Related
I was upgrading my XDA2, it said completed, and when i restarted it, the o2 splash screen appears with radio verson 1.17 and thats where it stays... can anyone help. I have tried reinstalling the rom.... but it cant see the pda, and aborts...
Help would be appreciated
Does your device have a bootloader mode? If so get it into, connect usb & start upgrade program. This works on a magician, maybe on yours too?
Regards, M
thank you for the advice, but it is himayalian model.....so i do not know it it has a boot loader.
Read & repair
Hi Smudge,
Take a look at this post & got it from the thread 'stuck in 02 splash screen' at http://forum.xda-developers.com/viewtopic.php?t=25830&highlight=himalaya bootloader 4th post.
RAGOv said:
well my friend i think somehow ur OS is lost and all u still have is the extended rom OS image,that's why u still see the splash screen...
i assume that ur device is a himalaya(though u did'nt mention any informations :wink: ),but if really is,then do the following:
1-log in to this forum as user:xda pass:xda
2-go to ftp server from the wiki page(up left ur screen)
3-go to himalaya folder and download any rom u would like 2 have(it can appear in several way,exe file or several files zipped in a .zip)
4-if it's and exe file and u have winrar,then extract the content in a folder,u will find 6 files(maybe less,rarely 1 file more-xda2nbftool.exe-),now forget about this file for the moment
u will need 2 file to fix ur phone:nk.nbf & HimauUpgradeUt.exe(i idvice u to dowload an O2 rom upgrade to prevent country id error wich can be fixed if necessary )
now that u have the tools,do the following:
1-press power button+navigation pad(the round one between the green and the red buttons)+reset b
utton SIMULTANESLY,u will enter bootloader mode(blank screen with serial on the upper side of the screen,number like 1.06 on the buttom)
2-put the cradle in usb port DIRECTLY IN UR COMPUTER NOT THROUGH USB HUB
3-put ur phone in the cradle while it's in bootloader mode,u will see that the serial word in the upper screen have changed into USB
4-run HimaUpgradeUt.exe and follow the on screen instructions,u will see a status bar,wait untill it finishes,hard reset ur phone,and here we go
i forgot to mension that u should put those 2 files(HimaUpgradeUt.exe & nk.nbf),in a separate folder,close any open task on ur desktop/laptop,and PUT UR CHARGER IN THE CRADLE for the battery don't run out...
hope i helped
tell me what happened with u dude,and remember that ur in the best PDAs developping site in the world,so don't worry,hopefully,everything can be fixed....
RAGO :lol:
Click to expand...
Click to collapse
Cheers, M
Hi,
I made a mistake with flashing QTEK S200 with wrong file.
Bootloader was modified. Device can not start at all.
It can not even go to bootloader screen (red-green-blue).
As consequence, no USB connection can be established.
What is the solution? I guess utilities can not be used, because they assume connection to USB, but there is no connection.
Not big deal, because it was not working well anyways, but would be interesting to know a solution in this case. Many ppl. would be happy to know how to manage this situation, I guess.
later.
Not very good news, service center said they don't know how to fix it, but kept the device to make few things with it.
Clearly, bootloader was overwritten.
Will see. Somehow they manage to identify type of rom is installed from i-mate.
So, think before you make any flashing
re: another service said they will do whatever needed, up to replacing chip with flash. I am not ready to go that far yet.
feel like i am missing something
It appears to be a real problem with flash.
No connection to computer with USB.
With power supply connected blue-green-?? screen, but I cannot connect to PC of course.
With USB cable connected blue-green-?? screen does not come up.
I figured out that pins 4 and 5 are shorten when power supply is connected. I did this with USB connection to PC, but still not connected.
For sure, USB is not functioning on device.
Will get new device, but very interested on how to repair this one. I disassembled it completely. There is no way to replace the flash chip at home, you need specific equipment and chip, of course.
What I need is surcuit diagram for S200 or similar, particularly part of diagram related to flash, radio module is not needed. Is there any possibility to get it? If I have it, I think can reprogram chip.
Thanks.
Hm. It looks like extreemly difficult to get pins layout on motherboard.
JTAG is the only solution left to access chips direct. But we need to know where JTAG pins on motherboard.
Recovered S200.
Finally very good news!
Prophet S200 was succesfully recovered with help of Arc.
He managed to discover JTAG pins, afterwards re-flashed SPL and ROM.
REALLY GOOD JOB!
Want to say special THANKS to Arc!!!
