Related
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
e-thug said:
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
Click to expand...
Click to collapse
Hmmmm .... I don't believe you ever stated what type of headset you are trying to get working here? I find your problem to be very strange, even though WinMo does seem to be lacking in a lot of different areas, audio streaming via bluetooth stereo headset is definitely not a problem I have encountered. It even streams flawlessly through my 5.1 hooked to my pc via a crappy 8 buck bt dongle and still sounds excellent. Have you considered that the problem may lie with your bt headset itself?
Also, when you say that you installed latest "release" from AT&T (from a thread on this site), what exactly do you mean? I am running the "unofficial" leaked rom from AT&T on mine and I just paired my Motorola S9 stereo headset and it is playing great for me. You also may want to try using some different software, give S2P (Slide 2 Play) a try and see if you have different results. That's what I am using right now, but I have used TCPMP to play a few xVids through my headset and have had no problems.
The problem is not in the head unit. 25 other phones can't all be wrong. I have no problem using my bluetooth headset. That is probably why you don't see the problem. Anything more complex than a headset will not work with this release. The problem lies within the phone as soon as it displays a notification (which, of course I cannot disable) which reads, "The connected Bluetooth headset does not support volume adjustment from the device. Adjust volume on the headset itself."
That message is the kiss of death. So basically any Bluetooth head unit will not work with this phone? Sounds like shoddy programming to me. Yes, I am using the "leaked" release. I really don't think this release will ever see the light of day. Its horrible! You cannot disable notifications (I don't need to know when my text messages were sent successfully), and it looks like whenever I get a system notification, any program I am using crashes immediately. Like I said before, as soon as I get a notification, I lose the Bluetooth connection (which is like a split second before the notification comes up). I highly doubt this "leaked" copy will ever see the light of day, officially (unless AT&T and HTC do absolutely zero testing on it).
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
My Tilt 2 works absolutely fine with all my BT devices, including 2 Motorola headphone sets and my Sony Xplod head unit in my truck.
e-thug said:
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
Click to expand...
Click to collapse
I was mis-understanding you about the head unit, I did think you were talking about a headset. Sorry bout that, my Mustang doesn't have built-in BT so I have to use a Motorokr t505 for those chores. It works well but it does give me the same message that you are getting about "volume can't be cotrolled etc" but I can dismiss it and carry on without any problems.
but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
Click to expand...
Click to collapse
Since you don't need your phone for calls, just get Sirius or XM. Ya know, considering you only stream music through the phone..
Did you try the BT headset or head unit with the original stock ROM before you flashed the "leaked official" ROM?
Seems like you might have a couple random issues, with the BT issues and the system notifications crashing programs. I haven't flashed the leaked ROM, but I do know that many random issues with cooked ROMs can often be cleared up by running Task29, which completely wipes the phone memory before you flash a new ROM. I think you will need to HardSPL before you run Task29. Might be worth a try, sometimes fragments of the old ROM interfere with the new one, and cause some bugs.
Bluetooth protocols can be implemented differently by different manufacturers.
I know of many people including myself who have NO PROBLEM with the tilt 2 and different Bluetooth products INCLUDING car radios.
I am using the "new" AT&T ROM and have no difficulties.
Clearly your pissed but your subject is wrong. I would suggest changing to "Worthless as $HIT to ME"
I think my problem is that I am getting notifications which seem to be killing my connection. Is there a way to turn all notifications OFF? The only ones I care about are missed calls, incoming SMS and maybe a birthday. I would like to try to kill the notifications first because I think this may solve my problem
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/06/24/enable-or-disable-the-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/06/24/tweak-and-configure-how-notifications-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
redpoint73 said:
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/...he-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/...cations-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
Click to expand...
Click to collapse
Thanks I will try these out and report back
For the record my head unit is a JVC KD-BT11 and I have never had any kind of problem pairing any other phone
Somebody else just posted a very similar issue, and found the app hAndyUtils to be helpful:
http://forum.xda-developers.com/showthread.php?t=741311
I think hAndyUtils might just be a app-based way to make the reg edits I posted earlier. But give it a try.
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack. (Just as an aside, on all my past phones, there were people bemoaning the the fact that it had MS, and trying to replace it with the Widcomm, so I am getting a real chuckle out of folks complaining about the Widcomm and wishing for MS )
In any case, the utilities (Blue music toggle etc...) that used to work for me to toggle between streaming in stereo and plain phone qulity no longer work. However, all my stereo headsets (I own three different brands/pairs) all work perfectly with the Tilt 2. And stay connected and streaming all day.
