Related
I have an O2 XDA Mini S and have just purchased a pair of Motorola HT820 Bluetooth headphones. I have paired the two; however, I only get the Hands Free service (which works) but NO Wireless Audio. I have not installed any other software / drives and I am using WMP 10 Mobile to play the music.
Any help with this problem would be very much appreciated.
Thanks, Harold Clements
...Ok, I have been on this for about 4 hours now and I am starting to get a bit annoyed.
I clicked on Motorola HT820 and then went ‘Refresh’ and up popped ‘Headset’ so I ticked that and saved. I then clicked (and held) on Motorola HT820. The options that I get are Edit – Delete – Set as Hands Free. I think I should also have ‘Set as Wireless Stereo’ or something, but I don’t.
Please, has anyone any ideas?
Thanks, Harold Clements
Wirless Audio Hacks
I really could do with someone’s help!
I have read about the ‘hacks’ (zoad2p.cab, Tornado asdp, AKU2.6) but I am unsure:
a) if this is a solution to for problem / PDA.
b) what a hack is and why is it needed?
Please can someone help!
I don't know wich kind of PDA you have, as you can see everyone here calls their PDAs by their HTC's code name (mine is a universal), go to look the pictures of all the PDAs, find yours and search directly inside there, it will be much easier for you to find an answer.
One simple comment, your PDA has to have the Bluetooth high quality audio (is called be some PDAs in this way), see if your PDA does contain such feature, you have to activate it if you want to hear stereo audio, generally when you pair your phones for the first time, your PDA will show you the option already ticked, if you haven't see it, chances are that something is missing in your bluetooth profiles, go to your PDA's specific part of this forum and read, with patience and some luck, I'm sure you'll find whatever you need to get your PDA's stereo audio to work.
Most of the cases, are just the lack of the profiles or even installing another BT stack.
good luck
Thanks...
Thank you very much for your advice / reply, it was very much appreciated. It seems that my PDA is a Wizard. I will indeed search that part of this forum.
Thanks again,
Harold Clements
I don't think your phone supports A2DP profile. Correct me if I'm wrong.
Neither do i know if his phone supports it, I use to have an Ipaq 6340, it suppose that it didn't supported A2DP but with an BT stack extracted from another PDA (don't remember wich one) it worked, it didn't worked very well, it dropped audio more or less each 30 seconds for 2 seconds, someone said at that time that was processor lack of power -I didn't agree with this-, but I did no further investigation.
As far as I've understood, the main bottleneck for stereo profiles (or any deamanding profile in BT) is the radio, of course, if We don't have access to the manufacturers good information, good tools, much time and even more will is very hard to find a solution to anything, most of us do not spend lots of time with this things -it's not easy for anyone with a "normal" life-, and I'm not complaining!
It's just fine for me, the whole thing it's quite enjoyable like this, some more time spent in this way and it would become a second work.
So, may us have fun and keep an excellent forum up.
haroldjclements said:
I have an O2 XDA Mini S and have just purchased a pair of Motorola HT820 Bluetooth headphones. I have paired the two; however, I only get the Hands Free service (which works) but NO Wireless Audio. I have not installed any other software / drives and I am using WMP 10 Mobile to play the music.
Any help with this problem would be very much appreciated.
Thanks, Harold Clements
Click to expand...
Click to collapse
on the front page not 2 rows (at the moment) below this thread in really big bold letters
MOTO HT820 SKIPPING SOLVED! NEW FIRMWARE INSIDE!
which covers the issues and varioius fixes (if any) for most phones.
To be truthful, I know very little about what I am trying to do. All I know is that I can’t get the music side of the Motorola headset working.
As I said in my previous post: I have an O2 XDA Mini S (Wizard) and have just purchased a pair of Motorola HT820 Bluetooth headphones. The two paired but I only get the Hands Free service but NO Wireless Audio. I clicked on Motorola HT820 and then went ‘Refresh’ and up popped ‘Headset’ so I ticked that and saved. I then clicked (and held) on Motorola HT820. The options that I get are Edit – Delete – Set as Hands Free. I think It should also have ‘Set as Wireless Stereo’ but It don’t.
