Develop Bugs

help! Network Locked and no code

Hello. I used the xdadev all unlock v1.6. not sure what happened. but I didn't get the code. Now it says Network is locked, Please input unlock code. I tried typing in 00000000 as the notes said but it isn't the right code. Please help I've just bought it and haven't even made a call yet

hi, you never said what phone you have but iv just had this exact same problem on my t-mobile mda compact.
in the end i think the problem seemed to be my connection to activesync via usb?
to get it unlocked you need to reset the phone (softreset will do) when it ask for your sim code just click cancel, then copy the said file version 1.6 to the mobile through activesync (usb), when its copied unplug the usb, then run the file. only run it once and wait until the confirmation pops up. then restart your device.
worked for me!
kevo

How to unlock Cingular 8125 when not access the phone

1 - Unzip lokiwiz.zip to somewhere in your computer
2 - Copy EnableRapi.cab to your Wizard
3 - Execute the EnableRapi.cab in your phone. Wait for it to finish
4 - Guarantee that your phone is connected via activesync with the computer
5 - Execute lokiwiz.bat (on your computer! My inbox is filled with this kind of error) and follow the instructions on your screen...
I'm newbie about PPC so please everybody helps me!
I bought Cingular 8125 from US then brought to Viet Nam. I want to follow your instructions above to unlock but I can not run the EnableRapi.cab file from device because I turned on the phone just see:
IPL 1.08
SPL 1.08
GSM 01.09.11
OS 1.8.11.1
Then received "Network is locked. Please input unlock code" so I can not access the phone.
Could you please advice me how to unlock in this case.
Many thanks!
Qred

I have run the file EnableRapi.cab already then tried lokiwiz02 is received:
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: U
Unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Your phone is now unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
And here is tried lokiwiz03a:
C:\lokiwiz03a\Lokiwiz03\LokiwizMsl.bat
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
InitializingThe system cannot find the path specified.
.The system cannot find the path specified.
.The system cannot find the path specified.
...........The system cannot find the path specified.
..........Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
The system cannot find the path specified.
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
The system cannot find the path specified.
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
I don't know the reason why... Could you please help me to unlock... I input the SIM and see only the screen is "Network is locked. Please input unlock code"
Many thanks,
Qred

Okie. I have just unlocked successfully. Thanks for the great tool!
But I still have a question is: "where can I download the newest ROM for Cingular 8125"?

how did you finally get it working? Steps? I'll be getting a locked phone very soon.

for latest OS
The above procedure is not working for the following OS version in Cingular 8125.
IPL 2.25.0001
SPL 2.25.0001
GSM 2.25.11
OS 2.25.11.1

Software for unlocking cingular 8125
Hi Got the loki tool but when i got to run it, it was giving me an error n then my Phone would restart. Did it four times n finally gave up!!!!!!!!!!! Help
Oh Yeah Does anyone know how to unlock a Blackberry 8800 cingular?????????:

wizard sim unlock code does not work anymore

i sim unlocked my G4 wizard with lokiwiz03a before bricking it. got it back from repair. and tried another sim, but its locked.
tried to lokiwiz03a it again. i get the same code back. i enter it but doesnt work
any ideas?

LOG
this is the log out put:
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
Copying C:\Documents and Settings\cwnl-sbadle\Desktop\lokiwiz03a\Lokiwiz03\Utils\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0100000000000000
SIMLock Code: 12345678
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
------------------------------------------------------
tiA

solution
*Copy the cab's from the Utils folder in the Lokiwiz03a.zip file to your Prophet and execute them.
(There are two files : "Cert_SPCS.cab" and "EnableRapi.cab")
did above and now it works!

hi all
can anyone help with unlocking i-mate k-jam?
I have a phone which was reported as stolen and got IMEI locked. I want either to unlock this (as i understand it involves changing the IMEI which has some legal problems in some countries) or simply unlock the simlock and move to another company.
I spent the last two days reading this forum but i can't find a basic explanation about what it means changing the ROM and if it can harm the phone, if it is reversable and if it means replacing the operating system and where can i get the right rom for my phone...
I tried this lokiwiz03a but it didn't work. after manually copying the two cabs to the phone this is the output that i got:
C:\>LokiwizMsl.bat
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: Qאm▒ך»BΘGφ2RW\↑►
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Click to expand...
Click to collapse
What is this strange simlock code?
Thanks,
Roy.

Error 270 fix

I'm running Vista and when I wanted to run the bootloader upgrade on my Dash I kept getting this message error. Error 260. anybody find any way around it? I've tried to manually set th ephone into bootloader mode, same result. help!! PS the error is supposed to mean "port already open" or "open port error" I'd really appreciate any help!

erro 260 - fixed
switches to my wife's laptop that had XP on and it worked like a charm. I'd be glad to assist anybody in the process od de-branding their Dash. Removing the ugly T-mobile paint logo on the unit was easy too.

