I got an audiovox 6600 phone which doesn't have buildin wi-fi, so i bought a spectec SD wi-fi card and after i install the driver and test the card, it won't sync with pc anymore. i always get this error 608 from activesync. please help. thx.
Hi yyhsiao!
Make sure you installed the correct driver for your version of Windows Mobile. If the problem holds try doing a hard reset. That usually sorts out such problems.
Related
Yesterday everything was OK. My sandisk ultra II SD/USB was working fine.
Today the card works great connected to a PC throught USB or SD, but my Qtek 9090 doesn't reconize it.
Tried flashin radio, rom, instaled WM5 and also formating the card throught windows, but nothing works!!
When I insert the card, the PDA turns on and turns on the light also.
When I remove the card the same thing happens.
Tried my SD in other PDA and works OK.
Tried other SD in my PDA and does not reconize.
Why isn't the card being recognized by the Qtek?
NEED HELP!!!
Thanks
OK... I see no one has any solution form me.
Were can I buy a Qtek9090 motherboard??
Anyone can help me please!!!!!
I have a XV6600, today I try to upgrade my rom to a newer rom, but while upgrading my handheld show only serial V1.02 not USB V1.00. I try to soft and hard reset but it won't do anything.....please help me I need my handheld to back operational properly.....please....anyone outhere....I'm very desperate.......
Just some suggestion:
If you put a SD CARD in card slot, take it out.
Disable your USB connection of MS ActiveSync, plug the sync cable, notice the display.
Final solution, reflash it with SD image.
Thx Ahe,
Now my device show
Section=1
Not Alow
I try to reflash with my old rom,but somehow it not work...any suggestion for the problem?
My device the one that have SIM card...
I am using O2 XDA IIs PPC 2003 SE.
Now when I insert my SD Card 2 GB, the OS does not recognize it.
(It was good before.)
I've tried with another 256 SD Card, same result.
Those SD Cards are working well with my Card Reader plugged into my PC.
Anyone could help me please?
Thanks in advance.
I'm sorry I don't know.
However.. you've come to the wrong place if you want help.. people here seem to have an aversion to actually helping people out.. don't get me wrong, there are some very talented people that call this forum 'base', but they are understandably busy.. and the other's who hang just don't answer **** unless it suits them..
You are more likely to get the answer "read the wiki" which isn't the most helpful thing in the world. Even those of us who try others to help despite our knowledge being somewhat wanting.. just in the hopes of being seen to be at least trying, aren't deemed to be worth giving an answer to.
I suggest these two forums.
http://www.ipmart-forum.com/index.php
http://www.totalpda.co.uk/forum/
You will get help there.
Try soft resetting the device, poke the stylus in the reset hole and once the device re-boots it should see the card, you will not loose information performing a soft reset - Mike
thanks guys.
Hi, I've also have a sort of problem like yours. I tried soft reset n it actually works. But sometimes my BA still can't read my SD. I've tried format my SD n even upgrade my ROM. It seems that the problem is in hardware. I don't know what to do anymore
U have probably what I also have.. a faulty SD card reader or a bad soldering (welding)...
Last night I dissambled my BA n I found out that the screws around SD card reader were loose. I've tightened them up n so far I don't have any problem with SD card. But I've still exprerienced problem with my screen keep active when my BA was pressed even though I've locked the device n power off. I don't know what to do anymore. Any suggestion?
Problem already solved.
It was because tiny plastic dirts on the SD slot.
Once I cleaned it up, it's working as before.
Thanks to you all. What a nice forum we have here.
I had similar problems with a 1GB card. Formatting it in a PC-based card reader fixed it. Remember not to select quick format.
Can I put a 4GB SD Card in the Blue Angel? Will it work?
noone85 said:
Can I put a 4GB SD Card in the Blue Angel? Will it work?
Click to expand...
Click to collapse
It will work if the card is *NOT* a SDHC card.
I found my 4 gig card on ebay, topram is the brand, and it works fine as it is a non-SDHC card.
Sdcard not reconized
HI TO ALL..
I had installed miopocket 4.0 on my VDO Dayton PNA6000-WINCE 5 but
because of problems with Garmin XT I had to uninstall but the uninstall
did not do the best for me, now my SD slot dont read any sdcard i think
its corrupted registry and i dont have access to usb active sync only
have MTP (Media Transfer Protocol) when i connect to usb(no data
transfer). How can i access my resident flash(INTERNAL MEMORY) to edit
registry,change usb mode to activesync or something else???, i think sdmemory.dll is making
load problems.
Tnx in advance!
To have access to registry use TotalCommander or SKTools
but i dont have access to system, sdslot is not functional and i cant install active sync driver just mtu in device manager..
HI
I have one little problem with microSD card! When I copy some files on card with ActiveSinc or with mobile, speed is 35 Kb/s!!! When I copy the same file with card reader speed is 3-5 Mb/s!!! Is this a problem with my Hermes (AT&T 8525) or with ROM (Shap's 3.60, 4.0, ..., 4.30)? Maybe SDHC driver is problem or something else? Anyone tried some other ROMs?
Are you using vista? I experience the same thing, but only under vista
i am experiencing this as well
using the card reading da speed is very fast
What ROM are you running? Some with SDHC driver?
I am also facing the same problem. I am using vista and Schap's full rom 4.31. Not sure what to do.
At&t 8525
olipro 2.10
I noticed the same - Fixed the problem by using WM5torage and I had write speed
Maybe WM5torage fix the problem when coping from computer to phone (SD) but when I copy from phone to SD card its slow (when I'm recording something with VITO AudioNotes to SD it says that my device is slow and I can't record for a long time)!!! Anyone tried with generic (not custom built) ROM?
Maybe you can use the format of FAT.
This has always been the case when transfering files onto the card via activesync.........just unfortunatly the way the software transfers the files to the device and then to the SD card from there.
As said above, ive overcome the problem with the use of a card reader or using WM5torage.
OK! But my question was is there any way to speed up write speed phone to sd? I always transfer files from my computer with card reader but some PPC programs (VITO Audionotes) are complaining about sd speed and it wouldn't work as they should! Is this problem with SDHC driver or is it device?
Try to change File System cache...
HKLM\System\StorageManager\FATFS\CacheSize
I set CacheSize to 512 and work fine with this settings. Look at this settings in your registry and try to change other parameters.
No! The problem is still there! Something else?
What card are you using ?
Benchmark your memory card with SPB Benchmark or Pocket Mechanic and post here the results..
WM5 Storage on my Schaps 4.22
Ok, I thought I saw WM5 storage in my Rom,, but now that you mention it,,I can't find it (unless it was there on a previous Rom , and not there now). I think ,last time I dug it up by accident, I was asking myself what the hell this SW was used for. So, for speeding up things, how do I use WMstorage to enhance download from PC to SDcard installed on Device? Found WM5Storage through file explorer,,tried it , but can't get my PC to see SDcard..
I would think about the low usb 1.1 speed.
USB 1.1 is slow but not that slow and I am copyng from phone to SD card so this is not a problem and the SD card is also not a problem because i tried few different cards and the result is the same!
using o2 original rom
i cant upgrade as i cant connect via usb
anyway.......... my sd card keeps vanasishing and i have reboot the phone anyone got any ideas how stop it?
Hi,
I had the same problem. I had installed a cab to enable SDHC-support to my artemis. Unfortunately this cab was not designed for the artemis but for the HTC Universal. After deinstallation of this SDHC-patch the problem vanished.
Hope I could help you with this answer...