I have read about the ‘hacks’ (zoad2p.cab, Tornado asdp, AKU2.6) but I am a) unsure if this is a solution to my problem, and b) what a hack is and why is it needed?
I just really want to know how to fix my problem.
Thanks for your help,
Harold Clements
a hack is getting a device which dont support a feature to do it anyway
if htc dident make your device to support a2dp == bluetooth stereo
you maybe be able to get it to do it anyway using a hack
if any hacks works for your device
as it differs
bluetooth support is never support for all profiles bluetooth have
plus there are bluetooth version 1 - 1.1 - 1.2 and 2.0
haroldjclements said:
To be truthful, I know very little about what I am trying to do. All I know is that I can’t get the music side of the Motorola headset working.
As I said in my previous post: I have an O2 XDA Mini S (Wizard) and have just purchased a pair of Motorola HT820 Bluetooth headphones. The two paired but I only get the Hands Free service but NO Wireless Audio. I clicked on Motorola HT820 and then went ‘Refresh’ and up popped ‘Headset’ so I ticked that and saved. I then clicked (and held) on Motorola HT820. The options that I get are Edit – Delete – Set as Hands Free. I think It should also have ‘Set as Wireless Stereo’ but It don’t.
I have read about the ‘hacks’ (zoad2p.cab, Tornado asdp, AKU2.6) but I am a) unsure if this is a solution to my problem, and b) what a hack is and why is it needed?
I just really want to know how to fix my problem.
Thanks for your help,
Harold Clements
Click to expand...
Click to collapse
The zoia a2dp hack (zoa2dp.cap) is what you need, it will give you "Set as wireless stereo" but be prepared for pretty bad skipping, that has not yet been solved for all of wizards.
Also if you flash to a custom rom (Like Molski's 2.26 it'll have the patch automatically.)
I've searched around for this and can't find anything, so maybe someone can help to point me in the right direction or let me know that at least the problem is known but not fixed yet.
I can't get Wifi and Bluetooth to work on my 8525 with WM6, currently using Schap's 3.54c rom and radio version 1.48.
I have motorola s805 stereo bluetooth headphones and would like to stream radio over my work's wifi and hear it on my headphones.
The problem is Neither wifi or bluetooth work reliably when used at the same time, (no problems individually). I have even tried reducing the bit pool, but can't take it below 24 because it sounds to bad then, but it still doesn't work.
Anyone have any ideas or can at least verify you have the same problem?
I have the same issue when trying to play internet radio over wifi with my ht820 a2dp linked to the jasjam (Sleuths v2 rom). The only time i ever got a2dp and wifi streaming to work was with the widcomm bt driver that is now extinct.
Thus i have come to the conclusion that the problem is not with the hw but has more to do with the standard ms bt stack.
If anyone has found a workaround please do share
Thats a start
Thanks, that is helpful.
I remember seeing a widcomm stack thread....
http://wiki.xda-developers.com/index.php?pagename=Hermes_Widcomm_stack
I'm going to check that out, also if there is a specific rom that comes with the widcomm stack I'd be interested to know.
I find that with bluetooth turned on I can associate to my Cisco AP at all. As soon as I turn Bluetooth off it works fine.
I had hoped my issue was due to the way the particular WM6 was put together but now Im using offical Dopod and it is the same.
Widcomm stack
Well I found this
http://www.htc-devs.com/uploads/Univ...m_bt_stack.CAB
at the end of the Widcomm stack for Hermes development thread.
I'm not sure where it came from, but I installed it and so far I can use IE while connected to my home wireless network, and listen to music on my headphones.
The com manager will not show bluetooth as being on, but go to settings-bluetooth and you can re-pair.