ERROR 260
Sorry for thislong story....
OK, I've been on looking around the site for a while. I installed the WM6 Beta. I was looking for two days for the WM5 ROM only because I want the little things to work. Finally found it. But now every time I try to flash my phone ack to WM5 bI keep getting the 260 connection error. The readme only says to restart the comp and phone and try again. I have literally, no joke, done this 12 times in the last 2 hours, hoping maybe it will go. All the phone does is go to the green, blue, and red screen and stays there. Then the comp says it gets the error. I know it's connected because Sync Center syncs, I can look through the phone, install apps from my comp, etc. Also I tried doing the 'Update only' rom for version 1.11 or so, and it starts to go but then says its the wrong version RUU. Has anyone had this problem before? Flashing to WM6 did this once and then worked after.
I'm running Vista Premium, stock sync cable, Microsoft Sync Center for vista. All this is the sameas when I flashed to WM6.

There goes another 3 attempts, trying to change timing, reinstalling Sync Center, etc.

Decided to try it on my XP desktop, and for some reason, first time it worked. Maybe Vista didn't like it? Who knows..

Mladito Vista!!
Hi there,
I have the same little problem here!!!! I have a laptop with Vista (garbage)... so i´ll try on a laptop running XP...thank you for posting this, it was a big help..i let you know how it turns out... see you around

WM5 to WM6 --> Problems at 3%
Hi all,
I've errors upgrading my phone to WM6.
I Can open the Wizard (it`s a generic to S620/S621), but in 3% i`ve an error.
I think thats my phone has a blocked CID.
How can i unlock this? i`ve tryed with tools to unlock, but without success...
Regards,
Emerson

Hello,
Welcome to the forum.
Your problem is that your phone is CID-Locked. Hence, you'd need to use a paid service to unlock it. I personally used the following service which provides instant unlocking:
http://www.gsmliberty.net/shop/htc-excalibur-instant-remote-unlock-p-1452.html
I used a credit card, it's 39.99 $ - I was done unlocking and upgrading to Windows Mobile 6 in about 15-20 minutes.
Good Luck !
P.S:
Steps to install WM6
- First CID/SIM Unlock using GSM Liberty
- Flash Bootloader
- Install WM6 ROM (It will take some time for it to load so give it about 5-10 mins. it does get stuck at the boot screen for sometime but eventually it'll load)
- Install Office/Audio Manager
- Application Unlock your phone using SDA Application Unlocker
- Install the necessary software/tweak/hacks
there you go, if you have any questions, feel free to ask. also, if you use the search function, everything's available here.
Good Luck !
Here's the following links you require
1) Flash Bootloader
ftp://xda:[email protected]
2)here's the WM6 ROM:
http://files-upload.com/files/472108....90_Ship.ex e
here's office for those who want it:
http://rapidshare.com/files/31706137/Office.WM6.zip
here's Htc Audio Manager for those who want it:
http://forum.xda-developers.com/atta...1&d=1183909664
Ps. I better like German flash, it's smaller due to fewer language packs, and contains English, here: http://files-upload.com/files/472422....90_Ship.exe
thanks to jsp_m for the links.

Hi,
I`ve problems because my IMEI is from Brazil...
And in the site accept only 15 digits IMEI..
My imei is: 35*************02 (17 Digits IMEI)
Thanks,
Emerson

hey,
that's not a problem. everyone has 17 digits, don't include the last 2 digits when you type in your IMEI so for example
11111111111111102
just include the first 15 and submit and you'll get an unlock link in your e-mail, follow that link, scroll down to the page to download dashunlock software and download the .UNL file for your IMEI and then make sure ur phone is connected to active sync and it's green, open the dash-unlock program and then hit enter then it'll ask for the .UNL file, locate it and open it and your good to go - your phone will be unlocked then soft reset it or i think it's automatic and everything's set.
good luck !
p.s: in other words, don't include 02 when you type in your IMEI.

HTC Audio Manager
http://forum.xda-developers.com/showpost.php?p=1355010&postcount=5

Thanks!
I'll Try NOW and let all know...
Regards,
Emerson

Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,

tatarezende said:
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
Click to expand...
Click to collapse
Emerson;
Read the second post from luckybandit on this thread. That´s exactly what to do to get rid of the "invalid model" issue. Download the bootloader, flash the phone, flash the new ROM and be patient.
My excalibur is also from South America, and worked OK. If you have any doubt just let it know to this thread.
Boa sorte!

Hi,
I`ve problems with the link of Boot loader....
Anyone can send the full URL?
Thanks,
Regards,
Emerson

Hello,
I'm sorry about the links not working, here - i've attached the bootloader for you. here's what you do
1) Run bootloader (attached file)
2) Run the WM6 WWE ROM
3) Run SDA Application Unlock
4) Install Office/Microsoft Voice Command/HTC Audio Manager
5) Install Tweaks/Hacks
here's a site that has some applications and tweaks:
http://mobile.surrealnetworks.com/DashApps.htm
and search this forum, there's tons of information, hacks - etc.
Good Luck !

oh by the way, did you unlock your phone properly?
1) Download unlock software
2) Download .UNL file specifically for your IMEI
3) Connect phone to computer and make sure the activesync's icon has turned green
4) Run unlock software
5) When unlock software asks for .UNL file, browse for it, choose it
6) That's it ! It should say Unlocking done and it'll reboot
Your phone is now Sim & Cid Unlocked. If you have more questions, feel free to ask. just do what i said first then post.
Good Luck ! Hope to see everything working for u...

Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection

tatarezende said:
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
Click to expand...
Click to collapse
Hi,
Are you using Windows Xp? Cause I've gotten that error a couple of times too but it was in Vista. Try Xp if you're using Vista.

Hi!!
DONE with XP.... but now i`m affraid!! The "Green Screen" with nem OS apparently locked... this is normal? at least 3/4 minutos in the same screen.. both "patches" are applyed sucefully....
Is there anything else to do now?

Softbank X02HT App Unlock

hello...
i have 1 Softbank X02HT from Japan which came out lock to provider from softbank.. i want to unlock this phone, so i bought unlocking codes from a friend but when the codes arrived and i want to enter it but i cant figure out how to key in those codes,, ive searched a lot of forums how to enter those codes but it seems like my phone is "Counter Blocked" some says i had to flash other roms to be able to enter those codes until i read this http://forum.xda-developers.com/showthread.php?t=398945 now the problem is i cant Application Unlock my phone when i use SDA Application and i gives me error like "Phone is not unlockable"
my phones info :
CAVA100
IPL-0.04
CAVA100
SPL-1.00.0000
please help me to get through with it...
thanks...

LiquidSky said:
hello...
i have 1 Softbank X02HT from Japan which came out lock to provider from softbank.. i want to unlock this phone, so i bought unlocking codes from a friend but when the codes arrived and i want to enter it but i cant figure out how to key in those codes,, ive searched a lot of forums how to enter those codes but it seems like my phone is "Counter Blocked" some says i had to flash other roms to be able to enter those codes until i read this http://forum.xda-developers.com/showthread.php?t=398945 now the problem is i cant Application Unlock my phone when i use SDA Application and i gives me error like "Phone is not unlockable"
my phones info :
CAVA100
IPL-0.04
CAVA100
SPL-1.00.0000
please help me to get through with it...
thanks...
Click to expand...
Click to collapse
so u r able to unlock the sim or not?

cruzzmz said:
so u r able to unlock the sim or not?
Click to expand...
Click to collapse
hello...
i just able to sim unlock the phone via code after flashing this firmware http://rapidshare.com/files/14940579...0_182_Test.exe
but still i cant app unlock the phone... i want to flash WWE rom..
i tried using mtty but then it shows:
CMD>task 32
"Level=FF"
please do help me...
thanks

LiquidSky said:
hello...
i just able to sim unlock the phone via code after flashing this firmware http://rapidshare.com/files/14940579...0_182_Test.exe
but still i cant app unlock the phone... i want to flash WWE rom..
i tried using mtty but then it shows:
CMD>task 32
"Level=FF"
please do help me...
thanks
Click to expand...
Click to collapse
try the hard SPL thread ... there is a program to unlock the phone

cruzzmz said:
try the hard SPL thread ... there is a program to unlock the phone
Click to expand...
Click to collapse
thanks...
the phone is SIM Unlocked now...
but i got this error after using HardSPL-Cavalier-1.0-JockyW
thanks...

LiquidSky said:
thanks...
the phone is SIM Unlocked now...
but i got this error after using HardSPL-Cavalier-1.0-JockyW
thanks...
Click to expand...
Click to collapse
Error 270 ... U must do HardSPL first ... Pls follow instruction on the Hard SPL thread

Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40

yukster said:
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
Click to expand...
Click to collapse
Have u tried tis tool?
http://forum.xda-developers.com/attachment.php?attachmentid=91644&d=1213100403

what's the end of the story ?
these japanese guys just gone with the wind.

Maybe it's work, because I just did a test on my x02ht. I’m able to modify register through CeRegEditor after SDA_ApplicationUnlock.

Need help to Flash X02HT from JAPAN
HI,
I have been trying desperately to unlock this phone. Before I buy code I need to know it it can be unlocked. When I power on the phone a window keeps popping up with or without asking for SIM unlock code.
I tried JumpSPL and keep get an error: CreateProcess failed with errorcode =30123 - UNKNOWNERROR 0X000075ab.
I still tried HARD SPL -Cavalier 1.0 JockyW and keep getting an error :-
ERROR (270): UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
Please LiquidSky have a file that he used from rapidshare and flashed his phone successfully can anyone share with me please?
I need urgent help
Thanks

I have the same problem. I would appreciate if someone knows how to solve it.
Thanks!
Totalelectronics said:
HI,
I have been trying desperately to unlock this phone. Before I buy code I need to know it it can be unlocked. When I power on the phone a window keeps popping up with or without asking for SIM unlock code.
I tried JumpSPL and keep get an error: CreateProcess failed with errorcode =30123 - UNKNOWNERROR 0X000075ab.
I still tried HARD SPL -Cavalier 1.0 JockyW and keep getting an error :-
ERROR (270): UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
Please LiquidSky have a file that he used from rapidshare and flashed his phone successfully can anyone share with me please?
I need urgent help
Thanks
Click to expand...
Click to collapse

yukster said:
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
Click to expand...
Click to collapse
TESTED and working.......

good ..................................................