Device go live again.
Until next experiment....
But procedure to recover is in place.
Regards,
fdp24
i have a dead one too
Hi there,
I have a dead one too can you tell me how to fix it please?
dead, as in my ppc k-jam is dead
basically it hangup and i soft restarted, tried hard reset. it didnt help either. i tried restoring to factory default same thing it hangup. now it doesnt shows any signs of life . i lost my life, my buddy.
My Orange SPV M2000 will not start anymore after update. I only see Serial (on top)............ V2.07 (underneath)
I tried to update my ORANGE SPV M2000 to Tmobile's newest rom by extracting the exe. file and using maUpdateut. It started well and all of a sudden gave error "country code................"
You will not be able to fix it yourself.
Equipment and phone required physically in order to connect jtag interface and re-flash DOC.
Sorry, but this is the only solution if your bootloader is damaged.
Of course, you can try to ship it to service center. If you are lucky they will change your device. This might more simple.
Good luck.
fdp24 said:
You will not be able to fix it yourself.
Equipment and phone required physically in order to connect jtag interface and re-flash DOC.
Sorry, but this is the only solution if your bootloader is damaged.
Of course, you can try to ship it to service center. If you are lucky they will change your device. This might more simple.
Good luck.
Click to expand...
Click to collapse
I know how to open device and solder some wires to testpoints. Do you have any information where the pins are located and what software and what JTAG adapter you used? I really need to get my phone working again. It was quite expensive to purchase and to ship it to my country. Please don't destroy my hope.
hello friends,
my cousin recently buy O2 XDa ( wallaby ) for cheap one, i check on device it seems cann't boot to windows but if i hard reset and came up red, green, blue and if i press ok it came up with test all thing i confuse all the test is OK, can you all tell me how to repair the phone and waht is the problem?
thank you
dead device hope on the horizon
note my device and troubles is on the xda2
hi - i have had exactly the same issue - i have managed to reload the rom i was trying to swop and here is what i did .... it took ages and lots of patience and it is not an exact work of science but if you try my method 2 or three times it actually comes back to life ... honest !!
down load an xda2i ( yes xda2i )rom extract it using winrar or zip on your pc place dead xda2 into cradle regardless of whats on screen run himupgradenoid - the rom will run and start to load onto your device it will fail once it has failed remove xda but do nt reset - take copy of original rom which was on the device prior to your failed upgrade and extract as above. replace xda into cradle might be detected or not dont worry - run the himupgradeut from your previous working rom and wait it takes ages to connect but eventually heypresto ... you will have a working device. i know cos i done it !!! - i have not resolved all my problems yet - i still want to load latest 02 rom but even after entering correct device data into nbfs using batch file method the device crashes saying incorrect counry id. - i accidently created my problems by accidently running the wrong upgrade rom and i guess it changed somthing on my device " country code" however when i use method above to get original rom inplace and working when i extract device data into windows folder on device i still see the wwe ( world wide english) so i am still in a pickle - can anyone help me .
hello
i'm working on the project of flashing the bootloader into a totally erased and dead phone. can you send us the test points from the prophet please? and if you know their location on a WIZARD. thank you..
Somebody here Please tell what soft to use with JTAG to recover da bootloader!!!!!!!!!!!!!
get the JTAG pins for me, I will send you soft.
Wizard and Charmer pins are both needed.
hi, i've succesfully wrecked my Blueangel PH20B by flashing a modded wm6-universal-rom... i've got all the hw & sw to resurrect the phone but the jtag pins on the BA-PCB...
can someone give me a hint where i may find them? (i'm not wanting to bake the pcb as i know i'll wreck it comletley)
thanks in advance,
mario
Same problem here
Hi,
I believe I'm having the same problem
Please help me
Thax a million
so can you help me i need to write the wizard(g4) bootloader or thell me how can i do this
T-Mobile USA SDA II
Me also, i'm i need of re-writing boot-loader of T-Mobile USA SDA II
well, ok I understand that you can get the Jflash_mm working with PXA systems, you can write the definition for yourself, as for the CPU.
but I have serious doubts that inspire me to suggest you will have tiny chance to actually program a DiskOnChip Millennium series (or familiar) chip used in many platforms (actually I believe most HTC devices).
after all this means that if you are not working for (or in affiliation or partnership with) SanDisk, you are not in position to program bootloader to (not limited to) UNIVERSAL, WIZARD, PROPHET, and CHARMER (and if I remember well, BLUEANGEL and HIMALAYA) devices over JTAG.
any news............