Currently I'm getting some hiccups, but its working at least. I'll keep you updated and I would still like to see a rom that incorporates this stack so that the com manager works right.
It also changes the headset icon on the top bar.
Streaming!
I'm streaming SomaFM with no problems!
AVRCP problems
I didn't notice this at first, but after the widcomm stack has been installed the AVRCP functions don't work... so Im going back.
AVRCP
It works in WMP, just not audiomanager anymore.
Bricking Blog
Pretty much what this thread has turned into.
If you install that cab above, don't uninstall it, you'll get bricked.
helpful reading
I have the Motorolla S9 bluetooth A2DP stereo headset.
I also have the Hero currently running VillainROM 3.4 but I've been trying to run a bt connection for A2DP media playback with almost all Android 2.1 ROMS with same results.
The phone pairs fine but once I start playing any mp3 headset disconnects and reconnects at random.
I should mention that bluetooth works great in my car with the stock stereo system for simple phone calls.
I searched the entire forum but couldn't find anyone else with this issue ... Modaco 3.1 people report bt stereo playback to be working fine .. I think this is a 2.1 issue as VillainROM 3.3 and 3.4 and BeHero and other 2.1 based roms have this issue.
please HELP
Hello rafynet
i had same problem and i have solved with this method:
your phone must be rooted
there is a file in /etc/bluez/audio.conf
copy that to your pc.Change the lines
from
-----------------------------
Enable=Source,Control,Sink
Disable=Headset,Gateway
-----------------------------
to
-----------------------------
Enable=
Disable=Headset,Gateway,Source,Control,Sink
-------------------------------------------
save it.
copy the changed file back to /etc/bluez/
I have tried this solution in all rom that i have tested and all work well for me, watch the entire article:
Issue 3960: Bluetooth issues with car systems in Android 1.5 / 1.6
I'm sorry, i can't post this link on forum!!
search it in google.
sorry for my english!
I'm waiting your feedback!!
I hope this solution works well for you. Try this!
your solution helped a little bit ... but bluetooth connection still drops and re-connects all the time ... it's very annoying.
I'm fairly sure this will be fixed when we get the official Hero 2.1 update.
I had noticed the same thing with my Motorola T505 ROKR handsfree adapter. Worked fine in 1.5, but in 2.1 it would disconnect every 30 seconds or so, then reconnect.
However... I've just got a new car stereo (Pioneer DEH-P6100BT) and it actually works *BETTER* in VillianROM 4.0 than it did in Modaco 3.2. In Modaco, it would only connect to "phone audio" and not "media audio," and I had to go into the Android settings and enable "media audio" each time I got in my car. With VillainROM, it connects automatically and it doesn't disconnect. Also, I've found that in 2.1, when listening to BT Audio, the music doesn't get interrupted by notification sounds, which I hated about 1.5.
I've had nothing but problem with a2dp on the hero, and it's probably the feature I need to work the most. I tried a whole host of 1.5 and 2.1 roms but none of them would consistantly connect to my pioneer deh-p700bt. I read somewhere that it's been a problem for lots of people since the 2.73.x series of updates, so I downgraded to the T-Mobile 1.76.110.6 stock rom and it's worked perfectly for me ever since! I'll have to stick with that one for now and hope it gets fixed in the upcoming 2.1 update
Hi,
I have a question about this subject :
i have a bluetooth car stereo with phone handfree inclued.
With all ROMs I tried (and a tried a lot...)
the phone handsfree always worked
Depend of the ROM, some items were available or not : (battery indicator or signal level indicator for example)
With only one ROM (and I don't remember which one), I could transfer my contact list from the phone to the car stereo system (with bluetooth).
Does someones knows if this feature will be again available into the next ROM (official or not) ?
Thx
PS : sorry for my bad english
yan74s said:
Hi,
I have a question about this subject :
i have a bluetooth car stereo with phone handfree inclued.