By the way, coming on a forum that is full of people helping each other and using profanity, anger and threats, is not the most conducive way to get your questions answered. The odds are that the problem you are having is already solved somewhere among the 6+ million posts in this forum. I do not know where or I would post it for you, but it is probably out there. Good luck. And if you find it, please post the link to the answer back here so that other serchers will find it too.
maybe it can come from the phone itself
i had a rhodium for almost a year and never got my motorola headset ht820 to work well enough for me to use it... (more skips than music...cant move my head without a skip)
i flashed to a NRG rom before trying my headset...i tried eveything as far as ref setting, different radios...even flashed my ht820...
no improvement...
then my phone fell in water not so long ago...got another rhodium same model (european)...and it worked perfect out the box on stock rom i can go in a different room than my device and still hear music with no skips...and it still does with nrg rom and latest radio...
so my guess is maybe some actual devices have bad bluetooth hardware ???
I have the Motorola S9 and the HT820 and both work absolutely fine on my Tilt 2.
yatrg said:
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack.
Click to expand...
Click to collapse
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
e-thug said:
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
Click to expand...
Click to collapse
Did you ever try the solution in this thread? It fixed a lot of issues people were having with bluetooth car kits. Maybe it will work for you: http://forum.xda-developers.com/showthread.php?t=591322
The solution source is here: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html
And here is the solution. You need a registry editor to do this:
1. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
2. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change (or add if not there) DisableReopenAudio to 0 (default is 1)
3. Reboot device
You may also want to do the A2DP quality registry edit: Add a DWORD value of LineSpeed to HKLM\Software\WIDCOMM\Plugin\AV\ with a value of 320.
Give it a try, it may work for you.
I will give this a try and report back. Thank you very much for the response!
No luck. And my bdaddr keeps resetting to a binary value when I reset the phone
can anyone tell me if I can update the Bluetooth in my HTC Desire or have more profiles. the phone is branded o2 but can be rooted. I dont want to change anything else in the ROM just make the bluetooth connect automaticaly & reliably to the car.
There are newer software builds available but have no mention of updating bluetooth.
Ther are no OTA updates available.
Software Number is 2.14.207.1
Andriod 2.2
Thanks for any advice in advance.
Trampsdad
Can't you just pair the 2 devices together? I personally don't use Bluetooth so no idea on that aspect. Also, the software is so out of date because o2 cba to release and update. There are major updates since yours. It might be worth considering to root so then you can flash a newer ROM, or infact, you don't need to root and just use an RUU. With the newest software. No need to root it then and less chance of it mess up.
Hope this helps
I still have some strangeness with Bluetooth. From what I read there are some updates in Honeycomb and maybe gingerbread. But I don't have a feeling what you are looking for is in FroYo
Sent from my HTC Desire using XDA App
Well I have a Kenwood Headunit with Bluetooth and the connection to that using stock Froyo and LeeDroid showed some interesting results. Gaps in the phonebook for instance. However, putting a 2.3 ROM (Ginger Villain) sorted that out, its fine now.
Bluetooth depends on the other device too.
What exactly is the problem you are having?
What Car do you have?
What Bluetooth system is installed (is it standard)?
I have used my desire in a number of cars (Vauxhall, Ford, BMW) without any isses with pairing, using the Phonebook,etc. is a different matter.
Personally, I have just received a new BMW 528i, and it doesn't get on well with my Desire at all.
It pairs OK and can use both the phone and music, but when I leave and return to the car, it just refuses to auto-connect again, and I have to go through the pairing procedure again.
Oh, except one - the time I went back to the garage to 'complain' about it and ask for advice, when it worked perfectly. Until I got home again!
Have experimented with my old Nokia N85, and that works fine, too. So it's either the Desire or an incompatibility between it and the car.
Oh, my Desire is running MCR r9 (FroYo) at the moment. Are there known issues with this? Info on any Bluetooth updates I could apply would be gratefully received!
i have to enter my pairing code every time i connect my bt headset - i took this to be a quirk for the moment - hoping its fixed in 2.2.2/2.3.x etc.
Lothaen said:
i have to enter my pairing code every time i connect my bt headset - i took this to be a quirk for the moment - hoping its fixed in 2.2.2/2.3.x etc.
Click to expand...
Click to collapse
Im having this same problem also with a Pioneer Head Unit in my car.
Bluetooth has always been troublesome as it doesn't auto connect. It will connect if I either manually click on "Pioneer Head Unit" or turn Bluetooth off and on (which I automate with tasker).
