked now...
but i got this error after using HardSPL-Cavalier-1.0-JockyW
thanks...
LiquidSky said:
thanks...
the phone is SIM Unlocked now...
but i got this error after using HardSPL-Cavalier-1.0-JockyW
thanks...
Click to expand...
Click to collapse
Error 270 ... U must do HardSPL first ... Pls follow instruction on the Hard SPL thread
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
yukster said:
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
Click to expand...
Click to collapse
Have u tried tis tool?
http://forum.xda-developers.com/attachment.php?attachmentid=91644&d=1213100403
what's the end of the story ?
these japanese guys just gone with the wind.
Maybe it's work, because I just did a test on my x02ht. I’m able to modify register through CeRegEditor after SDA_ApplicationUnlock.
Need help to Flash X02HT from JAPAN
HI,
I have been trying desperately to unlock this phone. Before I buy code I need to know it it can be unlocked. When I power on the phone a window keeps popping up with or without asking for SIM unlock code.
I tried JumpSPL and keep get an error: CreateProcess failed with errorcode =30123 - UNKNOWNERROR 0X000075ab.
I still tried HARD SPL -Cavalier 1.0 JockyW and keep getting an error :-
ERROR (270): UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
Please LiquidSky have a file that he used from rapidshare and flashed his phone successfully can anyone share with me please?
I need urgent help
Thanks
I have the same problem. I would appreciate if someone knows how to solve it.
Thanks!
Totalelectronics said:
HI,
I have been trying desperately to unlock this phone. Before I buy code I need to know it it can be unlocked. When I power on the phone a window keeps popping up with or without asking for SIM unlock code.
I tried JumpSPL and keep get an error: CreateProcess failed with errorcode =30123 - UNKNOWNERROR 0X000075ab.
I still tried HARD SPL -Cavalier 1.0 JockyW and keep getting an error :-
ERROR (270): UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
Please LiquidSky have a file that he used from rapidshare and flashed his phone successfully can anyone share with me please?
I need urgent help
Thanks
Click to expand...
Click to collapse
yukster said:
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
Click to expand...
Click to collapse
TESTED and working.......
good ..................................................