Yesterday everything was OK. My sandisk ultra II SD/USB was working fine.
Today the card works great connected to a PC throught USB or SD, but my Qtek 9090 doesn't reconize it.
Tried flashin radio, rom, instaled WM5 and also formating the card throught windows, but nothing works!!
When I insert the card, the PDA turns on and turns on the light also.
When I remove the card the same thing happens.
Tried my SD in other PDA and works OK.
Tried other SD in my PDA and does not reconize.
Why isn't the card being recognized by the Qtek?
NEED HELP!!!
Thanks
OK... I see no one has any solution form me.
Were can I buy a Qtek9090 motherboard??
Related
I am using O2 XDA IIs PPC 2003 SE.
Now when I insert my SD Card 2 GB, the OS does not recognize it.
(It was good before.)
I've tried with another 256 SD Card, same result.
Those SD Cards are working well with my Card Reader plugged into my PC.
Anyone could help me please?
Thanks in advance.
I'm sorry I don't know.
However.. you've come to the wrong place if you want help.. people here seem to have an aversion to actually helping people out.. don't get me wrong, there are some very talented people that call this forum 'base', but they are understandably busy.. and the other's who hang just don't answer **** unless it suits them..
You are more likely to get the answer "read the wiki" which isn't the most helpful thing in the world. Even those of us who try others to help despite our knowledge being somewhat wanting.. just in the hopes of being seen to be at least trying, aren't deemed to be worth giving an answer to.
I suggest these two forums.
http://www.ipmart-forum.com/index.php
http://www.totalpda.co.uk/forum/
You will get help there.
Try soft resetting the device, poke the stylus in the reset hole and once the device re-boots it should see the card, you will not loose information performing a soft reset - Mike
thanks guys.
Hi, I've also have a sort of problem like yours. I tried soft reset n it actually works. But sometimes my BA still can't read my SD. I've tried format my SD n even upgrade my ROM. It seems that the problem is in hardware. I don't know what to do anymore
U have probably what I also have.. a faulty SD card reader or a bad soldering (welding)...
Last night I dissambled my BA n I found out that the screws around SD card reader were loose. I've tightened them up n so far I don't have any problem with SD card. But I've still exprerienced problem with my screen keep active when my BA was pressed even though I've locked the device n power off. I don't know what to do anymore. Any suggestion?
Problem already solved.
It was because tiny plastic dirts on the SD slot.
Once I cleaned it up, it's working as before.
Thanks to you all. What a nice forum we have here.
I had similar problems with a 1GB card. Formatting it in a PC-based card reader fixed it. Remember not to select quick format.
Can I put a 4GB SD Card in the Blue Angel? Will it work?
noone85 said:
Can I put a 4GB SD Card in the Blue Angel? Will it work?
Click to expand...
Click to collapse
It will work if the card is *NOT* a SDHC card.
I found my 4 gig card on ebay, topram is the brand, and it works fine as it is a non-SDHC card.
Sdcard not reconized
HI TO ALL..
I had installed miopocket 4.0 on my VDO Dayton PNA6000-WINCE 5 but
because of problems with Garmin XT I had to uninstall but the uninstall
did not do the best for me, now my SD slot dont read any sdcard i think
its corrupted registry and i dont have access to usb active sync only
have MTP (Media Transfer Protocol) when i connect to usb(no data
transfer). How can i access my resident flash(INTERNAL MEMORY) to edit
registry,change usb mode to activesync or something else???, i think sdmemory.dll is making
load problems.
Tnx in advance!
To have access to registry use TotalCommander or SKTools
but i dont have access to system, sdslot is not functional and i cant install active sync driver just mtu in device manager..
i just got my qtek 9100. so dont use thos fancy words or something while commenting this pls iam totaly new to pocket pcs. i got myself a 1gb sandisk minisd card. when i put it in the phone the phone '' sometimes'' ask me if i want to formate it so it can be read but if i let the phone try to formate the card the whole phone just hangs up. i have tried to use a card reader on my pc to formate it to both fat and fat32 and still doesent work. i have resetted the phone twice. i have no idea what to do.. any of you who know?
I have been using Touch 4.02 with an 8gb card for ages now with no troubles then yesterday the storage card is no longer recognised by the phone? I tried the usual soft reset, taking the card out wiping it put it back in still no joy.
Reinstalled the sdhc cab file didnt work, Have just re-flashed with the new diamond look a like rom and still it aint recognising the card.
Has anyone got any ideas??
mikehulme1983 said:
I have been using Touch 4.02 with an 8gb card for ages now with no troubles then yesterday the storage card is no longer recognised by the phone? I tried the usual soft reset, taking the card out wiping it put it back in still no joy.