The pin thing is new and happens with all roms I have tried except LeeDroid, (which I prefer not to use as I don't like sense much). Leedroid still has the auto connect problem.
daveaus said:
Bluetooth has always been troublesome as it doesn't auto connect. It will connect if I either manually click on "Pioneer Head Unit" or turn Bluetooth off and on (which I automate with tasker).
Click to expand...
Click to collapse
Some good hints there - thanks!
I can connect far more reliably if I initiate the connection from the phone than from the car.
Likewise, if BT is switched off on the phone and then turned on after the car is on, then it sometimes works, too. Certainly don't need to re-pair anywhere near as often.
Can I ask how you use Tasker to automate the BT switching? I've not used that (I use Setting Profiles instead which I understand does roughly the same thing), so am curious what kind of rule you have that's useful for this.
Cheers.
TheMegaMan_ said:
Can I ask how you use Tasker to automate the BT switching? I've not used that (I use Setting Profiles instead which I understand does roughly the same thing), so am curious what kind of rule you have that's useful for this.
Click to expand...
Click to collapse
I use the following rules:
On wifi connection turn off bluetooth
On wifi disconnection wait 30 seconds and turn bluetooth on.
If not wifi connected & not bluetooth connected turn bluetooth off and on every 5 minutes.
If not wifi connected & not bluetooth connected and incoming call turn bluetooth off and on.
If not wifi connected & not bluetooth connected when display switched on turn bluetooth off and on.
The battery drain hasn't been a problem, if I go away or won't be using my car for a while I disable tasker. Of course this doesn't help when it keeps asking for the pin.
daveaus said:
I use the following rules:
Click to expand...
Click to collapse
Ah, cunning! Of course...toggle it when it's not already connected. Prifile Settings doesn't seem to let me toggle things like BT directly, although I could probably do so by setting some appropriate profiles.
I'll have to experiment...or just buy Tasker, instead!
daveaus said:
Of course this doesn't help when it keeps asking for the pin.
Click to expand...
Click to collapse
True, but so far in my case, I've only had that when I've tried to initiate connection from the car. Hopefully your trick will mean I don't need to do that so often.
Anyone found a gingerbread rom (or any rom!) with improved Bluetooth?
I have found the bluetooth to be terrible on the desire. I have got about 3 devices that my phone just refuses to pair with.
Currently I am trying to get it to connect with an Elm 327 Obd scanner. No luck, it asks for a pin, then I enter the pin, but it immediately rejects it.
I have tried oxygen rom, leedroid, stock froyo, everything...
I also have a parrot hands free kit that does the same thing, asks for pin, then does nothing...
Something makes me think it might be the radio or something. Except that my phone DOES connect with my scala motorbike helmet... So frustrating
Sent from my HTC Desire using XDA App
After searching this forum there is no thread on Bluetooth issues connectivity.
For a wile now i been searching the net and different sites for a fix between my phone and my car bluetooth. Before the epic i had a windows phone and the connectivity was fine including all the phonebook would load up and everything the system was build to do. With Android Epic i been having issues. Sometimes I cant connect to the car and other I am able to connect but phonebook wont load.
With all the Geniuses in the website i am sure someone can come up with a fix.
I figured i open this thread hoping we can find a final fix to retire this problem.
If it helps I am running the latest Viper Rom with Genocide kernel at 1.2ghz
However the rom did not change the statues of my issue.
Any help would be appreciated.
Thanks
I also have connectivity issues with bluetooth, in my case the car has A2DP allowing for music to be played over the car's stereo. It cuts out so much that it is completely useless for music. I mostly listen to podcasts but Pandora would be nice. However it cuts out so much that it isn't worth it. So if anyone does have a solution. To me though I've tried so many kernels, and roms to no avail that I'm pretty sure taht the software Samsung has shipped has faulty drivers. By the way it also seems that the cut outs occur when switching towers, however I could be wrong.
I use this in my car: http://us.kensington.com/html/14484.html
It may cut out every 45 seconds or so but it's the only thing I've used. Got it on sale for $20.
I've got a pair of a2dp bluetooth headphones that I use to listen to podcasts via my Epic. I've had zero problems with those (using DK28 atm, for the record). So I don't think there's a hardware problem with the Epic's bluetooth.