Hello, i recently tryed to flash a new rom on my magician and when i was flashing it the magician went down ( discovered later that i didnt fully charged the battery ... i know ... im a noob ) , now appears "No Gsm" when i turn on the pda. I can go to windows i can flash Rom + Extrom, i cant upgrade via sdflash it gives me an error " Not Allowed " what is this ? I've tryed several commands in console but no sucess. Can this be fixed whiout jtag way ? Please help me out. Regards
Can any1 help me out ?
can anybody know about it. .
i have a HP iPAQ 614c and after bios upgrade ( bios is not suporting my phone, but i read that after) they cant start. . . bootloader is dead (cant use any combination of keys to enter in bootloader) . .and i was reading that the only metod is a JTAG . .re-programing flash memory. . i would make a JTAG cable but i cant find testpoints on ipaq. . can somebody knows how to help me?
p.s. i was searching on the internet and i cant find any service manual. . .
anybody
is this possible. . that nobody know solution ???
I'm trying to find a solution
while connected to your phone and set up a jtag
prepared eboot.bin
need to learn from eboot.bin
address at which he wrote in RAM
and run
but so far I do not know the address
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
try doing a hard reset not just a soft reset that might help
medo_punsher said:
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
Click to expand...
Click to collapse
if u have loaded hardspl then hold power button + OK button on sides of phone and then stick stylus into reset button an dthis should get u 2 red, green, white, blue colour screen and then plug usb in and re-flash
get hermes in bootloader mode, connect USB cable and flash with this http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
Activesync doesn't need to be runing.
download mtty and do like he said here "http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen" (copy all text between " " and paste to your browser).
After "set 14" give "task 8"
Try flashing from SD card, first the HardSpl ant then the Original Stripped ROM.
@TheMim : tried but didnt work
@eryunt : how ?? i have a custom rom with the name HERMIMG.nbh on my sd card but it doesnt upgrade it says loading for a few seconds then some red numbers and letters appear at the top of the screen then it goes into the bootloader and doesnt upgrade
NOTE THAT : i dont have hard spl (no supercid)
Thnx again , plz help
Try downloading HARDSpl7 from here:
http://forum.xda-developers.com/attachment.php?attachmentid=35136&d=1173326890
Unzip it and rename the file "RUU_signed.nbh" in "HERMIMG.nbh"; put it on SD and so you will flash the HARDSpl.
Then, make the same thing with the file "RUU_signed.nbh" extracted from an original shipped ROM.
Hope it fixes your Tytn
Many thanks for your help , i will try that tomorrow but one final question ,
How can i access my sd card with no phone ?? do i need an external sd-to-usb device or something like that ??
medo_punsher said:
How can i access my sd card with no phone ?? do i need an external sd-to-usb device or something like that ??
Click to expand...
Click to collapse
Yes, you need an SD-Reader for your PC
Okay , now i have a cooked rom on my sd card (fat32 formatted) named HERMIMG.nbh when i get into bootloader it says loading for a few second then a red number "00068002" appears at the top of the screen and it continues to the tri-colour bootloader
any help ??
Have You already installed HARDSpl correctly via SD-card?
No , i didnt but will it work or i will get the same red number ??
PS : my bootloader version is 1.04 so i guess i dont need hard spl as this one can flash any rom , right ??
medo_punsher said:
No , i didnt but will it work or i will get the same red number ??
PS : my bootloader version is 1.04 so i guess i dont need hard spl as this one can flash any rom , right ??
Click to expand...
Click to collapse
Try downloading HARDSpl7 from here:
http://forum.xda-developers.com/attachment.php?attachmentid=35136&d=1173326890
Unzip it and rename the file "RUU_signed.nbh" in "HERMIMG.nbh"; put it on SD and so you will flash the HARDSpl.
Then, make the same thing with the file "RUU_signed.nbh" extracted from an original shipped ROM.
JUST FOLLOW ALL THE STEPS ABOVE
No no no no..... HSPL cant be upgraded now via SD card cause th SSPL was unsuccesfull!!!!!.....
Get a XP PC... your batt must be 50% charged or more "better", a working USB cable
NO SD CARD inserted... your XP pc must have NET frameworks 3.5
put your device in bootloader mode.... and upgrade any stock rom to rewrite a valid SPL cause your is corrupted now
then when you get a stock rom working via SSPL you will be able to redo the steps to flash HSPL V7