Reinstalled the sdhc cab file didnt work, Have just re-flashed with the new diamond look a like rom and still it aint recognising the card.
Has anyone got any ideas??
Click to expand...
Click to collapse
Probably your card is broken....
Try to insert it in a card reader and see if it recognizes the card....
Yeh will have to wait till I get home not sure my memory card supports SDHC though?
I have a similar problem, and like you I've been happily using an 8gb card for a while, but in the last week it has stopped working correctly.
Occasionally it is fine, but most of the time access to the card is either very slow or it doesn't appear at all.
I've tried the following but with no success:
- Using another MicroSD card (2gb)
- Reading the cards in a card reader and they are fine
- Reinstalling Artemis Touch 4.02 WM6.1
- Formatting the card (FAT32)
- Shimming the MicroSD card with bits of cardboard as I've read there can be a loose fit
- Cleaning the contacts on the card reader
- Pulling the contact pins out a bit to get a better fit
Does anyone have any ideas of anything else to try?
Does WM5torage work?
I did the followings to make my 4GB Micro SD usable by my Artemis:
1-flashed it to FAT32 in my laptop (I Had to format my laptop partition D of my HDD to FAT32 to make the microSD recognizable by my NTFS system).
2-copied the "system folder" from my older 512 MGB card as it is (hidden) to the root of my 4GB
3-The 4GB is readable by my artemis by now.
4-To make sure the crad will be working good in the future, I installed the "Flashcard" Cab in my Artemis and reflashed the card to FAT32, 512 Bytes 4KB clusters.
The card is just fine under Artemis windows, but I gatta take it out when flashing any new ROMs or Radio.
Hope that'd help you.
uniqueboy said:
Does WM5torage work?
Click to expand...
Click to collapse
No - WM5torage behaves the same ... i.e. occasionally works (if the phone can see the card), but most of the time it just reports an error
It is deffothe memory card just put my old 2gb back in the phone and it worked, I have tried the 8gb in my PC card reader and in y camcorder that takes sdhc and neither recognised it.
This explains why my phone started goin so slow it would take ages to do anything then the memory card was unrecognised a few days later.
Im guessing there is no way to repair these?
If you can't read it, you can't do anything...
R.I.P.... :|
Cheers
Gutted oh well
not as gutted as i am ... looks like i'll have to buy a new phone!
Just try to format it by these criteria
FAT32, 512 Bytes 4KB clusters
then let us know.
dude dont panic try to recover the card first before you format it. i am sure there are some imp data there eh?
use a disk recovery utility on ur pc
my best choice is Recover My Files http://www.recovermyfiles.com/
if you are using windows os also try to run scan disk
use pocket mechanic then on ur ppc
let us know how well u do
Sorry for posting...Wrong thread...
ok so my batt went flat in my Desire lastnight got home pluged it in turned it on and got a message saying SD card corrupt please format, i thought oh god i got unrplacable things on that card the desire wouldnt see the card no matter how many time i pulled it out then back in, so i tryed my HTC blackstone, same results didnt see it at all there again oh god unreplaceable files on card i MUST get back, looked on net it said about formatting it then recovering files so i almost did that, BUT i tryed the card in my SPV M3100 and the card works FINE ??????? i have now backed up all the files to my PC
But what gives here ??? both HTC phones say the card is corrupt yet the SPV sees it ok and works ok ??
cheers
Mike
Get a MicroSD adapter and recover/copy the files to your PC. Then either format it on your PC or put it in your phone and get it to format it, then copy the stuff back.
Hi guys, I need assistance!
I recently bought a Samsung Class 6 microsd card for the HTC Desire. It DEFINITELY works because when I connect it to my laptop with a microsd adapter it recognizes it just fine. However, my phone is unable to recognise the sdcard. In storage, it says 'unavailable'. I tried my old sd card in my phone and it works perfectly fine and connects to the computer via usb so it's not the phone. I'm not sure what the problem is.
I flashed the manu 2.0.5 kernel yesterday and am using cm7.1 ROM. Could that have anything to do with it? If so which kernel would you recommend for cm7.1?
Oh and I forgot to add that the NEW Samsung sd card works perfectly fine whilst I'm in recovery and it connects via USB to the computer.
I've had this problem and it seems to stem from damaged partitions.... have you been disconnecting your phone without ejecting from windows? even if all the transfers are complete and you have clicked disconnect on the phone, what if there was a write delay? anyways backup your sd card n sdext, re partition it, and copy back your files.... all should work... well it did for me anyways...