With all ROMs I tried (and a tried a lot...)
the phone handsfree always worked
Depend of the ROM, some items were available or not : (battery indicator or signal level indicator for example)
With only one ROM (and I don't remember which one), I could transfer my contact list from the phone to the car stereo system (with bluetooth).
Does someones knows if this feature will be again available into the next ROM (official or not) ?
Thx
PS : sorry for my bad english
Click to expand...
Click to collapse
The Android SDK did not include a bluetooth API in 1.5, but it is included in 2.1. I would guess we'll see a big improvement with the official 2.1 update.
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
e-thug said:
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
Click to expand...
Click to collapse
Hmmmm .... I don't believe you ever stated what type of headset you are trying to get working here? I find your problem to be very strange, even though WinMo does seem to be lacking in a lot of different areas, audio streaming via bluetooth stereo headset is definitely not a problem I have encountered. It even streams flawlessly through my 5.1 hooked to my pc via a crappy 8 buck bt dongle and still sounds excellent. Have you considered that the problem may lie with your bt headset itself?
Also, when you say that you installed latest "release" from AT&T (from a thread on this site), what exactly do you mean? I am running the "unofficial" leaked rom from AT&T on mine and I just paired my Motorola S9 stereo headset and it is playing great for me. You also may want to try using some different software, give S2P (Slide 2 Play) a try and see if you have different results. That's what I am using right now, but I have used TCPMP to play a few xVids through my headset and have had no problems.
The problem is not in the head unit. 25 other phones can't all be wrong. I have no problem using my bluetooth headset. That is probably why you don't see the problem. Anything more complex than a headset will not work with this release. The problem lies within the phone as soon as it displays a notification (which, of course I cannot disable) which reads, "The connected Bluetooth headset does not support volume adjustment from the device. Adjust volume on the headset itself."
That message is the kiss of death. So basically any Bluetooth head unit will not work with this phone? Sounds like shoddy programming to me. Yes, I am using the "leaked" release. I really don't think this release will ever see the light of day. Its horrible! You cannot disable notifications (I don't need to know when my text messages were sent successfully), and it looks like whenever I get a system notification, any program I am using crashes immediately. Like I said before, as soon as I get a notification, I lose the Bluetooth connection (which is like a split second before the notification comes up). I highly doubt this "leaked" copy will ever see the light of day, officially (unless AT&T and HTC do absolutely zero testing on it).
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
My Tilt 2 works absolutely fine with all my BT devices, including 2 Motorola headphone sets and my Sony Xplod head unit in my truck.
e-thug said:
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
Click to expand...
Click to collapse
I was mis-understanding you about the head unit, I did think you were talking about a headset. Sorry bout that, my Mustang doesn't have built-in BT so I have to use a Motorokr t505 for those chores. It works well but it does give me the same message that you are getting about "volume can't be cotrolled etc" but I can dismiss it and carry on without any problems.
but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
Click to expand...
Click to collapse
Since you don't need your phone for calls, just get Sirius or XM. Ya know, considering you only stream music through the phone..
Did you try the BT headset or head unit with the original stock ROM before you flashed the "leaked official" ROM?
Seems like you might have a couple random issues, with the BT issues and the system notifications crashing programs. I haven't flashed the leaked ROM, but I do know that many random issues with cooked ROMs can often be cleared up by running Task29, which completely wipes the phone memory before you flash a new ROM. I think you will need to HardSPL before you run Task29. Might be worth a try, sometimes fragments of the old ROM interfere with the new one, and cause some bugs.
Bluetooth protocols can be implemented differently by different manufacturers.
I know of many people including myself who have NO PROBLEM with the tilt 2 and different Bluetooth products INCLUDING car radios.
I am using the "new" AT&T ROM and have no difficulties.
Clearly your pissed but your subject is wrong. I would suggest changing to "Worthless as $HIT to ME"
I think my problem is that I am getting notifications which seem to be killing my connection. Is there a way to turn all notifications OFF? The only ones I care about are missed calls, incoming SMS and maybe a birthday. I would like to try to kill the notifications first because I think this may solve my problem
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/06/24/enable-or-disable-the-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/06/24/tweak-and-configure-how-notifications-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
redpoint73 said:
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/...he-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/...cations-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
Click to expand...
