PLEASE PLEASE Help Revive my phone - Upgrading, Modifying and Unlocking

I have just updated to WM 2005 and get this message Device Authentication failure. Please Contact the product manufacturer, please provide your device ID 0062667000.... how can i get my phone working again. Can someone please provide me with detailed in struction PLEASE
I have an Imate Pocket PC Phone Edition, i hope that helps. I only have a 1 gig Sd card and the Imate Disk that come with the phone to help me.

Pls visit buzzdev.net and doenload a better ROM for yr handset and reflash yr device...

Fixing my Imate help still needed PLEASE
How do i flash this thing of mine, i have an imate pocket pc phone edition, i am new to all of this which rom do i get i dont have active sync as the phone just boots to Device authentication failure and wont go any futher than that, how do i get information between the computer and the Imate,
thanks for your help
Sam
(yep another dumb blonde) :?

Re: Fixing my Imate help still needed PLEASE
marsam said:
How do i flash this thing of mine, i have an imate pocket pc phone edition, i am new to all of this which rom do i get i dont have active sync as the phone just boots to Device authentication failure and wont go any futher than that, how do i get information between the computer and the Imate,
thanks for your help
Sam
(yep another dumb blonde) :?
Click to expand...
Click to collapse
You generally need to put it into the bootloader to flash it again if you can't active sync. If you check the wiki you should be able to find your device type and instructions for booting it into the boot loader. Once you've got that done simply plug in the USB cable, wait for your PC to tell you your device is ready, then run the ROM installer.

Related

HELP ME...MAYBE I LOSE MY POCKET PC

Hello everybody
I try to flash my pocket pc (wallaby-xda 1) I follow all the istruction but when the device is restarted does'nt work correctly, :shock: so now the activesync does'n work, I can't see the menu or the configuration, lot of program run badly.
Can I flashing again from my sd? exist a program for this kind of problem?
I forgot to say that : I don't have any copy or backup of my old flash device.
Someone can help me?? :?:
Thank you!!
"Can I flashing again from my sd?"
yes
you can sd flash it you can get a new rom here http://lumpistefan.dyndns.org/
also you may take care not to flash it with a 900/1900 radiostack if your device is a 900/1800 device

Upgrading without activesync

After a interruptus ROM upgrade my s200 d'ont start . after the HTC i have a white screen but not more.
The activesync don't connect and i can't put the ROM another time.
I obtain the multicoloured screen with usb in the left botton.
Please, could anybody help me to update the rom in this situation , mayby without activesync ??
Regards.
Edit/Delete Message
i sugest you ask here
http://forum.xda-developers.com/forumdisplay.php?f=293
as more % of the readers of that forum have the same device as
you then this forum
All is OK , Thank's
Yes thank's, i found a ROM that don't need activesync , after that changing that rom by my rom and at the moment my s200 y ok.
Thank's.
tehe same problem
hi
i have a qtek 8310 and have the same problem that u, could u tell me what kind of rom does not need activesync, please?
thanks a lot
Indeed, I have the same problem with my S200, please explain what you did to fix your phone!
For those interrested: I've found the following text in the readme file of the regular ROM updaters (RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID in this case):
8. Q: I use RUU to update and failed, and my device always boots in three-color mode and cannot enter CE OS anymore, what should I do now?
A: If the update process has failed, you will see that your device will always boot in three-color mode. It’s normal and can be recovered. Please follow the instructions below to reset your device and to establish a connection with the computer.
1. Disconnect your PDA Phone from the USB cradle/cable.
2. Reset your PDA Phone.
3. Reconnect your PDA Phone to the USB cradle/cable.
4. Check that the communication cradle/cable is connected properly.
5. Return to the ROM Update Utility.
Note: You should ignore the ActiveSync connection.