If we're going to get some troubleshooting done, we should get a bunch of details from everyone. Like exactly what bluetooth hardware they're using, and what roms they're running.
thezero4 said:
I also have connectivity issues with bluetooth, in my case the car has A2DP allowing for music to be played over the car's stereo. It cuts out so much that it is completely useless for music. I mostly listen to podcasts but Pandora would be nice. However it cuts out so much that it isn't worth it. So if anyone does have a solution. To me though I've tried so many kernels, and roms to no avail that I'm pretty sure taht the software Samsung has shipped has faulty drivers. By the way it also seems that the cut outs occur when switching towers, however I could be wrong.
Click to expand...
Click to collapse
Does everything cut out, or just Pandora? If it's just Pandora and other apps that need data connection, it might not be a bluetooth problem as much as a data connection problem.
I would suggest testing it by trying the car bluetooth with something that requires no data connection at all, like pre-downloaded podcasts.
I am talking about connectivity issues with in stock car bluetooths.
this problem is big many people been having this issue and there is a list of stock bluetooth cars that android wont pair with. I had the touch pro 2 for sprint with windows system and it worked fine in my car bought the epic and there we go. Now looks kind of bad that i would need to get an aftermarket piece to listen to bluetooth calls and load up the phonebook from android to my car.
Windows got it right even though i would never go back to a windows phone so i know there is something that android messed up here
Below i will put some links to show you how there is A LOT of people that been having this issue.
http://code.google.com/p/android/issues/detail?id=3960
http://www.google.com/#q=android+bl...start=0&sa=N&bav=on.1,or.&fp=3f40f95b1b9c7c0d
I have a 2006 Dodge Durango. It has Bluetooth. My old phone, a Samsung flip phone would connect without issue. My new phone, a Samsung Captivate, will connect most of the time, but often times, once it connects, it drops the call.
I understand this is an Epic thread, but I thought I would add my input as I am having similar problems (and this came up on my search).
If I understand you correctly, you connect some of the time and sometimes not.
Regardless, if your phone is rooted you might wanna try this.
I had a lot of issues with my bluetooth after upgrading to froyo and tried a lot of fixes including wipe3x and odin to stock....this is the one that worked for me.
http://forum.xda-developers.com/showpost.php?p=12120496&postcount=1392
Ensure that you first
- delete the car from your phone,
- delete the phone from your car,
- disable bluetooth,
- delete the file,
- CHANGE YOUR BLUETOOTH DEVICE name,
- restart,
- reenable bluetooth
- re-pair your phone with the car.
HI PEOPLE
SINCE I HAVE UPGRADED TO 2.2.2 I'M WITNESSING SERIOUS ISSUES , STARTING OF LAG AND THEN SLOW AND MEMORY AND ETC.
BUT THIS ONE IS DAMN CRAZY , THIS IS BLUETOOTH ISSUE.
AS ALMOST EVERY DEFY HOLDER KNOWS THAT U CAN NOT SEND SONGS AND MUSIC STUFF THROUGH BLUETOOTH , AND U NEED ADDITIONAL APP TO SEND THE FILES.
THE APP IS BLUETOOTH FILE TRANSFER WAS WORKING GOOD BUT NOW SUDDENLY IT STOPS SENDING AND SAYS TRANSFER COMPLETED WITHOUT ANY PROCESS OF IT.
ANY SUGGESTION WOULD BE REALLY APPRECIATED!!!
yes it happenned and now fixed with ES FILE EXPLORER app. and it supports unraring the files too.
this app sending audio files as audio/*.
and it's not making ports for bluetooth. so far succsseful.
it has root options for superiours.
so if u like it just download it from the market.
what happened xda no one has solution for this matter?
everyone checking and no one answering.!!!!!!!!!!?????????????
I just have two suggestions for you:
1. NEVER WRITE ALL CAPS! It's like constantly yelling at someone.
2. Never expect an answer. This is a community of volunteers that help you if they can, not of people that should help you!
Have you wiped your phone? They sometimes say that you should wipe your phone after an update. Give it a try, try to get the phone to a state as fresh as possible.
Cheers!
thanks man ,
i'm on it.
SWAT AXEL said:
I'M WITNESSING SERIOUS ISSUES
Click to expand...
Click to collapse
This is not the only BT problem, BT headsets do not work properly either!
I have tested ALL possible ROM's and none work! I now have the famous CyanogenMod 7, latest nightly build and no luck.
BT headsets only work as half-duplex !! Can you fuc'en imagine! WTF?! The other person can not hear your voice, while he speaks or some other backround noise comes from he's end.
I have Jabra Wave, which is awesome and it works with all other phones, Nokia that is. I have read on some forum that this is Motorola policy to prevent use of other than motorola headsets, WTF!!