Click to collapse
Thanks I will try these out and report back
For the record my head unit is a JVC KD-BT11 and I have never had any kind of problem pairing any other phone
Somebody else just posted a very similar issue, and found the app hAndyUtils to be helpful:
http://forum.xda-developers.com/showthread.php?t=741311
I think hAndyUtils might just be a app-based way to make the reg edits I posted earlier. But give it a try.
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack. (Just as an aside, on all my past phones, there were people bemoaning the the fact that it had MS, and trying to replace it with the Widcomm, so I am getting a real chuckle out of folks complaining about the Widcomm and wishing for MS )
In any case, the utilities (Blue music toggle etc...) that used to work for me to toggle between streaming in stereo and plain phone qulity no longer work. However, all my stereo headsets (I own three different brands/pairs) all work perfectly with the Tilt 2. And stay connected and streaming all day.
By the way, coming on a forum that is full of people helping each other and using profanity, anger and threats, is not the most conducive way to get your questions answered. The odds are that the problem you are having is already solved somewhere among the 6+ million posts in this forum. I do not know where or I would post it for you, but it is probably out there. Good luck. And if you find it, please post the link to the answer back here so that other serchers will find it too.
maybe it can come from the phone itself
i had a rhodium for almost a year and never got my motorola headset ht820 to work well enough for me to use it... (more skips than music...cant move my head without a skip)
i flashed to a NRG rom before trying my headset...i tried eveything as far as ref setting, different radios...even flashed my ht820...
no improvement...
then my phone fell in water not so long ago...got another rhodium same model (european)...and it worked perfect out the box on stock rom i can go in a different room than my device and still hear music with no skips...and it still does with nrg rom and latest radio...
so my guess is maybe some actual devices have bad bluetooth hardware ???
I have the Motorola S9 and the HT820 and both work absolutely fine on my Tilt 2.
yatrg said:
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack.
Click to expand...
Click to collapse
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
e-thug said:
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
Click to expand...
Click to collapse
Did you ever try the solution in this thread? It fixed a lot of issues people were having with bluetooth car kits. Maybe it will work for you: http://forum.xda-developers.com/showthread.php?t=591322
The solution source is here: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html
And here is the solution. You need a registry editor to do this:
1. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
2. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change (or add if not there) DisableReopenAudio to 0 (default is 1)
3. Reboot device
You may also want to do the A2DP quality registry edit: Add a DWORD value of LineSpeed to HKLM\Software\WIDCOMM\Plugin\AV\ with a value of 320.
Give it a try, it may work for you.
I will give this a try and report back. Thank you very much for the response!
No luck. And my bdaddr keeps resetting to a binary value when I reset the phone
bluetooth not pairing bluetooth car audio. Dont know what to do. I tried everything!!!
How about you go back to using stable rom instead of a beta ICS rom? Will save you all the trouble
I want to move forward ;-). And once I have priviledge to help with the developement I will.
Dang, I must be so very conservative when I say that progressive opening of two threads about a same issue on a same day is idiotism beyond belief.
Sent from my HTC Desire using Tapatalk
erklat totally agree. I must admit that I am a rookie. Will not happen again. However anyone up there that can guide me on the following:
-My bluetooth car kit says no compatible devices has been found. (eventhough I have my phone visible)
-Find the car bluetooth on my device but it tells me that my car rejected to pair
????
Note Bluetooth apps seems not to help the issue.
extensive google research does not give any answer. Should I leave it as a mistery?
I am wondering is it is because car bluetooth out of date. the car is only 2 years old
Seems strange not having found anyone posting an explanation of the issue
anyone there?
I did it from my phone, not from car. No problems luckily, because this was a must. Otherwise I should have returned to GB, so old
Can you be more specific?