XDA IIs Failed ROM Update - I HAVE READ THE WIKI

A plea to the wonderful XDA Community out there - Please help!
I posted a few days ago under "Blue Angel" that my device was no longer recognising the presence of its SD Card. [ http://forum.xda-developers.com/showthread.php?t=312147 ] Nothing had helped with that situtation so I tried a ROM update as a last resort (knowing I would have to reinstall everything, etc)
The ROM updates I have tried have all failed. I have found several different ROM downloads from various sources, including this website. I have done ROM updates before with no problem and as the post title says, I have read the WIKI so I am not posting this in complete noob ignorance!
Every time, it fails when updating Radio Stack (I have tried V1.12.0, 1.14.0 and 1.15.0) Sometimes the ROM update program says it has encountered an error when updating radio stack. Sometimes it just disappears from the screen on my PC. Sometimes I get a Win32 error.
My device is stuck on "Serial V2.07" bootsplash grey screen.
All this just because it stopped detecting SD card
PLEASE please help, any and all advice v much appreciated.
If someone knows a link to a good, reliable ROM update I would be glad to receive it
P.S. If you think my device is FUBAR then please let me know but I hope not!
I'd try another computer.
Since you can still get into the bootloader mode, there's hope for your device.
Also if your cradle is USB, then it should change from Serial to USB in the bootloader screen when you plug the device into the cradle.
Reply to Wuzy
Wuzy - thanks for the tip, I'll try another computer. Will post further update on here when I've tried that.
For the record, it certainly DOES change to "USB" on the bootloader screen when I dock it into the cradle.
I'm glad to know there is still hope *crosses fingers*
Cradle yr device and flash a suitable ROM.See more in Blue Angel Upgrading section

Magician Bootloader not recognized.Help Plz.

Hi guys,
I beg you help me this mess:
I have O2 mini, ROM version 1.12 Qtek.
My problem:
- Cannot upgrade rom although already in bootloader.(Usb v1.0 device not recognized by my PC, and other PCs).
- Whenever i soft-reset (both by pinning the hole and by software,)the device enters Bootloader. Device can only awake after i removed and put back the battery cover.
I have tried many ways, including mtty.exe, sd upgrade, BL upgrade, other roms, other pcs etc... but cannot solve. I realized that the main problem may comes from that in Bootloader mode, my device cannot be recognized by the PC.
Please help me find a way out, i am so desperate !!! Many thanx
Magician Bootloader
Did you try to disable Active sync USB-Port or kill the wcescomm.exe in Taskmanager?

My QTEK 9000 IS DEAD, PLSSSSS HELP ME

Hello,
I connect my qtek with pc. I tried to install wwe rom - from german to english. I ws downloaded english rom but cant install coz i have problem with COUNTRY ERROR -ERROR 120 atfer that i install in qtek "MaUpgradeUt_noID".exe and after that my qtek go to hell.
when i done hard reset on the screen write only: Serial and v1.00!!!!
..............qtek is dead...................
PLzzzz people help meeeeeeeeee
what can i do now for repair my qtek?????
p.s. srry for my bad english
Kind regards
Your Uni still alive
Try to download "Exit Bootloader.exe" from wiki, conect the uni to USB and Run the applcation...
If you uni is death when the Bootloader is lost. I brick my Jasjar when the Bootloader was gone, dont worry Try to read more in the forum Universal WM6.
AIN1 said:
Try to download "Exit Bootloader.exe" from wiki, conect the uni to USB and Run the applcation...
If you uni is death when the Bootloader is lost. I brick my Jasjar when the Bootloader was gone, dont worry Try to read more in the forum Universal WM6.
Click to expand...
Click to collapse
Hi AIN,
Thnks Mucho Mucho!
My Problem is, that i can only choose Com 1 to Com 3 in mtty 1.42 - Because of this i can't use the methode which is explained. - What i am making wrong? - I use a Sony Vaio Laptop for booting...
Thanks a lot!
if you have the rom try tis out!
1.unzip the file!
2.put the rom-extended rom-radio(or whatever you need!) in this folder
3.when you'll connect the phone on the usb,on the screen you have to see "usb v1.01".
4.run the "MaUpgradeUt_noID.exe"
5.wait till it will finish flashing!!
6.enjoy the new rom!!
qtek pu10 0r 9000 is freeze please big help
please big help / i just try to change language on my qtek 9000 and when the phone finish. and the screen freeze. and i off it and on it .and still the display show but freezing. and it can't connect to the active sync and pc /please help
Try a soft-reset first.
If not, you may have to hard-reset. You will lose all your data and programs you've installed and it will revert to factory state (or last flashed ROM).

Categories

Resources