I'm guessing this problem comes from the BT chip firmware that flashing andoid can not reach or change.
We seriously need a bluetooth firmware patch / hack to DEFY, and other motos as well!
I'm willing to donate some money to who ever can fix this!
[edit]Iqua Smart Badge Bluetooth Headset does not work neither, it keeps beeping 5 sec intervals![edit]
Um.. I have a Nokia stereo headset, works full duplex and plays music in stereo. I've had other issues but now fixed.
I have BT problems with my Audi carkit. Could this be related to the problems you're experiencing?
Sometimes I have disconnects when a phonecall is in progress, sometimes I get an error on my car screen saying that the phone is not supporting some function, but when I try again, it works...
Any ideas?
I contacted Audi, and they are "suggesting" to buy another phone
GunterO said:
I have BT problems with my Audi carkit. Could this be related to the problems you're experiencing?
Sometimes I have disconnects when a phonecall is in progress, sometimes I get an error on my car screen saying that the phone is not supporting some function, but when I try again, it works...
Any ideas?
I contacted Audi, and they are "suggesting" to buy another phone
Click to expand...
Click to collapse
Sometimes i have the same problem but we re install bluetooth file transfer and i am ok
Guys thanks for sharing the problems of this issue but so far i can not even send an image or a video through share which is built in the OS.
and regarding the Bluetooth file transfer app it's making it 30 ports for no reason.
and here i am, it's stopped sending the whole files even now i'm trying to wipe the data and reset and it might helps.
Not sure anyone will be able to help with this appreciate its a long shot, i've bought a Garmin Vivosmart fitness tracker and it connects to the phone via Bluetooth, now it all works mint except if i go out of range with the bluetooth the phone and garmin are supposed to reconnect automatically but it doesn't i have to unpair and then repair which isn't the end of the world but is a pain in the backside, looking on the garmin forums lots of people with M8's saying the same so there seems to be an issue with the way HTC - Garmin bluetooth works, some phones seem to work perfect (as in other android phones) so it doesn't seem a generic android-garmin issue, just wondering if anyone has had the same issue with any other bluetooth equipment and managed to find a cure ?
also if anyone know if custom roms mess about with bluetooth and the way it works, tempted to try an AOSP rom or CM to see if the bluetooth works properly but i do like sense so would prefer to stick with what i got, using Insertcoins Sense 7 rom, might go back to official sense 6 and see if that works also...
thanks for any suggestions...
wakers said:
Not sure anyone will be able to help with this appreciate its a long shot, i've bought a Garmin Vivosmart fitness tracker and it connects to the phone via Bluetooth, now it all works mint except if i go out of range with the bluetooth the phone and garmin are supposed to reconnect automatically but it doesn't i have to unpair and then repair which isn't the end of the world but is a pain in the backside, looking on the garmin forums lots of people with M8's saying the same so there seems to be an issue with the way HTC - Garmin bluetooth works, some phones seem to work perfect (as in other android phones) so it doesn't seem a generic android-garmin issue, just wondering if anyone has had the same issue with any other bluetooth equipment and managed to find a cure ?
also if anyone know if custom roms mess about with bluetooth and the way it works, tempted to try an AOSP rom or CM to see if the bluetooth works properly but i do like sense so would prefer to stick with what i got, using Insertcoins Sense 7 rom, might go back to official sense 6 and see if that works also...
thanks for any suggestions...
Click to expand...
Click to collapse
It worked fine for me with KitKat.
Friday evening I upgraded to LolliPop. (Did a clean install, no data restore from backup)
Since then I have the same problem. Once you lose your Bluetooth connection it won't reconnect anymore.
You have to unpair and the repair in order to be connected again. A real pain in the ass, as I use it only for the notifications on the bracelet.
I have had a Vivosmart since the week they came out. I had a lot of the BT issues the first few months (mainly due to their software being released before it was really production ready) but has been fine since. I'm rooted and have ran a few different roms without an issue. Currently I'm using SkyDragon's Sense 7 rom. I haven't had to pair to my phone due to disconnects for at least a couple months. Are you pairing from with-in the Connect app? At one time the pairing was done via the regular android BT devices but they got rid of that and now pair from the app only. So technically your Vivosmart shouldn't ever show up on the list of installed/connected BT devices because it's only paired from the Connect app. I'm sure you've been on the garmin forum but if you haven't or someone else reading this hasn't it's here https://forums.garmin.com/forumdisplay.php?478-vivosmart. I've seen posts over there about m8 users having problems but don't remember reading if anyone was able to get the problem fixed and what they did. It doesn't make sense that it works for some (like me).
Hello,
I have same problem with Garmin Fenix 3. Apparently there is some bug in HTC ONE M8 Android 5.0.1
I am able to connect and connection is quite stable but watch wont reconnect automatically.
Usually it will reconnect once you reset BT on phone and than on watch. But its quite annoying so I am also looking for solutions. Any idea? Ive tried to add watch to trusted device under smart lock but its not working either. I know most Garmin devices worked on previous version of android on HTC ONE M8 but with Lollipop its bugged..
wakers said:
Not sure anyone will be able to help with this appreciate its a long shot, i've bought a Garmin Vivosmart fitness tracker and it connects to the phone via Bluetooth, now it all works mint except if i go out of range with the bluetooth the phone and garmin are supposed to reconnect automatically but it doesn't i have to unpair and then repair which isn't the end of the world but is a pain in the backside, looking on the garmin forums lots of people with M8's saying the same so there seems to be an issue with the way HTC - Garmin bluetooth works, some phones seem to work perfect (as in other android phones) so it doesn't seem a generic android-garmin issue, just wondering if anyone has had the same issue with any other bluetooth equipment and managed to find a cure ?
also if anyone know if custom roms mess about with bluetooth and the way it works, tempted to try an AOSP rom or CM to see if the bluetooth works properly but i do like sense so would prefer to stick with what i got, using Insertcoins Sense 7 rom, might go back to official sense 6 and see if that works also...
thanks for any suggestions...
Click to expand...
Click to collapse
G'day wakers,
I have had exactly the same problem with my m8. I also have only used insertcoin rom which may be part of the problem as I have an identical m8 with stock lollipop (never unlocked or rooted) and it has no problems with the vivosmart or Garmin Fenix BLE connection.
I have since sold my m8 and traded up to an m9, which is still stock, but I'm reluctant to flash custom Rom as the Bluetooth works perfectly... On the other hand, stock roms drive me mental with bloatware and ads.
If you try another Rom I'd be very interested to hear how you go...as it may give me some confidence to unlock my brand new m9.
Cheers.
great_lumbuey said:
G'day wakers,
I have had exactly the same problem with my m8. I also have only used insertcoin rom which may be part of the problem as I have an identical m8 with stock lollipop (never unlocked or rooted) and it has no problems with the vivosmart or Garmin Fenix BLE connection.
I have since sold my m8 and traded up to an m9, which is still stock, but I'm reluctant to flash custom Rom as the Bluetooth works perfectly... On the other hand, stock roms drive me mental with bloatware and ads.
If you try another Rom I'd be very interested to hear how you go...as it may give me some confidence to unlock my brand new m9.
Cheers.
Click to expand...
Click to collapse
Cheers for the reply i might try a few different rom's i presumed that lollipop was the issue from what your saying maybe not then i'll let you know...
I have any M8 stock lollipop and vivosmart. When vivosmart go out of range lose connection. When vivosmart come Back near smartphone, if I want to connect it, i must switch off Bluetooth and switch on manually.
It is not auto.
Can you help me?
Thank you
Inviato dal mio HTC One_M8 utilizzando Tapatalk
I'm experiencing an even worst problem with no pairing at all with my fenix 3 and Garmin Connect with Cyanogenmod 12.1 .
I've done the test with a Samsung SII, Oneplus X and Oneplus One. All pairing fail and all with Cyanogenmod 12.1
It's working well with a Samsung Galaxy S5 ! So if one Cyanogenmod developper is reading this, can you please let us know if this bug is known, or if you can log it, and i can help some troubleshooting as well.
Samyterje said:
I'm experiencing an even worst problem with no pairing at all with my fenix 3 and Garmin Connect with Cyanogenmod 12.1 .
I've done the test with a Samsung SII, Oneplus X and Oneplus One. All pairing fail and all with Cyanogenmod 12.1
It's working well with a Samsung Galaxy S5 ! So if one Cyanogenmod developper is reading this, can you please let us know if this bug is known, or if you can log it, and i can help some troubleshooting as well.
Click to expand...
Click to collapse
Solution found on my side by realizing that one dialog box is not scaled in Garmin Connect and so the "yes" button is not visible in material design. I've understood this by rolling back to Cyanogenmod 11 and see the process.
Workaround is to use a language with shorter words like english. My initial set was in French. So if it can help somebody else with Garmin Connect, use it